Alignment of liquid crystal and dichroic dye molecules in mixed Langmuir and Langmuir-Blodgett films

A study of dichroic dye-liquid crystal mixtures (guest-host systems) in monolayers formed at a gas-liquid interface (Langmuir films) and at a solid surface (Langmuir-Blodgett films) has been made. As a host 4- n -octyl-4'-cyanobiphenyl (8CB) or 4- n -pentyl-4"-cyano- p -terphenyl (5CT) were chosen, while three dichroic azo dyes with various molecular structures were used as guest species. The dyes were added to the liquid crystal matrices at a concentration corresponding to the whole range of molar fractions and the surface pressure-mean molecular area isotherms for Langmuir films were recorded. On the basis of the isotherms, conclusions about the molecular organization and the miscibility of the components in the ultrathin films were drawn. The Langmuir films were transferred onto the quartz plates at surface pressures below the collapse point. The polarized absorption spectra of the Langmuir-Blodgett films were recorded and information about the alignment and intermolecular interactions in the mixtures of the non-amphiphilic dichroic dyes and the liquid crystals with strongly polar terminal groups were obtained.     

Molecular organization in binary mixtures of derivatives of naphthalenebicarboxylic acid and naphthoylenebenzimidazole with a liquid crystal in two-dimensional layers

Langmuir films of some dichroic dyes, namely derivatives of naphthalenebicarboxylic acid and derivatives of naphthoylenebenzimidazole, as well as of their mixtures with the liquid crystals 4-octyl-4′-cyanobiphenyl (8CB) and 4-pentyl-4″-cyano-p-terphenyl (5CT) were prepared. Surface pressure/mean molecular area isotherms were recorded from which some information about the alignment of molecules in a monomolecular layer at an air–water interface could be deduced. It was found that the properties of the monolayer are highly sensitive to the molecular structure of the side groups substituted on the main skeleton of the dye molecule, and to the mixture composition. Moreover, information about the miscibility or the phase separation of the two components in Langmuir films formed from dye/liquid crystal mixtures was obtained by using the excess area criterion and surface pressure rules.     

Molecular organization in binary mixtures of derivatives of naphthalenebicarboxylic acid and naphthoylenebenzimidazole with a liquid crystal in two-dimensional layers

Langmuir films of some dichroic dyes, namely derivatives of naphthalenebicarboxylic acid and derivatives of naphthoylenebenzimidazole, as well as of their mixtures with the liquid crystals 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4'-cyano-p-terphenyl (5CT) were prepared. Surface pressure/mean molecular area isotherms were recorded from which some information about the alignment of molecules in a monomolecular layer at an air-water interface could be deduced. It was found that the properties of the monolayer are highly sensitive to the molecular structure of the side groups substituted on the main skeleton of the dye molecule, and to the mixture composition. Moreover, information about the miscibility or the phase separation of the two components in Langmuir films formed from dye/liquid crystal mixtures was obtained by using the excess area criterion and surface pressure rules.     

Spectroscopic studies of Langmuir-Blodgett films of 3,4,9,10-tetra(heptyloxycarbonyl)perylene and its mixtures with a liquid crystal

Langmuir (L) and Langmuir-Blodgett (LB) films of 3,4,9,10-tetra(heptyloxycarbonyl)perylene and its binary mixtures with 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4'-cyano-p-terphenyl (5CT) have been studied. On the basis of the surface pressure-mean molecular area isotherms of L films, the alignment of the molecules on the air-water interface has been estimated. The L films were transferred onto quartz plates at surface pressures below the collapse point. The absorption and fluorescence spectra of LB films, obtained using unpolarized and linearly polarized light, were recorded. The results obtained have led to conclusions on the arrangement of the dye and liquid crystal molecules on the air-solid substrate interface. The fluorescence spectra revealed the formation of excited dimers in LB films.     

