New side chain cholesterol-functionalised aliphatic polycarbonate copolymer: synthesis and phase behaviour

A new side cholesterol-functionalised liquid crystal (LC) copolymer based on aliphatic polycarbonate backbone was synthesised. The chemical structures of the block copolymers obtained in this study were characterised with Fourier Transform Infrared Spectroscopy (FT-IR) and Proton Nuclear Magnetic Resonance (¹H NMR) spectra. Their thermal stability and phase behaviours were investigated with thermogravimetric analysis (TGA) measurements, differential scanning calorimetry, and polarising optical microscopy. The molecular organisation in the mesophase was studied by temperature-dependent X-ray diffraction (XRD). As a result, the block copolymer bearing side cholesteryl groups showed a glass transition at 15.8°C and a smectic A (SmA) to isotropic phase transition at 151.3°C on heating cycle. XRD indicated that the block LC copolymer showed an interdigitated molecular arrangement of the mesogenic units within the smectic layers. This partial bilayer structure was similar to the SmA phase formed by polar mesogens.     

On the liquid-crystalline properties of methacrylic polymers containing 4′-(4-alkyloxyphenyl)azobenzene mesogens

In this article, we report on the synthesis and thermotropic behaviour of methacrylic polymers containing 4′-(4-alkyloxyphenyl)azobenzene mesogens attached to the backbone through n-alkyloxy spacers of 6 or 10 methylene groups. Polymerisations were carried out via free radicals using azobisisobutyronitrile (AIBN) as initiator. Chemical structures of polymers and their precursors were characterised by ¹H NMR spectroscopy. Thermogravimetric analysis showed that azopolymers are thermally stable up to temperatures around 300°C. The thermotropic liquid-crystalline (LC) behaviour was studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and X-ray diffraction (XRD). Results indicate that all synthesised mesogens, monomers and polymers developed two or more orthogonal LC phases in wide temperature ranges. Mesogens and monomers developed nematic and smectic phases, whereas polymers exhibited only smectic phase. In polymers, the arrangement of mesogens depends on the relative length of the spacer and the terminal flexible chain; two distinct structural models were proposed based on chemical interactions and steric constrains. The trans–cis photoisomerisation of monomers and polymers in solution was also studied. High cis-isomer contents (>80%) were reached in relative short irradiation times despite the steric constrains imposed by the polymer backbone.     

Synthesis and mesomorphism of new aliphatic polycarbonates containing side cholesteryl groups

New cholesterol side-functionalised polycarbonate polymers were synthesised by the ring-opening homo- and copolymerisation reaction of the cyclic monomer cholesteryl 5-methyl-2-oxo-1,3-dioxane-5-carboxylate and d,l-lactide using Sn(Oct)₂ as a catalyst. The chemical structures and average molecular weights of the cyclic monomer, homopolymer and block copolymers obtained in this study were characterised using FT-IR, ¹H NMR and gel permeation chromatographic measurement. The mesomorphism and mesophase structure were investigated with polarising optical microscopy, differential scanning calorimetry and X-ray diffraction measurement. As a result, the homopolymer and block copolymers showed an enantiotropic smectic A (SmA) phase. With the concentration of the lactide segment increasing, the glass transition temperature and isotropic temperature of the corresponding block copolymer all decreased. In addition, XRD suggested that the homopolymer and two block copolymers showed the SmA double-layer packing of side chains.     

Synthesis,characterisation, mesomorphic investigation and temperature-dependent Raman study of a novel calamitic liquid crystal: methyl 4-(4′-n-alkoxybenzylideneamino)benzoate

