Lanthanide Metal–Organic Framework Microrods: Colored Optical Waveguides and Chiral Polarized Emission

Lanthanide metal–organic frameworks (Ln-MOFs) have received much attention owing to their structural tunability and widely photofunctional applications. However, successful examples of Ln-MOFs with well-defined photonic performances at micro-/nanometer size are still quite limited. Herein, self-assemblies of 1,3,5-benzenetricarboxylic acid (BTC) and lanthanide ions afford isostructural crystalline Ln-MOFs. Tb-BTC, Eu@Tb-BTC, and Eu-BTC have 1D microrod morphologies, high photoluminescence (PL) quantum yields, and different emission colors (green, orange, and red). Spatially PL resolved spectra confirm that Ln-MOF microrods exhibit an optical waveguide effect with low waveguide loss coefficient (0.012≈0.033 dB μm⁻¹) during propagation. Furthermore, these microrods feature both linear and chiral polarized photoemission with high anisotropy.     

Controllable Synthesis of Porphyrin‐Based 2D Lanthanide Metal–Organic Frameworks with Thickness‐ and Metal‐Node‐Dependent Photocatalytic Performance

Synthesizing 2D metal–organic frameworks (2D MOFs) in high yields and rational tailoring of the properties in a predictable manner for specific applications is extremely challenging. Now, a series of porphyrin‐based 2D lanthanide MOFs (Ln‐TCPP, Ln=Ce, Sm, Eu, Tb, Yb, TCPP=tetrakis(4‐carboxyphenyl) porphyrin) with different thickness were successfully prepared in a household microwave oven. The as‐prepared 2D Ln‐TCPP nanosheets showed thickness‐dependent photocatalytic performances towards photooxidation of 1,5‐dihydroxynaphthalene (1,5‐DHN) to synthesize juglone. Particularly, the Yb‐TCPP displayed outstanding photodynamic activity to generate O₂^? and ¹O₂. This work not only provides fundamental insights into structure designing and property tailoring of 2D MOFs nanosheets, but also pave a new way to improve the photocatalytic performance.     

A Terbium Metal–Organic Framework for Highly Selective and Sensitive Luminescence Sensing of Hg2+ Ions in Aqueous Solution

A series of isomorphic lanthanide metal–organic frameworks (MOFs) Ln(TATAB)?(DMF)₄(H₂O)(MeOH)_0.5 (LnTATAB, Ln=Eu, Tb, Sm, Dy, Gd; H₃TATAB=4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoic acid) have been solvothermally synthesized and structurally characterized. Among these MOFs, TbTATAB exhibits good water stability and a high fluorescence quantum yield. Because mercury ions (Hg²⁺) have a high affinity to nitrogen atoms, and the space between multiple nitrogen atoms from triazine and imino groups is suitable for interacting with Hg²⁺ ions, TbTATAB shows highly selective and sensitive detection of Hg²⁺ in aqueous solution with a detection limit of 4.4 nm . Furthermore, it was successfully applied to detect Hg²⁺ ions in natural water samples.     

Luminescence Tuning and White‐Light Emission of Co‐doped Ln–Cd–Organic Frameworks

Four new three‐dimensional isostructural lanthanide–cadmium metal–organic frameworks (Ln–Cd MOFs), [LnCd₂(imdc)₂(Ac)(H₂O)₂]?H₂O (Ln=Pr ( 1 ), Eu ( 2 ), Gd ( 3 ), and Tb ( 4 ); H₃imdc=4,5‐imidazoledicarboxylic acid; Ac=acetate), have been synthesized under hydrothermal conditions and characterized by IR, elemental analyses, inductively coupled plasma (ICP) analysis, and X‐ray diffraction. Single‐crystal X‐ray diffraction shows that two Ln^III ions are surrounded by four Cd^II ions to form a heteronuclear building block. The blocks are further linked to form 3D Ln–Cd MOFs by the bridging imdc^3? ligand. Furthermore, the left‐ and right‐handed helices array alternatively in the lattice. Eu–Cd and Tb–Cd MOFs can emit characteristic red light with the Eu^III ion and green light with the Tb^III ion, respectively, while both Gd–Cd and Pr–Cd MOFs generate blue emission when they are excited. Different concentrations of Eu³⁺ and Tb³⁺ ions were co‐doped into Gd–Cd/Pr–Cd MOFs, and tunable luminescence from yellow to white was achieved. White‐light emission was obtained successfully by adjusting the excitation wavelength or the co‐doping ratio of the co‐doped Gd–Cd and Pr–Cd MOFs. These results show that the relative emission intensity of white light for Gd–Cd:Eu³⁺,Tb³⁺ MOFs is stronger than that of Pr–Cd:Eu³⁺,Tb³⁺ MOFs, which implies that the Gd complex is a better matrix than the Pr complex to obtain white‐light emission materials.     

