Size‐Dependence of the Activity of Gold Nanoparticle‐Loaded Titanium(IV) Oxide Plasmonic Photocatalyst for Water Oxidation

Mesoporous TiO₂ nanocrystalline film was formed on fluorine‐doped tin oxide electrode (TiO₂/FTO) and gold nanoparticles (NPs) of different sizes were loaded onto the surface with the loading amount kept constant (Au/TiO₂/FTO). Visible‐light irradiation (λ>430 nm) of the Au/TiO₂/FTO photoanode in a photoelectrochemical cell with the structure of photoanode|0.1 m NaClO4 aqueous solution|Ag/AgCl (reference electrode)|glassy carbon (cathode) leads to the oxidation of water to oxygen (O₂). We show that the visible‐light activity of the Au/TiO₂/FTO anode increases with a decrease in Au particle size (d) at 2.9≤d≤11.9 nm due to the enhancement of the charge separation and increasing photoelectrocatalytic activity.     

掺杂纳米金粒子的火焰氧化TiO2膜的光电化学性质的研究

A nano-Au modified TiO2 electrode was prepared via the oxidation of Ti sheet in flame and subsequent modification with gold nanoparticles. The results of SEM and TEM measurements show that the Au nanoparticles are well dispersed on TiO2 surface. A near 2-fold enhancement in photocurrent was achieved upon the modification with Au nanoparticles. From the results of photocurrent and electrochemical impedance experiments it was found that the flatband potential of nano-Au/TiO2 electrode negatively shifted about 100 mV in 0.5 mol/L Na2SO4 solutions compared with that of bare TiO2 electrode. The improvement of photoelectrochemical performance was explained by the inhibition for charge recombination of photo-induced electrons and holes, and the promotion for interracial charge-transfer kinetics at nano-Au/TiO2 composite film. Such nanometal-semiconductor composite films have the potential application in improving the performance of photoelectrochemical solar cells.     

Multiple plasmonic effect on photocurrent generation of metal‐loaded titanium dioxide composite/dye films on gold grating surface

We demonstrate the multiple plasmonic effect on the photocurrent properties of photoanodes containing Ag or Au nanoparticles (NPs) loaded onto titanium dioxide film (Ag–TiO₂ or Au–TiO₂) on Au grating surfaces. Ag–TiO₂ or Au–TiO₂ nanocomposite particles are prepared by a flame spray pyrolysis route. The structures and morphologies of the prepared products are characterized by high‐resolution transmission electron microscopy. The Ag–TiO₂ or Au–TiO₂ composite NPs are deposited by spin coating onto the Au grating surfaces. The photoanode electrode is a layered structure of blu‐ray disc‐recordable grating substrate/Au/Ag (or Au)–TiO₂/dye/electrolyte/indium‐tin oxide. The plasmonic effect is induced when Ag or Au NPs are located within the propagating surface plasmon (SP) field on the Au grating surface. The short‐circuit photocurrent is increased by exciting the grating‐coupled propagating SP on the Au gratings and is further enhanced by positioning the Ag or Au NPs within the grating‐coupled SP field. Copyright © 2014 John Wiley & Sons, Ltd.     

CdSeTe@CdS@ZnS Quantum‐Dot‐Sensitized Macroporous Tio2 Film: A Multisignal‐Amplified Photoelectrochemical Platform

