Syntheses, characterization and ethylene polymerization of half-sandwich group IV metal complexes with tridentate [O,N,S] ligands

A series of half-sandwich group IV metal complexes with tridentate monoanionic phenoxy-imine arylsulfide [O NS] ligand [2-Bu t 4-Me-6-((2-(SC 6 H 5)C 6 H 4 N = CHC 6 H 2 O)](La) and dianionic phenoxy-amine arylsulfide [O N S] ligand [2-Bu t 4-Me-6-((2-(SC 6 H 5)C 6 H 4 N-CH 2 C 6 H 2 O)] 2(Lb) have been synthesized and characterized.Lb was obtained easily in high yield by reduction of ligand La with excess LiAlH 4 in cool diethyl ether.Half-sandwich Group IV metal complexes CpTi[O NS]Cl 2(1a),CpZr[O NS]Cl 2(1b),CpTi[O N S]Cl(2a),CpZr[O N S]Cl(2b) and Cp * Zr[O N S]Cl(2c) were synthesized by the reactions of La and Lb with CpTiCl 3,CpZrCl 3 and Cp * ZrCl 3,and characterized by IR,1 H-NMR,13 C-NMR and elemental analysis.In addition,an X-ray structure analysis was performed on ligand Lb.The title Group IV half-sandwich bearing tridentate [O,N,S] ligands show good catalytic activities for ethylene polymerization in the presence of methylaluminoxane(MAO) as co-catalyst up to 1.58 × 10 7 g-PE.mol-Zr 1.h 1.The good catalytic activities can be maintained even at high temperatures such as 100 ℃ exhibiting the excellent thermal stability for these half-sandwich metal pre-catalysts.     

Syntheses, reactions, and ethylene polymerization of half-sandwich titanium complexes containing salicylbenzoxazole and salicylbenzothiazole ligands

Half-sandwich titanium salicylbenzoxazole complexes CpTiLCl(2) 2a-2c [L = R-2-(benzo[d]xazol-2-yl)phenol (R = H (2a), R = 6-CH(3) (2b), R = 4-CH(3)-6-(t)Bu (2c)] and salicylbenzothiazole complexes CpTiLCl(2) 2d-2g [L = R-2-(benzo[d]thiazol-2-yl)phenol (R = H (2d), R = 6-CH(3) (2e), R = 6-(t)Bu (2f), R = 4-Cl (2g)] were synthesized by the reaction of CpTiCl(3) with the sodium salts of their corresponding precursors. Complexes 2a-2g were fully characterized by (1)H and (13)C NMR spectra and elemental analyses. The molecular structures of 2a and 2b were determined by single crystal X-ray diffraction methods. When activated by excess methylaluminoxane (MAO) these half-sandwich titanium complexes showed moderate to high activities for ethylene polymerization and produced high molecular weight polyethylenes. The half-sandwich titanium salicylbenzoxazole complexes (2a-2c) exhibited higher activities, of up to 1.23 × 10(6) g PE mol Ti(-1) h(-1) for the 2b/MAO system, than those of their analogues, half-sandwich titanium salicylbenzothiazole complexes (2d-2g).     

[N,N]-二齿镍配合物催化烯烃聚合

烯烃聚合催化剂的设计是烯烃配位聚合领域的一个核心科学问题,通过设计合成精确结构的催化剂可以有效地调控催化聚合性能以及聚合产物的结构.后过渡金属催化剂由于其易调变性、对聚合产物支化结构的可控性及对极性单体的容忍性,在烯烃聚合领域引起了广泛的关注.本文介绍了近年来本课题组在[N,N]-二齿镍烯烃聚合催化剂设计方面的研究进展,包括四元环的中性脒基镍催化剂、五元环的-二亚胺镍催化剂、2-胺基吡啶和-胺基亚胺系列镍催化剂,以及六元环的-二亚胺和苯胺基亚胺镍催化剂在烯烃聚合的应用.通过优化后过渡金属镍催化剂结构,可成功实施烯烃活性聚合.     

