Q-Switched Ytterbium-Doped Fiber Laser Using Black Phosphorus as Saturable Absorber

We demonstrate a Q-switched ytterbium-doped fiber laser(YDFL) using a newly developed multi-layer black phosphorous(BP) saturable absorber(SA).The BP SA is prepared by mechanically exfoliating a BP crystal and sticking the acquired BP flakes onto a scotch tape.A small piece of the tape is then placed between two ferrules and incorporated in a YDFL cavity to achieve a stable Q-switched operation in a 1.0 μm region.The laser has a pump threshold of 55.1 mW,a puise repetition rate that is tunable from 8.2 to 32.9kHz,and the narrowest pulse width of 10.8 μs.The highest pulse energy of 328 nJ is achieved at the pump power of 97.6mW.Our results show that multi-layer BP is a promising SA for Q-switching laser operation.     

Passively Q-Switched Nd：KLuW Laser with Semiconductor Saturable Absorber

We demonstrate a passively Q-switched Nd：KLu W laser with a semiconductor sat urable absorber mirror （SESAM） at wavelength 1070 nm. At a pump power of 1.3 W, the pulse width is measured to be about 17ns with repetition rate of lOkHz and with the average output power of 260roW. To our knowledge, this is the first demonstration of Nd：KLuW used for passively Q-switched laser with an SESAM.     

Multi-Wavelength Q-Switched Ytterbium-Doped Fiber Laser with Multi-Walled Carbon Nanotubes

We demonstrate a passively multi-wavelength Q-switched Ytterbium-doped fiber laser (YDFL) based on a multi-wall carbon nanotubes embedded in polyethylene oxide film as saturable absorber. The YDFL generates a stable multi-wavelength with spacing of 1.9 nm as the 980 nm pump power is fixed within 62. 4 mW and 78.0 mW. The repetition rate of the laser is tunable from 10.41 to 29.04 kHz by increasing the pump power from the threshold power of 62.4 mW to 78 mW. At 78 mW pump power, the maximum pulse energy of 38 nJ and the shortest pulse width of 8.87 µs are obtained.     

基于金纳米棒可饱和吸收体的被动调Q掺铒光纤激光器

利用种子诱导生长法制备了长径比为5的金纳米棒,测量了它的吸收谱,结果表明该纳米棒具有较宽的吸收带（800~1 600 nm）。进一步测量了它的非线性吸收性质,结果表明它在1.56 μm波长处具有可饱和吸收特性,有望被用于实现被动调Q脉冲激光的输出。将该可饱和吸收体置于掺铒光纤激光器腔内,当泵浦功率增至30 mW时开始有稳定的调Q脉冲激光输出,输出激光的工作波长为1.56 μm。当泵浦功率为205 mW时,可获得的最大输出功率约6.9 mW,脉冲能量达219 nJ。研究结果表明,这种新型可饱和吸收体在脉冲激光领域具有广阔的应用前景。     

An Easily Switchable Dual-Wavelength Passively Mode-Locked Erbium Fiber Laser

A simple scheme of switchable dual-wavelength passively mode-locked fiber laser is demonstrated. The laser can be flexibly switched among different mode-locked states simply by tuning the cavity loss while keeping all the other cavity parameters fixed. As the cavity loss increases, the mode-locked fiber laser operates at the long-wavelength, dual-wavelength, and short-wavelength states, successively. In addition, these states can be conveniently switched without losing the mode-locked operation and the switching process is reversible as the cavity loss decreases. The mechanism is qualitatively explained by the balance between the fiber gain and the cavity loss.     

Q-Switched Thulium-Doped Fiber Laser with Pure Titanium-Film-Based Saturable Absorber

ABSTRACT

We demonstrate the generation of Q-switching pulse train in thulium-doped fiber laser (TDFL) cavity by employing titanium-based saturable absorber (Ti-SA). The Ti-SA was fabricated by depositing titanium particles molecules using electron beam evaporation on the surface of a polyvinyl alcohol (PVA) film. Subsequently, stable Q-switched pulses were obtained within the 1,552 nm pump power range from 272.1 to 467 mW, with repetition rate tuned from 21.8 to 39.1 kHz. At the maximum pump power, the TDFL showed that the pulse duration of 2.22 μs and the maximum pulse energy of 124 nJ.     

利用光纤光栅的高功率掺镱光纤激光器

报道了利用一对光纤光栅作为双包层Yb^3 掺杂光纤激光器的谐振腔，激光二极管光纤模块(LD)进行了抽运，并采用锥形光纤实现了全光纤化结构，获得了高功率双包层光纤激光器。光纤光栅通常是用融接技术实现与双包层光纤的一体化连接的，采用的双包层光纤为内包层为梅花瓣形结构的掺Yb^3 离子的石英光纤，采用的抽运源为中心波长为970nm的半导体激光光纤输出模块，在抽运源电流达到2．4A时，获得了10．8W的光纤激光器单横模输出，输出波长1100．5nm，峰值半峰全宽(FWHM)为0．54nm，激光器斜效率为59％。     

Passively Q-Switched Nd:YVO_4 Laser Using a Gold Nanotriangle Saturable Absorber

A passively Q-switched Nd:YVO_4 laser at 1064 nm is demonstrated based on a gold nanotriangle saturable absorber(GNT SA).Under a pump power of 3.82 W,the maximum average output power of 218mW is achieved,corresponding to a slope efficiency of 12.9%.The minimum pulse width is 165ns and the maximum pulse repetition rate is 300kHz at the pump power of 3.48 W.Our results prove that the GNT SA is a promising saturable absorber for near-infrared lasers.     