A new series of Schiff base calamitic liquid crystal; methyl 4-(4′-n-alkoxybenzylideneamino)benzoate (MABAB), H_2n+1C _n OC₆H₄C(H)=NC₆H₄COOCH₃ (n = 6, 8, 10, 12, 14, 16) has been synthesised and characterised by elemental analyses, Fourier transform infrared spectroscopy (FT-IR), ¹H and ¹³C Nuclear Magnetic Resonance (NMR) spectroscopy. The mesomorphic properties of these compounds were studied by differential scanning calorimetry (DSC) and polarising optical microscopy (POM). All members of the series exhibit enantiotropic smectic A (SmA) mesophase. Temperature-dependent micro-Raman study of one of the members, MABAB-10 has been employed to identify phase transitions and the molecular rearrangement therein. Analysis of Raman marker bands; C–H in-plane bending, C–C stretching of phenyl rings and –C(H)=N– linking group of core confirms the transitions clearly as observed through DSC and POM. An in situ Raman measurement of C–H in-plane bending mode has also been performed to visualise the molecular changes more clearly. The Raman study gives an evidence of induced co-planarity of rings at Cr→SmA phase transition. The density functional theoretical (DFT) optimisation of monomer, dimer and rotational conformer of MABAB-10 also support the induced co-planarity at Cr→SmA phase transition.     

Synthesis,characterisation and liquid crystalline properties of some Schiff base and cinnamate central linkages involving 1,3,5-trisubstituted pyrazolone ring system and their Cu(II) complexes

Two new mesogenic homologous series, each containing 1,3,5-trisubstituted pyrazolone derivatives, 4-n-alkoxyphenyl and Schiff base–cinnamate central linkages, have been synthesised to give 4-[(5-hydroxy-3-methyl-1-phenyl-4,5-dihydro-1H-pyrazol-4-yl) methyleneamino] phenyl 3-(4-n-alkoxyphenyl)acrylate [Series-A] and 4-[(5-hydroxy-3-methyl-1-p-tolyl-4,5-dihydro-1H-pyrazol-4-yl)methyleneamino] phenyl 3-(4-n-alkoxyphenyl)acrylate [Series-B] and their Cu(II) complexes have also been synthesised. These compounds were characterised by elemental analysis, Fourier transform infrared (FT-IR), proton nuclear magnetic resonance (¹H NMR), carbon-13 NMR (¹³C NMR) and ultraviolet (UV)-visible and mass spectral studies. Their mesomorphic behaviour was studied by polarising optical microscope (POM) with a heating stage. POM data were compared with differential scanning calorimetry thermograms. In Series-A and -B, all compounds exhibit mesomorphism. Series-A compounds exhibit an enantiotropic nematic mesophase except propyl derivative, while a smectic A (SmA) mesophase is observed from the heptyl derivative and persists up to the last member of the homologous series. n-Heptyloxy derivative is monotropic for SmA phase. Series-B compounds also exhibit the enantiotropic nematic mesophase, while the SmA mesophase is observed from the heptyl derivative and persists up to the last member of the homologous series. n-Dodecyloxy derivative exhibits monotropic SmA and nematic mesophases. The mesomorphic properties of both series are compared with each other and the other structurally related compounds. The study reveals that cinnamate linkage containing liquid crystals have higher thermal stability compared to structurally related series containing chalcone linkage. In case of complex series, only one compound from each series gives nematic mesophase.     

Mesomorphous structure change by tail chain number in ionic liquid crystalline complexes of linear polymer and amphiphiles

Three polymer-amphiphile complexes were prepared by combining poly(allylamine hydrochloride)(PAH) with the potassium salt of mono-,di-,and trisubstituted benzoic acid dendrons(4-octyloxybenzoic acid,3,5-dioctyloxybenzoic acid,and 3,4,5- trioctyloxybenzoic acid).The solid structure and properties were monitored with FT-IR,XRD,TG,DSC,and polarized optical microscope(POM).Difference in the tail chain number of the dendritic amphiphile induced two different mesomorphous structures: lamella for the mono-,disubstituted dendron containing complexes and hexagonal column for the trisubstituted dendron containing complexes.These corresponded to the ionic thermotropic liquid crystal SmA andΦ_h phases,respectively.This finding is significant for design of functional nanostructures based on the ionic complexation of polymers and amphiphiles.     

Mesomorphic and fluorescence properties of methyl 4-(4-alkoxystyryl)benzoates

A series of methyl 4-(4-alkoxystyryl)benzoates was synthesised and studied for liquid crystalline and fluorescence properties. The peculiarity of the reaction scheme involved condensation between 4-alkoxybenzaldehyde and 4-(methoxycarbonyl)benzyltriphenyl phosphonium bromide in dichloromethane without any phase separation. The compounds were found thermally stable up to 200°C. The banded or arced focal-conic fan texture of CrE phase was exhibited on cooling the compounds (with chain length > C₄) below the SmA phase. It was observed that increasing chain length up to C₁₀ enhances mesophase stability. No LC behaviour was manifested by small (up to C₃) and branched small chain (up to C₄) members of the series.     

