Synthesis and mesomorphic properties of Cu-coordinating liquid crystalline polysilsesquioxanes with heptyl side groups

In order to study the influence of the concentration of a flexible group on the liquid crystal behaviour of copper-containing complexes, series of Cu-coordinated, beta-diketone-based liquid crystalline polysilsesquioxanes (abbr. H-DK-Cu) and random copolymethylsilsesquioxanes (abbr. Me-DK-Cu), have been synthesized by the hydrosilylation reaction of a vinyl-terminated beta-diketone and 1-heptene with the polyhydrosilsesquioxane (H-T) and with the random copolymethylhydrosilsesquioxane (Me-T), followed by reaction with Cu(NH₃)₄Cl₂. Their mesomorphic properties were investigated by differential scanning calorimetry and optical polarizing microscopy. The H-DK-Cu and Me-DK-Cu complexes with M _w of approximately 1 x 10⁴ are thermotropic liquid crystalline polymers and their clearing temperature and mesophase ranges are lower than those of the corresponding Cu-coordinated, beta-diketone-based liquid crystalline polymethylsilsesquioxanes (Cu-FBDKLCP) without the n-heptyl flexible group. However, their liquidity within the temperature range of the liquid crystal state is better. The results are mainly attributed to the heptyl, flexible side group.     

Syntheses and crystal structures of butterfly M2Te2 complexes of molybdenum and tungsten with functionalized cyclopentadienyl ligands

Reactions of singly-bonded dinuclear complexes [(η⁵-CH₃O₂CC₅H₄)₂M₂(CO)₆] (I, M?=?Mo; II, M?=?W) with the diarenylditelluride [4-CH₃C₆H₄Te]₂ in refluxing toluene for 4–6?h afforded dinuclear complexes 1 and 2 trans/ae-[(η⁵-RC₅H₄)₂M₂(CO)₄(μ-ArTe)₂] (Ar?=?4-CH₃C₆H₄Te). Complexes 1 and 2 were also synthesized by reactions of triply-bonded dinuclear complexes [(η⁵-CH₃O₂CC₅H₄)₂M₂(CO)₄] (III, M?=?Mo; IV, M?=?W) with [4-CH₃C₆H₄Te]₂ in refluxing toluene for 1?h. Both complexes have been characterized by elemental analysis, ¹H NMR, ¹³C NMR and IR spectroscopy and X-ray diffraction. Preliminary low-temperature NMR experiments on complexes 1 and 2 have revealed that in solution each complex goes through a rapid inversion of the butterfly four-membered ring M₂Te₂.     

Effect of fluorinated nematic mesogens on phase behaviors and optical properties of chiral liquid crystalline polysiloxanes

A series of new chiral side-chain liquid crystalline polymers (P₁–P₇) have been synthesized with poly(methylhydrogeno)siloxane, two chiral liquid crystalline monomers, cholesteryl-4-allyloxybenzoate (M₁) and cholesteryl 4-(10-undecylen-1-yloxy) benzoate (M₂), and a nematic liquid crystalline monomer, 4-(trifluoromethyl)phenyl 4-(undec-10-enoyloxy)benzoate (M₃). The chemical structures and liquid crystalline properties of the synthesized polymers have been investigated by FTIR, ¹H-NMR, differential scanning calorimetry (DSC), polarizing optical microscopy (POM), thermogravimetric analysis (TGA), and X-ray diffraction (XRD). All chiral polymers show wide mesophase temperature ranges and a high thermal stability with decomposition temperatures (T _d) at 5 % weight loss greater than 300 °C. P₁–P₄ display a single cholesteric phase, but P₅–P₇ containing more fluorinated units show a smectic A (SA) phase besides a cholesteric phase. The optical properties of the polymers have been characterized by circular polarization spectra and optical rotation analysis. The cholesteric polymers P₃ and P₄ exhibit different colors at room temperature, and the color can remain over 24 months. The maximum reflection bands of polymers P₁–P₄ shift to long wavelength with increasing the content of M₃ in the polymer systems. For P₅–P₇, the reflection wavelengths change sharply around the temperature of the SA–Ch phase transition. The specific rotation value of P₂ smoothly decreases from ?8.2° to ?0.29° when it is heated, but the specific rotation value of polymer P₇ changes from negative value to positive value on heating cycle. The optical properties of the polymers offer tremendous potential for various optical applications.     