Copolymerization of ethylene with cycloolefins by titanium complexes containing tridentate [o−NSR] ligands

A family of titanium complexes of the general formula [N‐(3,5‐di‐tert‐butylsalicylidene)‐2‐alkylsulfanylanilinato]Ti(IV)Cl₃ 5a – f was prepared from the reaction of TiCl₄ with the potassium salts of the corresponding ligands. These complexes were fully characterized by various spectroscopic techniques and elemental analyses. The molecular structures of 5b and 5e were further confirmed by single‐crystal X‐ray analyses. Complexes 5a – f (except for 5c ) exhibited good to high catalytic activities in ethylene copolymerization with cycloolefins such as norbornene, cyclopentene, dicyclopentadiene in the presence of modified methylaluminoxane. The reaction conditions and the steric hindrance of the alkyl substituents on sulfur atom in the precatalysts influenced strongly the copolymerization behaviors and the structures of the resultant copolymers. Complex 5c with bulky tert‐butylthio sidearm showed both low catalytic activity and comonomer incorporation ratio. The n‐alkylthio complexes 5a , 5d – f all exhibited good ethylene copolymerization capabilities with cycloolefins, which is superior to the corresponding phenylthio complex 5g . © 2008 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 46: 2807–2819, 2008     

Living polymerization of ethylene catalyzed by titanium complexes having fluorine-containing phenoxy-imine chelate ligands

Seven titanium complexes bearing fluorine-containing phenoxy-imine chelate ligands, TiCl(2)[eta(2)-1-[C(H)=NR]-2-O-3-(t)Bu-C(6)H(3)](2) [R = 2,3,4,5,6-pentafluorophenyl (1), R = 2,4,6-trifluorophenyl (2), R = 2,6-difluorophenyl (3), R = 2-fluorophenyl (4), R = 3,4,5-trifluorophenyl (5), R = 3,5-difluorophenyl (6), R = 4-fluorophenyl (7)], were synthesized from the lithium salt of the requisite ligand and TiCl(4) in good yields (22%-76%). X-ray analysis revealed that the complexes 1 and 3 adopt a distorted octahedral structure in which the two phenoxy oxygens are situated in the trans-position while the two imine nitrogens and the two chlorine atoms are located cis to one another, the same spatial disposition as that for the corresponding nonfluorinated complex. Although the Ti-O, Ti-N, and Ti-Cl bond distances for complexes 1 and 3 are very similar to those for the nonfluorinated complex, the bond angles between the ligands (e.g., O-Ti-O, N-Ti-N, and Cl-Ti-Cl) and the Ti-N-C-C torsion angles involving the phenyl on the imine nitrogen are different from those for the nonfluorinated complex, as a result of the introduction of fluorine atoms. Complex 1/methylalumoxane (MAO) catalyst system promoted living ethylene polymerization to produce high molecular weight polyethylenes (M(n) > 400 000) with extremely narrow polydispersities (M(w)/M(n) < 1.20). Very high activities (TOF > 20 000 min(-1) atm(-1)) were observed that are comparable to those of Cp(2)ZrCl(2)/MAO at high polymerization temperatures (25, 50 degrees C). Complexes 2-4, which have a fluorine atom adjacent to the imine nitrogen, behaved as living ethylene polymerization catalysts at 50 degrees C, whereas complexes 5-7, possessing no fluorine adjacent to the imine nitrogen, produced polyethylenes having M(w)/M(n) values of ca. 2 with beta-hydrogen transfer as the main termination pathway. These results together with DFT calculations suggested that the presence of a fluorine atom adjacent to the imine nitrogen is a requirement for the high-temperature living polymerization, and the fluorine of the active species for ethylene polymerization interacts with a beta-hydrogen of a polymer chain, resulting in the prevention of beta-hydrogen transfer. This catalyst system was used for the synthesis of a number of unique block copolymers such as polyethylene-b-poly(ethylene-co-propylene) diblock copolymer and polyethylene-b-poly(ethylene-co-propylene)-b-syndiotactic polypropylene triblock copolymer from ethylene and propylene.     

Highly active ethylene polymerization and regioselective 1-hexene oligomerization using zirconium and titanium catalysts with tridentate [ONO] ligands

