In situ observation of the pressure-induced mesophase for 4′-n-hexadecyloxy-3′-nitrobiphenyl-4-carboxylic acid

In situ observation of the optical texture, and X-ray patterns of the pressure-induced mesophase seen for 4′-n-hexadecyloxy-3′-nitrobiphenyl-4-carboxylic acid (ANBC-16) was performed under hydrostatic pressures up to 100MPa using a polarizing optical microscope equipped with a high pressure hot stage and a wide angle X-ray diffractometer equipped with a high pressure vessel respectively. It was found that the pressure-induced mesophase (hereafter refered to as ‘X’) appeared at pressures above 60 MPa, and exhibits a birefringent broken-fan or a sand-like texture that remain unaltered in the SmC phase. The POM-transmitted light intensity curve measured on heating clearly showed the Cr₄ → Cr₁ → SmC → ‘X’ → SmA → I transition sequence at 80 MPa. The optical texture and the POM-transmitted light intensity measured during a pressure cycle at 185°C showed a reversible change between the cubic and ‘X’ phases. The WAXD pattern of the ‘X’ phase showed a spot-like pattern, suggesting no layered structure for this phase, and also revealed a substantial decrease in the d-spacing of the low angle reflection at 80 and 100 MPa, compared with the d-spacings of the (0 0 1) reflection of the SmC phase and also the (2 1 1) reflection of the cubic phase. It is concluded from these data that the ‘X’ phase is a birefringent hexagonal columnar phase.     

Phase behaviour of the thermotropic cubic mesogen 1,2-bis-(4- n -octyloxybenzoyl)hydrazine under pressure

The phase transition behaviour of an optically isotropic, thermotropic cubic mesogen 1,2-bis-(4- n -octyloxybenzoyl)hydrazine, BABH(8), was investigated under pressures up to 200 MPa using a high pressure differential thermal analyser, wide-angle X-ray diffraction and a polarizing optical microscope equipped with a high pressure optical cell. The phase transition sequence, low temperature crystal (Cr 2 )-high temperature crystal (Cr 1 ) - cubic (Cub)-smectic C (SmC)-isotropic liquid (I) observed at atmospheric pressure, is seen in the low pressure region below about 30 MPa. The cubic phase disappears at high pressures above 30-40 MPa, in conjunction with the disappearance of the Cr 1 phase. The transition sequence changes to Cr 2 -SmC-I in the high pressure region. Since only the Cub-SmC transition line among all the phase boundaries has a negative slope (d T /d P ) in the temperature-pressure phase diagram, the temperature range for the cubic phase decreases rapidly with increasing pressure. As a result, a triple point was estimated approximately as 31.6 ±2.0 MPa, 147.0 ±1.0°C for the SmC, Cub and Cr 1 phases, indicating the upper limit of pressure for the observation of the cubic phase. Reversible changes in structure and optical texture between the Cub and SmC phases were observed from a spot-like X-ray pattern and dark field for the cubic phase to the Debye-Sherrer pattern and sand-like texture for the SmC phase both in isobaric and isothermal experiments.     

Phase behaviour of the thermotropic cubic mesogen 1,2-bis(4-n-decyloxybenzoyl)hydrazine under pressure

The phase transition behaviour of an optically isotropic, thermotropic cubic mesogen 1,2-bis(4-n-decyloxybenzoyl)hydrazine, BABH(10), was investigated under pressures up to 300 MPa using a high pressure differential thermal analyser, a wide angle X-ray diffractometer and a polarizing optical microscope (POM) equipped with a high pressure optical cell. The reversible change in structure and optical texture between the cubic (Cub) and smectic C (SmC) phases was associated with a change from a spot-like X-ray pattern and dark field for the Cub phase to the Debye-Sherrer ring pattern and sand-like texture for the SmC phase under both isobaric and isothermal conditions. The Cub phase was found to disappear at pressures above about 11 MPa. The phase transition sequence, low temperature crystal (Cr₃)-intermediate temperature crystal (Cr₂)-high temperature crystal (Cr₁)-Cub-SmC-isotropic liquid (I) observed at atmospheric pressure, is maintained in the low pressure region below 10 MPa. The transition sequence changes to Cr₃-Cr₂-(Cr₁)-SmC-I in the high pressure region. Since the Cub-SmC transition line determined by POM has a negative slope (dT/dP) in the T-P phase diagram, a triple point is estimated approximately at 10-11 MPa, and 143-145°C for the SmC, Cub and Cr₁ phases, giving the upper limit of pressure for the observation of the cubic phase.     