Molecular organization in two-dimensional films of liquid I. Langmuir films of binary mixtures of liquid crystals with a crystalline mixtures terminal cyano group

The Langmuir films of two liquid crystal materials, 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4"-cyano-p-terphenyl (5CT), and of their mixtures have been studied by recording surface pressure-area isotherms and Brewster angle microscopy (BAM) images. The pure liquid crystals revealed very different characters of the surface pressure-area isotherms indicating different organization of the molecules and different molecular interactions in the monolayer at the water-air interface. The surface pressure-area isotherms of Langmuir films formed from 8CB/5CT mixtures give evidence for phase separation of the components over the whole range of molar fractions. Similar conclusions have been drawn on the basis of BAM image analysis.     

Molecular organization in two-dimensional films of liquid crystalline mixtures III. Langmuir films of binary mixtures of liquid crystal materials with terminal CN o r NCS group

Langmuir films of binary mixtures of the following liquid crystal materials: 4-octyl-4′-cyanobiphenyl (8CB) or 4-pentyl-4″-cyano-p-terphenyl (5CT) with 4-(trans-4'-octylcyclohexyl)isothiocyanatobenzene (8CHBT), trans-4-octyl(4′-cyanophenyl)cyclohexane (8PCH) or 4-octyl4′-isothiocyanatobiphenyl (8BT) were investigated. Surface pressure-mean molecular area isotherms were recorded at various mixture compositions. It was found that only liquid crystal materials for which the molecules have a terminal -CN group are able to form a stable monolayer at the air-water interface. Moreover, information about the miscibility or the phase separation of the two components in the mixures was obtained by using the excess area criterion and surface phase rules.     

Molecular organization in two-dimensional films of liquid II. Langmuir and Langmuir-Blodgett films of a perylene-like dye mixed with liquid crystals having a terminal cyano group crystalline mixtures

Langmuir and Langmuir-Blodgett (LB) films of a perylene-like compound and its binary mixtures with 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4"-cyano-p-terphenyl (5CT) have been studied. On the basis of the surface pressure-area isotherms, the molecular organization on the air-water interface has been estimated. Information about the miscibility or the phase separation of components in the binary mixtures has been obtained. The spectroscopic study of the LB films has allowed conclusions to be drawn about the arrangement of the molecules on the quartz slides. The fluorescence spectra of the LB films of the perylene-like compound have revealed the formation of self-aggregates.     

Molecular organization in binary mixtures of derivatives of naphthalenebicarboxylic acid and naphthoylenebenzimidazole with a liquid crystal in two-dimensional layers II. Langmuir-Blodgett films

Langmuir-Blodgett (LB) films of some dichroic dyes, namely derivatives of naphthalenebicarboxylic acid and derivatives of naphthoylenebenzimidazole, and of their mixtures with mesogens: 4-octyl-4'-cyanobiphenyl or 4-pentyl-4'-cyano-p-terphenyl were prepared. Absorption and fluorescence studies using unpolarized and linearly polarized light were carried out. Both absorption and fluorescence spectra indicated the formation of aggregates of dye molecules in monomolecular layers. Moreover, it was found that dye molecules are more tilted to the quartz surface in LB films than to the plane of the air-water interface in Langmuir films.     

Molecular organization in two-dimensional films of liquid I. Langmuir films of binary mixtures of liquid crystals with a crystalline mixtures terminal cyano group

The Langmuir films of two liquid crystal materials, 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4"-cyano-p-terphenyl (5CT), and of their mixtures have been studied by recording surface pressure-area isotherms and Brewster angle microscopy (BAM) images. The pure liquid crystals revealed very different characters of the surface pressure-area isotherms indicating different organization of the molecules and different molecular interactions in the monolayer at the water-air interface. The surface pressure-area isotherms of Langmuir films formed from 8CB/5CT mixtures give evidence for phase separation of the components over the whole range of molar fractions. Similar conclusions have been drawn on the basis of BAM image analysis.     