Novel Copolymers of Styrene. 8. Some Ring-Disubstituted Ethyl 2-Cyano-3-Phenyl-2-Propenoates

Electrophilic trisubstituted ethylenes, ring-disubstituted ethyl 2-cyano-3-phenyl-2-propenoates, RPhCH?C(CN)CO₂C₂H₅ (where R is 3-Br-4-CH₃O, 5-Br-2-CH₃O, 3-F-2- CH₃, 3-F-4-CH₃, 4-F-2-CH₃, 4-F-3-CH₃, 5-F-2-CH₃, 2-Cl-5-NO₂, 2-Cl-6-NO₂, 4-Cl-3- NO₂) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-disubstituted benzaldehydes and ethyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 5-Br-2-CH₃O (1.02) > 4-Cl-3-NO₂ (0.93) > 3-F-4-CH₃ (0.81) > 2-Cl-6-NO₂ (0.77) > 2-Cl-5-NO₂ (0.71) > 3-Br-4-CH₃O (0.66) > 4-F-3-CH₃ (0.60) > 3-F-2-CH₃ (0.38) > 4-F-2-CH₃ (0.31) > 5-F-2-CH₃ (0.16). Relatively high T_g of the copolymers in comparison with that of polystyrene indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 250–500°C range with residue (2–26% wt.), which then decomposed in the 500–800°C range.     

Side chain cholesteric liquid crystalline elastomers: synthesis and phase behaviour

A series of new side chain cholesteric liquid crystalline elastomers (P-2–P-6) containing the nematic crosslinking monomer 4-(10-undecen-1-yloyloxy)benzoyl-4′-allyloxybenzoyl-p-benzenediol bisate (M-1) and the cholesteric monomer 4-cholesteryl 4-(10-undecen-1-yloyloxy)benzoate (M-2) were synthesized. The chemical structures of the monomers and elastomers obtained were confirmed by FTIR and ¹H NMR spectroscopy. Their liquid crystalline properties and phase behaviour were investigated by differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction. The effect of the crosslinking units on phase behaviour is discussed. Elastomers containing less than 20?mol?% of the crosslinking units showed elasticity, reversible phase transitions and cholesteric Grandjean texture. The experimental results demonstrated that the glass transition and isotropization temperatures of P-2–P-6 increased with the increasing concentration of crosslinking unit M-1.     

Novel Copolymers of Styrene. 12. Halogen Ring-Substituted Methyl 2-Cyano-3-Phenyl-2-Propenoates

Electrophilic trisubstituted ethylenes, halogen ring-substituted methyl 2-cyano-3-phenyl-2-propenoates, RPhCH=C(CN)CO₂CH₃ (where R is 3-Br-4-CH₃O, 5-Br-2-CH₃O, 2-F-5-CH₃, 2-F-6-CH₃, 4-F-3-CH₃, 4-F-3-PhO, 2-F-5-I, 2-F-6-I, 2-F₃C, 4-F₃C) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and methyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 2-F-5-CH₃ (6.4) > 4-F-3-PhO (5.6) > 4-F₃C (4.8) > 3-Br-4-CH₃O (3.7) > 2-F-5-I (3.6) > 2-F₃C (2.2) > 2-F-6-I (2.1) > 5-Br-2-CH₃O (1.9) > 4-F-3-CH₃ (1.8) > 2-F-6-CH₃ (1.2). Relatively high T _g of the copolymers in comparison with that of polystyrene indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200-500°C range with residue (2–21% wt), which then decomposed in the 500–800°C range.     

Preparation and phase behavior of side‐chain cholesteric liquid‐crystalline elastomers

A series of new side‐chain cholesteric elastomers derived from cholesteryl 4‐(10‐undecylen‐1‐yloxy)‐4′‐ethoxybenzoate and phenyl 4,4′‐bis(10‐undecylen‐1‐yloxybenzoyloxy‐p‐ethoxybenzoate) was synthesized. The chemical structures of the monomers were confirmed by elemental analyses, Fourier transform infrared, and ¹H NMR and ¹³C NMR spectra. The mesomorphic properties of elastomers were investigated with differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X‐ray diffraction measurements. The influence of the content of the crosslinking unit on the phase behavior of the elastomers was examined. Monomer M₁ showed a cholesteric phase, and M₂ displayed smectic and nematic phases. The elastomers containing <15 mol % of the crosslinking units revealed reversible mesomorphic phase transition, wide mesophase temperature ranges, and high thermal stability. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3315–3323, 2005     