The Series of Rare Earth Complexes [Ln2Cl6(μ‐4,4′‐bipy)(py)6], Ln=Y,Pr, Nd,Sm‐Yb: A Molecular Model System for Luminescence Properties in MOFs Based on LnCl3 and 4,4′‐Bipyridine

A series of 12 dinuclear complexes [Ln₂Cl₆(μ‐4,4′‐bipy)(py)₆], Ln=Y, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, ( 1 – 12 , respectively) was synthesized by an anhydrous solvothermal reaction in pyridine. The complexes contain a 4,4′‐bipyridine bridge and exhibit a coordination sphere closely related to luminescent lanthanide MOFs based on LnCl₃ and 4,4‐bipyridine. The dinuclear complexes therefore function as a molecular model system to provide a better understanding of the luminescence mechanisms in the Ln‐N‐MOFs ${\hbox{}{{\hfill 2\atop \hfill \infty }}}$ [Ln₂Cl₆(4,4′‐bipy)₃] ? 2(4,4′‐bipy). Accordingly, the luminescence properties of the complexes with Ln=Y, Sm, Eu, Gd, Tb, Dy, ( 1 , 4 – 8 ) were determined, showing an antenna effect through a ligand–metal energy transfer. The highest efficiency of luminescence is observed for the terbium‐based compound 7 displaying a high quantum yield (QY of 86 %). Excitation with UV light reveals typical emission colors of lanthanide‐dependent intra 4f–4f‐transition emissions in the visible range (Tb^III: green, Eu^III: red, Sm^III: salmon red, Dy^III: yellow). For the Gd^III‐ and Y^III‐containing compounds 6 and 1 , blue emission based on triplet phosphorescence is observed. Furthermore, ligand‐to‐metal charge‐transfer (LMCT) states, based on the interaction of Cl^? with Eu^III, were observed for the Eu^III compound 5 including energy‐transfer processes to the Eu^III ion. Altogether, the model complexes give further insights into the luminescence of the related MOFs, for example, rationalization of Ln‐independent quantum yields in the related MOFs.     

Crystal‐Field Tuning of Photoluminescence in Two‐Dimensional Materials with Embedded Lanthanide Ions

Lanthanide (Ln) group elements have been attracting considerable attention owing to the distinct optical properties. The crystal‐field surroundings of Ln ions in the host materials can determine their energy level splitting, which is of vital importance to tailor their optical properties. 2D MoS₂ single crystals were utilized as the host material to embed Eu³⁺ and energy‐level splitting was achieved for tuning its photoluminescence (PL). The high anisotropy of the 2D host materials makes them distort the degenerate orbitals of the Ln ions more efficiently than the symmetrical bulk host materials. A significant red‐shift of the PL peak for Eu³⁺ was observed. The strategy for tailoring the energy level splitting of Ln ions by the highly designable 2D material crystal field provides a new method to extend their optical properties.     

Three Lanthanide Metal‐Organic Frameworks Based on an Ether‐Decorated Polycarboxylic Acid Linker: Luminescence Modulation,CO2 Capture and Conversion Properties

Three new isostructural 3D lanthanide metal–organic frameworks (Ln‐MOFs), {H[LnL(H₂O)]?2 H₂O}_n ( 1‐Ln ) (Ln=Eu³⁺, Gd³⁺ and Tb³⁺), based on infinite lanthanide‐carboxylate chains were constructed by employing an ether‐separated 5,5′‐oxydiisophthalic acid (H₄L) ligand under solvothermal reaction. 1‐Eu and 1‐Tb exhibit strong red and green emission, respectively, through the antenna effect, as demonstrated through a combination of calculation and experimental results. Moreover, a series of dichromatic doped 1‐Eu_xTb_y MOFs were fabricated by introducing different concentrations of Eu³⁺ and Tb³⁺ ions, and they display an unusual variation of luminescent colors from green, yellow, orange to red. 1‐Eu with channels decorated by ether O atoms and the open metal sites displays good performance for CO₂ capture and conversion between CO₂ and epoxides into cyclic carbonates.     

