Anionic polyelectrolyte-stabilized nanoparticles via RAFT aqueous dispersion polymerization

We report the synthesis of anionic sterically stabilized diblock copolymer nanoparticles via polymerization-induced self-assembly using a RAFT aqueous dispersion polymerization formulation. The anionic steric stabilizer is a macromolecular chain-transfer agent (macro-CTA) based on poly(potassium 3-sulfopropyl methacrylate) (PKSPMA), and the hydrophobic core-forming block is based on poly(2-hydroxypropyl methacrylate) (PHPMA). The effect of varying synthesis parameters such as the salt concentration, solids content, relative block composition, and anionic charge density has been studied. In the absence of salt, self-assembly is problematic when using a PKSPMA stabilizer because of lateral repulsion between highly charged anionic chains. However, in the presence of added salt this problem can be overcome by reducing the charge density within the coronal stabilizer layer by either (i) statistically copolymerizing the KSPMA monomer with a nonionic comonomer (2-hydroxyethyl methacrylate, HEMA) or (ii) using a binary mixture of a PKSPMA macro-CTA and a poly(glycerol monomethacrylate) (PGMA) macro-CTA. These diblock copolymer nanoparticles were analyzed by (1)H NMR spectroscopy, gel permeation chromatography (GPC), dynamic light scattering (DLS), transmission electron microscopy (TEM), and aqueous electrophoresis. NMR studies suggest that the HPMA polymerization is complete within 2 h at 70 °C, and DMF GPC analysis confirms that the resulting diblock copolymers have relatively low polydispersities (M(w)/M(n) < 1.30). NMR also suggests a significant degree of hydration for the core-forming PHPMA chains. Depending on the specific reaction conditions, a series of spherical nanoparticles with mean diameters ranging from 50 to 200 nm with tunable anionic surface charge can be prepared. If a binary mixture of anionic and nonionic macro-CTAs is utilized, then it is also possible to access a vesicular morphology.     

Surface modification with well-defined biocompatible triblock copolymers Improvement of biointerfacial phenomena on a poly(dimethylsiloxane) surface

To improve interfacial phenomena of poly(dimethylsiloxane) (PDMS) as biomaterials, well-defined triblock copolymers were prepared as coating materials by reversible addition-fragmentation chain transfer (RAFT) controlled polymerization. Hydroxy-terminated poly(vinylmethylsiloxane-co-dimethylsiloxane) (HO–PV_lD_mMS–OH) was synthesized by ring-opening polymerization. The copolymerization ratio of vinylmethylsiloxane to dimethylsiloxane was 1/9. The molecular weight of HO–PV_lD_mMS–OH ranged from (1.43 to 4.44) × 10⁴, and their molecular weight distribution (M_w/M_n) as determined by size-exclusion chromatography equipped with multiangle laser light scattering (SEC-MALS) was 1.16. 4-Cyanopentanoic acid dithiobenzoate was reacted with HO–PV_lD_mMS–OH to obtain macromolecular chain transfer agents (macro-CTA). 2-Methacryloyloxyethyl phosphorylcholine (MPC) was polymerized with macro-CTAs. The gel-permeation chromatography (GPC) chart of synthesized polymers was a single peak and M_w/M_n was relatively narrow (1.3–1.6). Then the poly(MPC) (PMPC)–PV_lD_mMS–PMPC triblock copolymers were synthesized. The molecular weight of PMPC in a triblock copolymer was easily controllable by changing the polymerization time or the composition of the macro-CTA to a monomer in the feed. The synthesized block copolymers were slightly soluble in water and extremely soluble in ethanol and 2-propanol.

Surface modification was performed via hydrosilylation. The block copolymer was coated on the PDMS film whose surface was pretreated with poly(hydromethylsiloxane). The surface wettability and lubrication of the PDMS film were effectively improved by immobilization with the block copolymers. In addition, the number of adherent platelets from human platelet-rich plasma (PRP) was dramatically reduced by surface modification. Particularly, the triblock copolymer having a high composition ratio of MPC units to silicone units was effective in improving the surface properties of PDMS.

By selective decomposition of the Si–H bond at the surface of the PDMS substrate by irradiation with UV light, the coating region of the triblock copolymer was easily controlled, resulting in the fabrication of micropatterns. On the surface, albumin adsorption was well manipulated.     

