宽带超薄完美吸波体设计及在圆极化倾斜波束天线雷达散射截面缩减中的应用研究

为了缩减天线带内雷达散射截面(radar cross section, RCS), 在双频带完美吸波材料的基础上, 通过缩小两吸波率峰值之间的距离, 设计出了一种频带较宽的超薄完美吸波体.该吸波体由两层金属及其中间的有耗介质组成, 底面金属不刻蚀, 顶面由方形贴片和绕其四周的开口方环组成, 该结构具有低频点LC谐振和高频点偶极子谐振的特征.仿真和实验结果表明: 该吸波体具有极化不敏感和宽入射角的特征, 其在厚度小于0.01λ的条件下, 具有8.2%的半波功率相对带宽, 最大吸波率的峰值为91.6%和96.5%. 将吸波体用于圆极化的倾斜波束 (tilted beam, TB)天线, 仿真和测试结果表明: 该天线在保持增益不变的条件下, 不仅轴比得到改善, 有效带宽得到拓展, 且在5.5–6.5 GHz范围内TB天线的RCS缩减至少在3 dBsm以上, 在谐振频点处最大缩减幅度分别为11 dBsm和8 dBsm; 在两谐振点处鼻锥方向-36°–+36°范围内, TB天线的RCS缩减均有明显效果. 关键词： 超薄完美吸波体 TB天线 雷达散射截面 圆极化     

极薄宽角度平面超材料吸波体仿真与实验验证

仿真和实验验证了厚度极薄的平面结构超材料吸波体, 该吸波体采用加载交指电容的耶路撒冷十字结构, 通过增加单元间的耦合电容显著降低了其工作频率. 测试结果表明, 该超材料吸波体在1.58 GHz, 吸收率峰值为88.48%, 其厚度为2 mm, 约为1/95工作波长, 吸波体的单元尺寸为11 mm, 约为1/17工作波长. 此外, 通过金属通孔将耶路撒冷十字结构与金属底板相连接, 使其对斜入射横电和横磁极化电磁波具有宽角度吸收特性, 在60°时依然具有较高的吸收率, 且吸收峰频率几乎不发生偏移, 从而使其更具实用价值. 关键词： 极薄 宽角度 超材料吸波体     

Solar broadband metamaterial perfect absorber based on dielectric resonant structure of Ge cone array and InAs film

The broadband metamaterial perfect absorber has been extensively studied due to its excellent characteristics and promising application prospect. In this work a solar broadband metamaterial perfect absorber is proposed based on the structure of the germanium (Ge) cone array and the indium arsenide (InAs) dielectric film on the gold (Au) substrate. The results show that the absorption covers the whole ultraviolet-visible and near-infrared range. For the case of A > 99%, the absorption bandwidth reaches up to 1230 nm with a wavelength range varied from 200 nm to 1430 nm. The proposed absorber is able to absorb more than 98.7% of the solar energy in a solar spectrum from 200 nm to 3000 nm. The electromagnetic dipole resonance and the high-order modes of the Ge cone couple strongly to the incident optical field, which introduces a strong coupling with the solar radiation and produces an ultra-broadband absorption. The absorption spectrum can be feasibly manipulated via tuning the structural parameters, and the polarization insensitivity performance is particularly excellent. The proposed absorber can possess wide applications in active photoelectric effects, thermion modulators, and photoelectric detectors.     

Extremely-broad band metamaterial absorber for solar energy harvesting based on star shaped resonator

A new metamaterial absorber (MA) is investigated and shown numerically for solar energy harvesting for future solar cell applications. The structure consists of two metals and one dielectric layer having different thicknesses. Owing to this combination, the structure exhibits plasmonic resonance characteristics. In the entire spectrum of visible frequency region, the obtained results show that investigated structure has perfect absorptivity which is above 91.8%. Proposed structure also has 99.87% absorption at 613.94 THz and 99% absorption between 548 and 669 THz. The proposed structure also shows both polarization and angle independency for the entire visible region. The MA based solar cell proposes high absorption with an upper ratio of 90% in the widest range of visible spectrum comparing to the studies in literature. Hence, the proposed metamaterial absorber solar cells can be used for invisibility in entire spectrum of visible light. The absorption characteristics of the solar absorber are also investigated for infrared and ultraviolet region. The enhancement of absorption of the structure will provide new type of sensors in these frequency ranges.     

