Molecular Fluorescence Imaging Spectroscopy for Mapping Low Concentrations of Red Lake Pigments: Van Gogh's Painting The Olive Orchard

Vincent van Gogh used fugitive red lake pigments that have faded in some paintings. Mapping their distribution is key to understanding how his paintings have changed with time. While red lake pigments can be identified from microsamples, in situ identification and mapping remain challenging. This paper explores the ability of molecular fluorescence imaging spectroscopy to identify and, more importantly, map residual non‐degraded red lakes. The high sensitivity of this method enabled identification of the emission spectra of eosin (tetrabromine fluorescein) lake mixed with lead or zinc white at lower concentrations than elemental X‐ray fluorescence (XRF) spectroscopy used on account of bromine. The molecular fluorescence mapping of residual eosin and two carmine red lakes in van Gogh's The Olive Orchard is demonstrated and compared with XRF imaging spectroscopy. The red lakes are consistent with the composition of paint tubes known to have been used by van Gogh.     

In Situ Microfocus Chemical Computed Tomography of the Composition of a Single Catalyst Particle During Hydrogenation of Nitrobenzene in the Liquid Phase

Heterogeneous catalysis performed in the liquid phase is an important type of catalytic process which is rarely studied in situ. Using microfocus X‐ray fluorescence and X‐ray diffraction computed tomography (μ‐XRF‐CT, μ‐XRD‐CT) in combination with X‐ray absorption near‐edge spectroscopy (XANES), we have determined the active state of a Mo‐promoted Pt/C catalyst (NanoSelect) for the liquid‐phase hydrogenation of nitrobenzene under standard operating conditions. First, μ‐XRF‐CT and μ‐XRD‐CT reveal the active state of Pt catalyst to be reduced, noncrystalline, and evenly dispersed across the support surface. Second, imaging of the Pt and Mo distribution reveals they are highly stable on the support and not prone to leaching during the reaction. This study demonstrates the ability of chemical computed tomography to image the nature and spatial distribution of catalysts under reaction conditions.     

Complementary Standoff Chemical Imaging to Map and Identify Artist Materials in an Early Italian Renaissance Panel Painting

Two imaging modalities based on molecular and elemental spectroscopy were used to characterize a painting by Cosimo Tura. Visible‐to‐near‐infrared (400–1680 nm) reflectance imaging spectroscopy (RIS) and X‐ray fluorescence (XRF) imaging spectroscopy were employed to identify pigments and determine their spatial distribution with higher confidence than from either technique alone. For example, Mary’s red robe was modeled through the distribution of an insect‐derived red lake (RIS map) and lead white (XRF lead map), rather than a layer of red lake on vermilion. The RIS image cube was also used to isolate the preparatory design by mapping the reflectance spectra associated with it. In conjunction with results from an earlier RIS study (1650–2500 nm) to map and identify the binding media, a more thorough understanding was gained of the materials and techniques used in the painting.     

X‐ray Excited Optical Fluorescence and Diffraction Imaging of Reactivity and Crystallinity in a Zeolite Crystal: Crystallography and Molecular Spectroscopy in One

Structure–activity relationships in heterogeneous catalysis are challenging to be measured on a single‐particle level. For the first time, one X‐ray beam is used to determine the crystallographic structure and reactivity of a single zeolite crystal. The method generates μm‐resolved X‐ray diffraction (μ‐XRD) and X‐ray excited optical fluorescence (μ‐XEOF) maps of the crystallinity and Brønsted reactivity of a zeolite crystal previously reacted with a styrene probe molecule. The local gradients in chemical reactivity (derived from μ‐XEOF) were correlated with local crystallinity and framework Al content, determined by μ‐XRD. Two distinctly different types of fluorescent species formed selectively, depending on the local zeolite crystallinity. The results illustrate the potential of this approach to resolve the crystallographic structure of a porous material and its reactivity in one experiment via X‐ray induced fluorescence of organic molecules formed at the reactive centers.     

Development of a new total reflection X‐ray fluorescence instrument using polycapillary X‐ray lens

A new TXRF instrument combined with micro‐XRF analytical technique was proposed. An X‐ray micro‐beam was obtained by using a polycapillary X‐ray lens. The evaluated diameter of the X‐ray beam at the focal distance was 35 μm. In order to satisfy the total reflection condition of the present instrument, we attempted to cut the X‐ray micro‐beam above the critical angle of the total reflection with a slit. After the slit was applied, a clear critical angle could be observed. Using this proposed instrumental setup, we applied this to the analysis of a single particle on a flat Si substrate.     