A series of tridentate dianionic ligands [4-(t)Bu-6-R-2-(3-R'-5-(t)Bu-2-OC(6)H(2))N=CH C(6)H(2)O](2-) (L) [R = R' = (t)Bu (L1); R = CMe(2)Ph, R' = (t)Bu (L2); R = adamantyl, R' = (t)Bu (L3); R = R' = CMe(2)Ph (L4); R = SiMe(2)(t)Bu, R' = CMe(2)Ph (L5)] were synthesized. Reactions of TiCl(4) with 1 equiv of ligands L1-L5 in toluene afford five-coordinate titanium complexes with general formula LTiCl(2) [L = L1 (1); L2 (2); L3 (3); L4 (4); L5 (5)]. The addition of tetrahydrofuran (THF) to titanium complex 5 readily gives THF-solvated six-coordinate complex 6, which also was obtained by reaction of TiCl(4) with 1 equiv of ligand L5 in THF. Reactions of ZrCl(4) with 1 or 2 equiv of ligands L1-L5 afford six-coordinate zirconium mono(ligand) complexes LZrCl(2)(THF) [L = L2 (7); L4 (8); L5 (9)], and bis(ligand) complexes L(2)Zr [L = L1 (10); L4 (11)]. The molecular structures of complexes 2, 8, and 11 were established by single-crystal X-ray diffraction studies. Upon activation with methylaluminoxane, complexes 1-9 are active for ethylene polymerization. The activities and half-lifes of the catalyst systems based on zirconium complexes are more than 10(6) g of polyethylene (mol Zr)(-1) h(-1) and 6 h, respectively. Complex 9 is more active and long-lived, with a turnover frequency (TOF) of 2.6 × 10(5) (mol C(2)H(4)) (mol Zr)(-1) h(-1), a half-life of >16 h, and a total turnover number (TON) of more than 10(6) (mol C(2)H(4)) (mol Zr)(-1) at 20 °C and 0.5 MPa pressure. Even at 80 °C, complex 9/MAO catalyst system has a long lifetime (t(1/2) > 2 h), as well as high activity that is comparable with that at 20 °C. When activated with methylaluminoxane (MAO), complex 9 also show moderate catalytic activity and more than 99% 2,1-regioselectivity for 1-hexene oligomerization.     

Synthesis, characterization and olefin polymerization of the nickel catalysts supported by [N,S] ligands

The novel nickel (II) complexes (2a, 2b) bearing 1-pyridyl-(3-substituedimidazole-2-thione) ligands were synthesized by the reaction of the corresponding ligands with NiBr₂(DME). 2a and 2b have been characterized by IR, NMR and elemental analysis. The nickel complexes show high catalytic activities for norbornene polymerization in the presence of MAO (methylaluminoxane), although low activities for ethylene polymerization.     

Synthesis, ethylene polymerization and dynamic features of titanium and zirconium complexes bearing chelating malonate-based enaminoketonato ligands

Synthesis of new titanium and zirconium dichloro complexes bearing malonate-based enaminoketonato (N,O) ligand is described. NMR studies of the catalyst precursors reveal that synthesized complexes have different configurational isomers in solution state and that they undergo structural change within NMR timescale. After MAO activation complexes exhibited low to moderate activities in ethylene polymerization producing bi- or multimodal polyethylenes.     

Ruthenium(II) complexes with tetradentate pyridylthioazoimine [N,S,N,N] ligands: Synthesis, crystal structure and spectroscopy

The Ru(II) complexes cis-[Ru(L)Cl₂] (C1-C3) of novel tetradentate NSNN ligands (L) {where L is C₅H₄N-CH₂-S-C₆H₄NC(COCH₃)-NN-C₆H₄X, and X is H (L1), CH₃ (L2) and Br (L3)}, were synthesized and characterized by spectroscopy (IR, UV/vis and NMR), cyclic voltammetry and crystallography. The tetradentate ligands were isolated as the amidrazones H₂L {where H₂L is C₅H₄N-CH₂-S-C₆H₄NH-C(COCH₃)N-NH-C₆H₄X and X is H (H₂L1), CH₃ (H₂L2) and Br (H₂L3)} as shown by crystallography of H₂L1, but oxidize to azoimines during the formation of the Ru(II) complexes. A crystallographic analysis of C1 showed that the Ru(II) centre is in a distorted octahedral coordination sphere in which the tetradentate ligand occupies three equatorial sites and one axial site (two azoimine nitrogens and a thio sulfur in the equatorial plane and an axial pyridine nitrogen) and two chlorides occupying axial and equatorial coordination sites. The Ru(II) oxidation state is greatly stabilized by the novel tetradentate ligand, showing Ru(III/II) couples ranging from 1.43 to 1.51 V. The absorption spectrum of C1 in acetonitrile was modelled by time-dependent density functional theory.     