Novel Copolymers of Styrene. 3. Some Ring-Substituted Butyl 2-Cyano-3-Phenyl-2-Propenoates

Novel trisubstituted ethylenes, ring-substituted butyl 2-cyano-3-phenyl-2-propenoates, RPhCH=C(CN)CO₂C₄H₉ (where R is 2-C₆H₅CH₂O, 3-C₆H₅CH₂O, 4-C₆H₅CH₂O, 4-CH₃COO, 3-CH₃CO, 4-CH₃CO, 4-CH₃CONH, 2-CN, 3-CN, 4-CN, 4-(CH₃)₂N, 4-(C₂H₅)₂N) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and butyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) for the monomers is 4-C₆H₅CH₂O (6.39) > 2-C₆H₅CH₂O (2.06) > 3-CH₃CO (1.86) > 3-C₆H₅CH₂O (1.78) > 4-CH₃COO (1.58) > 3-CN (1.47) > 4-CN (1.21) > 4-(C₂H₅)₂N (1.19) > 4-(CH₃)₂N (1.18) > 2-CN (1.04) > 4-CH₃CO (0.71) > 4-CH₃CONH (0.63). Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (3.6–9.5% wt), which then decomposed in the 500–800°C range.     

Synthesis,structure and properties of new chiral liquid crystalline monomers and homopolysiloxanes containing menthyl groups

The synthesis is described of four new chiral liquid crystalline monomers (M₂–M₅ ) and their corresponding side‐chain homopolysiloxanes (P₂–P₅ ) containing menthyl groups. Chemical structures were characterised using FT‐IR or ¹H NMR spectra, and specific optical rotations were evaluated with a polarimeter. The phase behaviour and mesomorphic properties of the new compounds were investigated by differential scanning calorimetry, thermogravimetric analysis, polarising optical microscopy, UV/visible/NIR spectrocopy and X‐ray diffraction. The monomers and homopolymers with more aryl segments showed noticeably lower specific optical rotation value. The monomers M₂–M₅ formed a cholesteric or blue phase when a flexible spacer was inserted between the rigid mesogenic core and the terminal menthyl groups by reducing the steric effect. M₂–M₅ revealed enantiotropic cholesteric phase. Moreover, M₂ also exhibited a monotropic smectic A (SmA) phase, and M₄ also exhibited a cubic blue phase on cooling. The selective reflection of light shifted to the long wavelength region with increasing rigidity of the mesogenic core for M₂–M₅ . P₂–P₅ exhibited SmA phases, and the mesogenic moieties were ordered in smectic orientation with their centres of gravity in planes. Melting or glass transition temperature and the clearing temperature increased, and the mesophase temperature range widened with increasing rigidity of the mesogenic core.     

Preparation and characterization of side chain cholesteric liquid crystalline polysiloxanes containing two chiral groups

A series of liquid crystalline (LC) polysiloxanes containing diosgeninyl and menthyl groups (from monomers M ₁ and M ₂, respectively) were synthesized. The chemical structures of the monomers and polymers obtained were confirmed by elemental analysis, Fourier transform infrared spectroscopy, proton NMR and carbon‐13 NMR. The LC properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X‐ray diffraction. Monomer M ₁ showed cholesteric oily‐streak and spiral textures. Copolymers P ₂–P ₅ exhibited cholesteric phases. With increasing concentration of M ₂ units, the glass transition and clearing temperatures decreased. Experimental results demonstrated that a flexible polymer backbone and a long flexible spacer tended to favour a lower glass transition temperature, higher thermal stability, and wider mesophase temperature range.     