Studies on the odd‐even effect of methylene spacers in poly(pyromellitimide‐ester)s

Three series of poly(pyromellitimide‐ester)s were synthesized from various N,N′‐bis(ω‐hydroxyalkyl)pyromellitimides (HAPMIs) by melt condensation with dicarboxylic acids, including terephthalic acid (TPA), 4,4′‐biphenyldicarboxylic acid (BPDA), and 4,4′‐azobenzenedicarboxylic acid (ABDA). Polymers were characterized by elemental analysis, solubility, inherent viscosity, spectra (IR, ¹H‐NMR, ¹³C‐NMR), and X‐ray diffraction (XRD). Thermal stability and phase transition behaviour were evaluated by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and hot‐stage optical polarized microscopy (HOPM). The d‐spacings, calculated from XRD data, showed an odd‐even effect with varying numbers of methylene spacers. Crystallinity of polymers decreased in the following order: azobenzene > biphenyl > phenyl polymers. Similarly, DSC‐obtained melting temperatures (T_m's) showed an odd‐even effect, and glass transition temperatures (T_g's) decreased with increasing numbers of methylene spacers. Thermal stability decreased as methylene chain length increased. Thermal stability of polymers occurred in the following order: phenyl > biphenyl > azobenzene polymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1755–1761, 1999     

Synthesis and characterisation of polymethacrylates containing para-, meta- and ortho-monosubstituted azobenzene moieties in the side chain

Three sets of novel side-chain liquid crystalline polymers with monosubstituted azobenzene moieties in the side-chain have been studied. These are poly(p-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (PPHABM), poly(m-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (PMHABM) and poly(o-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (POHABM). The chemical structure of the monomers was confirmed by ¹H NMR, ¹³C NMR spectroscopy and elemental analysis. The structural characterisation of the polymers was performed by ¹H NMR spectroscopy and gel permeation chromatography, and their phase behaviour and liquid crystalline properties were studied using differential scanning calorimetry, polarised optical microscopy and wide-angle X-ray diffraction. The results show that the transitional behaviour of side-chain liquid crystalline polymers containing monosubstituted azobenzene moieties depends strongly on the position of the substituent on the azobenzene moiety; for example, the ortho-monosubstituted polymers do not form liquid crystalline phases, but all the para- and meta-monosubstituted polymers exhibit a smectic A phase. Furthermore, the glass transition temperature (T_g ) of the polymers decreases in the order, para > meta > ortho. For the PPHABM and PMHABM polymers the isotropic temperature (T_i ) and liquid crystalline range (ΔT, from T_g to T_i ) are found to be in the order, para > meta, although it is surprising that the associated enthalpy changes in these polymers is the opposite order, meta > para.     

Synthesis and characterization of novel ferroelectric liquid crystal polysiloxane containing undecanoyloxy spacer (I)

A novel side-chain liquid crystal polysiloxane and its corresponding monomer were synthesized by the standard method. We ensured their structures were as expected and their purities were high by ¹H nuclear magnetic resonance and infrared measurements. They were studied by differential scanning calorimetry (DSC) for their thermal analysis and polarizing optical microscopy (POM) with hot stage for their textures and transition temperatures. The results showed good liquid crystal properties and low transition temperatures of the mesophase. X-ray diffractions were done to research their layer structure and SmA and SmC^* phases were assured, in good agreement with the results of the POM and DSC measurements. The optical rotation degree was also measured.     

双链两性表面活性剂(C16)2NCnS的热致液晶

合成了具有两根十六烷烃链, 两个离子头基(季铵盐和磺酸盐)中变化不同长度联接链的新型磺基甜菜碱两性表面活性剂(C16H33)2NCH3(CH2)nSO3(记为(C16)2NCnS, n=2, 3, 4, 6). 采用TGA、DSC、XRD和POM等技术考察了它们的热行为. 研究表明, 热分解温度随着联接链增长而降低; 固相在加热过程出现了多种晶型转变, 但只有(C16)2NC4S和(C16)2NC6S形成了液晶, 前者为近晶A液晶, 后者为六方柱状液晶. 这些液晶在升温和降温过程中都被观察到, 表明其热稳定性良好.     