Phase behaviour of a thermotropic cubic mesogen of 1,2-bis(4′-n-hexyloxybenzoyl)hydrazine under pressure

The phase behaviour of the thermotropic cubic mesogen 1,2-bis(4′-n-hexyloxybenzoyl)hydrazine [BABH(6)] was investigated under pressure up to about 55 MPa using a polarising optical microscope equipped with a high-pressure optical cell. BABH(6) shows the crystal (Cr)–cubic (Cub)–isotropic liquid (I) phase transition at ambient pressure on heating. The smectic C (SmC) phase was induced above 32 MPa, showing the unusual phase sequence of Cr–Cub–SmC–I, similar to those in BABH(n) (n = 8–10). The boundary between the Cub and SmC phases exhibited a negative slope dT/dP of about –1.0 ºC MPa^?1.     

Phase behaviour of the thermotropic cubic mesogens 1,2-bis-(4-n-undecyl- and 4-n-dodecyl-oxybenzoyl)hydrazine under pressure

The phase transition behaviour of two optically isotropic, thermotropic cubic mesogens 1,2-bis-(4-n-undecyloxy- and 4-n-dodecyloxy-benzoyl)hydrazine, BABH(11) and BABH(12), was investigated under hydrostatic pressures up to 300 MPa using a high pressure differential thermal analyser, a wide angle X-ray diffractometer and a polarizing optical microscope equipped with a high pressure optical cell. It is found that for BABH(11) and BABH(12), a smectic C (SmC) phase is induced between the isotropic liquid (I) and the cubic (Cub) phases by applying pressures above 10-12 and 16-17 MPa, respectively. A sea-island texture consisting of bright sand-like sea regions (SmC phase) and areas of dark islands (Cub phase) appears in the mesophase under pressures up to 140 MPa, while the sand-like texture of the SmC phase is formed predominantly on cooling under pressure. These observations indicate the destabilization of the cubic phase with increasing pressure. The phase transition sequence of BABH(11) and BABH(12), Cr-Cub-I at atmospheric pressure, changes to Cr-Cub-SmC-I under intermediate pressures and would change to Cr-SmC-I under elevated pressure.     

Thermal behaviour of the thermotropic cubic mesogen 4'-n-hexadecyloxy-3'-nitrobiphenyl-4-carboxylic acid (ANBC-16) under hydrostatic pressure

The phase behaviour of 4'-n-hexadecyloxy-3'-nitrobiphenyl-4-carboxylic acid (ANBC-16) was investigated under hydrostatic pressures up to 200 MPa using high pressure differential thermal analysis. The phase transition sequence crystal 4 (Cr4)-crystal 3 (Cr3)-crystal 2 (Cr₂)-crystal 1 (Cr₁)-smectic C (SmC)-Cubic (Cub)-smectic A (SmA)-'structured liquid' (I₁)-isotropic liquid (I₂) was observed for a virgin sample on heating at atmospheric pressure. The stable temperature region of the optically isotropic cubic phase becomes narrower on increasing pressure and disappears at pressures above 65 MPa. The T vs. P phase diagram exhibits the existence of a triple point (65 MPa, 207.6°C) for the cubic phase, a new mesophase (X), and the SmA phase, indicating the upper limit for the cubic phase. The new mesophase, denoted here as X, appears in place of the cubic phase at pressures above 65 MPa. The phase diagram also indicates that the Cr₄-Cr₃, Cr₃-Cr₂, and Cr₂-Cr₁ transition lines merge at about 40-50 MPa and then only the Cr₄-Cr₁ transition is observed in the solid state at higher pressures. Thus the phase transition process on heating changes from the sequence Cr₄-Cr₃-Cr₂-Cr₁-SmC-Cub-SmA-I₁-I₂ at atmospheric pressure to Cr₄-Cr₁-SmC-X-SmA-I₁-I₂ in the high pressure region above 65 MPa, via Cr₄-Cr₃-Cr₂-Cr₁-SmC-(X)-Cub-SmA-I₁-I₂ in the low pressure region.     