A macroporous TiO₂ film (M‐TiO₂), which was prepared by burning off the polystyrene microsphere (PS) template from a PS/TiO₂ composite film, can provide a large active surface, improve electron‐transport performance, and increase the photocurrent. Furthermore, core–shell–shell CdSeTe@CdS@ZnS quantum dots (QDs) were introduced to sensitize the M‐TiO₂ film, which can efficiently broaden the absorption spectra range, separate and transfer charge carriers, reduce recombination loss, and improve photovoltaic response, with a sensitization shell of CdS and a passivation shell of ZnS. A multisignal‐amplified photoelectrochemical platform was fabricated by further modifying this film with a combination of biotin–DEVD–peptide (Biotin–Gly–Asp–Gly–Asp–Glu–Val–Asp–Gly–Cys) (which is specifically cleaved by caspase‐3) and streptavidin‐labeled alkaline phosphatase (SA‐ALP). Under the enzymatic catalysis of ALP with the substrate 2‐phospho‐L ‐ascorbic acid trisodium salt (AAP), ascorbic acid (AA) was generated as a better electron donor, leading to increased photocurrent output. The activity of caspase‐3, which depends on the amount of residual peptide on the electrode, was inversely proportional to the amount of AA. By monitoring the variation of photocurrent caused by AA, caspase‐3 activity and the therapeutic effect of nilotinib (a special medicine of chronic myeloid leukemia, CML) were indirectly detected and evaluated. The photoelectrochemical platform can be used as a potential evaluation system for monitoring caspase‐3 activity and drug effects.     

Visible‐Light‐Induced Electron Transport from Small to Large Nanoparticles in Bimodal Gold Nanoparticle‐Loaded Titanium(IV) Oxide

A key to realizing the sustainable society is to develop highly active photocatalysts for selective organic synthesis effectively using sunlight as the energy source. Recently, metal‐oxide‐supported gold nanoparticles (NPs) have emerged as a new type of visible‐light photocatalysts driven by the excitation of localized surface plasmon resonance of Au NPs. Here we show that visible‐light irradiation (λ>430 nm) of TiO₂‐supported Au NPs with a bimodal size distribution (BM‐Au/TiO₂) gives rise to the long‐range (>40 nm) electron transport from about 14 small (ca. 2 nm) Au NPs to one large (ca. 9 nm) Au NP through the conduction band of TiO₂. As a result of the enhancement of charge separation, BM‐Au/TiO₂ exhibits a high level of visible‐light activity for the one‐step synthesis of azobenzenes from nitrobenzenes at 25 °C with a yield greater than 95 % and a selectivity greater than 99 %, whereas unimodal Au/TiO₂ (UM‐Au/TiO₂) is photocatalytically inactive.     

Single‐Nanoparticle Photoelectrochemistry at a Nanoparticulate TiO2‐Filmed Ultramicroelectrode

An ultrasensitive photoelectrochemical method for achieving real‐time detection of single nanoparticle collision events is presented. Using a micrometer‐thick nanoparticulate TiO₂‐filmed Au ultra‐microelectrode (TiO₂@Au UME), a sub‐millisecond photocurrent transient was observed for an individual N719‐tagged TiO₂ (N719@TiO₂) nanoparticle and is due to the instantaneous collision process. Owing to a trap‐limited electron diffusion process as the rate‐limiting step, a random three‐dimensional diffusion model was developed to simulate electron transport dynamics in TiO₂ film. The combination of theoretical simulation and high‐resolution photocurrent measurement allow electron‐transfer information of a single N719@TiO₂ nanoparticle to be quantified at single‐molecule accuracy and the electron diffusivity and the electron‐collection efficiency of TiO₂@Au UME to be estimated. This method provides a test for studies of photoinduced electron transfer at the single‐nanoparticle level.     

Gold‐Nanoparticle‐Loaded Carbonate‐Modified Titanium(IV) Oxide Surface: Visible‐Light‐Driven Formation of Hydrogen Peroxide from Oxygen

Gold nanoparticle‐loaded rutile TiO₂ with a bimodal size distribution around 10.6 nm and 2.3 nm (BM‐Au/TiO₂) was prepared by the deposition precipitation and chemical reduction (DP‐CR) technique. Visible‐light irradiation (λ>430 nm) of the BM‐Au/TiO₂ plasmonic photocatalyst yields 35 μm H₂O₂ in aerated pure water at irradiation time (t_p)=1 h, and the H₂O₂ concentration increases to 640±60 μm by the addition of 4 % HCOOH as a sacrificing electron donor. Further, a carbonate‐modified surface BM‐Au/TiO₂ (BM‐Au/TiO₂‐CO₃^2?) generates a millimolar level of H₂O₂ at t_p=1 h with a quantum efficiency (Φ) of 5.4 % at λ=530 nm under the same conditions. The recycle experiments confirmed the stable performance of BM‐Au/TiO₂.     