Synthesis,structure and ethylene polymerization of group 4 complexes with phosphinoamide ligands

Group 4 complexes containing diphosphinoamide ligands [Ph₂PNR]₂MCl₂ (3: R = ^tBu, M = Ti; 4: R = ^tBu, M = Zr; 5: R = Ph, M = Ti; 6: R = Ph, M = Zr) were prepared by the reaction of MCl₄ (M = Ti; Zr) with the corresponding lithium phosphinoamides in ether or THF. The structure of [Ph₂PN^tBu]₂TiCl₂ (3) was determined by X‐ray crystallography. The phosphinoamides functioned as η²‐coordination ligands in the solid state and the Ti? N bond length suggests it is a simple single bond. In the presence of modified methylaluminoxane or i‐Bu₃Al/Ph₃BC(C₆F₅)₄, catalytic activity of up to 59.5 kg PE/mol cat h bar was observed. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis, structure and ethylene polymerization behavior of titanium phosphinoamide complexes

(Phosphinoamide)(cyclopentadienyl)titanium(IV) complexes of the type Cp*TiCl₂(η²-Ph₂PNR) [Cp*=C₅Me₅; R = t-Bu (2a), R = n-Bu (2b), R = Ph (2c)] have been prepared by the reaction of Cp*TiCl₃ with the corresponding lithium phosphinoamides. The structure of Cp*TiCl₂(η²-Ph₂PN^tBu) (2a) and Cp*TiCl₂(η²-Ph₂PNPh) (2c) have been determined by X-ray crystallography. These complexes exhibited moderate catalytic activities for ethylene polymerization in the presence of modified methylaluminoxane (MMAO). Catalytic activity of up to 2.5 × 10⁶ g/(mol Ti h) was observed when activated by i-Bu₃Al/Ph₃CB(C₆F₅)₄.     

Nickel complexes of bidentate [S2] and [SN] borato ligands

Nickel(II) complexes of the monoanionic borato ligands [Ph2B(CH2SCH3)2] (abbreviated Ph2Bt), [Ph2B(CH2S(t)Bu)2] (Ph2Bt(tBu)), [Ph2B(1-pyrazolyl)(CH2SCH3)], and [Ph2B(1-pyrazolyl)(CH2S(t)Bu)] have been prepared and characterized. While [Ph2Bt] formed the square planar homoleptic complex, [Ph2Bt]2Ni, the larger [S2] ligand with tert-butyl substituents, [Ph2BttBu], yielded an unexpected organometallic derivative, [Ph2Bt(tBu)]Ni(eta2-CH2SBut), resulting from B-C bond rupture. The analogous thiametallacycle derived from the [S3] ligand, [PhB(CH2S(t)Bu)3] (PhTt(tBu)), has been structurally authenticated (Schebler, P. J.; Mandimutsira, B. S.; Riordan, C. G.; Liable-Sands, L.; Incarvito, C. D.; Rheingold, A. L. J. Am. Chem. Soc. 2001, 123, 331). The [SN] borato ligands formed exclusively the cis stereoisomers upon reaction with Ni(II) sources, [Ph2B(1-pyrazolyl)(CH2SR)]2Ni. Analysis of the Ni(II/I) reduction potentials by cyclic voltammetry revealed a approximately 600 mV anodic shift upon replacement of two thioether donors ([Ph2Bt]2Ni) with two pyrazolyl donors ([Ph2B(1-pyrazolyl)(CH2SCH3)]2Ni) consistent with the all thioether environment stabilizing the lower oxidation state of nickel.     

Synthesis, structure and ethylene polymerization behavior of zirconium complexes with chelating ketoiminate ligands

Mixed ketoiminate/ketoimine/pentamethylcyclopentadienyl (Cp*) complex of zirconium, [(η⁵-Cp*){CH₃C(O)CHC(NHR)CH₃}{CH₃C(O)CHC(NR)CH₃}ZrCl₂] (R=4-CF₃Ph) (3) has been prepared in high yield by the reaction of one equivalent of 4-CF₃-phenyl-β-ketoimine (1a) and one equivalent of lithium 4-CF₃-phenyl-β-ketoiminate (2a) with one equivalent of Cp*ZrCl₃ in Et₂O. Bis(ketoiminate)zirconium dichloride complexes, 4 and 6, have been also prepared in high yield by the reaction of amine elimination of ketoimine ligands, respectively 1a and 1b, with Zr(NMe₂)₄ and followed by chlorination reaction with TMSCl. The X-ray crystallography reveals that the compound 3 is based on distorted octahedral geometry containing a ketoimine and a ketoiminate. The ketoiminate ligand coordinates to the zirconium as a bidentate ligand, leaving the metal center coordinatively unsaturated and thus leading to an additional binding of a ketoimine ligand to the metal to stabilize the complex 3. The zirconium complexes 3, 4 and 6 provide the moderate activity for the polymerization of ethylene in the presence of MMAO cocatalyst. Low molecular weight and high density polyethylene was obtained.     