Molecular organization in two-dimensional films of liquid crystalline mixtures III. Langmuir films of binary mixtures of liquid crystal materials with terminal CN o r NCS group

Langmuir films of binary mixtures of the following liquid crystal materials: 4-octyl-4'-cyano'biphenyl (8CB) or 4-pentyl-4"-cyano-p-terphenyl (5CT) with 4-(trans-4'-octylcyclohexyl)isothiocyanatobenzene (8CHBT), trans-4-octyl(4'-cyanophenyl)cyclohexane (8PCH) or 4-octyl4'-isothiocyanatobiphenyl (8BT) were investigated. Surface pressure-mean molecular area isotherms were recorded at various mixture compositions. It was found that only liquid crystal materials for which the molecules have a terminal -CN group are able to form a stable monolayer at the air-water interface. Moreover, information about the miscibility or the phase separation of the two components in the mixures was obtained by using the excess area criterion and surface phase rules.     

Influence of the alkyl chain length of some mesogenic molecules on their Langmuir film formation ability

Langmuir films of members of two homologous series, the 4‐n‐alkyl‐4′‐cyanobiphenyls (nCB) for n = 2–14 and trans‐4‐n‐alkyl(4′‐cyanophenyl)cyclohexanes (PCHn) for n = 2–12, have been studied by recording surface pressure/area isotherms and by Brewster angle microscopy. It has been found that the compounds with very short chains (n3) and very long chains (n>12 for nCB, n>10 for PCHn) are unable to form compressible monolayers at the air–water interface. Other members of both series can form stable Langmuir films, but both their rigidity and stability as well as the molecular packing vary with the alkyl chain length. The isotherms and BAM images imply that the organization of the liquid crystal molecules in the films is to some extent correlated with their ability to form corresponding mesophase in the bulk: nematogenic compounds tend to form rounded droplet‐like domains, whereas smectogenic compounds tend to form flat domains.     

Molecular organization in two-dimensional films of liquid II. Langmuir and Langmuir-Blodgett films of a perylene-like dye mixed with liquid crystals having a terminal cyano group crystalline mixtures

Langmuir and Langmuir-Blodgett (LB) films of a perylene-like compound and its binary mixtures with 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4"-cyano-p-terphenyl (5CT) have been studied. On the basis of the surface pressure-area isotherms, the molecular organization on the air-water interface has been estimated. Information about the miscibility or the phase separation of components in the binary mixtures has been obtained. The spectroscopic study of the LB films has allowed conclusions to be drawn about the arrangement of the molecules on the quartz slides. The fluorescence spectra of the LB films of the perylene-like compound have revealed the formation of self-aggregates.     

Guest–host systems containing anthraquinone dyes with multiple visible transitions giving positive and negative dichroic order parameters: an assessment of principal molecular axes and computational methods

ABSTRACT

Three 1,4-disubstituted anthraquinone dyes with bis(4-n-butylphenyl) substituents connected via amine or amide linking groups have been studied as guest molecules dissolved in the nematic host E7. UV-visible absorption spectroscopy has shown each of the dyes to exhibit multiple absorption bands in the visible region, and dichroic order parameters obtained from polarised spectra of aligned guest–host samples were shown to differ significantly between the bands for each dye, and between the dyes. Time-dependent density functional theory calculations indicated that each dye exhibits several transitions, giving transition dipole moment vectors with a range of orientations, and fully atomistic molecular dynamics simulations of the guest–host mixtures showed differences in the calculated molecular alignments of the dyes. Combining the results from these two sets of calculations enabled a comparison of molecular alignment models based on the moments of inertia and the surface tensors of the dyes. The match between calculated and experimental values was improved significantly when using the surface tensor rather than the moment of inertia model, indicating that the shapes of the molecular surfaces of these dyes are crucial to their alignment. A novel method of calculating polarised UV-visible absorption spectra of dyes in liquid crystal hosts is also presented.     