Synthesis of transparent block copolymers consisting of poly(diisopropyl fumarate) and poly(2-ethylhexyl acrylate) segments by reversible addition-fragmentation chain transfer polymerization using trithiocarbonates as the chain transfer agents

The reversible addition-fragmentation chain transfer polymerization of diisopropyl fumarate (DiPF) was carried out using ethyl 2-[[(dodecylthio)thioxymethyl]thio]-2-methylpropionate (T1) and 1,1′-(1,2-ethanediyl) bis[2-[[(dodecylthio)thioxymethyl]thio]-2-methylpropionate] (T2) as the monofunctional and difunctional chain transfer agents (CTAs) to synthesize poly(diisopropyl fumarate) (PDiPF) with a rigid chain conformation. The obtained PDiPF had a well-controlled molecular weight, molecular weight distribution, and structure of the chain ends. Size exclusion chromatography and NMR measurements revealed an excellent introduction efficiency (84–98%) of the terminal trithiocarbonate group into the polymer chain end. They were available as the monofunctional and difunctional macro-CTAs to synthesize the AB and ABA block copolymers, respectively. While the well-controlled block copolymers were solely obtained by the polymerization of 2-ethylhexyl acrylate as the second monomer in the presence of PDiPF as the macro-CTA, the block copolymerization of DiPF using poly(2-ethylhexyl acrylate) as the macro-CTA failed. The trithiocarbonate group at the chain end was completely removed by the reaction with n-butylamine and it was valid for the improvement of the coloration and other optical properties of the transparent polymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2584–2594     

Complex,degradable polyester materials via ketoxime ether‐based functionalization: Amphiphilic,multifunctional graft copolymers and their resulting solution‐state aggregates

Degradable, amphiphilic graft copolymers of poly(ε‐caprolactone)‐graft‐poly(ethylene oxide), PCL‐g‐PEO, were synthesized via a grafting onto strategy taking advantage of the ketones presented along the backbone of the statistical copolymer poly(ε‐caprolactone)‐co‐(2‐oxepane‐1,5‐dione), (PCL‐co‐OPD). Through the formation of stable ketoxime ether linkages, 3 kDa PEO grafts and p‐methoxybenzyl side chains were incorporated onto the polyester backbone with a high degree of fidelity and efficiency, as verified by NMR spectroscopies and GPC analysis (90% grafting efficiency in some cases). The resulting block graft copolymers displayed significant thermal differences, specifically a depression in the observed melting transition temperature, T_m, in comparison with the parent PCL and PEO polymers. These amphiphilic block graft copolymers undergo self‐assembly in aqueous solution with the P(CL‐co‐OPD‐co‐(OPD‐g‐PEO)) polymer forming spherical micelles and a P(CL‐co‐OPD‐co‐(OPD‐g‐PEO)‐co‐(OPD‐g‐pMeOBn)) forming cylindrical or rod‐like micelles, as observed by transmission electron microscopy and atomic force microscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3553–3563, 2010     

Ethylene Polymerization-Induced Self-Assembly (PISA) of Poly(ethylene oxide)-block-polyethylene Copolymers via RAFT

Poly(ethylene oxide) (PEO) with dithiocarbamate chain ends (PEO–SC(=S)−N(CH₃)Ph and PEO–SC(=S)−NPh₂, named PEO-1 and PEO-2 , respectively) were used as macromolecular chain-transfer agents (macro-CTAs) to mediate the reversible addition–fragmentation chain transfer (RAFT) polymerization of ethylene in dimethyl carbonate (DMC) under relatively mild conditions (80 °C, 80 bar). While only a slow consumption of PEO-1 was observed, the rapid consumption of PEO-2 led to a clean chain extension and the formation of a polyethylene (PE) segment. Upon polymerization, the resulting block copolymers PEO-b-PE self-assembled into nanometric objects according to a polymerization-induced self-assembly (PISA).     

The Synthesis of Poly(ethylene oxide)-Block-Polybutylacrylate

ＴｈｅＳｙｎｔｈｅｓｉｓｏｆＰｏｌｙ（ｅｔｈｙｌｅｎｅｏｘｉｄｅ）┐Ｂｌｏｃｋ┐Ｐｏｌｙｂｕｔｙｌａｃｒｙｌａｔｅ＊＊ＳｕｐｐｏｒｔｅｄｂｙｔｈｅＮａｔｉｏｎａｌＮａｔｕｒａｌＳｃｉｅｎｃｅＦｏｕｎｄａｔｉｏｎｏｆＣｈｉｎａａｎｄＤｏｃｔｏｒａｌｆｏ...     

