Syntheses of rod-shaped fluorescent 1,3,2-benzodiazaboroles with phosphonium, and phosphane chalcogenide acceptor functions

A series of 1,4-phenylenes X-C(6)H(4)-BDB with a 1,3,2-benzodiazaborolyl (BDB) and a phosphorus based end group [X = PPh(2) (2), P(O)Ph(2) (3), P(S)Ph(2) (4), P(Se)Ph(2) (5), P(AuCl)Ph(2) (6) and P(Me)Ph(2) (7)] as well as 2-(2')thienyl-1,3,2-benzodiazaboroles with a second end group X [X = PPh(2) (8), P(S)Ph(2) (9), P(Se)Ph(2) (10) and P(Me)Ph(2) (11)] in the 5' position were synthesised using established methodologies. Molecular structures of 2-9 and 11 were determined by X-ray diffraction. Compounds 3, 4, 6, 7, 9 and 11 show intense blue luminescence in cyclohexane, toluene, chloroform, dichloromethane and tetrahydrofuran with pronounced solvatochromism. Thereby Stokes shifts in the range of 8950-10?440 cm(-1) and quantum yields up to 0.70 were observed in dichloromethane solutions. In contrast to this, for the selenides 5 and 10 quantum yields are small (<0.1). The absorption maxima (298-340 nm) are well reproduced by TD-DFT computations (B3LYB/G-311G(d,p)) and arise from strong HOMO-LUMO transitions. With the exception of 5 and 10 the HOMOs of the molecules under study are mainly located on the benzodiazaborole group. In 5 and 10 the HOMOs are on the selenium atoms. The LUMOs of all new neutral molecules are mainly represented by the phenylene or thiophene bridge. In the phosphonium cations the LUMOs have additional contributions from the phosphonium unit.     

Experimental and theoretical studies on organic D-π-A systems containing three-coordinate boron moieties as both π-donor and π-acceptor

Four linear π-conjugated systems with 1,3-diethyl-1,3,2-benzodiazaborolyl [C(6)H(4)(NEt)(2)B] as a π-donor at one end and dimesitylboryl (BMes(2)) as a π-acceptor at the other end were synthesized. These unusual push-pull systems contain phenylene (-1,4-C(6)H(4)-; 1), biphenylene (-4,4'-(1,1'-C(6)H(4))(2)-; 2), thiophene (-2,5-C(4)H(2)S-; 3), and dithiophene (-5,5'-(2,2'-C(4)H(2)S)(2)-; 4) as π-conjugated bridges and different types of three-coordinate boron moieties serving as both π-donor and π-acceptor. Molecular structures of 2, 3, and 4 were determined by single-crystal X-ray diffraction. Photophysical studies on these systems reveal blue-green fluorescence in all compounds. The Stokes shifts for 1, 2, and 3 are notably large at 7820-9760 cm(-1) in THF and 5430-6210 cm(-1) in cyclohexane, whereas the Stokes shift for 4 is significantly smaller at 5510 cm(-1) in THF and 2450 cm(-1) in cyclohexane. Calculations on model systems 1'-4' show the HOMO to be mainly diazaborolyl in character and the LUMO to be dominated by the empty p orbital at the boron atom of the BMes(2) group. However, there are considerable dithiophene bridge contributions to both orbitals in 4'. From the experimental data and MO calculations, the π-electron-donating strength of the 1,3-diethyl-1,3,2-benzodiazaborolyl group was found to lie between that of methoxy and dimethylamino groups. TD-DFT calculations on 1'-4', using B3LYP and CAM-B3LYP functionals, provide insight into the absorption and emission processes. B3LYP predicts that both the absorption and emission processes have strong charge-transfer character. CAM-B3LYP which, unlike B3LYP, contains the physics necessary to describe charge-transfer excitations, predicts only a limited amount of charge transfer upon absorption, but somewhat more upon emission. The excited-state (S(1)) geometries show the borolyl group to be significantly altered compared to the ground-state (S(0)) geometries. This borolyl group reorganization in the excited state is believed to be responsible for the large Stokes shifts in organic systems containing benzodiazaborolyl groups in these and related compounds.     

