Organo-modified cationic silica nanoparticles/anionic polymer as flocculants

The synthesis of quaternized silica nanoparticles and its application to fine clay flocculation were investigated. N-trimethoxysilylpropyl-N,N,N-trimethylammonium chloride was used as a cationic reagent to introduce quaternary amine groups onto the surfaces of silica nanoparticles via the formation of covalent bonds between the methoxy groups of the cationic reagents and the silanol groups in the silica surface. The zeta potential, zeta, and charge density of the silica particles modified under various reaction conditions were determined. Dynamic clay flocculation experiments using a photometric dispersion analyzer (PDA) showed that the cationic silica alone contributed little to the flocculation. However, the cationic silica, in conjunction with an anionic polymer of high M(w) and low charge density, led to a significant improvement in the flocculation of fine clay particles. The mechanism of flocculation was explored by a systematic investigation of interaction between cationic silica and anionic polymers as well as of their adsorption behavior on clay surfaces. The influence of factors such as pH and electrolyte concentration on clay flocculation was also investigated.     

Fabrication of poly(ethylene glycol)‐based hydrogels entrapping enzyme‐immobilized silica nanoparticles

In this study, we immobilized enzymes by combining covalent surface immobilization and hydrogel entrapment. A model enzyme, glucose oxidase (GOX), was first covalently immobilized on the surface of silica nanoparticles (SNPs) via 3‐aminopropyltriethoxysilane (APTES), and the resultant SNP‐immobilized enzyme was physically entrapped within photopolymerized hydrogels prepared from two different molecular weights (MWs) (575 and 8000 Da) of poly(ethylene glycol)(PEG). The hydrogel entrapment resulted in a decrease in reaction rate and an increase in apparent K_m of SNP‐immobilized GOX, but these negative effects could be minimized by using hydrogel with a higher MW PEG, which provides higher water content and larger mesh size. The catalytic rate of the PEG 8000 hydrogel was about ten times faster than that of the PEG 575 hydrogel because of enhanced mass transfer. Long‐term stability test demonstrated that SNP‐immobilized GOX entrapped within hydrogel maintained more than 60% of its initial activity after a week, whereas non‐entrapped SNP‐immobilized GOX and entrapped GOX without SNP immobilization maintained less than 20% of their initial activity. Incorporation of SNPs into hydrogel enhanced the mechanical strength of the hydrogel six‐fold relative to bare hydrogels. Finally, a hydrogel microarray entrapping SNP‐immobilized GOX was fabricated using photolithography and successfully used for quantitative glucose detection. Copyright © 2009 John Wiley & Sons, Ltd.     

Encapsulation of silica nanoparticles by redox-initiated graft polymerization from the surface of silica nanoparticles

This study describes a facile and versatile method for preparing polymer-encapsulated silica particles by ‘grafting from’ polymerization initiated by a redox system comprising ceric ion (Ce⁴⁺) as an oxidant and an organic reductant immobilized on the surface of silica nanoparticles. The silica nanoparticles were firstly modified by 3-aminopropyltriethoxysilane, then reacted with poly(ethylene glycol) acrylate through the Michael addition reaction, so that hydroxyl-terminated poly(ethylene glycol) (PEG) were covalently attached onto the nanoparticle surface and worked as the reductant. Poly(methyl methacrylate) (PMMA), a common hydrophobic polymer, and poly(N-isopropylacrylamide) (PNIPAAm), a thermosensitive polymer, were successfully grafted onto the surface of silica nanoparticles by ‘grafting from’ polymerization initiated by the redox reaction of Ce⁴⁺ with PEG on the silica surface in acid aqueous solutions. The polymer-encapsulated silica nanoparticles (referred to as silica@PMMA and silica@PNIPAAm, respectively) were characterized by infrared spectroscopy, thermogravimetric analysis, and transmission electron microscopy. On the contrary, graft polymerization did not occur on bare silica nanoparticles. In addition, during polymerization, sediments were observed for PMMA and for PNIPAAm at a polymerization temperature above its low critical solution temperature (LCST). But the silica@PNIPAAm particles obtained at a polymerization temperature below the LCST can suspend stably in water throughout the polymerization process.     