Air‐Free Synthesis of a Ferrous Metal‐Organic Framework Featuring HKUST‐1 Structure and its Mössbauer Spectrum

Single crystals of the Fe^II metal‐organic framework (MOF) with 1,3,5‐benzenetricarboxylate (BTC) as a linker were solvothermally obtained under air‐free conditions. X‐ray diffraction analysis of the crystals demonstrated a structure for Fe^II‐MOF analogous to that of [Cu₃(BTC)₂] (HKUST‐1). Unlike HKUST‐1, however, the Fe^II‐MOF did not retain permanent porosity after exchange of guest molecules. The Mössbauer spectrum of the Fe^II‐MOF was recorded at 80 K in zero field yielding an apparent quadrupole splitting of ΔE_Q = 2.43 mm · s^–1, and an isomer shift of δ = 1.20 mm · s^–1, consistent with high‐spin central iron(II) atoms. Air exposure of the Fe^II‐MOF was found to result in oxidation of the metal atoms to afford Fe^III. These results demonstrate that Fe^II‐based MOFs can be prepared in similar fashion to the [Cu₃(BTC)₂], but that they lack permanent porosity when degassed.     

Copper–Organic Framework Fabricated with CuS Nanoparticles: Synthesis,Electrical Conductivity,and Electrocatalytic Activities for Oxygen Reduction Reaction

To apply electrically nonconductive metal–organic frameworks (MOFs) in an electrocatalytic oxygen reduction reaction (ORR), we have developed a new method for fabricating various amounts of CuS nanoparticles (nano‐CuS) in/on a 3D Cu–MOF, [Cu₃(BTC)₂?(H₂O)₃] (BTC=1,3,5‐benzenetricarboxylate). As the amount of nano‐CuS increases in the composite, the electrical conductivity increases exponentially by up to circa 10⁹‐fold, while porosity decreases, compared with that of the pristine Cu‐MOF. The composites, nano‐CuS(x wt %)@Cu‐BTC, exhibit significantly higher electrocatalytic ORR activities than Cu‐BTC or nano‐CuS in an alkaline solution. The onset potential, electron transfer number, and kinetic current density increase when the electrical conductivity of the material increases but decrease when the material has a poor porosity, which shows that the two factors should be finely tuned by the amount of nano‐CuS for ORR application. Of these materials, CuS(28 wt %)@Cu‐BTC exhibits the best activity, showing the onset potential of 0.91 V vs. RHE, quasi‐four‐electron transfer pathway, and a kinetic current density of 11.3 mA cm^?2 at 0.55 V vs. RHE.     

Copper–Organic Framework Fabricated with CuS Nanoparticles: Synthesis,Electrical Conductivity,and Electrocatalytic Activities for Oxygen Reduction Reaction

To apply electrically nonconductive metal–organic frameworks (MOFs) in an electrocatalytic oxygen reduction reaction (ORR), we have developed a new method for fabricating various amounts of CuS nanoparticles (nano‐CuS) in/on a 3D Cu–MOF, [Cu₃(BTC)₂⋅(H₂O)₃] (BTC=1,3,5‐benzenetricarboxylate). As the amount of nano‐CuS increases in the composite, the electrical conductivity increases exponentially by up to circa 10⁹‐fold, while porosity decreases, compared with that of the pristine Cu‐MOF. The composites, nano‐CuS(x wt %)@Cu‐BTC, exhibit significantly higher electrocatalytic ORR activities than Cu‐BTC or nano‐CuS in an alkaline solution. The onset potential, electron transfer number, and kinetic current density increase when the electrical conductivity of the material increases but decrease when the material has a poor porosity, which shows that the two factors should be finely tuned by the amount of nano‐CuS for ORR application. Of these materials, CuS(28 wt %)@Cu‐BTC exhibits the best activity, showing the onset potential of 0.91 V vs. RHE, quasi‐four‐electron transfer pathway, and a kinetic current density of 11.3 mA cm⁻² at 0.55 V vs. RHE.     

