Efficient Reduction of CO2 into Formic Acid on a Lead or Tin Electrode using an Ionic Liquid Catholyte Mixture

Highly efficient electrochemical reduction of CO₂ into value‐added chemicals using cheap and easily prepared electrodes is environmentally and economically compelling. The first work on the electrocatalytic reduction of CO₂ in ternary electrolytes containing ionic liquid, organic solvent, and H₂O is described. Addition of a small amount of H₂O to an ionic liquid/acetonitrile electrolyte mixture significantly enhanced the efficiency of the electrochemical reduction of CO₂ into formic acid (HCOOH) on a Pb or Sn electrode, and the efficiency was extremely high using an ionic liquid/acetonitrile/H₂O ternary mixture. The partial current density for HCOOH reached 37.6 mA cm^?2 at a Faradaic efficiency of 91.6 %, which is much higher than all values reported to date for this reaction, including those using homogeneous and noble metal electrocatalysts. The reasons for such high efficiency were investigated using controlled experiments.     

MoP Nanoparticles Supported on Indium‐Doped Porous Carbon: Outstanding Catalysts for Highly Efficient CO2 Electroreduction

Electrochemical reduction of CO₂ into value‐added product is an interesting area. MoP nanoparticles supported on porous carbon were synthesized using metal–organic frameworks as the carbon precursor, and initial work on CO₂ electroreduction using the MoP‐based catalyst were carried out. It was discovered that MoP nanoparticles supported on In‐doped porous carbon had outstanding performance for CO₂ reduction to formic acid. The Faradaic efficiency and current density could reach 96.5 % and 43.8 mA cm^?2, respectively, when using ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate as the supporting electrolyte. The current density is higher than those reported up to date with very high Faradaic efficiency. The MoP nanoparticles and the doped In₂O₃ cooperated very well in catalyzing the CO₂ electroreduction.     

Reduced SnO2 Porous Nanowires with a High Density of Grain Boundaries as Catalysts for Efficient Electrochemical CO2‐into‐HCOOH Conversion

Electrochemical conversion of CO₂ into energy‐dense liquids, such as formic acid, is desirable as a hydrogen carrier and a chemical feedstock. SnO_x is one of the few catalysts that reduce CO₂ into formic acid with high selectivity but at high overpotential and low current density. We show that an electrochemically reduced SnO₂ porous nanowire catalyst (Sn‐pNWs) with a high density of grain boundaries (GBs) exhibits an energy conversion efficiency of CO₂‐into‐HCOOH higher than analogous catalysts. HCOOH formation begins at lower overpotential (350 mV) and reaches a steady Faradaic efficiency of ca. 80 % at only −0.8 V vs. RHE. A comparison with commercial SnO₂ nanoparticles confirms that the improved CO₂ reduction performance of Sn‐pNWs is due to the density of GBs within the porous structure, which introduce new catalytically active sites. Produced with a scalable plasma synthesis technology, the catalysts have potential for application in the CO₂ conversion industry.     

Solid Molecular Phosphine Catalysts for Formic Acid Decomposition in the Biorefinery

The co‐production of formic acid during the conversion of cellulose to levulinic acid offers the possibility for on‐site hydrogen production and reductive transformations. Phosphorus‐based porous polymers loaded with Ru complexes exhibit high activity and selectivity in the base‐free decomposition of formic acid to CO₂ and H₂. A polymeric analogue of 1,2‐bis(diphenylphosphino)ethane (DPPE) gave the best results in terms of performance and stability. Recycling tests revealed low levels of leaching and only a gradual decrease in the activity over seven runs. An applicability study revealed that these catalysts even facilitate selective removal of formic acid from crude product mixtures arising from the synthesis of levulinic acid.     

Hydride Pinning Pathway in the Hydrogenation of CO2 to Formic Acid on Dimeric Tin Dioxide

Capture of CO₂ and its conversion into organic feedstocks are increasingly needed as society moves towards a renewable energy economy. Here, a hydride-assisted selective reduction pathway is proposed for the conversion of CO₂ to formic acid (FA) over SnO₂ monomers and dimers. Our density functional theory calculations infer a strong chemisorption of CO₂ on SnO₂ clusters forming a carbonate structure, whereas heterolytic cleavage of H₂ provides a new pathway for the selective reduction of CO₂ to formic acid at low overpotential. Among the two investigated pathways for reduction of CO₂ to HCOOH, the hydride pinning pathway is found promising with a unique selectivity for HCOOH. The negatively-charged hydride forms on the cluster during the dissociation of H₂ and facilitates the formation of a formate intermediate, which determines the selectivity for FA over the alternative CO and H₂ evolution reaction. It is confirmed that SnO₂ clusters exhibit a different catalytic behaviour from their surface equivalents, thus offering promise for future work investigating the reduction of CO₂ to FA via a hydride pinning pathway at low overpotential and CO₂ capturing.     