Controlled nucleation and growth of CdS nanoparticles in a polymer matrix

In-situ synchrotron X-ray diffraction (XRD) was used to monitor the thermal decomposition (thermolysis) of Cd thiolates precursors embedded in a polymer matrix and the nucleation of CdS nanoparticles. A thiolate precursor/polymer solid foil was heated to 300 degrees C in the X-ray diffraction setup of beamline W1.1 at Hasylab, and the diffraction curves were each recorded at 10 degrees C. At temperatures above 240 degrees C, the precursor decomposition is complete and CdS nanoparticles grow within the polymer matrix forming a nanocomposite with interesting optical properties. The nanoparticle structural properties (size and crystal structure) depend on the annealing temperature. Transmission electron microscopy (TEM) and photoluminescence (PL) analyses were used to characterize the nanoparticles. A possible mechanism driving the structural transformation of the precursor is inferred from the diffraction features arising at the different temperatures.     

Thermally stable polymer composites with improved transparency by using colloidal mesoporous silica nanoparticles as inorganic fillers

The colloidal mesoporous silica nanoparticles with small particle sizes (namely, CMS) are used as inorganic fillers of polymers (i.e. epoxy and silicone). From simple calculation, almost all polymers are estimated to be confined in the mesopores. To clarify the superiority of CMS over nonporous silica particles and mesoporous silica particles with much larger size (TMPS-4) as inorganic fillers, a systematic study on mechanical strength and transparency of polymer-silica nanocomposites was conducted. Compared with nonporous silica particles, similar to TMPS-4, CMS shows a greater effect on lowering the CTE. In addition, obtained polymer-CMS nanocomposites show improved transparency than polymer-TMPS-4 nanocomposites.     

Mesoporous silica reinforced by silica nanoparticles to enhance mechanical performance

Silica nanoparticle/mesoporous silica composite films were prepared by direct mixing with mechanical stirring and thermal imidization. The structural morphology was elucidated by scanning electron microscopy and the surface of the film was imaged by atomic force microscopy. The functional groups and desorption process of the films were elucidated by Fourier transform infrared spectroscopy and thermal desorption spectroscopy. The mechanical properties were investigated using a nanoindenter system. The gel matrix and the filler are very compatible because they have similar molecular content. The composite films had a higher mechanical strength than pure porous silica film. Their strength is related to the silica nanoparticle content. The interfacial compatibility, dispersion effect, and interfacial strength also affect the mechanical strength of composite films.     

Encapsulation of silica nanoparticles by miniemulsion polymerization

Hybrid silica/polystyrene nanoparticles were synthesized by miniemulsion polymerization. With the objective to prepare core‐shell hybrid nanoparticles having narrow particle size distributions (PSDs) as well as a high degree of silica encapsulation, the effect of adding surface modifiers, the size of silica nanoparticles, the ratio styrene/silica, the surfactant concentration, and the presence of ethanol in the reaction mixture were studied. A synergistic effect was observed using oleic acid (OA) together with 3‐(trimethoxysilyl)propyl methacrylate (TPM) in the compatibilization step between the organic phase (monomer) and inorganic nanoparticles (silica). Mono and multinuclear eccentric core‐shell hybrid nanoparticles were obtained. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 935–948, 2009     

Reduction of polymer surface tension by crystallized polymer nanoparticles

Self-consistent field theory is applied to investigate the effects of crystallized polymer nanoparticles on polymer surface tension. It is predicted that the nanoparticles locate preferentially at the polymer surface and significantly reduce the surface tension, in agreement with experiment. In addition to the reduction of surface tension, the width of the polymer surface is found to narrow. The reduced width and surface tension are due to the smaller spatial extent of the nanoparticles compared to the polymer. This allows the interface to become less diffuse and so reduces the energies of interaction at the surface, which lowers the surface tension. The solubility of the surrounding solvent phase into the polymer melt is mostly unchanged, a very slight decrease being detectable. The solubility is constant because away from the interface, the system is homogeneous and the replacement of polymer with nanoparticles has little effect.     