Synthesis and micelle formation of triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) in aqueous solution

Amphiphilic triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) (PMMA-b-PEO-b-PMMA) with well-defined structure were synthesized via atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) initiated by the PEO macroinitiator. The macroinitiator and triblock copolymer with different PMMA and/or PEO block lengths were characterized with ¹H and ¹³C NMR and gel permeation chromatography (GPC). The micelle formed by these triblock copolymers in aqueous solutions was detected by fluorescence excitation and emission spectra of pyrene probe. The critical micelle concentration (CMC) ranged from 0.0019 to 0.016 mg/mL and increased with increasing PMMA block length, while the PEO block length had less effect on the CMC. The partition constant K_v for pyrene in the micelle and in aqueous solution was about 10⁵. The triblock copolymer appeared to form the micelles with hydrophobic PMMA core and hydrophilic PEO loop chain corona. The hydrodynamic radius R_h,app of the micelle measured with dynamic light scattering (DLS) ranged from 17.3 to 24.0 nm and increased with increasing PEO block length to form thicker corona. The spherical shape of the micelle of the triblock copolymers was observed with an atomic force microscope (AFM). Increasing hydrophobic PMMA block length effectively promoted the micelle formation in aqueous solutions, but the micelles were stable even only with short PMMA blocks.     

端氨基聚乙二醇-聚已内酯二嵌段共聚物的合成及其微球表面氨基和形态的调控

生物降解高分子作为一种重要的生物材料已经发展到第3代[1],实际应用的复杂性不仅要求高分子材料本身具有合适的降解性能、热性能、力学性能和加工性能等,而且还要求高分子材料具有能够刺激细胞生长、识别特定细胞等生物活性特征.高分子材料的这些生物活性主要是通过高分子材料     

Synthesis and properties of novel functional polymers from tetrachlorinated perylene bisimide

Asymmetric tetrachlorinated perylene‐3,4,9,10‐tetracarboxylic acid bisimides (4Cl‐PBI) were prepared in one‐pot by a reaction of tetrachlorinated perylene‐3,4,9,10‐tetracarboxylic acid dianhydride with a mixture of 2‐aminoethanol and dodecanamine or 2‐decyltetradecan‐1‐amine. Then, two 4Cl‐PBI methacrylates bearing one (M1) and two (M2) long alkyl tails were prepared, and a series of functional homopolymers were obtained by subjecting conventional radical polymerization and atom transfer radical polymerization. Furthermore, amphiphilic block copolymers pendent with 4Cl‐PBI units, PEO‐PM1 and PEO‐PM2, were prepared using monomethoxyl PEO bromoisobutyrate as a macroinitiator. Size exclusion chromatography, UV–vis spectroscopy, fluorescence spectroscopy, and cyclic voltammetry have been applied to characterize the polymers obtained. Moreover, the Ullmann reactions between the grafted 4Cl‐PBI units were conducted to form large π units, and the PEO‐PM2 block copolymers gave di‐ or tri‐PBI units in about 30%. Also, self‐assembly of the amphiphilic block copolymers PEO‐PM1 and PEO‐PM2 in water was applied to generate spherical nanoparticles of 4Cl‐PBI. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

SYNTHESIS AND CHARACTERIZATION OF AMPHIPHILIC GRAFT COPOLYMER CONTAINING MICROPHASE SEPARATED AND LONG POLY(ETHYLENE OXIDE) SIDE CHAIN STRUCTURES**

Acryloyl terminated Poly (ethyleneoxide)macromonomers (PEO-A) with different PEO chain lengths have been prepared by deactivation of PEO alkoxide with acryloyl chloride. A new kind of amphiphilic polystyrene-g-poly (ethylene oxide)graft copolymer containing both microphase separated and PEO side chain structures has been synthesized from radical copolymerization of PEO-A macromonomer with styrene. After careful purification by a newly-developed method called "selective dissolution', the well-defined structure of the purified copolymers was confirmed by IR, ~1H-NMR and GPC. Various experimental parameters controlling the copolymerization were studied in detail. The results indicated that the feed ratio of styrene to macromonomer(S/M) was the most important determining factor for the composition of the copolymers. A detailed "comb- model" was proposed to describe the molecular structure of the graft copolymers. Finally, this amphiphilic graft copolymers may readily form microphase separated structures as clearly indicated by transmission electron microscopy.     