Inversion of the phase sequence between the cubic and smectic C phases under pressure

The phase behaviour of a thermotropic cubic mesogen of 1,2-bis(4′-n-tetradecyloxybenzoyl)hydrazine BABH-14 was studied under hydrostatic pressure using a polarising optical microscope equipped with a high-pressure optical cell, and the P–T phase diagram was constructed. BABH-14 shows the Cr–Cub–I transition sequence under atmospheric and lower pressures, but the Cub phase is replaced completely by the high-pressure SmC, SmC(hp), phase under higher pressures. There is a narrow intermediate-pressure region between the low- and high-pressure regions, in which the Cr–SmC(hp)–Cub–I phase sequence is recognised. The SmC(hp)–Cub transition line has a positive slope with pressure and there are two triple points: one is for the Cr, Cub and SmC(hp) phases and the other is for the I, Cub and SmC(hp) phases. Comparing the phase sequence of BABH-14 with those for BABH-8 and -10, the pressure-induced inversion of the phase sequence between the cubic and SmC phases occurs in the BABH-n homologous compounds. Another new phenomenon is the formation of the monotropic cubic phase on cooling in the intermediate- and high-pressure regions, and an intriguing phenomenon of the cubic phase appearing twice, i.e. I–Cub–SmC(hp)– Cub–Cr phase transition, occurs in the intermediate-pressure region.     

Morphological phase behaviour under pressure of polycatenar mesogens with a perfluorinated moiety

Two polycatenar materials composed of a four‐aromatic‐ring core with a perfluorinated moiety attached in one terminal position through either butylene‐ or pentylene spacer groups, and three tetradecyloxy chains at the other end (abbreviated as 14PC₄F and 14PC₅F), were investigated to study the effect of pressure on the phase transition behaviour. A polarizing optical microscope equipped with a high pressure optical hot stage, was used for the purpose. The T vs. P phase diagrams of 14PC₄F and 14PC₅F were constructed in the pressure region up to 100 MPa. 14PC₄F showed the stable crystal (Cr₁)–columnar tetragonal (Col_tet)–smectic A (SmA)–columnar hexagonal (Col_h)–isoropic liquid (I) phase transition sequence under all pressures. 14PC₅F exhibited the phase sequence metastable crystal (Cr₂)–cubic (Cub)–Col_tet–SmA–I in a melt‐cooled sample on heating under pressure. But when the melt‐cooled Cr₂ sample was annealed at 52–54°C for 2–3 h, the stable crystal (Cr₁) was formed slowly, giving a stable Cr₁–Cub–Col_tet–SmA–I phase sequence. The temperature region of the stable cubic phase broadened with increasing pressure. Furthermore a new mesophase of 14PC₅F was pressure‐induced between the I and SmA phases on cooling at pressures above about 16 MPa. Since the monotropic mesophase exhibited a texture very similar to that of the high temperature Col_h phase of 14PC₄F with planar orientation, the new phase was assigned at a high temperature columnar hexagonal phase of 14PC₅F.     

Phase behavior of a thermotropic cubic mesogen 4'-n-hexadecyloxy-3'-nitro- biphenyl-4-carboxylic acid under pressure

The phase behavior of an optically isotropic cubic mesogen 4'-n-hexadecyloxy-3'-nitrobiphenyl-4-carboxylic acid (ANBC-16) was investigated under hydrostatic pressures up to 200 MPa using a high-pressure DTA, a polarizing optical microscope equipped with a high-pressure hot-stage and a wide-angle X-ray diffractometer equipped with a high-pressure vessel. In the T vs. P phase diagram constructed in the heating mode, a triple point exists at 54±1 MPa and 205±1°C for the SmC, cubic, and SmA phases. A new mesophase, denoted here as X, appears in place of the cubic phase under pressures above about 60 MPa, while the X phase appears on cooling in the whole pressure region studied. Thus the X phase is a monotropic (metastable) phase between the SmA and Cub phases in the low pressure region, while being an enantiotropic phase between the SmA and SmC phases in the high pressure range. The X phase exhibits broken-fan or sand-like textures under pressure and a spot-like diffraction pattern, indicating the birefringent feature and no layered structure. It is suggested that the X phase is tetragonal or hexagonal columnar phase. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal behaviour under pressure of the thermotropic cubic mesogen 4'- n -alkoxy-3'-nitrobiphenyl-4-carboxylic acids