低雷达散射截面的超薄宽带完美吸波屏设计研究

提出了一种基于PMA单元结构的超薄宽带完美吸波屏设计方法. 该方法将多层拓展带宽的技术与单层多谐振方法有机结合, 实现带宽拓展的同时, 保持了完美吸波屏结构简单、无集总元件的特点, 易于实际加工和应用. 以双层三谐振超薄宽带完美吸波屏为例, 结合其等效电路, 理论上验证了所设计吸波屏的吸波机理, 同时验证了方法的有效性. 仿真分析该吸波屏具有低雷达散射截面、极化不敏感和宽入射角的特征. 仿真和实测结果表明: 该吸波屏在厚度为0.01 λ的条件下, 具有14.1%的半波功率带宽;-3 dBsm的雷达散射截面缩减带宽为18.9%, 在法线方向的最大缩减量为23 dBsm, 在法向±40°内具有较好的雷达散射截面减缩效果. 关键词： 完美吸波屏 宽带 雷达散射截面 等效电路     

菲涅耳聚光系统下砷化镓电池输出特性研究

对理论聚光比为676的菲涅耳聚光系统下单片砷化镓太阳电池及由六片砷化镓电池的串联组件的输出特性进行分析。建立三结砷化镓电池输出特性的单指数数学模型,并与实验进行了对比。理论计算与实验吻合较好,误差在7.6%以内。实验结果表明,在相同理论聚光比下,单片电池系统能流聚光比为390,六片电池组件系统能流聚光比为281;聚光后单片电池的短路电流与峰值功率分别放大322倍与316倍,六片电池组件系统的短路电流与峰值功率分别放大275倍与272倍;电池表面能流密度为0.321MW/m2时电池的输出功率达到最大,电池表面温度高于323K将影响其工作稳定性;聚光系统的透射率每增加0.01系统效率升高约0.227%。全天累积直射辐照度为17.212MJ/m2条件下测得单片电池全天发电量为0.015kW.h,六片电池串联组件的全天发电量为0.076kW.h。     

Investigation of Euler spiral nanoantenna and its application in absorption enhancement of thin film solar cell

A theoretical study on nanoantenna and its application in enhancing the performance of the thin film solar cell (TFSC) is presented. In this work, a novel design of nanoantenna i.e. Euler spiral nanoantenna (ESNA) is introduced, which has evolved after bending the conventional dipole nanoantenna in the manner of Euler spiral. The bending is performed up to an optimum length so that the antenna can equally respond to the two orthogonally polarized waves. Then the proposed nanoantenna in turnstile manner is examined for the intended application of enhancing the absorption in TFSCs. The antenna is placed on the absorber layer (Si amorphous) of the TFSC with a coating of Zinc Oxide. The simulation results show that the proposed ESNA can significantly increase the absorption in the absorber layer of the TFSC. The performance in terms of absorption and quantum efficiency of the solar cell incorporated with ESNA has been studied. ESNA confines the electric field in a larger area which results in absorption increase. The simulation results show that proposed ESNA can enhance the absorption up to 97.6% in the absorber layer and the photocurrent is enhanced by a factor of 1.39. To the best of our knowledge, this is the first study on Euler spiral nanoantenna and so as in its application with solar cells.     