Synthesis and properties of novel liquid crystalline materials with super high birefringence: styrene monomers bearing diacetylenes, naphthyl, and nitrogen-containing groups

Three new liquid crystal asymmetrical styrene monomers bearing diacetylenes, naphthyl, and nitrogen-containing groups were successfully synthesized from 2-(bromoethynyl)-6-(hexyloxy)naphthalene, 4-(4-bromo-2-vinylphenyl)-2-methylbut-3-yn-2-ol, and derivatives of 4-ethynylaniline. The molecular structures of these compounds were confirmed by FTIR, ¹H NMR spectroscopy, elemental analysis, and mass spectrometry. The liquid crystalline properties of monomers were characterized by differential scanning calorimetry and polarized light microscopy. Results indicated that all the compounds exhibited the nematic phase in liquid crystal state and super high optical birefringence of 0.5-0.8. The change of terminal nitrogen-containing group affected the birefringence values in the order of -N(CH₃)₂<-NH₂<-NCS. Moreover, measurements using UV-vis and fluorescence spectroscopy showed their good photoluminescence properties and high quantum efficiency of 0.4-1.0.     

Novel copolymers of styrene. 3. Some ring-substituted propyl 2-cyano-3-phenyl-2-propenoates

Novel trisubstituted ethylenes, ring-substituted propyl 2-cyano-3-phenyl-2-propenoates, RPhCH?C(CN)CO₂C₃H₇ (where R is 2-C₆H₅CH₂O, 3-C₆H₅CH₂O, 4-C₆H₅CH₂O, 4-CH₃COO, 3-CH₃CO, 4-CH₃CONH, 2-CN, 3-CN, 4-CN, 4-(CH₃)₂N, 4-(C₂H₅)₂N) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and propyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (2.7–8.6% wt.), which then decomposed in the 500–800°C range.     

New side chain ferroelectric liquid crystalline polymers based on (2S, 3S)-2-chloro-3-methylpentanoic acid: synthesis and phase behaviour

The synthesis of four new chiral mesogenic monomers (M₁–M₄) and side chain ferroelectric liquid crystalline polymers containing (2S, 3S)-2-chloro-3-methylpentanoate is described. The chemical structures and phase behaviour of the monomers and polymers obtained in this study were characterised by Fourier transform infrared, proton nuclear magnetic resonance, polarising optical microscopy, differential scanning calorimetry, thermogravimetric analysis and X-ray diffraction. The selective reflection of light was investigated with ultraviolet/visible (UV/Vis). Their structure–mesomorphism relationships were discussed. M₁ and P₁ all showed a chiral smectic C (SmC*) phase. M₂ and M₃ revealed a SmC* phase and cholesteric phase, while their corresponding polymers P₂ and P₃ revealed a SmC* phase and smectic A (SmA) phase. M₄ only exhibited a cholesteric phase, whereas the corresponding polymers P₄ showed a SmA phase. Moreover, the selective reflection of light shifted to the long-wavelength region at the SmC* phase range and to the short-wavelength region at the cholesteric range with increasing temperature, respectively. The results seemed to demonstrate that the tendency towards melting temperature (T_m), glass transition temperature (T_g), isotropic temperature (T_i) and mesophase range for the monomers and polymers increased by increasing the mesogenic core rigidity or the number of phenyl ring. The polymerisation effect could lead to higher liquid crystalline to isotropic phase transition temperature, wider mesophase range and more ordered smectic phase formed. In addition, all the obtained polymers had a very good thermal stability and the corresponding T_d increased by increasing the number of phenyl ring.     

Synthesis and characterisation of chiral liquid crystalline elastomers containing four-arm crosslinking agent

A new series of side-chain chiral liquid crystalline elastomers derived from M₁ (cholest-5-3-ol(3β)-4-(2-propen-yloxy)]benzoate) and M_C(2,5-[3,5-bis(4-(3-(4-(allyloxy)phenyl)propanoyloxy)benzoyloxy)benzoic acid]isosorbide diester). The structures of monomers and elastomers measured by using Proton Nuclear Magnetic Resonance Spectra (¹H-NMR) and Fourier transform infrared spectroscopy (FTIR) separately are consistent with our design. IIP~VIP all appeared blue Grandjean (GJ) texture on the heating cycle or cooling cycle. The glass sheets of IIP~VIP were made under 150°C and measured its ultraviolet–visible spectrophotometry by PerkinElmer Lambda 950 instrument (Shelton, CT, USA). IIP~VIP all have absorptions at about 481~483 and 561~562 nm. The optical activities were measured at different temperatures on heating and cooling cycles. And the blue selective reflection of IIP~VIP on the round glass sheet can be seen. The elastomers containing less than 6 mol% of the crosslinking units displayed elasticity, reversible phase transition and high thermal stability. The glass transition temperatures reduced first and then increased, the isotropisation temperatures and the mesophase temperature ranges increased first and then decreased with increasing content of crosslinking unit. The thermogravimetric analysis (TGA) results showed that the temperatures at which 5% weight loss occurred (T_d) were greater than 310°C for all the polymers.     