Three‐Dimensional Ordered Assembly of Thin‐Shell Au/TiO2 Hollow Nanospheres for Enhanced Visible‐Light‐Driven Photocatalysis

An Au/TiO₂ nanostructure was constructed to obtain a highly efficient visible‐light‐driven photocatalyst. The design was based on a three‐dimensional ordered assembly of thin‐shell Au/TiO₂ hollow nanospheres (Au/TiO₂‐3 DHNSs). The designed photocatalysts exhibit not only a very high surface area but also photonic behavior and multiple light scattering, which significantly enhances visible‐light absorption. Thus Au/TiO₂‐3 DHNSs exhibit a visible‐light‐driven photocatalytic activity that is several times higher than conventional Au/TiO₂ nanopowders.     

Enhancing the Performance of Dye‐Sensitized Solar Cells with a Gold‐Nanoflowers Box

To improve the electron collection, electron lifetime, and light‐harvesting efficiency of dye‐sensitized solar cells simultaneously, Au nanoflowers were prepared and used to cover the entire TiO₂ film. Deposition of Au nanoflowers around the TiO₂ film formed a light‐scattering “box” that covered the entire TiO₂ film. Compared with a light‐scattering layer that only covers the top surface of TiO₂, the Au‐nanoflowers box exhibited better light‐harvesting efficiency due to omnidirectional light scattering, faster electron transport (attributed to the formation of electron channels between the metallic Au nanoflowers and the electron‐collection electrode), and slower charge recombination. As a consequence, the short‐circuit photocurrent and open‐circuit photovoltage were both enhanced significantly, which improved the power conversion efficiency from 8.12 to 10.91 % (34 %) when an Au‐nanoflowers box was wrapped around the photoanode.     

A photoelectrochemical immunosensor based on Au-doped TiO2 nanotube arrays for the detection of α-synuclein

α‐Synuclein (α‐SYN) is a very important neuronal protein that is associated with Parkinson’s disease. In this paper, we utilized Au‐doped TiO₂ nanotube arrays to design a photoelectrochemical immunosensor for the detection of α‐SYN. The highly ordered TiO₂ nanotubes were fabricated by using an electrochemical anodization technique on pure Ti foil. After that, a photoelectrochemical deposition method was exploited to modify the resulting nanotubes with Au nanoparticles, which have been demonstrated to facilitate the improvement of photocurrent responses. Moreover, the Au‐doped TiO₂ nanotubes formed effective antibody immobilization arrays and immobilized primary antibodies (Ab₁) with high stability and bioactivity to bind target α‐SYN. The enhanced sensitivity was obtained by using {Ab₂‐Au‐GOx} bioconjugates, which featured secondary antibody (Ab₂) and glucose oxidase (GOx) labels linked to Au nanoparticles for signal amplification. The GOx enzyme immobilized on the prepared immunosensor could catalyze glucose in the detection solution to produce H₂O₂, which acted as a sacrificial electron donor to scavenge the photogenerated holes in the valence band of TiO₂ nanotubes upon irradiation of the other side of the Ti foil and led to a prompt photocurrent. The photocurrents were proportional to the α‐SYN concentrations, and the linear range of the developed immunosensor was from 50 pg mL^?1 to 100 ng mL^?1 with a detection limit of 34 pg mL^?1. The proposed method showed high sensitivity, stability, reproducibility, and could become a promising technique for protein detection.     