Biodegradable amphiphilic block copolymers containing functionalized PEO blocks: Controlled synthesis and biomedical potentials

A series of controllable amphiphilic block copolymers composed of poly(ethylene oxide) (PEO) as the hydrophilic block and poly(?-caprolactone) (PCL) as the hydrophobic block with the amino terminal group at the end of the PEO chain (PCL-b-PEO-NH₂) were synthesized. Based on the further reaction of reactive amino groups, diblock copolymers with functional carboxyl groups (PCL-b-PEO-COOH) and functional compounds RGD (PCL-b-PEO-RGD) as well as the triblock copolymers with thermosensitive PNIPAAm blocks (PCL-b-PEO-b-PNIPAAM) were synthesized. The well-controlled structures of these copolymers with functional groups and blocks were characterized by gel permeation chromatography (GPC) and ¹H NMR spectroscopy. These copolymers with functionalized hydrophilic blocks were fabricated into microspheres for the examination of biofunctions via cell culture experiments and in vitro drug release. The results indicated the significance of introducing functional groups (e.g., NH₂, COOH and RGD) into the end of the hydrophilic block of amphiphilic block copolymers for biomedical potentials in tissue engineering and controlled drug release.     

Self‐assembly of amphiphilic ABA random triblock copolymers in water

Self‐assembly of amphiphilic ABA random triblock copolymers in water serves as a novel approach to create unique structure micelles connected with flexible linkages. The ABA triblock copolymers consist of amphiphilic random copolymers bearing hydrophilic poly(ethylene glycol) and hydrophobic dodecyl pendants as the A segments and a hydrophilic poly(ethylene oxide) (PEO) as the middle B segment. The A block is varied in dodecyl methacrylate content of 20%–50% and degree of polymerization (DP) of 100‐200. By controlling the composition and DP of the A block, various architectures can be tailor‐made as micelles in water: PEO‐linked double core unimer micelles, PEO‐looped unimer or dimer micelles, and multichain micelles. Those PEO‐linked or looped micelles further exhibit thermoresponsive solubility in water. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 313–321     

酶促开环聚合合成双亲性H型嵌段共聚物及其自组装

通过固定化酶Novozyme435（NV435）催化聚乙二醇（PEG）开环聚合己内酯（CL）得到端基带有羟基的ABA型三嵌段聚合物,用2,2-二氯代乙酰氯将聚合物的端羟基功能化形成H型大分子引发剂,在CuCl／HMTETA体系中引发4-乙烯基吡啶（4VP）进行原子转移自由基聚合反应（ATRP）,得到了具有两亲性的H型五嵌段聚合物（PVP）2-b—PCL-b．PEG-PCL-（PVP）2,用红外光谱（FT IR）,核磁共振（^1H NMR）,凝胶渗透色谱（GPC）对其结构与分子量及其分子量分布进行了表征,结果表明：H型五嵌段聚合物分子量46121g／mol,分子量分布1．30．并利用动态光散射（DLS）和原子力显微镜（AFM）对聚合物在水溶液中的自组装行为进行了研究,H型嵌段聚合物的胶束呈球形结构,平均直径为70nm左右．     

Template-directed adsorption of block copolymers on alkanethiol-patterned gold surfaces

Functionalized alkanethiols have been self-assembled on gold to modify the wetting properties of the surface and promote or hinder the adsorption of block copolymers containing both hydrophobic and hydrophilic blocks. X-ray photoelectron spectroscopy (XPS) studies of spin-coated polyethylene-block-poly(ethylene oxide) (PE-b-PEO) copolymers on 16-mercaptohexadecanoic acid (MHDA)-, octadecanethiol (ODT)-, and 1H,1H,2H,2H-perfluorodecanethiol (PFDT)-covered surfaces have been performed. In the case of an 80 wt % PEO block copolymer, spin-coating on a gold surface precovered with MHDA results in a polymer film thick enough to completely attenuate Au 4f photoelectrons; spin-coating on the more hydrophobic ODT and PFDT monolayers leads to significantly thinner polymer films and incomplete attenuation of the gold photoelectrons. The opposite results are observed when a 20 wt % PEO block copolymer is used. Angle-resolved XPS studies of the 80 wt % PEO block copolymer spin-coated onto an MHDA-covered surface indicate that the PE blocks of the polymer segregate to the near-surface region, oriented away from the hydrophilic carboxylic acid tails of the monolayers; the surface concentration of PE is further enhanced by annealing at 90 degrees C. Microcontact printing and dip-pen nanolithography have been used to pattern gold surfaces with MHDA, and the surfaces have been backfilled with ODT or PFDT, such that the unpatterned regions of the surface are covered with hydrophobic monolayers. In the case of backfilling with PFDT, spin-coating the 80 wt % PEO copolymer onto these patterned surfaces and subsequent annealing results in the block copolymer preferentially adsorbing on the MHDA-covered regions and forming well-defined patterns that mimic the MHDA pattern, as determined by scanning electron microscopy and atomic force microscopy. Significantly worse patterning, characterized by micron-sized polymer droplets, results when the surface is backfilled with ODT instead of PFDT. Using PFDT and MHDA, polymer features having widths as small as 500 nm have been formed. These studies demonstrate a novel method to pattern block copolymers with nanoscale resolution.     