The synthesis,structure, and ethylene polymerization of dimeric salicylaldiminato titanium complexes

A series of dimeric titanium complexes bearing salicylaldiminates, [4-R-6-^tBu-2-(CH=NⁿBu)C₆H₂OTiCl₂(µ-Cl)]₂ [R?=?H (1); R?=?^tBu (2); R?=?NO₂ (3)], have been synthesized in high yield (>90%) by the reaction of corresponding 4-R-6-^tBu-2-(CH=NⁿBu)C₆H₂OSiMe₃ with TiCl₄. The molecular structure of 2 has been confirmed by single-crystal X-ray diffraction analysis. When activated with methylaluminoxane, these complexes exhibit good catalytic activity for ethylene polymerization.     

Titanium isopropoxide complexes of a series of sterically demanding aryloxo based [N2O2]2- ligands as precatalysts for ethylene polymerization

Several titanium isopropoxide complexes [N,N'-bis(2-oxo-3-R(1)-5-R(2)-phenylmethyl)-N,N'-bis(methylene-p-R(3)-C(6)H(4))-ethylenediamine]Ti(O(i)Pr)(2) [R(1) = t-Bu, R(2) = Me, R(3) = H (1b); R(1) = R(2) = t-Bu, R(3) = H, (2b); R(1) = R(2) = Cl, R(3) = H, (3b), R(1) = t-Bu, R(2) = Me, R(3) = Cl (4b); R(1) = R(2) = t-Bu, R(3) = Cl, (5b); R(1) = R(2) = R(3) = Cl, (6b)] supported over sterically demanding aryloxy based [N(2)O(2)]H(2) ligands have been designed as precatalysts for the ethylene polymerization. Specifically, the 1b-6b complexes, when treated with methylaluminoxane (MAO) under 88 ± 0.5 psi of ethylene at 30 °C for 3 h, produced polyethylene polymers of high molecular weight (M(w) = ca. 7.2-8.3 × 10(5) g mol(-1)) having broad molecular weight distribution (PDI = ca. 13.1-14.6). The 1b-6b complexes were conveniently synthesized from the direct reaction of the [N(2)O(2)]H(2) ligands, 1a-6a, with Ti(O(i)Pr)(4) in 69-86% yield.     

苯基取代的环戊二烯基锆化合物的合成及催化乙烯聚合

一系列苯基取代的环戊二烯配体在甲苯中相继与丁基锂及ZrCl4作用，生成相 应的苯基取代的茂金属化合物，通过^1H NMR，MS和元素分析表征了化合物的分子 结构，并研究了在MAO（甲基铝氧烷的助催化下，化合物对乙烯聚合的催化性能， 结果发现单苯基取代茂金属化合物的催化活性和产物聚乙聚的分子量都随聚合温度 的升高而增大。     

Oxidomolybdenum(VI) complexes with atrane-type [O3N] ligands

Dioxomolybdenum(VI) complex [MoO₂Cl₂(dmso)₂] reacts with a series of tetradentate O₃N-type aminoalcohol–bisphenol ligands to form oxomolybdenum(VI) complexes of type [MoOCl(Lⁿ)]. The reaction of H₃L¹ produces [MoOCl(L¹)] as two separable isomers, whereas the reaction of H₃L² or H₃L³ yields a single product. The X-ray analyses of cis- and trans-[MoOCl(L¹)] reveal that the complexes are formed of monomeric molecules. The ligands have tetradentate coordination through three oxygen donors and one nitrogen donor, which is located trans to the terminal oxo group. The sixth coordination site is occupied by a chloro ligand.     

Titanium complexes with novel triaryl-substituted phosphinimide ligands: Synthesis, structure and ethylene polymerization behavior

A series of titanium phosphinimide complexes [Ph₂P(2-RO-C₆H₄)]₂TiCl₂ (7, R = CH₃; 8, R = CHMe₂) and [PhP(2-Me₂CHO-C₆H₄)][THF]TiCl₃ (9) have been prepared by reaction of TiCl₄ with the corresponding phosphinimines under dehalosilylation. The structure of complex 9 has been determined by X-ray crystallography, and a solvent molecule THF was found to be coordinated with the central metal and the Ti-O bond was consistent with the normal Ti-O (donor) bond length. The complexes 7 and 8 displayed inactive to ethylene polymerization, and the complex 9 displayed moderate activity in the presence of modified methylaluminoxane (MMAO) or i-Bu₃Al/Ph₃CB(C₆F₅)₄, and this should be partly attributed to coordination of THF with titanium and the steric effect of two iso-propoxyl. And catalytic activity up to 32.2 kg-PE/(mol-Ti h bar) was observed.