Q-Switched Raman Fiber Laser with Molybdenum Disulfide-Based Passive Saturable Absorber

We demonstrate a Q-switched Raman fiber laser using molybdenum disulfide(MoS_2) as a saturable absorber(SA).The SA is assembled by depositing a mechanically exfoliated MoS_2 onto a fiber ferrule facet before it is matched with another clean ferrule via a connector.It is inserted in a Raman fiber laser cavity with a total cavity length of about 8 km to generate a Q-switching pulse train operating at 1560.2 nm.A 7.7-km-long dispersion compensating fiber with 584 ps·nm~(-1)km~(-1) of dispersion is used as a nonlinear gain medium.As the pump power is increased from 395 mW to 422 mW,the repetition rate of the Q-switching pulses can be increased from 132.7 to137.4kHz while the pulse width is concurrently decreased from 3.35μs to 3.03μs.The maximum pulse energy of 54.3nJ is obtained at the maximum pump power of 422 mW.These results show that the mechanically exfoliated MoS_2 SA has a great potential to be used for puise generation in Raman fiber laser systems.     

Harmonic Mode-Locked Er-Doped Fiber Laser Based on a Microfiber-Based PbS Nanoparticle Saturable Absorber

Lead sulfide (PbS) is a nanomaterial with excellent optical and chemical properties, such as a narrow bandgap (0.37 eV), high thermal damage threshold, and high stability. Obviously, it is appropriate as a saturable absorber (SA) device for ultrafast photonics. However, PbS nanoparticles (NPs) as the SA of ultrashort harmonic mode-locked pulse still haven't been demonstrated at present. In this paper, the PbS NPs are made into an SA-device-based microfiber by optical deposition method and connected in an integrated Erbium-doped fiber laser. And both characteristics and nonlinear optical properties of PbS NPs have been systemically investigated. A fundamental frequency mode-locked pulsed laser is proposed, whose central wavelength is 1560 nm, and the pulse width is 1 ps. In addition, high repetition rate operations are achieved, with a maximum repetition rate of 833 MHz. This is the first time that PbS NPs are used to generate 96th-order harmonic mode-locking, and the corresponding pulse duration is 987 fs. It is demonstrated that PbS NPs are a kind of SA photonic material with excellent performance. It can improve the communication capacity by applying fiber communication, and it has potential application value even in material processing and optical comb.     

A Single-Longitudinal-Mode Passively Q-Switched Nd:YVO_4 Laser Using Black Phosphorus Saturable Absorber

A black phosphorus(BP) saturable absorber(SA) solution with different concentrations(1.0 and 0.5 mg/ml) is fabricated with the liquid-phase exfoliation method. By using the BP-SA, a compact diode-pumped passively Q-switched Nd:YVO_4 laser is demonstrated. One reflecting Bragg gratings is used as the output coupler for mode selection. By inserting those BP-SA solutions in the laser cavity, the maximum single longitude mode,Q-switched output powers of 126 mW at 692.5 kHz and 149 mW at 630.3 kHz are achieved at the pump power of 8.0 W, corresponding to the pulse durations of 144 ns and 196 ns, respectively. Moreover, longitudinal-mode characteristics of Q-switched output laser in different optical cavity lengths based on two-kind BP-SA solution concentrations are investigated. Our results show that BP-SA could also be developed as an effective SA for the Q-switched, single longitudinal mode pulse laser.     

Cadmium Selenide Polymer Microfiber Saturable Absorber for Q-Switched Fiber Laser Applications

We demonstrate the generation of a Q-switching pulse train in an erbium-doped fiber laser(EDFL) cavity using a newly developed cadmium selenide(CdSe) based saturable absorber(SA). The SA is obtained by embedding CdSe nanomaterials into a polymethyl methacrylate(PMMA) microfiber. It is incorporated into an EDFL cavity to generate a Q-switched laser operating at 1533.6 nm. The repetition rates of the produced pulse train are tunable within 37-64 kHz as the pump power is varied from 34 mW to 74 mW. The corresponding pulse width reduces from 7.96μs to 4.84μs, and the maximum pulse energy of 1.16 nJ is obtained at the pump power of74 mW.     