The thermal behaviour of members of a homologous series which exhibits the optically isotropic cubic phase, the 4'- n -alkoxy-3'-nitrobiphenyl-4-carboxylic acids having alkoxy chains containing 16, 20 and 22 carbon atoms (referred to as ANBC-16, -20 and -22, respectively) was investigated under pressures up to 200-400 MPa by high pressure differential thermal analysis. In the phase diagram of ANBC-16 obtained on heating, a triple point was estimated at 54 ±1 MPa and 205 ±1°C for the SmC, Cub and SmA phases. It was found that the X phase is formed on cooling under all pressures, while appearing on heating at high pressures above about 54 MPa. Thus the X phase appears monotropically between the SmA and Cub phases in the low pressure region and enantiotropically between the SmA and SmC phases under higher pressures. It is strongly suggested that the X phase is a columnar mesophase. For ANBC-20 and -22, the cubic phase tends to be destabilized with increasing pressure. The temperature region of the cubic phase of ANBC-20 becomes narrower with increasing pressure and a triple point for the SmC, Cub and I phases is estimated to be at about 309 MPa. On the other hand, the cubic phase of ANBC-22 is still observed at the highest pressure examined.     

In situ observation of the pressure-induced mesophase for 4'-n-hexadecyloxy-3'-nitrobiphenyl-4-carboxylic acid

In situ observation of the optical texture, and X-ray patterns of the pressure-induced mesophase seen for 4'-n-hexadecyloxy-3'-nitrobiphenyl-4-carboxylic acid (ANBC-16) was performed under hydrostatic pressures up to 100MPa using a polarizing optical microscope equipped with a high pressure hot stage and a wide angle X-ray diffractometer equipped with a high pressure vessel respectively. It was found that the pressure-induced mesophase (hereafter refered to as 'X') appeared at pressures above 60 MPa, and exhibits a birefringent broken-fan or a sand-like texture that remain unaltered in the SmC phase. The POM-transmitted light intensity curve measured on heating clearly showed the Cr₄ →Cr₁ →SmC →'X' →SmA →I transition sequence at 80 MPa. The optical texture and the POM-transmitted light intensity measured during a pressure cycle at 185°C showed a reversible change between the cubic and 'X' phases. The WAXD pattern of the 'X' phase showed a spot-like pattern, suggesting no layered structure for this phase, and also revealed a substantial decrease in the d-spacing of the low angle reflection at 80 and 100 MPa, compared with the d-spacings of the (0 0 1) reflection of the SmC phase and also the (2 1 1) reflection of the cubic phase. It is concluded from these data that the 'X' phase is a birefringent hexagonal columnar phase.     

Phase behaviour of thermotropic banana-shaped compounds under pressure

The phase behaviour of two achiral bent core banana-shaped compounds, the hexyloxy (compound I) and decyloxy (compound II) members of the 1,3-phenylene bis[N-(2-hydroxy-4-n-alkoxybenzylidene)-4′-aminobenzoate] series was investigated under hydrostatic pressures up to 300?MPa using high pressure differential thermal analysis and light transmission methods. The reversible transition sequence crystal (Cr₁)–B₁ phase–isotropic liquid (I), observed at room pressure for compound I, remains in the pressure region up to c 70?MPa. At higher pressures a pressure-induced crystalline phase (Cr_i) appears between the Cr₁ and B₁ phases, its temperature region becoming wider with increasing pressure. The temperature vs. pressure phase diagram shows a triple point of 72.9?MPa and 160.3°C for the Cr₁, Cr_i and B₁ phases, indicating the lower limit of pressure for the Cr_i phase. In compound II the reversible transition sequence crystal (Cr₁)–B₂ phase–I is seen over the whole pressure region, and the temperature range of the B₂ phase remains unaltered. It is concluded that both the B₁ and B₂ banana phases are stable over the whole pressure region studied.     