Molecular Fluorescence Imaging Spectroscopy for Mapping Low Concentrations of Red Lake Pigments: Van Gogh's Painting The Olive Orchard

Vincent van Gogh used fugitive red lake pigments that have faded in some paintings. Mapping their distribution is key to understanding how his paintings have changed with time. While red lake pigments can be identified from microsamples, in situ identification and mapping remain challenging. This paper explores the ability of molecular fluorescence imaging spectroscopy to identify and, more importantly, map residual non-degraded red lakes. The high sensitivity of this method enabled identification of the emission spectra of eosin (tetrabromine fluorescein) lake mixed with lead or zinc white at lower concentrations than elemental X-ray fluorescence (XRF) spectroscopy used on account of bromine. The molecular fluorescence mapping of residual eosin and two carmine red lakes in van Gogh's The Olive Orchard is demonstrated and compared with XRF imaging spectroscopy. The red lakes are consistent with the composition of paint tubes known to have been used by van Gogh.     

Preparation,Characterization and Electrochemical Behavior of Pd‐Au Alloy Incorporated into Zeolites/Graphite Electrodes

The present article reports the preparation of Pd‐Au alloy incorporated into NaY zeolites layer via simple immersion technique. Pd‐Au particles were incorporated into zeolites cages via Co‐impregnation or alternate impregnation of metal ions. Cyclic voltammetry was used to evaluate the state of the modified electrodes in alkaline media. Surface morphology as well as elemental composition of the modified layer were examined using Scanning electron microscopy (SEM) and energy dispersive X‐ray (EDX).     

Unambiguous Intracellular Localization and Quantification of a Potent Iridium Anticancer Compound by Correlative 3D Cryo X‐Ray Imaging

The iridium half‐sandwich complex [Ir(η⁵:κ¹‐C₅Me₄CH₂py)(2‐phenylpyridine)]PF₆ is highly cytotoxic: 15–250× more potent than clinically used cisplatin in several cancer cell lines. We have developed a correlative 3D cryo X‐ray imaging approach to specifically localize and quantify iridium within the whole hydrated cell at nanometer resolution. By means of cryo soft X‐ray tomography (cryo‐SXT), which provides the cellular ultrastructure at 50 nm resolution, and cryo hard X‐ray fluorescence tomography (cryo‐XRF), which provides the elemental sensitivity with a 70 nm step size, we have located the iridium anticancer agent exclusively in the mitochondria. Our methodology provides unique information on the intracellular fate of the metallodrug, without chemical fixation, labeling, or mechanical manipulation of the cells. This cryo‐3D correlative imaging method can be applied to a number of biochemical processes for specific elemental localization within the native cellular landscape.     

Polyisobutylene containing organic/inorganic hybrid block copolymers and their crystalline behavior

Block copolymer comprising of polyisobutylene (PIB) soft segment and poly(3‐(3,5,7,9,11,13,15‐heptaisobutyl‐pentacyclo[9.5.1.1^3,9.1^5,15.1^7,13]‐octasiloxane‐1‐yl)propyl methacrylate) (PMAPOSS) hard segment was synthesized by combination of living carbocationic and reversible addition‐fragmentation chain transfer (RAFT) polymerizations. Block copolymers were characterized by ¹H and ²⁹Si NMR spectroscopy, FT‐IR study, energy dispersive X‐ray spectroscopy (EDX), and gel permeation chromatography (GPC). The EDX, combined with scanning electron microscopy (SEM) was employed for determination of elemental composition. Thermal transition and degradation behaviors were confirmed by differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA), respectively. Although both the PIB and MAPOSS homopolymers are amorphous in nature, in their block copolymers the PMAPOSS domain showed crystalline behavior, as confirmed from wide‐angle X‐ray scattering (WAXS) technique, DSC studies and polarized optical microscopy (POM). Interestingly, crystalline melting temperatures (T_m) can be tuned by changing the PIB to PMAPOSS block length ratios. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1125–1133     

Surface characterization of a cross‐linked cytochrome c film on cysteamine‐modified gold electrodes

The aim of the present paper is to characterize a cross‐linked horse heart cytochrome c (HHC) film on cysteamine‐modified gold electrodes. The HHC film was deposited using 1‐ethyl‐3‐(3‐dimethylaminopropyl)‐carbodiimide (EDC) as a coupling agent. Attenuated total reflection infrared (ATR‐IR) spectroscopic analyses were performed to characterize the newly formed surface on a qualitative and conformational level. The film thickness was measured using a noncontact optical surface profiler, while quantitative data and information on the heterogeneity of the film were obtained by means of synchrotron radiation X‐ray micro fluorescence (SR micro‐XRF). Results indicate that, in addition to electrochemical studies, spectroscopic analysis methods are essential to gain insight in the effect of immobilization strategies on protein conformations. The latter is of relevance in the development and optimization of biosensors. Copyright © 2009 John Wiley & Sons, Ltd.     