Dehydrogenation of Formic Acid at Room Temperature: Boosting Palladium Nanoparticle Efficiency by Coupling with Pyridinic‐Nitrogen‐Doped Carbon

The use of formic acid (FA) to produce molecular H₂ is a promising means of efficient energy storage in a fuel‐cell‐based hydrogen economy. To date, there has been a lack of heterogeneous catalyst systems that are sufficiently active, selective, and stable for clean H₂ production by FA decomposition at room temperature. For the first time, we report that flexible pyridinic‐N‐doped carbon hybrids as support materials can significantly boost the efficiency of palladium nanoparticle for H₂ generation; this is due to prominent surface electronic modulation. Under mild conditions, the optimized engineered Pd/CN_0.25 catalyst exhibited high performance in both FA dehydrogenation (achieving almost full conversion, and a turnover frequency of 5530 h^?1 at 25 °C) and the reversible process of CO₂ hydrogenation into FA. This system can lead to a full carbon‐neutral energy cycle.     

Transition‐Metal‐Free Acceptorless Decarbonylation of Formic Acid Enabled by a Liquid Chemical‐Looping Strategy

The selective decarbonylation of formic acid was achieved under transition‐metal‐free conditions. Using a liquid chemical‐looping strategy, the thermodynamically favored dehydrogenation of formic acid was shut down, yielding a pure stream of CO with no H₂ or CO₂ contamination. The transformation involves a two‐step sequence where methanol is used as a recyclable looping agent to yield methylformate, which is subsequently decomposed to carbon monoxide using alkoxides as catalysts.     

High‐Rate,Tunable Syngas Production with Artificial Photosynthetic Cells

An artificial photosynthetic (APS) system consisting of a photoanodic semiconductor that harvests solar photons to split H₂O, a Ni‐SNG cathodic catalyst for the dark reaction of CO₂ reduction in a CO₂‐saturated NaHCO₃ solution, and a proton‐conducting membrane enabled syngas production from CO₂ and H₂O with solar‐to‐syngas energy‐conversion efficiency of up to 13.6 %. The syngas CO/H₂ ratio was tunable between 1:2 and 5:1. Integration of the APS system with photovoltaic cells led to an impressive overall quantum efficiency of 6.29 % for syngas production. The largest turnover frequency of 529.5 h^?1 was recorded with a photoanodic N‐TiO₂ nanorod array for highly stable CO production. The CO‐evolution rate reached a maximum of 154.9 mmol g^?1 h^?1 in the dark compartment of the APS cell. Scanning electrochemical–atomic force microscopy showed the localization of electrons on the single‐nickel‐atom sites of the Ni‐SNG catalyst, thus confirming that the multielectron reduction of CO₂ to CO was kinetically favored.     

Elemental Boron for Efficient Carbon Dioxide Reduction under Light Irradiation

The photoreduction of CO₂ is attractive for the production of renewable fuels and the mitigation of global warming. Herein, we report an efficient method for CO₂ reduction over elemental boron catalysts in the presence of only water and light irradiation through a photothermocatalytic process. Owing to its high solar‐light absorption and effective photothermal conversion, the illuminated boron catalyst experiences remarkable self‐heating. This process favors CO₂ activation and also induces localized boron hydrolysis to in situ produce H₂ as an active proton source and electron donor for CO₂ reduction as well as boron oxides as promoters of CO₂ adsorption. These synergistic effects, in combination with the unique catalytic properties of boron, are proposed to account for the efficiency of the CO₂ reduction. This study highlights the promise of photothermocatalytic strategies for CO₂ conversion and also opens new avenues towards the development of related solar‐energy utilization schemes.     

High‐Rate,Tunable Syngas Production with Artificial Photosynthetic Cells

An artificial photosynthetic (APS) system consisting of a photoanodic semiconductor that harvests solar photons to split H₂O, a Ni‐SNG cathodic catalyst for the dark reaction of CO₂ reduction in a CO₂‐saturated NaHCO₃ solution, and a proton‐conducting membrane enabled syngas production from CO₂ and H₂O with solar‐to‐syngas energy‐conversion efficiency of up to 13.6 %. The syngas CO/H₂ ratio was tunable between 1:2 and 5:1. Integration of the APS system with photovoltaic cells led to an impressive overall quantum efficiency of 6.29 % for syngas production. The largest turnover frequency of 529.5 h^?1 was recorded with a photoanodic N‐TiO₂ nanorod array for highly stable CO production. The CO‐evolution rate reached a maximum of 154.9 mmol g^?1 h^?1 in the dark compartment of the APS cell. Scanning electrochemical–atomic force microscopy showed the localization of electrons on the single‐nickel‐atom sites of the Ni‐SNG catalyst, thus confirming that the multielectron reduction of CO₂ to CO was kinetically favored.     