Dipole active vibrations and dipole moments of N2 and O2 physisorbed on a metal surface

We have, in infrared reflection absorption measurements, observed narrow dipole active absorption lines associated with the fundamental internal vibrational transitions of N(2) and O(2) physisorbed at 30 K on the chemically inert Pt(111)(1 x 1)H surface. Such transitions are forbidden for free homonuclear molecules and become dipole active at a metal surface due to polarization induced surface dipole moments. The measurements show that the internal stretch vibration frequencies are lowered by 7-8 cm(-1) relative to the gas phase values. The measured static and dynamic dipole moments are in the ranges of 0.06-0.07 and 0.001-0.002 D, respectively. We find that good estimates of the induced dynamic as well as the static dipole moments can in general be obtained from a van der Waals model but that the ratios of the measured static and dynamic moments indicates a need for a refinement of the dipole moment function.     

脯氨酸的构象及性质

用X3LYP法在6-311++G(d, p)和6-311++G(3df, 3pd)基组水平上对脯氨酸15种构象的几何结构、相对能量、电子结构、红外光谱、偶极矩、极化率等性质进行了研究, 并与PBE1PBE/6-311++G(d, p)的结果和文献相比较, 从而得到: (1) 的脯氨酸的15种构象中能量最低的有4种, 不同构象中存在着强弱不同的5种氢键, 其中以N…H—O氢键最强, 并存在特殊的C—H…O=C氢键. 两种方法计算的几何结构数据相近, 均与实验值吻合; (2) 在构象相对能差计算方面, X3LYP具有明显的优势, 用中等基组就可以得到与高水平从头算法和大基组相同的结果, 而PBE1PBE法计算的相对能值则相差较大; (3) 脯氨酸不同构象中偶极矩最大和极化率最小的是最稳定的构象1和2, 两种方法计算的结果一致.     

Symmetry-adapted-cluster configuration interaction study of the doublet states of HCl+: potential energy curves, dipole moments, and transition dipole moments

The electronic structure of the HCl(+) molecular ion has been calculated using the general-R symmetry-adapted-cluster configuration interaction (SAC-CI) method. The authors present the potential energy curves, dipole moments, and transition dipole moments for a series of doublet states. The data are compared with the previous CASSCF and MCSCF calculations. The SAC-CI results reproduce quite well the data available in literature and extend the knowledge on the HCl(+) electronic structure for several higher states. The calculated R-dependent behavior of both dipole moments and transition dipole moments for a series of bound and unbound states reveals an intricate dissociation process at intermediate distances (R>R(e)). The pronounced maxima in transition dipole moment (TDM) describing transitions into high electronic states (X (2)Pi-->3 (2)Pi, X (2)Pi-->3 (2)Sigma, 2 (2)Pi-->3 (2)Pi, 3 (2)Pi-->4 (2)Pi) occur at different interatomic separations. Such TDM features are promising for selection of excitation pathways and, consequently, for an optimal control of the dissociation products.     

Conformational analysis of 1,3,2-dioxaphospholan-yl and 4,5-benzo-1,3,2-dioxaphosphol-2-yl 2,2,2-trifluoroacetate

Conformational analysis of 1,3,2-dioxaphospholan-2-yl 2,2,2-trifluoroacetate and 4,5-benzo-1,3,2-dioxaphosphol-2-yl 2,2,2-trifluoroacetate was carried out using the method of dipole moments and quantumchemical calculations (DFT B3LYP/6-31G*). Both compounds are found to exist as an axial conformer with preferably syn arrangement of the carbonyl group and the lone electron pair.     