外延单片式激光二极管抽运被动调Q微激光器

基于液相外延工艺,实现了一种结构新颖的单片式被动调Q微片激光器。采用了在激光介质Nd3 ∶YAG表面直接液相外延生长一层具有饱和吸收特性的Cr4 ∶YAG膜的微谐振腔的结构,由于是同质外延生长过程,能够确保饱和吸收体与增益介质间(Nd3 ∶YAG/Cr4 ∶YAG)良好的界面特性。采用光纤耦合激光二极管,在激光二极管输出为1W的抽运条件下,实现了峰值功率近千瓦、稳定重复频率在4kHz以上、脉宽1.8ns、TEM00单横模式、波长1.064μm的调Q脉冲序列输出。在对新型单片式微激光器的性能报道的基础上,阐述了外延单片式结构及其相应工艺的潜在优势。     

基于微纳光纤-单壁碳纳米管可饱和吸收体的被动调Q掺镱光纤激光器

为实现具有高脉冲能量的调Q脉冲激光输出,利用微纳光纤-单壁碳纳米管复合的方法制备可饱和吸收体,并对基于该类型可饱和吸收体器件的被动调Q掺镱光纤激光器进行研究。采用拉伸法将普通单模石英光纤拉制成微纳光纤,将其与单壁碳纳米管溶液复合,进一步制备成全光纤集成型器件。将该器件置于环形腔掺镱光纤激光器中,利用976 nm半导体激光器作为抽运源。当抽运功率为53 mW时,实现了调Q脉冲激光输出,激光中心波长为1 039 nm。进一步提升抽运功率至76 mW,可获得脉冲宽度为3.1μs、重复频率为25.5 kHz、单脉冲能量为941nJ的调Q脉冲激光输出。研究表明,利用微纳光纤制备的可饱和吸收体器件具有较高的损伤阈值,可用于实现高脉冲能量的激光输出。     

角锥棱镜腔激光二极管抽运被动调Q激光器

为了提高传导冷却条件下激光二极管(LD)侧向抽运被动调Q激光器的光束质量和输出稳定性,采用了两组半圆柱面激光二极管阵列侧向交错抽运两根串接的激光棒,实现了均匀抽运和散热。通过实验分析了横模结构对被动调Q稳定性的影响,设计了角锥棱镜-高斯输出镜非稳腔,在显著提高器件光束质量的同时,明显改善了被动调Q的稳定性,并保证了谐振腔的机械稳定性。在此基础上研制了一台重复频率20 Hz、单脉冲能量64 mJ、脉冲宽度7 ns、稳定性优于±5%、光束发散角0.6 mrad、光-光效率9.1%,且光轴指向稳定的工程实用器件。     

Passively Q-Switched EDFL Using a Multi-Walled Carbon Nanotube Polymer Composite Based on a Saturable Absorber

A stable passive Q-switched erbium-doped fiber laser （EDFL） operating at 1563.5 nm is demonstrated by using a multi-walled carbon nanotube （MWCNT） polymer composite film based saturable absorber for the first time. The composite is prepared by mixing the MWCNTs homogeneous solution into a dilute PEO polymer solution before it is left to dry at room temperature to produce thin film. Then the film is sandwiched between two FC/PC fiber connectors and is integrated into the laser cavity for Q-switching pulse generation. The EDFL generates a stable pulse train with repetition rates ranging from 4.5 kHz to 20.0 kHz by varying the 1480 nm pump power from 35 mW to 53 mW. At the 53 mW pump power, the pulse width and pulse energy are 8.8 μs and 15.3 nJ, respectively.     

Q-Switched Erbium-Doped Fiber Laser Using Cadmium Selenide Coated onto Side-Polished D-Shape Fiber as Saturable Absorber

A stable Q-switched erbium doped fiber laser emitting at 1558 nm is demonstrated using a cadmium selenide(CdSe) material coated onto a side-polished D-shape fiber as the saturable absorber(SA). By elevating the input pump power from the threshold of 91 mW to the maximum available power of 136 mW, a pulse train with a maximum repetition rate of 57.44 kHz, minimum pulse width of 3.76 us, maximum average output power of7.99 mW, maximum pulse energy of 0.1391 uJ, and maximum peak power of 36.99 mW are obtained. The signalto-noise ratio of the spectrum is measured to be around 75 dB. This CdSe based SA is simple, robust, and reliable,and thus suitable for making a portable pulse laser source.     

Experimental Study of a Pulsed Ytterbium-Doped Fibre Laser with Fast and Slow Saturable Absorbers in a Linear Cavity

We present a linear-cavity stretched-pulse fibre laser and by semiconductor saturable-absorber mirrors. A with mode locking by a nonlinear polarization rotation Q-switched mode-locking cw train and a mode-locking pulse train are obtained in the experiment. We investigate the effects of the equivalent fast saturable absorber and the slow saturable absorbers in experiment. It is found that neither the nonlinear polarization evolution effect nor a semiconductor saturable absorber mirror is enough to produce the stable cw mode-locking pulses in this experiment. A nonlinear polarization evolution effect controls the cavity loss to literally carve the pulses; semiconductor saturable absorber mirrors provide the self-restarting and maintain the stability of the modelocking operation.     

1.15 W Passively Q-Switched Operation Of Tm:YAlO3 Laser with MoS2-Based Saturable Absorber

Journal of Russian Laser Research - In this study, we present a passively Q-switched (PQS) operation of Tm:YAlO3 (Tm:YAP) laser with a MoS2-based saturable absorber (SA). In the PQS mode, an...