New side chain ferroelectric liquid crystalline polymers based on (2S, 3S)-2-chloro-3-methylpentanoic acid: synthesis and phase behaviour

The synthesis of four new chiral mesogenic monomers (M₁–M₄) and side chain ferroelectric liquid crystalline polymers containing (2S, 3S)-2-chloro-3-methylpentanoate is described. The chemical structures and phase behaviour of the monomers and polymers obtained in this study were characterised by Fourier transform infrared, proton nuclear magnetic resonance, polarising optical microscopy, differential scanning calorimetry, thermogravimetric analysis and X-ray diffraction. The selective reflection of light was investigated with ultraviolet/visible (UV/Vis). Their structure–mesomorphism relationships were discussed. M₁ and P₁ all showed a chiral smectic C (SmC*) phase. M₂ and M₃ revealed a SmC* phase and cholesteric phase, while their corresponding polymers P₂ and P₃ revealed a SmC* phase and smectic A (SmA) phase. M₄ only exhibited a cholesteric phase, whereas the corresponding polymers P₄ showed a SmA phase. Moreover, the selective reflection of light shifted to the long-wavelength region at the SmC* phase range and to the short-wavelength region at the cholesteric range with increasing temperature, respectively. The results seemed to demonstrate that the tendency towards melting temperature (T_m), glass transition temperature (T_g), isotropic temperature (T_i) and mesophase range for the monomers and polymers increased by increasing the mesogenic core rigidity or the number of phenyl ring. The polymerisation effect could lead to higher liquid crystalline to isotropic phase transition temperature, wider mesophase range and more ordered smectic phase formed. In addition, all the obtained polymers had a very good thermal stability and the corresponding T_d increased by increasing the number of phenyl ring.     

Synthesis,structure, and properties of chiral liquid crystal monomers and polymers based on menthol

To study structure–mesomorphism relationships of the monomers and polymers based on menthol, four new chiral monomers ( M₁ – M₄ ) and the corresponding homopolymers ( P₁ – P₄ ) with menthyl group were synthesized. Their chemical structures, formula, phase behavior, and thermal stability were characterized by FTIR, ¹H NMR, ¹³C NMR, elemental analyses, differential scanning calorimetry, polarizing optical microscopy, X‐ray diffraction, and thermogravimetric analysis. The selective reflection of light was investigated with ultraviolet/visible spectrometer. The influence of the mesogenic core rigidity, spacer length, and menthyl steric effect on the mesomorphism of M₁ – M₄ and P₁ – P₄ was examined. By inserting a flexible spacer between the mesogenic core and the terminal menthyl groups, four target monomers and polymers could form the expected mesophase. Moreover, their melting temperature (T_m), glass transition temperature (T_g), clearing temperature (T_i), and mesophase range (ΔT) increased with increasing the mesogenic core rigidity; whereas the T_m and T_g decreased, T_i and ΔT increased with an increase of the spacer length. M₁ and M₂ showed monotropic and enantiotropic cholesteric phase, respectively, whereas M₃ and M₄ all revealed chiral smectic C (SmC*), cholesteric and cubic blue phases. In addition, with increasing temperature, the selective reflection of light shifted to the long wavelength region at the SmC* phase range and to the short wavelength region at the cholesteric range, respectively. P₁ and P₂ only showed a smectic A (SmA) phase, whereas P₃ and P₄ exhibited the SmC* and SmA phases. All the obtained polymers had very good thermal stability. © 2012 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym Chem, 2012     

Effect of chiral isosorbide groups on mesomorphic properties of side-chain liquid-crystalline polysiloxanes