Effects of solvent on the electronic absorption and fluorescence spectra of quinazolines,and determination of their ground and excited singlet-state dipole moments

The electronic absorption, and fluorescence excitation and emission spectra of 11 quinazolines have been measured at room temperature (298 K) in several solvents of different polarities (cyclohexane, dioxane, ethylether, chloroform, ethylacetate, 1-butanol, 2-propanol, ethanol, methanol, acetonitrile, dimethylformamide and dimethyl sulfoxide). The effects of the solvent upon the spectral properties are discussed. Experimental ground-state dipole moments were measured for quinazolines and were used in combination with the spectral results to evaluate their first excited singlet-state dipole moments by means of the solvatochromic shift method. The theoretical ground and excited singlet-state dipole moments for selected quinazolines were calculated as a vector sum of the π-component (obtained by the PPP method) and the σ-component (obtained from σ-bond moments). A reasonable agreement was observed between the experimental and the theoretical values. Excited singlet-state dipole moments are higher than the ground-state values for most quinazolines.     

Quantum theory of atoms in molecules charge-charge flux-dipole flux models for the infrared intensities of X(2)CY (X = H, F, Cl; Y = O, S) molecules

The molecular dipole moments, their derivatives, and the fundamental IR intensities of the X2CY (X = H, F, Cl; Y = O, S) molecules are determined from QTAIM atomic charges and dipoles and their fluxes at the MP2/6-311++G(3d,3p) level. Root-mean-square errors of +/-0.03 D and +/-1.4 km mol(-1) are found for the molecular dipole moments and fundamental IR intensities calculated using quantum theory of atoms in molecules (QTAIM) parameters when compared with those obtained directly from the MP2/6-311++G(3d,3p) calculations and +/-0.05 D and 51.2 km mol(-1) when compared with the experimental values. Charge (C), charge flux (CF), and dipole flux (DF) contributions are reported for all the normal vibrations of these molecules. A large negative correlation coefficient of -0.83 is calculated between the charge flux and dipole flux contributions and indicates that electronic charge transfer from one side of the molecule to the other during vibrations is accompanied by a relaxation effect with electron density polarization in the opposite direction. The characteristic substituent effect that has been observed for experimental infrared intensity parameters and core electron ionization energies has been applied to the CCFDF/QTAIM parameters of F2CO, Cl2CO, F2CS, and Cl2CS. The individual atomic charge, atomic charge flux, and atomic dipole flux contributions are seen to obey the characteristic substituent effect equation just as accurately as the total dipole moment derivative. The CH, CF, and CCl stretching normal modes of these molecules are shown to have characteristic sets of charge, charge flux, and dipole flux contributions.     

Triplet state dipole moments of aminobenzonitriles

The triplet state dipole moments mu(T) of a series of 4-amino- and 3-aminobenzonitriles in cyclohexane, benzene, and 1,4-dioxane are recalculated from previously published [J. Phys. Chem. 1992, 96, 10809] time-resolved microwave conductivity data, on the basis of newly measured intersystem crossing yields. For 4-(dimethylamino)benzonitrile (DMABN), the following values are now determined for mu(T): 8.3 D (cyclohexane), 8.9 D (benzene), and 9.7 D (1,4-dioxane), as compared with the previously reported dipole moment of 12 D for the first and the last solvent. With the other aminobenzonitriles, similar mu(T) data are obtained, between 6.9 D for 4-aminobenzonitrile (ABN) in n-hexane and 10.0 D for 4-(di-n-decylamino)benzonitrile (DDABN) in 1,4-dioxane. The increase of mu(T) observed for all aminobenzonitriles when going from cyclohexane via benzene to 1,4-dioxane may indicate that their triplet dipole moments become larger with increasing solvent polarity. The present mu(T) of DMABN, between 8.3 and 9.7 D, although larger than the ground state dipole moment mu(0) of 6.6 D, is somewhat smaller than that of the locally excited (LE) state (9.9 D) but considerably smaller than the dipole moment of the intramolecular charge transfer (ICT) state (17 D). By comparing these mu(X) data with the frequency (CN) of the cyano vibration in each state, it appears that at least for DMABN in the triplet state (CN) is not a reliable indication of the extent of charge transfer as compared with the other states S0, LE, and ICT.     