Perfect metamaterial absorber design for solar cell applications

A new perfect metamaterial absorber based on metal-dielectric layer combination is designed and investigated to be used in solar cell application. The designed structure is particularly presented in the range of solar spectrum in order to utilize the solar energy effectively. Parametric studies with respect to the dimensions of the structure are carried out to characterize the absorber. According to the results, it is found that the metamaterial absorber has 99.99% absorption at 403.5 THz. In addition, the fractional bandwidth (FBW) of the absorption region is calculated and 22.2% FBW is obtained. Moreover the simulation results showed that the proposed design is also polarization and incident angle insensitive. As a result, the proposed metamaterial absorber provides perfect absorption for visible and near infrared frequency ranges and can be used for the realization of more efficient new solar cells.     

Tunable dual-band terahertz graphene absorber with guided mode resonances

A tunable dual-band terahertz absorber is designed and investigated. The unit cell of the proposed absorber consists of a graphene monolayer on a guided-mode resonant filter. The graphene absorber presents > 40% absorption at two resonance frequencies, which is attributed to the guided mode resonances with different mode numbers. The electric field intensity distribution is analyzed to disclose the physical mechanism of such a dual-band absorption effect. Furthermore,the influence of optical properties of graphene, including Fermi level and relaxation time, on the absorption spectra are investigated. Finally, the influence of geometric parameters on the absorption spectrum is studied, which will provide useful guidance for the fabrication of this absorber. We believe that the results may be useful for developing the next-generation graphene-based optoelectronic devices.     

基于电阻膜与分形频率选择表面的超薄宽频带超材料吸波体的设计

设计了一种基于一阶Minkowski分形双方环(Minkowski fractal double square loop, MFDSL)电谐振器结构与电阻膜复合的超薄、 宽频带、极化不敏感和宽入射角的超材料吸波体. 该吸波体的基本结构单元由MFDSL电谐振器结构、方块电阻膜、电介质基板和金属背板组成. 采用时域有限差分算法对这种复合结构吸波体的电磁波吸收特性进行数值模拟分析. 模拟得到的反射率和吸收率表明: 该吸波体在7.5-42 GHz之间对入射电磁波具有大于90%以上的强吸收特性. 模拟得到的不同极化角和不同入射角下的吸收率表明: 该吸波体具有极化不敏感和宽入射角特性. 进一步的数值模拟结果表明, 该复合结构吸波体对电磁波的吸收主要是基于电磁谐振和电路谐振机制, 通过方块电阻的设计可以实现工作频率范围的调节. 关键词： 电阻膜 分形频率选择表面 宽频带吸收     

基于超材料的偏振不敏感太赫兹宽带吸波体设计

本文设计了一种基于超材料的偏振不敏感太赫兹宽带吸波体.吸波体包含两层金属和一层中间介质,表面金属层每一个周期单元由五种尺寸接近的金属块按照相邻不同的规律排列成5×5的方形阵列.各种尺寸金属块分别产生单峰谐振吸收,五个谐振吸收峰相互靠近从而产生宽带吸收.通过研究吸波体表面电流和电场z分量分布情况可知,入射太赫兹能量的吸收主要是由y方向上电场引起的电偶极子振荡和z方向上磁场引起的磁极化产生,而且金属层的欧姆损耗起主要作用.仿真结果表明,吸波体吸收率在80%以上的带宽约为1.2 THz,最高吸收率可达98.7%,半峰全宽(FWHM)为1.6 THz,该宽带吸波体的厚度约为中心波长的二十分之一,对偏振方向不敏感,且能实现大角度吸收,在太赫兹频段的电磁隐身、测辐射热探测器以及宽带通信等领域有潜在的应用价值.     