High Performance Fe Porphyrin/Ionic Liquid Co‐catalyst for Electrochemical CO2 Reduction

The efficient and selective catalytic reduction of CO₂ is a highly promising process for both of the storage of renewable energy as well as the production of valuable chemical feedstocks. In this work, we show that the addition of an ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate, in an aprotic electrolyte containing a proton source and FeTPP, promotes the in situ formation of the [Fe⁰TPP]^2? homogeneous catalyst at a less negative potential, resulting in lower overpotentials for the CO₂ reduction (670 mV) and increased kinetics of electron transfer. This co‐catalysis exhibits high Faradaic efficiency for CO production (93 %) and turnover number (2 740 000 after 4 hour electrolysis), with a four‐fold increase in turnover frequency (TOF) when compared with the standard system without the ionic liquid.     

Homogeneous Molecular Iron Catalysts for Direct Photocatalytic Conversion of Formic Acid to Syngas (CO+H2)

The catalytic decomposition of formic acid to generate syngas (a mixture of H₂ and CO) is a highly valuable strategy for energy conversion. Syngas can be used directly in internal combustion engines or can be converted to liquid fuels, meeting future energy challenges in a sustainable manner. Herein, we report the use of homogeneous molecular iron catalysts combined with a CdS nanorods (NRs) semiconductor to construct a highly efficient photocatalytic system for direct conversion of formic acid to syngas at room temperature and atmospheric pressure. Under optimal conditions, the photocatalytic system presents an activity of 150 mmol g_catalyst^?1 h^?1 towards H₂, and an apparent quantum yield (AQY) of 16.8 %, making it among the most active noble‐metal‐free photocatalytic systems for H₂ evolution from formic acid under visible light. Meanwhile, these iron‐based molecular catalysts also demonstrate remarkable enhancement in CO evolution with robust stability. The mechanistic role of the molecular catalyst is further investigated by using cyclic voltammetry, which suggests the formation of Fe^I species as the key step in the catalytic conversion of formic acid to syngas.     

Theoretical Efficiency Limits of Photoelectrochemical CO2 Reduction: A Route-Dependent Thermodynamic Analysis

Solar-fuel formation via photoelectrochemical (PEC) routes using water and CO₂ as feedstock has attracted much attention. Most PEC CO₂ reduction studies have been focused on the development of novel photoactive materials; however, there is still a lack of understanding of the key limiting factors of this process. In this study, the theoretical limits of Solar-to-Fuel (STF) efficiencies of single- and dual-junction photo-absorbing materials are illustrated for single-step multi-electron CO₂ reduction into fuels including HCOO⁻, CO, CH₃OH and C₂H₅OH. It is also highlighted that STF efficiency depends on the route of two-step PEC CO₂ reduction process using CH₃OH as a model fuel. Finally, it is illustrated the beneficial role of alternative strategies such as dual-junction photo-absorbing electrodes, externally applied bias and subsequent reactor chambers on the maximum theoretical efficiencies of PEC CO₂ reduction.     

Reversible Uptake of COS,CS2, and SO2: Ionic Liquids with O‐Alkylxanthate,O‐Alkylthiocarbonyl,and O‐Alkylsulfite Anions

CO₂‐binding organic liquids (CO₂BOLs) are mixtures of a base (typically an amidine or guanidine) and an alcohol, and have been shown to reversibly capture and release CO₂ with low reaction energies and high gravimetric CO₂ capacity. We now report the ability of such liquid blends to chemically bind and release other acid gases such as CS₂, COS, and SO₂ analogously to CO₂. These systems bind with sulfur‐containing acid gases to form colored ionic liquids with new O‐alkylxanthate, O‐alkylthiocarbonyl, and O‐alkylsulfite anions. The capture and thermal stripping of each acid gas from these systems and their applicability towards flue gas desulfurization is discussed.     

A Rechargeable Hydrogen Battery Based on Ru Catalysis

Apart from energy generation, the storage and liberation of energy are among the major problems in establishing a sustainable energy supply chain. Herein we report the development of a rechargeable H₂ battery which is based on the principle of the Ru‐catalyzed hydrogenation of CO₂ to formic acid (charging process) and the Ru‐catalyzed decomposition of formic acid to CO₂ and H₂ (discharging process). Both processes are driven by the same catalyst at elevated temperature either under pressure (charging process) or pressure‐free conditions (discharging process). Up to five charging–discharging cycles were performed without decrease of storage capacity. The resulting CO₂/H₂ mixture is free of CO and can be employed directly in fuel‐cell technology.     