Synthesis,structure, and properties of chiral liquid crystal monomers and polymers based on menthol

To study structure–mesomorphism relationships of the monomers and polymers based on menthol, four new chiral monomers ( M₁ – M₄ ) and the corresponding homopolymers ( P₁ – P₄ ) with menthyl group were synthesized. Their chemical structures, formula, phase behavior, and thermal stability were characterized by FTIR, ¹H NMR, ¹³C NMR, elemental analyses, differential scanning calorimetry, polarizing optical microscopy, X‐ray diffraction, and thermogravimetric analysis. The selective reflection of light was investigated with ultraviolet/visible spectrometer. The influence of the mesogenic core rigidity, spacer length, and menthyl steric effect on the mesomorphism of M₁ – M₄ and P₁ – P₄ was examined. By inserting a flexible spacer between the mesogenic core and the terminal menthyl groups, four target monomers and polymers could form the expected mesophase. Moreover, their melting temperature (T_m), glass transition temperature (T_g), clearing temperature (T_i), and mesophase range (ΔT) increased with increasing the mesogenic core rigidity; whereas the T_m and T_g decreased, T_i and ΔT increased with an increase of the spacer length. M₁ and M₂ showed monotropic and enantiotropic cholesteric phase, respectively, whereas M₃ and M₄ all revealed chiral smectic C (SmC*), cholesteric and cubic blue phases. In addition, with increasing temperature, the selective reflection of light shifted to the long wavelength region at the SmC* phase range and to the short wavelength region at the cholesteric range, respectively. P₁ and P₂ only showed a smectic A (SmA) phase, whereas P₃ and P₄ exhibited the SmC* and SmA phases. All the obtained polymers had very good thermal stability. © 2012 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym Chem, 2012     

Novel Copolymers of Trisubstituted Ethylenes and Styrene. 9. Some Ring-Substituted Ethyl 2-Cyano-1-oxo-3-phenyl-2-propenylcarbamates

Electrophilic trisubstituted ethylenes, ring-substituted ethyl 2-cyano-1-oxo-3-phenyl-2-propenylcarbamates, RC₆H₃CH = C(CN)CONHCO₂C₂H₅(where R is 2-CN, 3-CN, 4-CN, 3-Br- 4-CH₃O, 5-Br-2-CH₃O, 5-Br-2,3-(CH₃O)₂, 5-Br-2,4-(CH₃O)₂), were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and N-cyanoacetylurethane, and characterized by CHN analysis, IR, ¹H- and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H- and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 5-Br-2-CH₃O (3.4) > 5-Br-2,3-(CH₃O)₂ (1.7) > 3-Br- 4-CH₃O (1.4) > 5-Br-2,4-(CH₃O)₂ (0.7) > 4-CN (0.4) > 3-CN (0.4) > 2-CN (0.3). High T _g of the copolymers in comparison with that of polystyrene indicates decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene structural unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in 250–420°C with residue (5–15% wt), which then decomposed in the 420–650°C range.     

The influence of comonomer (2‐hydroxyethyl acrylate) and keto group on photocrosslinking property of arylidene polymers