一种温控的可调表面等离子体光学器件

设计加工了一个三层结构的表面等离子体光学吸收器件,表层结构为规则排列的金质椭圆形微粒。入射电磁波与椭圆形金粒作用激发表面等离子体共振时,由于沿长短轴方向谐振频率不同,使得该器件实现了在近红外谱段两个频率处对入射光近100%的吸收。实验样品用电子束曝光技术加工,实验测量与仿真设计结果一致。此外,由于改变器件表面介质的折射率可以有效调谐器件的谐振特性,通过在器件表面覆盖一向列型液晶层并由温度控制液晶层的折射率,实现了一种温控的可调表面等离子光学吸收器件,调节过程简单可靠并且可重复实现,调节范围达22nm。该器件由于其高吸收效率和可调谐特性,可在太阳能电池以及未来光子集成电路等方面得到重要应用。     

基于杂质光伏效应的镍掺杂对砷化镓太阳电池性能的影响

利用杂质光伏效应能够使太阳电池充分利用那些能量小于禁带宽度的太阳光子,从而提高电池的转换效率.为了更好地利用杂质光伏效应提高砷化镓太阳电池的转换效率,本文利用数值方法研究在砷化镓太阳电池中掺入镍杂质以形成杂质光伏太阳电池,分析掺镍对电池的短路电流密度、开路电压以及转换效率的影响;同时,探讨电池的陷光结构对杂质光伏太阳电池器件性能的影响.结果表明:利用杂质光伏效应掺入镍杂质能够增加子带光子的吸收,使得电池转换效率提高3.32%;转换效率的提高在于杂质光伏效应使电池的红外光谱响应得到扩展;另外,拥有良好的陷光结构是取得好的杂质光伏效应的关键.由此得出:在砷化镓太阳电池中掺镍形成杂质光伏太阳电池是一种能够提高砷化镓太阳电池转换效率的新方法.     

极化控制的双波段宽带红外吸收器研究

红外吸收器在红外隐身、辐射制冷、红外探测、传感器等方面有重要的应用前景.一维光栅型吸收器由于其结构简单、易于加工的优势备受关注,然而其不足之处是频带很窄,且只对一种极化有效.本文提出了一种基于简单一维周期结构的双波段宽带吸收器,对横磁波和横电波都有效,且吸波频段随入射波的极化方式而改变.该结构的基本单元由八个梯度排列的子单元构成,每个子单元由两层金属-介质双层膜垂直层叠组成.全波仿真结果表明,在1.68—2μm波段,该结构对横磁波吸收超过90%,而对横电波吸收很小(小于6%);在3.8-3.9μm波段,该结构对横电波吸收超过90%,而对横磁波吸收很小(小于5%).另外,该结构具有宽角度吸收特性,当入射角增大到60°时仍然能够保持较高的吸收率和较宽的吸收频带.     

金属纳米颗粒对有机太阳能电池光吸收效率影响的研究

借助时域有限差分法,对几种常见金属纳米颗粒影响有机太阳能电池光吸收效率的因素及其内部物理机制进行了研究.首先对金属纳米颗粒激发局域表面等离子共振的场分布特点进行分析,对比其在电池不同功能层中对光吸收率的影响;其次基于米氏理论与电共振效应,得出金属纳米颗粒的结构参量对局域表面等离子共振位置及强度的影响规律,并以此进行优化设计.结果表明,具有高对称性形貌的金属纳米颗粒以小尺寸密堆积结构引入电池活性层,能够促进电池光吸收增强三倍以上.     

金属纳米颗粒对有机太阳能电池光吸收效率影响的研究

借助时域有限差分法,对几种常见金属纳米颗粒影响有机太阳能电池光吸收效率的因素及其内部物理机制进行了研究.首先对金属纳米颗粒激发局域表面等离子共振的场分布特点进行分析,对比其在电池不同功能层中对光吸收率的影响;其次基于米氏理论与电共振效应,得出金属纳米颗粒的结构参量对局域表面等离子共振位置及强度的影响规律,并以此进行优化设计.结果表明,具有高对称性形貌的金属纳米颗粒以小尺寸密堆积结构引入电池活性层,能够促进电池光吸收增强三倍以上.     