Synthesis and characterization of side‐chain liquid crystalline ABC triblock copolymers with p‐methoxyazobenzene moieties by atom transfer radical polymerization

A series of novel side‐chain liquid crystalline ABC triblock copolymers composed of poly(ethylene oxide) (PEO), polystyrene (PS), and poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PMMAZO) were synthesized by atom transfer radical polymerization (ATRP) using CuBr/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as a catalyst system. First, the bromine‐terminated diblock copolymer poly(ethylene oxide)‐block‐polystyrene (PEO‐PS‐Br) was prepared by the ATRP of styrene initiated with the macro‐initiator PEO‐Br, which was obtained from the esterification of PEO and 2‐bromo‐2‐methylpropionyl bromide. An azobenzene‐containing block of PMMAZO with different molecular weights was then introduced into the diblock copolymer by a second ATRP to synthesize the novel side‐chain liquid crystalline ABC triblock copolymer poly(ethylene oxide)‐block‐polystyrene‐block‐poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PEO‐PS‐PMMAZO). These block copolymers were characterized using proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatograph (GPC). Their thermotropic phase behaviors were investigated using differential scanning calorimetry (DSC) and polarized optical microscope (POM). These triblock copolymers exhibited a smectic phase and a nematic phase over a relatively wide temperature range. At the same time, the photoresponsive properties of these triblock copolymers in chloroform solution were preliminarily studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4442–4450, 2008     

Synthesis, Purification and Characterization of Amphiphilic and Microphase Separated Graft Copolymer Polystyrene-g-Poly(ethylene oxide)

The present paper covers the poly (ethylene oxide) macromer with vinyl benzyl terminal group (PEO-VB) prepared by deactivation of the alkoxide function of mono-functional "living" PEO chains with vinyl benzyl chloride (VBC). The obtained macromers were subjected to careful purification and detailed characterization. A new kind of amphiphilic polystyrene-g-poly(ethylene oxide) (PS-g-PEO) with both mi-crophase separated and PEO side chains was synthesized from radical copolymerization of PEO-VB macromer with styrene monomer. An improved purification method, referred as "selective dissolvation", was established for the isolation of graft copolymers from the grafting products, and the purity and yield of the purified copolymers were satisfactory. The well-defined structure of the purified copolymers was confirmed by IR, 1H NMR and GPC. The bulk composition of the graft copolymers was determined by a well-established first derivative UV spectrometry. Various experimental parameters controlling the copolymeri     

Synthesis and Surface Tension Properties of Polyethyleneimine—Polyethylene Oxide Block Copolymers

IntroductionInrecentyearstherehavebeenincreasingactivitiesinblockcopolymersynthesisandcharacterization .Manystudieshaveshownthatblockcopolymersformmicellesofcloseasso ciationupondissolutionintoaselectivesolvent,whichactsthermodynamicallyasagoodsolventforoneblockandapoorsolventfortheotherblock .1Theimportanceofthesesyntheticactivitieshasbeenemphasizedbyblockcopolymermicelles ,whichhavebeendemonstratedaspotentialdrugcarriers,2 ,3andotherinvestigationshaverevealedtheirexcellentutilityincancerchem…     

Chain-length dependence of diblock copolymer micellization kinetics studied by stopped-flow pH-jump