Synergistic Interplay of Dual-Active-Sites on Metallic Ni-MOFs Loaded with Pt for Thermal-Photocatalytic Conversion of Atmospheric CO2 under Infrared Light Irradiation

Infrared light driven photocatalytic reduction of atmospheric CO₂ is challenging due to the ultralow concentration of CO₂ (0.04 %) and the low energy of infrared light. Herein, we develop a metallic nickel-based metal–organic framework loaded with Pt (Pt/Ni-MOF), which shows excellent activity for thermal-photocatalytic conversion of atmospheric CO₂ with H₂ even under infrared light irradiation. The open Ni sites are beneficial to capture and activate atmospheric CO₂, while the photogenerated electrons dominate H₂ dissociation on the Pt sites. Simultaneously, thermal energy results in spilling of the dissociated H₂ to Ni sites, where the adsorbed CO₂ is thermally reduced to CO and CH₄. The synergistic interplay of dual-active-sites renders Pt/Ni-MOF a record efficiency of 9.57 % at 940 nm for converting atmospheric CO₂, enables the procurement of CO₂ to be independent of the emission sources, and improves the energy efficiency for trace CO₂ conversion by eliminating the capture media regeneration and molecular CO₂ release.     

Exclusive Formation of Formic Acid from CO2 Electroreduction by a Tunable Pd‐Sn Alloy

Conversion of carbon dioxide (CO₂) into fuels and chemicals by electroreduction has attracted significant interest, although it suffers from a large overpotential and low selectivity. A Pd‐Sn alloy electrocatalyst was developed for the exclusive conversion of CO₂ into formic acid in an aqueous solution. This catalyst showed a nearly perfect faradaic efficiency toward formic acid formation at the very low overpotential of −0.26 V, where both CO formation and hydrogen evolution were completely suppressed. Density functional theory (DFT) calculations suggested that the formation of the key reaction intermediate HCOO* as well as the product formic acid was the most favorable over the Pd‐Sn alloy catalyst surface with an atomic composition of PdSnO₂, consistent with experiments.     

Reversible and Selective CO2 to HCO2− Electrocatalysis near the Thermodynamic Potential

Reversible catalysis is a hallmark of energy‐efficient chemical transformations, but can only be achieved if the changes in free energy of intermediate steps are minimized and the catalytic cycle is devoid of high transition‐state barriers. Using these criteria, we demonstrate reversible CO₂/HCO₂^? conversion catalyzed by [Pt(depe)₂]²⁺ (depe=1,2‐bis(diethylphosphino)ethane). Direct measurement of the free energies associated with each catalytic step correctly predicts a slight bias towards CO₂ reduction. We demonstrate how the experimentally measured free energy of each step directly contributes to the <50 mV overpotential. We also find that for CO₂ reduction, H₂ evolution is negligible and the Faradaic efficiency for HCO₂^? production is nearly quantitative. A free‐energy analysis reveals H₂ evolution is endergonic, providing a thermodynamic basis for highly selective CO₂ reduction.     

Imidazolium Ionic Liquids,Imidazolylidene Heterocyclic Carbenes,and Zeolitic Imidazolate Frameworks for CO2 Capture and Photochemical Reduction

Imidazolium ionic liquids (ILs), imidazolylidene N‐heterocyclic carbenes (NHCs), and zeolitic imidazolate frameworks (ZIFs) are imidazolate motifs which have been extensively investigated for CO₂ adsorption and conversion applications. Summarized in this minireview is the recent progress in the capture, activation, and photochemical reduction of CO₂ with these three imidazolate building blocks, from homogeneous molecular entities (ILs and NHCs) to heterogeneous crystalline scaffolds (ZIFs). The developments and existing shortcomings of the imidazolate motifs for their use in CO₂ utilizations is assessed, with more of focus on CO₂ photoredox catalysis. The opportunities and challenges of imidazolate scaffolds for future advancement of CO₂ photochemical conversion for artificial photosynthesis are discussed.     

Photoelectrochemical Reduction of Carbon Dioxide to Methanol through a Highly Efficient Enzyme Cascade

Natural photosynthesis is an effective route for the clean and sustainable conversion of CO₂ into high‐energy chemicals. Inspired by the natural process, a tandem photoelectrochemical (PEC) cell with an integrated enzyme‐cascade (TPIEC) system was designed, which transfers photogenerated electrons to a multienzyme cascade for the biocatalyzed reduction of CO₂ to methanol. A hematite photoanode and a bismuth ferrite photocathode were applied to fabricate the iron oxide based tandem PEC cell for visible‐light‐assisted regeneration of the nicotinamide cofactor (NADH). The cell utilized water as an electron donor and spontaneously regenerated NADH. To complete the TPIEC system, a superior three‐dehydrogenase cascade system was employed in the cathodic part of the PEC cell. Under applied bias, the TPIEC system achieved a high methanol conversion output of 220 μm h⁻¹, 1280 μmol g⁻¹ h⁻¹ using readily available solar energy and water.