Two types of arylidene compounds were synthesized by reacting p‐hydroxybenzaldehyde with acetone [1,5‐bis(4‐hydroxyphenyl)penta‐1,4‐dien‐3‐one] (PBHP) and cyclohexanone [2,6‐bis(4‐hydroxybenzylidene)cyclohexanone] (HBC). 1,4‐Pentadien‐3‐one‐1‐p‐hydroxyphenyl‐5‐p‐phenyl methacrylate (PHPPMA) and 4‐{[‐3‐(4‐hydroxybenzylidene)‐2‐oxocyclohexylidene]methyl}phenyl acrylate (HBA) were prepared by reacting PBHP and HBC with methacryloyl chloride and acryloyl chloride in the presence of triethylamine, respectively. Copolymerization of different feed compositions of PHPPMA and HBA with 2‐hydroxyethyl acrylate (HEA) was carried out using a free‐radical solution polymerization technique in ethyl methyl ketone (MEK) using benzoyl peroxide (BPO). All the monomer and polymers were characterized by IR and NMR (¹H/¹³C) spectroscopic techniques. The reactivity ratio of the monomers were obtained using Fineman–Ross (FR), Kelen–Tudos (KT), and extended Kelen–Tudos (exKT) methods. The photocrosslinking properties of the polymers were done using a UV absorption spectroscopy technique. Homopolymers of both the arylidene polymers shows similar trend towards the rate of photocrosslinking. The rate of photocrosslinking was enhanced when the cyclohexanone based arylidene monomer was copolymerized with HEA. Thermal stability and molecular weights (M_w and M_n) of the polymers were determined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3433–3444, 2004     

Novel Copolymers of 4-Fluorostyrene. 9. Some Ring-Disubstituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-disubstituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₃CH=C(CN)₂ (where R = 3-Br-4-CH₃O, 5-Br-2-CH₃O, 2-F-5-CH₃, 2-F-6-CH₃, 3-F-2-CH₃, 3-F-4-CH₃, 4-F-2-CH₃, 4-F-3-CH₃) and 4-fluorostyrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 3-F-4-CH₃(1.64) > 5-Br-2-CH₃O (1.62) > 3-Br-4-CH₃O (1.36) > 4-F-2-CH₃(1.3) > 4-F-3-CH₃(1.26) > 3-F-2-CH₃(1.11) > 2-F-5-CH₃ (0.98) > 2-F-6-CH₃ (0.97). High T_g of the copolymers, in comparison with that of poly(4-fluorostyrene) indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 290–400°C range with residue, which then decomposed in 400–800°C range.     

Novel Copolymers of Trisubstituted Ethylenes and Styrene. 8. Fluoro Ring-Substituted Ethyl 2-Cyano-1-oxo-3-phenyl-2-propenylcarbamates

Electrophilic trisubstituted ethylenes, fluoro ring-substituted ethyl 2-cyano-1-oxo-3-phenyl-2-propenylcarbamates, RC₆H₃CH = C(CN)CONHCO₂C₂H₅(where R is 4-F-3-CH₃, 2-CF₃, 4-CF₃, 2,4-diF, 2,5-diF, 2,6-diF, 3,4-diF, and 3,5-diF), were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and N-cyanoacetylurethane, and characterized by CHN analysis, IR, ¹H- and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H- and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers 4-CF₃ (5.4) > 2,6-diF (2.0) > 2,4-diF (1.7) > 2,5-diF (1.0) > 2-CF₃ (0.8) > 3,4-diF (0.5) > 3,5-diF (0.4) > 4-F-3-CH₃ (0.3). High T _g of the copolymers in comparison with that of polystyrene indicates decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene structural unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in 270–420°C with residue (5–13% wt), which then decomposed in the 420–650°C range.     

Spectroscopic and electrochemical study for evaluating DNA interaction activity of 4‐(3‐halophenyl)‐6‐(pyridin‐2‐yl)pyrimidin‐2‐amine based piano stool Cp* Rh (III) and Ir (III) complexes

Six novel organometallic half sandwich complexes [(η5‐C₅Me₅)M(L^1–3)Cl]Cl.2H₂O were synthesized using [{(η⁵‐C₅Me₅)M(μ‐Cl)Cl₂], where M = Ir (III)/Rh (III) and L^1–3 = three pyridyl pyrimidine based ligands; and characterized by NMR, Infra‐red spectroscopy, conductance, elemental and thermal analysis. The complex‐DNA binding mode and/or strength evaluated using absorption titration, electrochemical studies and hydrodynamic measurement proposed intercalative binding mode, which was also confirmed by molecular docking study. Differential pulse voltammetry and cyclic voltammetry studies indicated an alteration in oxidation and reduction potentials of complexes (M⁺⁴/M⁺³) in presence of CT‐DNA. The metal complexes can cleave plasmid DNA as proposed in gel electrophoretic analysis. The LC₅₀ values of complexes evaluated on brine shrimp suggested their potent cytotoxic nature.