Pure and mixed films of a nitrostilbene derivative at the air-water interface, Langmuir-Blodgett multilayer fabrication, and optical characterization

This paper reports the preparation and characterization of pure Langmuir and Langmuir-Blodgett (LB) films of a stilbene derivative containing two alkyl chains, namely 4-dioctadecylamino-4'-nitrostilbene. Mixed films incorporating docosanoic acid and the stilbene derivative are also studied. Brewster angle microscopy (BAM) analysis has revealed the existence of randomly oriented three-dimensional (3D) aggregates, spontaneously formed immediately after the spreading process of the stilbene derivative onto the water surface. These 3D aggregates coexist with a Langmuir film that shows the typical gas, liquid, and solid-like phases in the surface pressure and surface potential vs area per molecule isotherms, indicative of an average preferential orientation of the stilbene compound at the air-water interface, and a gradual molecular arrangement into a defined structure upon compression. A blue shift of 55 nm of the reflection spectrum of the Langmuir film with respect to the spectrum of a chloroform solution of the nitrostilbene indicates that two-dimensional (2D) H-aggregates are formed at the air-water interface. The monolayers are transferred undisturbed onto solid substrates with atomic force microscopy (AFM) revealing that the one layer LB films are constituted by a monolayer of the stilbene derivative together with some 3D aggregates. When the nitrostilbene compound is blended with docosanoic acid, the 3D aggregation is avoided in the Langmuir and Langmuir-Blodgett films, but does not limit the formation of 2D H-aggregates, desirable for second-order nonlinear optical response in the blue domain. The AFM images of the mixed LB films show that they are formed by a docosanoic acid monolayer and, on the top of it, a bilayer of the stilbene derivative.     

Preparation and characterisation of monolayers and Langmuir–Blodgett films of liquid crystal mixed with cubic silsesquioxanes

Polyhedral oligomeric silesquioxanes (POSS) with eight polyether substituents were mixed with the liquid crystal (LC) 4-octyloxy-4′-cyanobiphenyl and spread at the air/water interface. The surface pressure-area and surface potential-area isotherms were recorded for different weight ratios of both components. The obtained results showed that POSS molecules had beneficial influence on LC monolayer improving its stability and rigidity. Moreover, it was found that some LC–POSS mixtures collapse reversibly and form multilayer films on the top of LC monolayer. On the other hand, interfacial dilatational and shear rheology indicated decrease of elasticity of the films after mixing. Brewster angle microscopy revealed multilayer structure of the condensed film and formation of net-like structures in the expanded film. These films were successfully transferred on solid substrates using the Langmuir–Blodgett technique. The scanning electron microscopy images confirmed the film deposition and formation of networks by POSS–LC mixtures. These findings may be useful in the fabrication of electronic devices based on LCs.     

Preparation of ordered films containing a phenylene ethynylene oligomer by the Langmuir-Blodgett technique

This paper reports the fabrication and characterization of Langmuir and Langmuir-Blodgett (LB) films incorporating an oligo(phenylene-ethynylene) (OPE) derivative, namely, 4-[4-(4-hexyloxyphenylethynyl)-phenylethynyl]-benzoic acid (HBPEB). Conditions appropriate for deposition of monolayers of HBPEB at the air-water interface have been established and the resulting Langmuir films characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and ultraviolet reflection spectroscopy. The Langmuir films are readily transferred onto solid substrates, and one-layer LB films transferred at several surface pressures onto mica substrates have been analyzed by means of atomic force microscopy, from which it can be concluded that 14 mN/m is an optimum surface pressure of transference, giving well-ordered homogeneous films without three-dimensional defects and a low surface roughness. The optical and emissive properties of the LB films have been determined with significant blue-shifted absorption spectra indicating formation of two-dimensional H aggregates and a Stokes shift illustrating the effects of the solid-like environment on the molecular chromophore.     