The Uncommon Channel‐Based Ln‐MOFs for Highly Selective Fe3+ Detection and Superior Rhodamine B Adsorption

Two new isostructural 3D lanthanide–organic frameworks [H₂N(Me)₂] [Ln₃(OH)(bpt)₃(H₂O)₃] (DMF)₂?(H₂O)₄ ( 1‐Ln ; Ln=Sm and Eu) with a 1D channel (25 Å) have been successfully assembled from the rare trinuclear [Ln₃(OH)(COO)₉] clusters and biphenyl‐3,4′,5‐tricarboxylic acid (H₃bpt) and exhibit high stability towards water in the pH range 3–10. MOF 1‐Eu is a promising luminescent probe for sensing Fe³⁺ in aqueous solution and is also selective towards rhodamine B (RhB) with a superior adsorption capacity of 735 mg g^?1, which is the highest among the reported Ln‐MOFs for RhB removal so far. Periodic DFT calculations further confirmed the selective adsorption of rhodamine B over other dyes.     

Synthesis, structural characterization and selectively catalytic properties of metal-organic frameworks with nano-sized channels: A modular design strategy

Modular design method for designing and synthesizing microporous metal-organic frameworks (MOFs) with selective catalytical activity was described. MOFs with both nano-sized channels and potential catalytic activities could be obtained through self-assembly of a framework unit and a catalyst unit. By selecting hexaaquo metal complexes and the ligand BTC (BTC=1,3,5-benzenetricarboxylate) as framework-building blocks and using the metal complex [M(phen)₂(H₂O)₂]²⁺ (phen=1,10-phenanthroline) as a catalyst unit, a series of supramolecular MOFs 1-7 with three-dimensional nano-sized channels, i.e. [M¹(H₂O)₆]·[M²(phen)₂(H₂O)₂]₂·2(BTC)·xH₂O (M¹, M²Co(II), Ni(II), Cu(II), Zn(II), or Mn(II), phen=1,10-phenanthroline, BTC=1,3,5-benzenetricarboxylate, x=22−24), were synthesized through self-assembly, and their structures were characterized by IR, elemental analysis, and single-crystal X-ray diffraction. These supramolecular microporous MOFs showed significant size and shape selectivity in the catalyzed oxidation of phenols, which is due to catalytic reactions taking place in the channels of the framework. Design strategy, synthesis, and self-assembly mechanism for the construction of these porous MOFs were discussed.     

Microporous La–Metal–Organic Framework (MOF) with Large Surface Area

A microporous La–metal‐organic framework (MOF) has been synthesized by the reaction of La(NO₃)₃ ? 6 H₂O with a ligand 4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoate (TATAB) featuring three carboxylate groups. Crystal structure analysis confirms the formation of 3D MOF with hexagonal micropores, a Brunauer–Emmett—Teller (BET) surface area of 1074 m² g^?1 and high thermal and chemical stability. The CO₂ adsorption capacities are 76.8 cm³ g^?1 at 273 K and 34.6 cm³ g^?1 at 293 K, a highest measured CO₂ uptake for a Ln–MOFs.     

Systematic Investigation of High‐Sensitivity Luminescent Sensing for Polyoxometalates and Iron(III) by MOFs Assembled with a New Resorcin[4]arene‐Functionalized Tetracarboxylate

A new family of resorcin[4]arene‐based metal–organic frameworks (MOFs), namely, [Eu(HL)(DMF)(H₂O)₂] ? 3 H₂O ( 1 ), [Tb(HL)(DMF)(H₂O)₂] 3 H₂O ( 2 ), [Cd₄(L)₂(DMF)₄(H₂O)₂] 3 H₂O ( 3 ) and [Zn₃(HL)₂(H₂O)₂] 2 DMF ? 7 H₂O ( 4 ), have been constructed from a new resorcin[4]arene‐functionalized tetracarboxylic acid (H₄L=2,8,14,20‐tetra‐ethyl‐6,12,18,24‐tetra‐methoxy‐4,10,16,22‐tetra‐carboxy‐methoxy‐calix[4]arene). Isostructural 1 and 2 exhibit charming 1D motifs built with the cup‐like HL^3? anions and rare earth cations. Compounds 3 and 4 show a unique sandwich‐based 2D layer and a fascinating 3D framework, respectively. Remarkably, compounds 1 and 2 display intensive red and green emissions triggered by the efficient antenna effect of organic ligands under UV light. More importantly, systematic luminescence studies demonstrate that Ln‐MOFs 1 and 2 , as efficient multifunctional fluorescent materials, show highly selective and sensitive sensing of Fe³⁺, polyoxometalates (POMs), and acetone, which represents a rare example of a sensor for quantitatively detecting three different types of analytes. This is also an exceedingly rare example of Fe³⁺ and POMs detection in aqueous solutions employing resorcin[4]arene‐based luminescent Ln‐MOFs. Furthermore, the possible mechanism of the sensing properties is deduced.     