Operando XAFS Imaging of Distribution of Pt Cathode Catalysts in PEFC MEA

Three‐dimensional imaging using X‐ray as a probe is state‐of‐the‐art for the characterization of heterogeneous materials. In addition to simple imaging of sample morphology, imaging of elemental distribution and chemical states provides advanced maps of key structural parameters of functional materials. The combination of X‐ray absorption fine structure (XAFS) spectroscopy and three‐dimensional imaging such as computed tomography (CT) can visualize the three‐dimensional distribution of target elements, their valence states, and local structures in a non‐destructive manner. In this personal account, our recent results on the three‐dimensional XAFS imaging for Pt cathode catalysts in the membrane electrode assembly (MEA) of polymer electrolyte fuel cell (PEFC) are introduced. The distribution and chemical states of Pt cathode catalysts in MEAs remarkably change under PEFC operating conditions, and the 3D XAFS imaging revealed essential events in PEFC MEAs.     

Cluster TOF‐SIMS imaging of human skin remains: analysis of a South‐Andean mummy sample

A skin sample from a South‐Andean mummy dating back from the XI^th century was analyzed using time‐of‐flight secondary ion mass spectrometry imaging using cluster primary ion beams (cluster‐TOF‐SIMS). For the first time on a mummy, skin dermis and epidermis could be chemically differentiated using mass spectrometry imaging. Differences in amino‐acid composition between keratin and collagen, the two major proteins of skin tissue, could indeed be exploited. A surprising lipid composition of hypodermis was also revealed and seems to result from fatty acids damage by bacteria. Using cluster‐TOF‐SIMS imaging skills, traces of bio‐mineralization could be identified at the micrometer scale, especially formation of calcium phosphate at the skin surface. Mineral deposits at the surface were characterized using both scanning electron microscopy (SEM) in combination with energy‐dispersive X‐ray spectroscopy and mass spectrometry imaging. The stratigraphy of such a sample was revealed for the first time using this technique. More precise molecular maps were also recorded at higher spatial resolution, below 1 µm. This was achieved using a non‐bunched mode of the primary ion source, while keeping intact the mass resolution thanks to a delayed extraction of the secondary ions. Details from biological structure as can be seen on SEM images are observable on chemical maps at this sub‐micrometer scale. Thus, this work illustrates the interesting possibilities of chemical imaging by cluster‐TOF‐SIMS concerning ancient biological tissues. Copyright © 2012 John Wiley & Sons, Ltd.     

Engineering a Cu‐MOF Nano‐Catalyst by using Post‐Synthetic Modification for the Preparation of 5‐Substituted 1H‐Tetrazoles

A new nano scale Cu‐MOF has been obtained via post‐synthetic metalation by immersing a Zn‐MOF as a template in DMF solutions of copper(II) salts. The Cu‐MOF serves as recyclable nano‐catalyst for the preparation of 5‐substituted 1H‐tetrazoles via [3 + 2] cycloaddition reaction of various nitriles and sodium azide in a green medium (PEG). The post‐synthetic metalated MOF were characterized by FT‐IR spectroscopy, powder X‐ray diffraction (PXRD), atomic absorption spectroscopy (AAS), and energy dispersive X‐ray spectroscopy (EDX) techniques. The morphology and size of the nano‐catalyst were determined by field emission scanning electron microscopy (FE‐SEM).     

Synthesis and Characterization of Core‐Shell Selenium/Carbon Colloids and Hollow Carbon Capsules

A novel Se/C nanocomposite with core‐shell structures has been prepared through a facile one‐pot microwave‐induced hydrothermal process. The new material consists of a trigonal‐Se (t‐Se) core and an amorphous‐C (a‐C) shell. The Se/C composite can be converted to hollow carbon capsules by thermal treatment. These products were characterized by transmission electron microscopy (TEM), powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), selected area electron diffraction (SAED), energy‐dispersive X‐ray (EDX) spectroscopy, and X‐ray photoelectron spectroscopy (XPS).     