Chiral side-chain liquid-crystalline (LC) polysiloxanes containing isosorbide groups were graft copolymerised with poly(methylhydrogeno)siloxane, a chiral LC monomer 6-(4-methoxy-benzoyloxy)-hexahydro-furo[3,2-b]furan-3-yl 4'-(4-undec-10-enoyloxy-benzoyloxy)-biphenyl-4-yl adipate and a nematic LC monomer 4'-(4-methoxy-benzoyloxy)-biphenyl-4-yl 4-(2-undec-10-enoyloxy-ethoxy)-benzoate. The chemical structures and LC properties of the monomers and polymers were characterised by use of various experimental techniques including Fourier transform infrared spectroscopy (FTIR), ¹H-nuclear magnetic resonance (NMR), element analyses (EA), differential scanning calorimetry (DSC), polarised optical microscopy (POM) and X-ray diffraction (XRD). All the chiral LC polymers showed LC properties with very wide mesophase temperature ranges and the chiral component in the LC polymer systems lead to the appearance of a cholesteric phase. The polymers bearing most chiral LC monomer component showed smectic phases by reason of regular structures in the polymer systems. With the increase of another nematic LC monomer in the polymers, the regular polymer structures were destroyed because of different chemical structures between the two kinds of LC monomers, leading to the disappearance of the smectic arrangement.     

Thermal and Emission Properties of a Series of Lanthanides Complexes with N-Biphenyl-Alkylated-4-Pyridone Ligands: Crystal Structure of a Terbium Complex with N-Benzyl-4-Pyridone

This work focuses on the investigation of the liquid crystalline behavior and luminescence properties of the lanthanide complexes of Eu(III), Sm(III) and Tb(III) with N-biphenyl-alkylated-4-pyridone ligands. The organic ligands having a biphenyl group attached via a long flexible spacer with either 9 or 10 carbon atoms were synthesized by the reaction between 4-hydroxypyridine and the corresponding bromide compounds. The chemical structures of the organic and lanthanide complexes were assigned based on elemental analysis, single-crystal X-ray diffraction, ¹H, ¹³C NMR and IR spectroscopies, and thermogravimetric analysis (TGA). The X-ray diffraction analysis of a parent compound shows that the lanthanide ions are surrounded by three monodentate pyridone ligands and three bidentate nitrate ions, giving a 9-coordinate environment. The mesogenic behavior and the type of liquid crystalline phases exhibited by the new complexes were analyzed by differential scanning calorimetry (DSC) and polarizing optical microscopy (POM), and powder X-ray diffraction (XRD) studies. Only the lanthanide complexes with longer spacer (10) display a monotropic SmA phase, typically on a short thermal range (less than 10 °C). The complexes with shorter flexible chains (9) show no liquid crystalline properties with melting temperatures lower than their analogs with longer spacers. The emission spectra recorded in solid state at room temperatures show typical emission bands for each lanthanide ion employed (Eu(III), Tb(III) and Sm(III)).     

Optically-active comb-branch liquid crystalline polymers having the chiral center in the flexible spacer unit. III. Copolymers of (S)-2-(4′-cyano-4-biphenylyloxy)-1-methylethoxy ethyl methacrylate and di[6-(4-methoxy-4′-oxybiphenyl) hexyl]-2-methylene butane-1,4-dioate

A new series of copolymers with optically-active liquid crystalline side chain units has been synthesized from the comonomers (S)-2-[2-(4′-cyano-4-biphenylyloxy-1-methylethoxy]ethyl methacrylate ( 1 ) and di[6-(4-methoxy-4′-oxybiphenyl)hexyl]-2-methylene butane-1,4-dioate ( 4 ). Chiral nematic phases were exhibited by two members of the series, rich in monomer 1 , while a smectic phase was exhibited in copolymers rich in 4 . While it was thought possible that ordered chiral liquid crystalline phases may be induced by copolymerizing chiral mesogenic monomers with mesogenic derivatives of itaconic acid where the high side chain density encourages greater ordering in the system, no evidence of smectic C^* phases could be found in the present systems. © 1993 John Wiley & Sons, Inc.     