Study of the electronic spectra of 2-fluoro-5-chloropyridine and determination of the excited state dipole moment

The ultraviolet absorption spectrum in the region 300-190 nm in the vapour phase and in solution in different solvents, and the luminescence emission spectra in ethanol and cyclohexane at 77 K have been measured for 2-fluoro-5-chloropyridine and analysed. The molecule shows two systems of absorption bands corresponding to the π→π* transition II and π→π* transition III. The oscillator strength of the two systems of absorption bands in solutions and the excited state dipole moment in the ¹π, π* state have been determined. The half-life of phosphorescence in cyclohexane is measured and found to be 3·6 s.     

A comparative analysis of the UV/Vis absorption spectra of nitrobenzaldehydes

In a joint experimental and theoretical study, the UV/Vis absorption spectra of the three isomers (ortho, meta, para) of nitrobenzaldehyde (NBA) were analyzed. Absorption spectra are reported for NBA vapors, cyclohexane and acetonitrile solutions. All spectra are poor in vibronic structure and hardly affected in shape by the surroundings (vapor or solution). Moderate solvatochromic shifts of ～ -0.2 eV are measured. For all isomers vertical transition energies, oscillator strengths, and excited state dipole moments were computed using the MS-CASPT2/CASSCF and CC2 methods. Based on these calculations the experimental transitions were assigned. The spectra of all isomers are characterized by weak (ε(max) ≈ 100 M(-1) cm(-1)) transitions around 350 nm (3.6 eV), arising from nπ* absorptions starting from the lone pairs of the nitro and aldehyde moieties. The next band of intermediate intensity peaking around 300 nm (4.2 eV, ε(max) ≈ 1000 M(-1) cm(-1)) is dominated by ππ* excitations within the arene function. Finally, strong absorptions (ε(max) ≈ 10,000 M(-1) cm(-1)) were observed around 250 nm (5.0 eV) which we ascribe to ππ* excitations involving the nitro and benzene groups.     

Luminescence Properties of Platinum(II) Dithiooxamide Compounds

Tight contact ion pairs of general formula {Pt(H(2)-R(2)-dto)(2)(2+),(X(-))(2)} have been prepared, and their absorption spectra and luminescence properties (at room temperature in dichloromethane fluid solution and at 77 K in butyronitrile rigid matrix) have been studied (dto = dithiooxamide; R = methyl, X = Cl (1); R = butyl, X = Cl (2); R = benzyl, X = Cl (3); R = cyclohexyl, X = Cl (4); R = cyclohexyl, X = Br (5); R = cyclohexyl, X = I (6)). The absorption spectra of all the compounds are dominated by moderately strong Pt(dpi)/S(p) to dithiooxamide (pi) charge transfer (Pt/S --> dto CT) bands in the visible region (epsilon in the 10(4)-10(5) M(-)(1) cm(-)(1) range). Absorption features are also present at higher energies, due to pi-pi transitions centered in the dto ligands (ligand centered, LC). All the compounds exhibit a unstructured luminescence band in fluid solution at room temperature, with the maximum centered in the 700-730 nm range. The luminescence bands are blue-shifted about 4000 cm(-)(1) on passing to the rigid matrix at 77 K. Luminescence lifetimes are on the 10(-)(8)-10(-)(7) s time scale at room temperature and 1 order of magnitude longer at 77 K. Luminescence is assigned to triplet Pt/S --> dto CT excited states in all cases. Compounds 3-6 also exhibit a second higher-energy luminescence band at room temperature, centered at about 610 nm, attributed to a LC excited state. Charge transfer interactions between halides and dto ligands destabilize dto-centered orbitals, affecting the energy of Pt/S --> dto CT transitions and states. The X counterions and X --> dto CT levels are proposed to play a role in promoting excited state conversion between LC and Pt/S --> dto CT levels. The R substituents on the nitrogen atoms of the dto ligands influence the absorption and photophysical properties of the compounds, by affecting proximity of the ion pairs. The possibility to functionalize the R substituents may open the way to interface these luminescent compounds with desired substrates and to construct supramolecular assemblies.     