Facile strategy for synthesis of silica/polymer hybrid hollow nanoparticles with channels

The silica/polymer hybrid hollow nanoparticles with channels and gatekeepers were successfully fabricated with a facile strategy by using thermoresponsive complex micelles of poly(ethylene glycol)-b-poly(N-isopropylacrylamide) (PEG-b-PNIPAM) and poly(N-isopropylacrylamide)-b-poly(4-vinylpyridine) (PNIPAM-b-P4VP) as the template. In aqueous solution, the complex micelles (PEG-b-PNIPAM/PNIPAM-b-P4VP) formed with the PNIPAM block as the core and the PEG/P4VP blocks as the mixed shell at 45 °C and pH 4.0. After shell cross-linking by 1,2-bis(2-iodoethoxyl)ethane (BIEE), tetraethylorthosilicate (TEOS) selectively well-deposited on the P4VP block and processed the sol-gel reaction. When the temperature was decreased to 4 °C, the PNIPAM block became swollen and further soluble, and the PEG-b-PNIPAM block copolymer escaped from the hybrid nanoparticles as a result of swelled PNIPAM and weak interaction between PEG and silica at pH 4.0. Therefore, the hybrid hollow silica nanoparticles with inner thermoresponsive PNIPAM as gatekeepers and channels in the silica shell were successfully obtained, which could be used for switchable controlled drug release. In the system, the complex micelles, as a template, could avoid the formation of larger aggregates during the preparation of the hybrid hollow silica nanoparticles. The thermoresponsive core (PNIPAM) could conveniently control the hollow space through the stimuli-responsive phase transition instead of calcination or chemical etching. In the meantime, the channel in the hybrid silica shell could be achieved because of the escape of PEG chains from the hybrid nanoparticles.     

Preparation of nanocomposites consisting of an epoxyamine polymer matrix with silver nanoparticles

A promising method is presented for the preparation of polymer composites in situ containing stabilized silver nanoparticles without the use of additional reducing systems. The effects of functionality and the structure of the epoxyamine polymer matrices on their capacity to reduce silver ions and stabilize growing silver nanoparticles were evaluated.     

Controlled production of ZnO nanoparticles from zinc glycerolate in a sol-gel silica matrix

The controlled production of ZnO nanoparticles within an amorphous silica matrix is achieved using a new methodology consisting of four stages. First, precursor zinc glycerolate nanoparticles are produced within reversed micelles of glycerol in heptane stabilized by the surfactant Aerosol-OT (bis-ethylhexyl sodium sulfosuccinate, AOT). The surface of these nanoparticles is then modified by exchanging AOT with bis-trimethoxysilyl-ethane (BTME). The surface-modified nanoparticles are copolymerized with tetramethoxysilane (TMOS) to provide a composite silica material, in which the nanoparticles are apparently dissolved, producing a uniform distribution of zinc in the silica matrix. Finally, the conversion of zinc to ZnO is achieved by heating the material at 700 degrees C, leading to a uniform dispersion of very small (<10 nm) ZnO particles within the amorphous matrix. The fluorescence spectrum of the ZnO particles within the matrix is blue-shifted, as expected from the strong quantum confinement achieved. The properties of the system at all stages in this synthetic process are monitored using TEM, XRD, fluorescence and FT-IR spectroscopy. Glycerol forms complexes with many metal ions, so the present procedure may be generalized to provide uniform distributions of metal ions and subsequently metal oxide nanoparticles in amorphous silica.     

Self-assembled Nafion–silica nanoparticles for elevated-high temperature polymer electrolyte membrane fuel cells

In this paper, a novel Nafion/SiO₂ nanocomposite membrane based on the self-assembled Nafion–SiO₂ nanoparticles was developed. The average particle size of Nafion–SiO₂ nanoparticles prepared by self-assembly process was 2.8 ± 0.5 nm. The self-assembled Nafion–SiO₂ nanoparticles significantly enhance the durability of the Nafion/silica nanocomposite membrane as compared to that of conventional Nafion/silica composite and Nafion 212 membranes under wet/dry cyclic tests at 90 °C. With an addition of 5 wt% self-assembled Nafion–SiO₂ nanoparticles, the Nafion/SiO₂ nanocomposite membrane shows a significantly improved performance stability at cell/humidifying temperatures of 100 °C/60 °C under a current density of 600 mA/cm², and the degradation rate is 0.12 mV/min, almost 20 times lower than 2.33 mV/min measured on the pristine Nafion 212 membrane under the same conditions. The present results demonstrate the promises of the self-assembled Nafion/SiO₂ nanocomposite membrane for elevated-high temperature PEM fuel cells applications.     

Dye-sensitized nanocrystalline solar cells based on composite polymer electrolytes containing fumed silica nanoparticles

We report remarkably high energy conversion efficiency (4.5% at 100 mW cm(-2)) of a dye-sensitized solar cell in the solid state, using composite polymer electrolytes containing fumed silica nanoparticles.     