Optimization of diode-pumped passively Q-switched mode-locked c-cut Nd:GdVO4 laser with a GaAs saturable absorber

By considering the single-photon absorption (SPA) and two-photon absorption (TPA) processes in the GaAs saturable absorber, the coupled rate equations for a diode-pumped passively Q-switched and mode-locked (QML) laser with GaAs coupler under Gaussian approximation are given. The key parameters of an optimally coupled passively QML laser can be obtained by numerically solving these equations. These key parameters include the parameters of the gain medium, the saturable absorber and the resonator, which can maximize the pulse energy of singly Q-switched envelope. Sample calculations for a diode-pumped passively Q-switched mode-locked c-cut Nd:GdVO₄ laser with a GaAs saturable absorber are presented to demonstrate the optimal method applicable.     

Broad-band polarization-independent metamaterial absorber for solar energy harvesting applications

A novel broad-band polarization-independent with wide-angle metamaterial absorber(MA) is investigated and demonstrated for solar energy harvesting applications. The proposed MA is composed of two metal layers which have different thickness and a dielectric layer which is sandwiched between these metal layers. By this combination, the proposed MA indicates plasmonic resonance characteristic. Numeric results show that proposed MA has perfect absorption characteristic which is above 88.28% with wide-angle for all visible region. It shows almost perfect absorption of 98.4% at the resonance frequency of 621.76 THz and has also 90% absorption between frequencies of 445 THz and 770 THz which is nearly all visible light region. Besides, numerical results validate that the proposed MA could achieve very high absorption at wide-angles of incidence for both transverse electric (TE) and transverse magnetic (TM) waves.. The proposed MA and its variations enable for solar cell applications due to have upper ratio of 90% in the widest range of visible spectrum comparing to the studies in literature. In order to show additional features of the proposed structure, parametric studies are realized and discussed. Furthermore, the absorption characteristic of proposed MA is investigated for infrared and ultraviolet region. The enhancement of absorption of the structure will provide new type of sensors in these frequency ranges.     

A multi-band and polarization-independent perfect absorber based on Dirac semimetals circles and semi-ellipses array

We design a four-band terahertz metamaterial absorber that relied on the block Dirac semi-metal(BDS). It is composed of a Dirac material layer, a gold reflecting layer, and a photonic crystal slab(PCS) medium layer. This structure achieved perfect absorption of over 97% at 4.06 THz, 6.15 THz, and 8.16 THz. The high absorption can be explained by the localized surface plasmon resonance(LSPR). And this conclusion can be proved by the detailed design of the surface structure. Moreover, the resonant frequency of the device can be dynamically tuned by changing the Fermi energy of the BDS. Due to the advantages such as high absorption, adjustable resonance, and anti-interference of incident angle and polarization mode, the Dirac semi-metal perfect absorber(DSPA) has great potential value in fields such as biochemical sensing, information communication, and nondestructive detection.     

Surface plasmon-enhanced dual-band infrared absorber for VO_x-based microbolometer application

We propose a periodic structure as an extra absorption layer(i.e., absorber) based on surface plasmon resonance effects, enhancing dual-band absorption in both middle wavelength infrared(MWIR) and long wavelength infrared(LWIR)regions. Periodic gold disks are selectively patterned onto the top layer of suspended SiN/VO_2/SiN sandwich-structure.We employ the finite element method to model this structure in COMSOL Multiphysics including a proposed method of modulating the absorption peak. Simulation results show that the absorber has two absorption peaks at wavelengths λ =4.8 μm and λ = 9 μm with the absorption magnitudes more than 0.98 and 0.94 in MWIR and LWIR regions, respectively. In addition, the absorber achieves broad spectrum absorption in LWIR region, in the meanwhile, tunable dual-band absorption peaks can be achieved by variable heights of cavity as well as diameters and periodicity of disk. Thus, this designed absorber can be a good candidate for enhancing the performance of dual band uncooled infrared detector, furthermore, the manufacturing process of cavity can be easily simplified so that the reliability of such devices can be improved.