Phase and optical behaviours of chiral-azo liquid crystal polymethylsiloxanes with isosorbide units

ABSTRACT

In this study, we synthesised two series of cholesteric liquid crystal polymers CPQ and CPZ series. First, we prepared four different monomers ML₁ containing a cholesteryl group, ML₂ containing a cyano group, ML₃ containing a phenolic hydroxyl group and ML₄ containing isosorbide with azo groups. With the polymethylsiloxanes as the main chain, CPQ series were then synthesised by copolymerisation among the monomers ML₁, ML₂ and ML₃ and CPZ series were synthesised by esterification between the CPQ series and the monomer ML₄. ¹HNMR and FT-IR spectra confirmed the chemical structures of all the monomers and polymers. The mesomorphic behaviours and thermal properties were investigated by TGA, DSC, POM and XRD. Both the CPQ and CPZ series exhibited excellent thermal stability and reversible phase transitions, as well as interesting Grandjean textures under POM. CPZ series showed higher optical activity than CPQ series due to the introduction of the isosorbide group and the azo group, which could tune the pitch to make Bragg selective reflection appear more easily. UV–Vis spectra investigated the photoresponse behaviours of CPZ series thoroughly.     

Synthesis and characterization of side‐chain liquid crystalline ABC triblock copolymers with p‐methoxyazobenzene moieties by atom transfer radical polymerization

A series of novel side‐chain liquid crystalline ABC triblock copolymers composed of poly(ethylene oxide) (PEO), polystyrene (PS), and poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PMMAZO) were synthesized by atom transfer radical polymerization (ATRP) using CuBr/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as a catalyst system. First, the bromine‐terminated diblock copolymer poly(ethylene oxide)‐block‐polystyrene (PEO‐PS‐Br) was prepared by the ATRP of styrene initiated with the macro‐initiator PEO‐Br, which was obtained from the esterification of PEO and 2‐bromo‐2‐methylpropionyl bromide. An azobenzene‐containing block of PMMAZO with different molecular weights was then introduced into the diblock copolymer by a second ATRP to synthesize the novel side‐chain liquid crystalline ABC triblock copolymer poly(ethylene oxide)‐block‐polystyrene‐block‐poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PEO‐PS‐PMMAZO). These block copolymers were characterized using proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatograph (GPC). Their thermotropic phase behaviors were investigated using differential scanning calorimetry (DSC) and polarized optical microscope (POM). These triblock copolymers exhibited a smectic phase and a nematic phase over a relatively wide temperature range. At the same time, the photoresponsive properties of these triblock copolymers in chloroform solution were preliminarily studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4442–4450, 2008     

Synthesis and Characterization of New Block Copolymers with Poly(ethylene oxide) and Poly[3(S)‐sec‐butylmorpholine‐2,5‐dione] Sequences

Four different types of polydepsipeptide‐polyether block copolymers were synthesized via ring‐opening polymerization of 3(S)‐sec‐butylmorpholine‐2,5‐dione (BMD) in the presence of hydroxytelechelic poly(ethylene oxide) (PEO) with stannous octoate as a catalyst.The polymers were an AB block copolymer, an ABA block copolymer, an (A)₂B star shaped copolymer and an (A)₂B(A)₂ copolymer, where A is a poly[3(S)‐sec‐butylmorpholine‐2,5‐dione] (PBMD) and B a poly(ethylene oxide) block. The molar ratio of BMD to PEO was varied to obtain copolymers with different weight fractions of PBMD blocks ranging from 59.8 to 96.7 wt.‐%. The crystallinity of the PEO phase in the copolymers decreases in the following order: AB > (A)₂B > ABA > (A)₂B(A)₂ . The static contact angle θ decreases with increasing PEO content in the block copolymers.     

From Mesomorphic Phosphine Oxide to Clustomesogens Containing Molybdenum and Tungsten Octahedral Cluster Cores

New clustomesogens (i.e., metal atom clusters containing liquid crystalline (LC) materials) have been obtained by grafting neutral cyanobiphenyl (CB)‐ or cholesteryl‐containing tailor‐made dendritic mesomorphic triphenylphosphine oxide ligands on luminescent (M₆Clⁱ₈)⁴⁺ octahedral cluster cores (M=Mo, W). The LC properties were studied by a combination of polarizing optical microscopy (POM), differential scanning calorimetry (DSC), and X‐ray powder diffraction analyses. While the organic ligands showed various mesophase types ranging from nematic, SmA columnar (SmA_Col), SmA, and SmC phases, it turned out that the corresponding clustomesogens formed layered phases (SmA) over a wide range of temperatures that depend on the nature and density of mesogenic groups employed. Intrinsic luminescence properties of the cluster precursors are preserved over the entire range of LC phase existence.