Pressure-scanning DTA measurements of the cubic-smectic C phase transition of 1,2-bis-(4-n-octyloxy)- and 1,2-bis-(4-n-dodecyloxy benzoyl)hydrazines

The pressure-scanning differential thermal analyzer (DTA) measurements of the cubic (Cub)-smectic C (SmC) transition of thermotropic cubic mesogens of 1,2-bis-(4-n-octyloxybenzoyl)- and 1,2-bis-(4-n-dodecyloxybenzoyl)hydrazine, BABH(8) and BABH(12), were performed at isothermal condition using a high-pressure differential thermal analyzer. BABH(8) showed the same endothermic peak of the Cub-SmC transition in the pressurizing process as on heating at isobaric condition. On the other hand, BABH(12) showed only the cubic phase between the crystal and the isotropic liquid under pressures up to 16-17 MPa, but a high-pressure smectic C (SmC(hp)) phase was induced instead of the cubic phase under higher pressure. The Cub-SmC(hp) phase transition with a small exothermic peak occurred in the pressurizing process and the transition was observed reversibly. The Cub-SmC(hp) phase transition was in accordance with the morphological and structural observations mentioned before. The strange phenomenon of the inversion of sign of the Cub-SmC transition heat of BABH(n) homologues can be explained by the “Alkyl-chains as entropy reservoir” mechanism proposed by Saito et al.     

Electric field-induced cubic phase in 4'-n-docosyloxy-3'-nitrobiphenyl-4-carboxylic acid

We examine the influence of an alternating-current electric field on the lamellar smectic C (SmC) phase of 4'-n-docosyloxy-3'-nitrobiphenyl-4-carboxylic acid, and the formation of a field-induced cubic (Cub) phase with optical isotropy was observed for the first time. The induction was realized down to a temperature 10 K below the zero-field SmC to Cub phase transition temperature (TSmC-Cub). The formation of the induced Cub phase gave rise to a gradual increase of the shear storage modulus, and the modulus recovered quickly in response to the removal of the field, which is of interest as future applications to the stress transferring device.     

Thermal behaviour of the thermotropic cubic mesogen 4'-n-hexadecyloxy-3'-nitrobiphenyl-4-carboxylic acid (ANBC-16) under hydrostatic pressure

The phase behaviour of 4'-n-hexadecyloxy-3'-nitrobiphenyl-4-carboxylic acid (ANBC-16) was investigated under hydrostatic pressures up to 200 MPa using high pressure differential thermal analysis. The phase transition sequence crystal 4 (Cr4)-crystal 3 (Cr3)-crystal 2 (Cr₂)-crystal 1 (Cr₁)-smectic C (SmC)-Cubic (Cub)-smectic A (SmA)-'structured liquid' (I₁)-isotropic liquid (I₂) was observed for a virgin sample on heating at atmospheric pressure. The stable temperature region of the optically isotropic cubic phase becomes narrower on increasing pressure and disappears at pressures above 65 MPa. The T vs. P phase diagram exhibits the existence of a triple point (65 MPa, 207.6°C) for the cubic phase, a new mesophase (X), and the SmA phase, indicating the upper limit for the cubic phase. The new mesophase, denoted here as X, appears in place of the cubic phase at pressures above 65 MPa. The phase diagram also indicates that the Cr₄-Cr₃, Cr₃-Cr₂, and Cr₂-Cr₁ transition lines merge at about 40-50 MPa and then only the Cr₄-Cr₁ transition is observed in the solid state at higher pressures. Thus the phase transition process on heating changes from the sequence Cr₄-Cr₃-Cr₂-Cr₁-SmC-Cub-SmA-I₁-I₂ at atmospheric pressure to Cr₄-Cr₁-SmC-X-SmA-I₁-I₂ in the high pressure region above 65 MPa, via Cr₄-Cr₃-Cr₂-Cr₁-SmC-(X)-Cub-SmA-I₁-I₂ in the low pressure region.     