Functionalized graphene oxide supported copper (I) complex as effective and recyclable nanocatalyst for one‐pot three component synthesis of 1,2,3‐triazoles

Efficient, one pot three‐component reaction of alkyl halides, sodium azide with terminal alkynes can be catalyzed by functionalized graphene oxide with copper(I) under thermal conditions. A series of 1,4‐disubstituted 1,2,3‐triazoles were obtained by this one‐pot strategy. The catalyst was prepared and characterized by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), emission scanning electron microscopy (FE‐SEM) and energy dispersive X‐ray (EDX). The catalyst can be reused at least five times without significant deactivation.     

Using Non‐Destructive Analysis Techniques to Examine the Artworks of Taiwanese Artist Cheng‐Po Chen (1895‐1947)

This study employed the non‐destructive techniques to analyze and examine the artworks of the Taiwanese artist Cheng‐Po Chen (1895‐1947) for disclosing the damage to Chen's artworks and determine his creation habits. Ten pieces of artworks that required restoration were examined using ultraviolet examination techniques. Based on the differences in their fluorescence characteristics, various parts of these works were shown to have been retouched, thus, original and retouched regions were distinguished. Examining these works using Infrared instrument revealed that Chen did not use charcoal to prepare drafts, and he directly applied oil paint to the canvases. Subsequently, these two examination techniques were adopted to examine sketches. The results showed that residues imprinted on them cause of storage methods were organic materials from charcoal and not carbon granules. The X‐ray examination identified numerous creations beneath the surface of several artworks. The X‐ray fluorescence spectrometer was used for elemental analysis of the pigments. The results corresponded with the pigments listed in Chen's purchase form, thus, we summarized the composition of palettes used by Chen. In general, this study acquired a considerable amount of information from the pigment examinations and established a database of the pigments that Chen commonly employed in his artworks.     

4,5‐Imidazoledicarboxylic acid immobilized on Fe3O4 magnetic nanoparticles: Preparation,characterization, and application as a recyclable and efficient nanocatalyst in the sonochemical condensation reaction

A green synthesis of benzimidazole derivatives using recyclable magnetic 4,5‐imidazoledicarboxylic is described. The magnetic 4,5‐imidazoledicarboxylic (Fe₃O₄@ImDCA) nanocatalyst was characterized completely by infrared spectroscopy (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), scanning electron microscopy (SEM), and powder X‐ray diffraction (XRD), and benzimidazoles were characterized by their melting points, FT‐IR, and ¹H NMR. The current approach provides a number of advantages in terms of high yields, low reaction times, the use of green media, and easy work‐up.     

Photosensitivity of CuBiSe2 Thin Film Deposited by Vacuum Evaporation Technique

CuBiSe₂ (CBSe) thin film was prepared by vacuum evaporation. The deposited film was characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), energy dispersive X‐ray (EDX), UV–visible specroscopy, and I–V analysis. XRD analysis indicates the formation of cubic CBSe thin film, and the corresponding EDX spectrum confirms the stoichiometry composition of CBSe. In the AFM images, the majority of the particles are granular, and the surface roughness is 8.86 nm. The optical absorption coefficient is >10⁴ in the visible region and the bandgap energy is calculated to be 1.84 eV. The photosensitivity of the film is 181%.     

Zn3(BTC)2 as a Highly Efficient Reusable Catalyst for the Synthesis of 2‐Aryl‐1H‐Benzimidazole

Zn₃(BTC)₂ metal‐organic frameworks as recyclable and heterogeneous catalysts were effectively used to catalyze the synthesis of benzimidazole derivatives from o‐phenylendiamine and aldehydes in ethanol. This method provides 2‐aryl‐1H‐benzimidazoles in good to excellent yields with little catalyst loading. The catalyst was characterized using different techniques such as X‐ray diffraction (XRD), energy dispersive X‐ray (EDX) analysis, scanning electron microscopy (SEM), and Fourier transform infrared (FT‐IR) spectroscopy.     

Synthesis,characterization and application of nano‐CoAl2O4 as an efficient catalyst in the preparation of hexahydroquinolines

In this work, nano‐CoAl₂O₄ was prepared and characterized by FT‐IR, energy dispersive X‐ray analysis (EDX), X‐ray diffraction patterns (XRD), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM) and transmission electron microscopy (TEM). Nano‐CoAl₂O₄ was applied for the synthesis of hexahydroquinoline derivatives by the condensation reaction between ethyl acetoacetate, dimedone and various aldehydes. These reactions were carried out at 80 °C under solvent‐free conditions.