A Photoelectrochemical Biosensor Fabricated using Hierarchically Structured Gold Nanoparticle and MoS2 on Tannic Acid Templated Mesoporous TiO2

In a tannic acid assisted synthesis of mesoporous TiO₂, tannic acid was used as a cost effective and non‐toxic template for pore formation. Meanwhile, a gold nanoparticles (Au NPs) deposited TiO₂ nanocomposite was coated on an indium tin oxide electrode for the fabrication of a photoelectrochemical (PEC) biosensing system. Upon the formation of anatase structure, the electrode was coated with MoS₂ for effective visible light absorption. The mesoporous structure led to an enhanced surface area by improving Au NPs and glucose oxidase adsorption. Incorporation of Au NPs led to an enhanced photonic efficiency due to the generation of Schottky barriers. The obtained nanocomposite was used for the light‐driven, real‐time, and selective PEC glucose sensing. Under visible light irradiation, the enzyme immobilized electrodes yielded significant photocurrent improvement owing to the releasing electron donor H₂O₂. The obtained PEC biosensor demonstrated acceptable reproducibility and stability with a sensitivity of 4.42 μA mM^?1 cm^?2 and a low detection limit of 1.2 μM glucose. Also, the linear measurement range was found to be 0.004–1.75 mM glucose. The results indicated that the proposed production method of mesoporous TiO₂ will pave the way for a green chemistry based porous material production, along with the extension of the implementation of semiconductors in PEC biosensing systems.     

Enhancement of Solar Hydrogen Evolution from Water by Surface Modification with CdS and TiO2 on Porous CuInS2 Photocathodes Prepared by an Electrodeposition–Sulfurization Method

Porous films of p‐type CuInS₂, prepared by sulfurization of electrodeposited metals, are surface‐modified with thin layers of CdS and TiO₂. This specific porous electrode evolved H₂ from photoelectrochemical water reduction under simulated sunlight. Modification with thin n‐type CdS and TiO₂ layers significantly increased the cathodic photocurrent and onset potential through the formation of a p–n junction on the surface. The modified photocathodes showed a relatively high efficiency and stable H₂ production under the present reaction conditions.     

Synthesis and Study of Plasmon‐Induced Carrier Behavior at Ag/TiO2 Nanowires

Nanocomposites of Ag/TiO₂ nanowires with enhanced photoelectrochemical performance have been prepared by a facile solvothermal synthesis of TiO₂ nanowires and subsequent photoreduction of Ag⁺ ions to Ag nanoparticles (AgNPs) on the TiO₂ nanowires. The as‐prepared nanocomposites exhibited significantly improved cathodic photocurrent responses under visible‐light illumination, which is attributed to the local electric field enhancement of plasmon resonance effect near the TiO₂ surface rather than by the direct transfer of charge between the two materials. The visible‐light‐driven photocatalytic performance of these nanocomposites in the degradation of methylene blue dye was also studied, and the observed improvement in photocatalytic activity is associated with the extended light absorption range and efficient charge separation due to surface plasmon resonance effect of AgNPs.     

Effect of Cl− anions on photocatalytic decomposition of gaseous ozone over Au @ Ag/TiO2 catalyst

Au core Ag shell composite structure nanoparticles were prepared using a sol method. The Au core Ag shell composite nanoparticles were loaded on TiO₂ nanoparticles as support using a modified powder–sol method, enabling the generation of Au @ Ag/TiO₂ photocatalysts for photocatalytic decomposition and elimination of ozone. The sols were characterized by means of ultraviolet–visible light (UV–Vis) reflection spectrometry, X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). The activity of the Au @ Ag/TiO₂ photocatalysts for photocatalytic decomposition and elimination of ozone was evaluated and the effect of Cl^? anions on the photocatalytic activity of the catalysts was highlighted. Results showed that Au @ Ag/TiO₂ prepared via the modified powder–sol route in the presence of an appropriate amount of NaCl solid as demulsifier had better activity in the photocatalytic decomposition and elimination of ozone. At the same time, Au @ Ag/TiO₂ catalysts had better ability to resist poisonous Cl^? anions than conventional Au/TiO₂ catalyst. The reasons could be, first, that NaCl was capable of reducing the concentration of free Ag⁺ by adsorption on the surface of Ag particles forming AgCl and enhancing the formation of Au core Ag shell particles, leading to a better resistance to Cl^? anions of the catalysts, and, second, AgCl took part in the photocatalytic decomposition of ozone together with Au @ Ag/TiO₂ catalysts and had a synergistic effect on the latter, resulting in better photocatalytic activity of Au @ Ag/TiO₂ catalysts.     