Phase behaviour of three homologues of the discotic hexa‐n‐alkoxyanthraquinones under pressure

The phase transition behaviour of three homologous discotic mesogens, the hexa‐n‐alkoxyanthraquinones HOAQ(n), n indicating the number of carbon atoms in the alkoxy group, was investigated under hydrostatic pressures up to 500?MPa using a high pressure differential thermal analyser. The T vs. P phase diagrams of HOAQ(6), HOAQ(8) and HOAQ(9) were constructed for solution‐ (Cr₀) and melt‐crystallized (Cr₁) samples of the compounds. HOAQ(6) shows the reversible Cr₀–rectangular columnar phase (Col_r)–hexagonal columnar phase (Col_h)–isotropic liquid (I) phase sequence at atmospheric pressure. The stable Col_r phase of HOAQ(6) has a decreased temperature range with increasing pressure and then the Col_r phase disappears under pressures above about 350?MPa; instead the Cr₀–Col_h–I phase sequence is exhibited. For HOAQ(8), the solution‐grown sample exhibits the stable Cr₀–Col_h–I phase sequence at atmospheric pressure. Applying pressure to the solution‐grown sample induces the formation of the stable Col_r phase in the pressure region between 10 and 350?MPa, leading to the Cr₀–Col_r–Col_h–I phase sequence. The pressure‐induced Col_r phase disappears under higher pressures. The melt‐cooled sample of HOAQ(8) shows the formation of the metastable crystal (Cr₁), unknown mesophase (X) and Col_r phases at lower temperatures under atmospheric pressure, and exhibits the reversible Cr₁–X–Col_r–Col_h–I phase sequence on subsequent thermal cycles. The metastable phase sequence was observed under pressures up to 100?MPa, but the phase transitions were too small to be detected under higher pressures. In HOAQ(9) the stable Cr₀–Col_h–I phase sequence is observed at all pressures, while the melt‐cooled sample shows the metastable Cr₁–Col_r–Col_h–I phase sequence under pressures up to 300?MPa. The metastable Col_r phase disappears under higher pressures.     

Morphological phase behaviour under pressure of polycatenar mesogens with a perfluorinated moiety

Two polycatenar materials composed of a four-aromatic-ring core with a perfluorinated moiety attached in one terminal position through either butylene- or pentylene spacer groups, and three tetradecyloxy chains at the other end (abbreviated as 14PC₄F and 14PC₅F), were investigated to study the effect of pressure on the phase transition behaviour. A polarizing optical microscope equipped with a high pressure optical hot stage, was used for the purpose. The T vs. P phase diagrams of 14PC₄F and 14PC₅F were constructed in the pressure region up to 100 MPa. 14PC₄F showed the stable crystal (Cr₁)-columnar tetragonal (Col_tet)-smectic A (SmA)-columnar hexagonal (Col_h)-isoropic liquid (I) phase transition sequence under all pressures. 14PC₅F exhibited the phase sequence metastable crystal (Cr₂)-cubic (Cub)-Col_tet-SmA-I in a melt-cooled sample on heating under pressure. But when the melt-cooled Cr₂ sample was annealed at 52-54°C for 2-3 h, the stable crystal (Cr₁) was formed slowly, giving a stable Cr₁-Cub-Col_tet-SmA-I phase sequence. The temperature region of the stable cubic phase broadened with increasing pressure. Furthermore a new mesophase of 14PC₅F was pressure-induced between the I and SmA phases on cooling at pressures above about 16 MPa. Since the monotropic mesophase exhibited a texture very similar to that of the high temperature Col_h phase of 14PC₄F with planar orientation, the new phase was assigned at a high temperature columnar hexagonal phase of 14PC₅F.     