Characterization of Langmuir and Langmuir-Blodgett films of a thiomacrocyclic ionophore by surface pressure and AFM

The new synthesized thiomacrocyclic ionophore 4-phenyl-4-sulfide-11-(1-oxodecyl)-1,7-dithia-11-aza-4-phosphacyclotetradecane has proven to form Langmuir and Langmuir-Blodgett (LB) films. This ionophore shows a large affinity for copper(II) ions. Thus, the influence of the subphase composition on the surface pressure-area isotherms has been studied. The LB films have been observed by AFM and the effect of the subphase composition and the deposition surface pressure on the LB films is discussed. AFM image morphology has been correlated to the ionophore molecular structure. Surface pressure-area isotherms and AFM images show that the presence of copper(II) ions has an important role in the film structure.     

Fibril-like aggregate formation of peptide carboxylate Langmuir films analyzed by surface pressure, surface dipole moment, and infrared spectroscopy

The fibril formation process of a synthetic peptidolipid compound in a Langmuir monolayer at the air-water interface has been analyzed by surface pressure and surface dipole moment-area isotherms, followed by infrared spectral analysis of related Langmuir-Blodgett films. Thus far, the analysis of randomly oriented molecular assemblies has been a difficult matter, especially for spectroscopic measurements. In the present study, the Langmuir film isotherms were discussed in detail, and they have readily been correlated to the infrared spectra. For the spectral analysis, infrared multiple-angle incidence resolution spectroscopy (MAIRS) was employed, which was compared to the results by conventional techniques. Since the peptide assemblies greatly responded to a metal surface, the reflection-absorption technique was not useful for our analysis. Instead, MAIRS was found to be powerful to reveal the anisotropic structure of the Langmuir films, and a disordered molecular architecture has been revealed via the molecular orientation analysis. As a result, the fibril-like aggregation formation process during the monolayer compression, which was suggested by previous topographical study, has been found to be due to the stiff domain formation in the Langmuir films.     

Liquid crystal codendrimers with a statistical distribution of phenolic and mesogenic groups: behavior as Langmuir and Langmuir-Blodgett films

The first series of carbosilane liquid crystal codendrimers with groups of different polarity has been synthesized. The chemical structure of the newly synthesized materials and the composition of the codendrimers were studied by NMR spectroscopy and MALDI-TOF MS. It was found that the codendrimers tend to form stable Langmuir films at the air-water surface. The influence of composition and generation number on surface pressure-surface area isotherms and film stability was studied. Brewster angle microscopy confirmed the different phase behavior for monolayers of different codendrimer composition and generation number. It was found that side groups of fifth-generation codendrimers do not segregate, unlike those of lower generations. Langmuir-Blodgett films on solid substrates were obtained by the vertical dipping method. X-ray diffraction showed that the codendrimers with 75% of hydrophobic mesogenic terminal groups formed ordered layers parallel to the substrate.     

Monolayer properties of mixtures of poly(n-stearyl methacrylate), poly(n-lauryl methacrylate), and their corresponding copolymers

The monolayer properties of poly(n-stearyl methacrylate), poly(n-lauryl methacrylate), and their mixtures at various ratios of the two polymers have been studied from the measurements of their surface pressure–area isotherms at air–water interface. The monolayer properties of their mixtures have been compared with those of their corresponding copolymers. The results show that the isotherms of the mixed monolayers have two break points at higher pressures than that of poly(n-lauryl methacrylate). This suggests that the mixtures may form more stable films that consist of separate phases of the two homopolymers, although each phase may contain a small amount of the other. The isotherms of the copolymer monolayers indicate a phase transition from liquid condensed to solid film between 50 segment mole % and 70% poly(n-stearyl methacrylate). The monclayer of these copolymers has properties that differ from those of the corresponding mixtures of two pure homopolymers and is more compatible than the mixtures of pure homopolymers.