Theoretical study of the UV photodissociation of Cl2: potentials, transition moments, extinction coefficients, and Cl*/Cl branching ratio

Potential energy curves for the X (1)Sigma(g) (+) ground state and Omega=0(u) (+), 1(u) valence states and dipole moments for the 0(u) (+), 1(u)-X transitions are obtained in an ab initio configuration interaction study of Cl(2) including spin-orbit coupling. In contrast to common assumptions, it is found that the B (3)Pi(0(+)u)-X transition moment strongly depends on internuclear distance, which has an important influence on the Cl(2) photodissociation. Computed energy curves and transition moments are employed to calculate the A, B, C<--X extinction coefficients, the total spectrum for the first absorption band, and the Cl(*)((2)P(1/2))/Cl((2)P(3/2)) branching ratio as a function of excitation wavelength. The calculated data are shown to be in good agreement with available experimental results.     

Solvatochromic correlations and ground- and excited-state dipole moments of curcuminoid dyes

Experimental dipole moments of curcumin (1) and of its parent compound dicinnamoylmethane (2) were determined in dioxane and benzene, respectively. Theoretical dipole moments were calculated using a combination of the PPP method (pi-moment) and a vector sum of the sigma-bond moments (sigma-moment) as well as by the ZINDO/1 method. Solvatochromic correlations were used to obtain the experimental first excited singlet-state dipole moments. The experimental electronic absorption spectra were compared with the calculated transitions.     

Structure and properties of perimidine and its derivatives

The electronic absorption spectra, luminescence spectra, and vibrational spectra of perimidine and its derivatives have been studied. On the basis of the dipole moments and vibrational spectra, the conformations of 2-(o-hydroxyphenyl)perimidine and 2-(o-hydroxyphenyl)perimidine and 2-(o-methoxyphenyl)perimidine, which are stabilized by intramolecular hydrogen bonds, have been established. The electronic configurations of the perimidines in the ground and first excited states have been calculated by Hückel's MO method. The results have been compared with data on the reactivity and electronic absorption spectra of the perimidines.     

Diazaborolyl-boryl push-pull systems with ethynylene-arylene bridges as 'turn-on' fluoride sensors

Two linear π-conjugated systems with 1,3-diethyl-1,3,2-benzodiazaborolyl [C(6)H(4)(NEt)(2)B-] as a donor group and dimesitylboryl (-BMes(2)) as acceptor were synthesised with -ethynylene-phenylene- (-C[triple bond, length as m-dash]C-1,4-C(6)H(4)-, 3) and -ethynylene-thiophene- (-C[triple bond, length as m-dash]C-2,5-C(4)H(2)S-12) bridges between the boron atoms. An assembly (20) consisting of two diazaborolyl-ethynylene-phenylene-boryl units, [C(6)H(4)(NCy)(N')B-C[triple bond, length as m-dash]C-1,4-C(6)H(4)-BMes(2)] joined via a 1,4-phenylene unit at the nitrogen atoms (N') of the diazaborolyl units was also synthesised. The three push-pull systems, 3, 12 and 20, form salts on fluoride addition with the BMes(2) groups converted into (BMes(2)F)(-) anions. The molecular structures of 3, 12 and (NBu(4))(12·F) were elucidated by X-ray diffraction analyses. The borylated systems 3, 12 and 20 show intense blue luminescence in cyclohexane with quantum yields (Φ(fl)) of 0.99, 0.44 and 0.94, respectively, but weak blue-green luminescence in tetrahydrofuran (Φ(fl) = 0.02-0.05). The charge transfer nature of these transitions is supported by TD-DFT computations with the CAM-B3LYP functional. Addition of tetrabutylammonium fluoride to tetrahydrofuran solutions of 3 and 20 resulted in strong violet-blue luminescence with emission intensities up to 46 times more than the emission intensities observed prior to fluoride addition. Compounds 3 and 20 are demonstrated here as remarkable 'turn-on' fluoride sensors in tetrahydrofuran solutions.     