A series of well-defined poly(ethylene oxide)- b-poly(2-(diethylamino)ethyl methacrylate) (PEO- b-PDEA) diblock copolymers containing PEO block of identical chain length and PDEA block with varying degrees of polymerization (DP, in the range of 32-154) were prepared via atom transfer radical polymerization (ATRP) employing a PEO-based macroinitiator (DP = 113). Upon a pH-jump from 3 to 12 under highly efficient stopped-flow mixing conditions, PEO- b-PDEA copolymers spontaneously form spherical micelles of increasing sizes and aggregation numbers ( N agg) with increasing PDEA chain lengths. Stopped-flow light scattering technique was used to probe the pH-induced micellization kinetics of PEO- b-PDEA copolymers, aiming to elucidate the PDEA chain-length effects on the unimer-to-micelle transition process. Upon a stopped-flow pH-jump from 3 to 12, the obtained dynamic traces can be well-fitted with double exponential functions. The calculated fast and slow characteristic relaxation times (tau 1 and tau 2) can be ascribed to the formation of quasi-equilibrium micelles (fast process) and subsequent relaxation into final equilibrium micelles (slow process), respectively. For PEO 113- b-PDEA 32 and PEO 113- b-PDEA 61, tau 2 is almost independent of polymer concentrations, suggesting that the relaxation from quasi-equilibrium micelles into final equilibrium micelles mainly proceeds via insertion/expulsion of unimer chains. Upon increasing the DP of pH-responsive PDEA block to 89, 117, and 154, the obtained slow relaxation time, tau 2, tends to decrease with increasing polymer concentrations, suggesting that the slow process is dominated by the micelle fusion/fission mechanism. The apparent activation energy ( E a) associated with tau 2 has also been determined from temperature-dependent micellization kinetics for five PEO- b-PDEA copolymers. It was found that during micellization, copolymers with longer PDEA blocks exhibit much lower E a compared to those with shorter blocks. Thus, we observed experimentally for the first time that increasing the hydrophobic block length in double hydrophilic block copolymers (DHBCs) can transform the mechanism of the slow process from unimer insertion/expulsion to micelle fusion/fission.     

Engineering superior toughness in commercially viable block copolymer modified epoxy resin

The microstructure and mechanical properties of a block copolymer modified commercial thermoset plastic formed from a bisphenol-A based epoxy and a bio-derived amine hardener (Cardolite^® NC-541LV) were investigated. A series of poly(ethylene oxide)-b-poly(butylene oxide) (PEO-PBO) diblock copolymers was synthesized at fixed composition (31 ± 1% by volume PEO) and varying molecular weight expanding on a commercially available PEO-PBO compound marketed by the Dow Chemical Company under the trade name FORTEGRA™ 100; direct application of any of these block copolymers resulted in little improvement of the poor fracture toughness of the cured material. Modification of the resin formulation and curing protocol led to the development of well-defined spherical and branched worm-like micelles containing a PBO core and PEO corona in the cross-linked products as evidenced by transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS) measurements. Maximum fracture toughness (K_1c) and a ninefold increase in the critical strain energy release rate (G_1c) over the unmodified neat epoxy was achieved at 5 wt % loading of intermediate molecular weight PEO-PBO, without measureable reductions in modulus, glass transition temperature or transparency. This study provides new strategies for engineering improved performance in thermoset materials using block copolymer additives that exhibit challenging mixing thermodynamic characteristics with the component monomers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 189–204     

Supramolecular polyseudorotaxanes formation between star‐block copolymer and α‐cyclodextrin: From outer block to diblock inclusion complexation

A series of star‐block poly(L ‐lactide)‐b‐poly(ethylene oxide) (SPLLA‐b‐PEO) copolymers were synthesized by ring‐opening polymerization (ROP) and DCC chemistry. The inclusion complexes of SPLLA‐b‐PEO copolymers and α‐cyclodextrin (α‐CD) were prepared with two different methods. FTIR, ¹H NMR, WAXD, DSC, and TGA indicate that α‐CD only can be threaded onto PEO blocks in inclusion complexes of α‐CD‐SPLLA‐b‐PEO1.1K‐a, α‐CD‐SPLLA‐b‐PEO2K‐a, and α‐CD‐SPLLA‐b‐PEO5K‐a formed without heating and ultrasonication, and can be threaded onto both PLLA and PEO blocks in inclusion complexes of α‐CD‐SPLLA‐b‐PEO1.1K‐b, α‐CD‐SPLLA‐b‐PEO2K‐b, and α‐CD‐SPLLA‐b‐PEO5K‐b formed with heating and ultrasonication. Namely, α‐CDs can be threaded onto PEO blocks and the flanking bulky PLLA blocks of star‐block copolymers to form stable polyseudorotaxanes with heating method and ultrasonication to conquer the activation energy barrier of the inclusion complexation between bulky PLLA and α‐CD and the effect of the steric hindrance of star‐block copolymers. With the alteration of preparing methods, the inclusion complexes of α‐CD with the outer PEO block or PEO and PLLA blocks were obtained successfully. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2754–2762, 2009