Uniformly Dispersed and Controllable Ligand‐Free Silver‐Nanoparticle‐Decorated TiO2 Nanotube Arrays with Enhanced Photoelectrochemical Behaviors

Homogeneously dispersed silver nanoparticles (AgNPs) were successfully decorated onto the surface of TiO₂ nanotube arrays (TNTA) by means of an in situ photoreduction method. TNTA films as supports exhibit excellent properties to prevent agglomeration of AgNPs, and they also avoid using polymer ligands, which is deleterious to enhancing the properties of the fabricated NPs. The silver particle size and its content could be controlled just by changing the immersion time. Detailed SEM and TEM analyses combined with energy‐dispersive X‐ray spectroscopy analyses with different immersion times (5, 10, 30, 60 min) have revealed the variation tendency. The prepared Ag/TNTA composite films were also characterized by XRD, X‐ray photoelectron spectroscopy, and high‐resolution TEM. The UV/Vis diffuse reflectance spectra displayed a redshift of the absorption peak with the growth of AgNPs. The photocurrent response and the photoelectrocatalytic degradation of methyl orange (MO) were used to evaluate the photoelectrochemical properties of the fabricated samples. The results showed that the photocurrent response and photoelectrocatalytic activity largely depended on the loaded Ag particle size and content. TNTA films with a diameter of 17.92 nm and silver content of 1.15 at % showed the highest photocurrent response and degradation rate of MO. The enhanced properties could be attributed to the synergistic effect between AgNPs and TiO₂. To make good use of this effect, particle size and silver content should be well controlled to develop the electron charge and discharge process during the photoelectrical process. Neither smaller nor larger AgNPs caused decreased photoelectrical properties.     

Axis‐Oriented,Continuous Anatase Titania Films with Exposed Reactive {100} Facets

Homogeneous TiO₂ single crystals with high exposure of {100} reactive facets were constructed as a seed monolayer on transparent conductive substrates with the desired orientation of reactive facets. A secondary growth process was subsequently carried out on the monolayer seed film to form an axis‐oriented continuous reactive film. Performing secondary growth with different precursors led to optimized conditions for high‐performance photoelectrochemical activity of anatase TiO₂ films. Experimental techniques such as UV/Vis absorption spectroscopy, X‐ray diffraction, high‐resolution SEM, and photoelectrochemistry were used to characterize the structural, optical, and photoelectrochemical properties of the as‐synthesized films. As a photoanode in a photoelectrochemical cell, the axis‐oriented reactive film shows a maximum photocurrent density of 0.3 mA cm^?2, as opposed to 0.075 mA cm^?2 for non‐axis‐oriented (randomly oriented) TiO₂ film.     