Electronic transition dipole moment directions of reduced anionic flavin in stretched poly(vinyl alcohol) films

The IR and UV/vis linear dichroic spectra of reduced anionic flavin mononucleotide (FMNH-) partially oriented in poly(vinyl alcohol) (PVA) films have been measured to determine the direction of the major electronic transition dipole moments. The IR linear dichroism (LD) was measured in the 1750-1350 cm(-1) region to provide the overall molecular orientation of the FMNH- in the stretched films. Time-dependent density functional theory using the B3LYP functional was used to calculate the normal modes and the transition dipole moments of reduced lumiflavin. The calculated normal modes assisted in IR band assignments and in the determination of the IR transition dipole moment directions which were required for the determination of the orientation parameters for FMNH- in PVA films. The UV/vis LD spectrum was measured over the 200-700 nm region and was resolved into contributions from three pi-->pi* transitions. The directions of the transitions are 90 degrees+/-4 degrees at 440 nm, 79 degrees+/-4 degrees at 350 nm, and 93 degrees+/-4 degrees at 290 nm with counterclockwise rotations with respect to the N5-N10 axis. Comparison of the calculated and experimentally determined transition dipole moments allowed for refined assignment of the transition dipole moment directions. To our knowledge, this is the first experimental evidence that the 350-450 nm absorption arises from two unique transitions. Remarkably, the two lowest energy transition dipole moments for FMNH- are nearly parallel to those obtained in prior studies for both oxidized and semiquinone flavin.     

Electronic absorption spectra of C3Cl, C4Cl, and their ions in neon matrices

Electronic absorption spectra of C3Cl, C3Cl+, C3Cl-, C4Cl, and C4Cl+ have been recorded in 6 K neon matrices following mass selection. Ab initio calculations were performed (CCSD(T) and CASSCF) to identify the ground and accessible excited states of each molecule. The estimated excitation energies and transition moments aid the assignment. The absorptions observed for C3Cl are the 5(2)A' <-- X(2)A' and 3(2)A' <-- X(2)A' transitions of the bent isomer and the (2)A1 <-- X(2)B2 transition of the cyclic form in the UV (336.1 nm), visible (428.7 nm), and near-IR (1047 nm) regions, respectively. The band systems for bent C3Cl- (435.2 nm) and linear C3Cl+ (413.2 nm) are both in the visible region and correspond to 2(1)A' <-- X(1)A' and (1)pi <-- X(1)sigma+ type transitions. The C4Cl and C4Cl+ chains are linear, and the band origins of the 2(2)pi <-- X(2)pi and 2(3)pi <-- X(3)pi electronic transitions are at 427.0 and 405.7 nm. The spectral assignments are supported by analysis of the vibrational structure associated with each electronic transition.     

Excited state dipole moments and polarizabilities of centrosymmetric and dimeric molecules. II. Polyenes, polyynes and cumulenes

Electro-optical absorption spectra are measured for a series of polyenes, polyynes and cumulenes with centrosymmetric π-chromophores in cyclohexane solution at 298 K. For all molecules the long-axis component of the polarizability tensor is considerably larger in the first dipole-allowed singlet state compared to the ground state. The transition moments are found to be parallel to the long molecular axis. All polyenes and one cumulene show a linear Stark component indicating a long-axis excited state dipole moment. Both the dipole moments and the polarizabilities are corrected within the extended Onsager model for solvent cavity and reaction field effects. It is suggested that symmetry lowering solvent perturbations are the reason for the apparent excited state dipole moments.