Detection of TNT based on conjugated polymer encapsulated in mesoporous silica nanoparticles through FRET

Amine-functionalized mesoporous silica nanoparticles containing poly(p-phenylenevinylene) provide a facile strategy to detect TNT through fluorescence resonance energy transfer (FRET). The observed linear fluorescence intensity change allows the quantitative detection of TNT with the detection limit of 6 × 10(-7) M.     

Strategy for preparation of hybrid polymer hydrogels using silica nanoparticles as multifunctional crosslinking points

Novel hybrid polymer hydrogels were prepared in a facile manner by simple mixing of a water-soluble copolymer having trimethoxysilyl side chains with silica nanoparticles used as multiple crosslinkers.     

The flow-through silica as the matrix to immobilize gold nanoparticles for HPLC applications

In the present study, the flow-through silica, featured with hierarchical pores, i.e., tunable mesopores and penetrable macropores, was attempted as the chromatographic stationary phase matrix to immobilize gold nanoparticles (AuNPs). It was first modified by mercapto groups (named as SiO₂-SH), and then by AuNPs (named as SiO₂-S-Au). Thanks to the characteristic macropores, the column backpressure of SiO₂-S-Au was comparable to SiO₂-SH, which effectively overcame the difficulty of high column backpressure upon the nanoparticles were introduced to the chromatographic matrix. Both the reversed-phase and hydrophilic interaction liquid chromatographic performance were observed on these two columns but with different selectivities. Hydrophobic, hydrophilic, hydrogen bond and electrostatic interactions between the SiO₂-S-Au stationary phase and analytes could contribute to the retention. The SiO₂-S-Au column showed excellent aqueous compatibility by “Stop-flow” test with the relative standard deviations (RSD) of analyte’s k (capacity factor) values from 0.59% to 2.88%. The reproducibility of SiO₂-S-Au was acceptable with RSDs of analyte’s k values in the range of 3.13%-5.03%. In addition, compared with the SiO₂-SH column, the SiO₂-S-Au column had better separation performance and selectivity. The results demonstrated that the flow-through silica was a promising matrix for nanoparticles with low backpressure and different selectivities.     

Lignosulfonate/silica hybrid nanoparticles as a novel biobased filler in polybenzoxazine matrix

Lignin is an abundant and sustainable resource that exhibits numerous attractive functional properties as a reinforcing agent for benzoxazine-based composites, due to its stiffness, thermal stability, and high carbon content. However, the low quality of lignin particles dispersions associated with the weak particles-matrix interactions reduces the reinforcement capability. In this work, hybrid lignin/silica (NaLS/SiO₂) nanoparticles were obtained from sodium lignosulfonate (NaLS) and tetraethylorthosilicate (TEOS) under basic conditions. The particles were characterized by transmission electron microscopy (TEM) confirming their spherical morphology and narrow nanometric-size distributions. The hybrid particles were incorporated into conventional benzoxazine (BA-a) and a difuran biobased benzoxazine (SA-dfda) to prepare nanocomposites with different mass compositions (3, 5, and 10 wt%). Morphological, mechanical, dynamo-mechanical, and thermal properties of the obtained composites were assessed. All the materials exhibited a homogenous filler dispersion that contributed to improve the reinforcement properties. Hybrid nanoparticles proved to be an interesting alternative as a filler in the benzoxazine matrix to prepare high-performance thermosetting composites.     

Structural characterization study of FeCo alloy nanoparticles in a highly porous aerogel silica matrix

A series of FeCo-SiO(2) nanocomposite aerogels having different FeCo loadings of 3, 5, and 8 wt % were prepared using a novel urea-assisted sol-gel route. The size of the nanoparticles, which was estimated using Scherrer analysis of the main peak of the x-ray diffraction pattern, varies from 3 to 8 nm. X-ray absorption fine structure (EXAFS) and x-ray absorption near edge structure (XANES) techniques at both Fe and Co K edges were used to investigate the structure of the FeCo nanoparticles. EXAFS and XANES show that FeCo nanoparticles have the typical bcc structure. Evidence of oxidation was observed in low FeCo content aerogels. Spatially resolved electron energy loss spectroscopy analysis suggests the formation of a passivation layer of predominantly iron oxide.