Constructing Ordered Three‐Dimensional TiO2 Channels for Enhanced Visible‐Light Photocatalytic Performance in CO2 Conversion Induced by Au Nanoparticles

As a typical photocatalyst for CO₂ reduction, practical applications of TiO₂ still suffer from low photocatalytic efficiency and limited visible‐light absorption. Herein, a novel Au‐nanoparticle (NP)‐decorated ordered mesoporous TiO₂ (OMT) composite (OMT‐Au) was successfully fabricated, in which Au NPs were uniformly dispersed on the OMT. Due to the surface plasmon resonance (SPR) effect derived from the excited Au NPs, the TiO₂ shows high photocatalytic performance for CO₂ reduction under visible light. The ordered mesoporous TiO₂ exhibits superior material and structure, with a high surface area that offers more catalytically active sites. More importantly, the three‐dimensional transport channels ensure the smooth flow of gas molecules, highly efficient CO₂ adsorption, and the fast and steady transmission of hot electrons excited from the Au NPs, which lead to a further improvement in the photocatalytic performance. These results highlight the possibility of improving the photocatalysis for CO₂ reduction under visible light by constructing OMT‐based Au‐SPR‐induced photocatalysts.     

低温吸附制备Au-TiO2复合薄膜及其光电化学性质

在低温条件下将预先合成的Au溶胶吸附到TiO₂薄膜上以制备纳米Au-TiO₂复合薄膜,以超高分辨率场发射扫描电镜(FESEM)、X射线衍射(XRD)及X射线光电子能谱(XPS)表征Au-TiO₂膜,并在UV辐照下测定了Au-TiO₂薄膜电极的光电化学性质。纳米Au呈金属态,平均粒径为(4.3±1.2) nm,负载量高,均匀地沉积于TiO₂薄膜表面。光电化学测试表明,沉积纳米Au后,TiO₂电极的光生电流提高近5倍,光生电压明显向负值增大,说明纳米Au可增强光生载流子的分离效率,促进电荷在电极与溶液界面间的转移。Au-TiO₂电极的电荷传递法拉第阻抗(R_ct)是TiO₂电极的一半,说明负载的纳米Au粒抑制了光生电子-空穴的复合,提高了电极中载流子浓度。     

Enhancing Electron Collection Efficiency and Effective Diffusion Length in Dye‐Sensitized Solar Cells

Intensity‐modulated photocurrent spectroscopy and intensity‐modulated photovoltage spectroscopy are employed to measure the dynamics of electron transport and recombination in the ZnO nanowire (NW) array‐ZnO/layered basic zinc acetate (LBZA) nanoparticle (NP) composite dye‐sensitized solar cells (DSSCs). The roles of the vertical ZnO NWs and insulating LBZA in the electron collection and transport in DSSCs are investigated by comparing the results to those in the TiO₂–NP, horizontal TiO₂–NW and vertical ZnO–NW‐array DSSCs. The electron transport rate and electron lifetime in the ZnO NW/NP composite DSSC are superior to those in the conventional TiO₂–NP cell due to the existence of the vertical ZnO NWs and insulating LBZA. It indicates that the ZnO NW/NP composite anode is able to sustain efficient electron collection over much greater thickness than the TiO₂–NP cell does. Consequently, a larger effective electron diffusion length is available in the ZnO composite DSSC.     

Sensitization of Mn with CdS nanoparticles via electrochemical deposition technique for photocurrent enhancement of nanomaterial’s-sensitized photoelectrochemical cells

A photoconversion efficiency of 2.12% was obtained under visible light illumination by nanostructure-sensitized photoelectrochemical cells using Mn/CdS as sensitizer loaded on TiO₂ nanotube arrays (NTAs) (Mn/CdS/TiO₂). Sensitization of Mn on CdS nanoparticles pre-loaded on TiO₂ NTAs was carried out by a two-step electrodeposition method. Compared with unsensitized TiO₂ NTAs, the photocurrent had increased from 0.03 to 4.12 for Mn/CdS/TiO₂ prepared at 1 min. The effects of deposited Mn on the physical, chemical, and photoelectrochemical properties of the CdS/TiO₂ NTAs nanostructure were investigated by using UV–visible diffuse reflectance spectroscopy, X-ray diffractometry, and field-emission scanning electron microscopy coupled with energy dispersive X-ray spectroscopy. The photoelectrochemical analysis was examined in a three-electrode system under a halogen illumination by using the prepared film as the photo-anode.