Dielectric and electro-optical response of a room temperature tri-component antiferroelectric mixture

Frequency- and temperature-dependent dielectric and switching parameters of a room temperature tri-component antiferroelectric liquid crystal mixture W-287 have been determined. Dielectric, optical texture and thermodynamic studies show wide room temperature range antiferroelectric SmC*_a (?91.1°C to <–25°C) phase in addition to high temperature paraelectric SmA* (?2.6°C) and ferroelectric SmC* (?4.4°C) phases. The dielectric studies carried out in the frequency range of 1–35 MHz under planar anchoring condition of the molecules show five different relaxation modes appearing in the SmA*, SmC* and SmC*_a phases. Using Curie–Weiss law fit, ferroelectric SmC* to paraelectric SmA* transition temperature has been found to be 91.8°C. The dielectric response of SmC*_a phase exhibits unusually three relaxation modes due to collective as well as individual molecular processes in addition to phason mode in the SmC* phase and amplitudon mode in the SmA* phase. Spontaneous polarisation, switching time and rotational viscosity have also been determined. The maximum value of P_S is ?300 nC/cm², whereas viscosity is moderate. Switching time is of the order of few milli seconds.     

New side chain ferroelectric liquid crystalline polymers based on (2S, 3S)-2-chloro-3-methylpentanoic acid: synthesis and phase behaviour

The synthesis of four new chiral mesogenic monomers (M₁–M₄) and side chain ferroelectric liquid crystalline polymers containing (2S, 3S)-2-chloro-3-methylpentanoate is described. The chemical structures and phase behaviour of the monomers and polymers obtained in this study were characterised by Fourier transform infrared, proton nuclear magnetic resonance, polarising optical microscopy, differential scanning calorimetry, thermogravimetric analysis and X-ray diffraction. The selective reflection of light was investigated with ultraviolet/visible (UV/Vis). Their structure–mesomorphism relationships were discussed. M₁ and P₁ all showed a chiral smectic C (SmC*) phase. M₂ and M₃ revealed a SmC* phase and cholesteric phase, while their corresponding polymers P₂ and P₃ revealed a SmC* phase and smectic A (SmA) phase. M₄ only exhibited a cholesteric phase, whereas the corresponding polymers P₄ showed a SmA phase. Moreover, the selective reflection of light shifted to the long-wavelength region at the SmC* phase range and to the short-wavelength region at the cholesteric range with increasing temperature, respectively. The results seemed to demonstrate that the tendency towards melting temperature (T_m), glass transition temperature (T_g), isotropic temperature (T_i) and mesophase range for the monomers and polymers increased by increasing the mesogenic core rigidity or the number of phenyl ring. The polymerisation effect could lead to higher liquid crystalline to isotropic phase transition temperature, wider mesophase range and more ordered smectic phase formed. In addition, all the obtained polymers had a very good thermal stability and the corresponding T_d increased by increasing the number of phenyl ring.     

X-ray diffraction and dielectric spectroscopy studies on a partially fluorinated ferroelectric liquid crystal from the family of terphenyl esters

The fluorinated compound, (S)-4′′-(6-perfluoropentanoyoxyhexyl-1-oxy)-2′,3′-difluoro-4-(1-methylheptyloxycarbonyl)-[1,1′:4′,1′′]-terphenyl, which exhibits antiferroelectric SmC_A*, ferroelectric SmC* and paraelectric SmA* phases, has been investigated by polarising optical microscopy, differential scanning calorimetry, X-ray diffraction and frequency-dependent dielectric spectroscopy methods. X-ray studies have revealed that the layer thickness remains almost constant in the SmA* phase but within the SmC* and SmC_A* phases it decreases with decreasing temperature, a step jump being observed only at the SmA*–SmC* transition. The tilt angle in the SmC_A* phase decreases from 22.2° to 19.5°, and in the SmC* phase it decreases from 18.8° to 5.5°. Spontaneous polarisation is found to be quite high and varies between 74.1 and 118.7 nC cm^?2. The variation in ε′ and ε′′ with temperature shows a discontinuous change at the transition temperatures. Goldstone mode relaxation is only observed in the ferroelectric and antiferroelectric phases and is found to be of the Cole–Cole type. The soft mode is observed on application of a bias field near the SmC*–SmA* transition. Neither the soft mode nor the anti-phase azimuthal angle fluctuation mode is observed in SmC_A*. Rotational viscosity decreases quite rapidly with temperature but in a different manner in the ferroelectric and antiferroelectric phases. Activation energy for this process is found to be 48.14 kJ mol^?1 in the SmC* phase.