Preparation of porous monoliths via CO2‐in‐water HIPEs template and the in situ growth of metal organic frameworks on it for multiple applications

Monolithic porous copolymers with 3D structure were prepared via CO₂‐in‐water high internal phase emulsions template by graft copolymerization of sodium methacrylate (MAANa) on to methyl cellulose (MC) backbone. The yielded copolymer monoliths are characterized by Fourier transform infrared spectra, scanning electron microscopy (SEM), and mechanical instrument, the swelling degree of MC‐g‐PMAANa monoliths with different crosslinker in diverse pH were investigated. The adsorption performance of monolith to Cu(II) were conducted to explore its adsorption capacity to heavy metal ions from the wastewater. Then, a strategy of in situ growth of metal‐organic frameworks (MOFs) on MC‐g‐PMAANa that adsorbed with metal ions was proposed first. The X‐ray powder diffraction, SEM, and Brunauer‐Emmett‐Teller (BET) surface area result of MC‐g‐PMAANa/MOFs composites indicated that the MOFs nanoparticles were grown uniformly on the monolith wall without destroying its original 3D porous structure. Compared with MOFs nanoparticle, MC‐g‐PMAANa/MOFs composites have advantages of easy operation and handle, which more conform to practical application. Furthermore, the antibacterial activity of MC‐g‐PMAANa/MOFs was evaluated by disk agar diffusion and optical density methods. In addition, MC‐g‐PMAANa/Cu‐BTC composite was applied to dye adsorption, which has proved the underlying application of such composites in dye removal.     

Triazine‐Cored Lanthanide‐Based Metal–Organic Frameworks Featuring Unique Water Chains and Strong Characteristic Emissions

A new triazine‐cored tricarboxylic acid, N,N′,N“‐1,3,5‐triazine‐2,4,6‐triyltris(cis‐4‐aminocyclohexane‐carboxylic acid) (H₃L), has been prepared by replacing the chlorine atoms of cyanuric chloride with cis‐4‐aminocyclohexane‐carboxylic acid, which has been used for the construction of a series of triazine‐cored lanthanide‐based metal–organic frameworks (MOFs). All these MOFs were structurally authenticated, revealing that they are isostructural and exist as two‐dimensional (2D) coordination networks with the general formula [Ln(L)(H₂O)₂]?5.5 H₂O (Ln= 1?Gd , 2?Tb , 3?Eu ). A unique one‐dimensional water chain, composed of primary tetrameric cyclic rings and dodecameric cyclic rings, has been found entrapped in the lattice. Moreover, all these compounds display bright characteristic photoluminescence. Particularly, for 1 , apart from the strong blue emission peak (Φ_f=20.6 %) corresponding to the intraligand transition under near‐UV excitation, the characteristic emissions of Gd³⁺ cation (Φ_f=5.0 %) were unexpectedly observed upon excitation at 273 nm.     

Controllable Synthesis of Porphyrin-Based 2D Lanthanide Metal–Organic Frameworks with Thickness- and Metal-Node-Dependent Photocatalytic Performance

Synthesizing 2D metal–organic frameworks (2D MOFs) in high yields and rational tailoring of the properties in a predictable manner for specific applications is extremely challenging. Now, a series of porphyrin-based 2D lanthanide MOFs (Ln-TCPP, Ln=Ce, Sm, Eu, Tb, Yb, TCPP=tetrakis(4-carboxyphenyl) porphyrin) with different thickness were successfully prepared in a household microwave oven. The as-prepared 2D Ln-TCPP nanosheets showed thickness-dependent photocatalytic performances towards photooxidation of 1,5-dihydroxynaphthalene (1,5-DHN) to synthesize juglone. Particularly, the Yb-TCPP displayed outstanding photodynamic activity to generate O₂⁻ and ¹O₂. This work not only provides fundamental insights into structure designing and property tailoring of 2D MOFs nanosheets, but also pave a new way to improve the photocatalytic performance.     

Symmetry‐Guided Synthesis of Highly Porous Metal–Organic Frameworks with Fluorite Topology

Two stable, non‐interpenetrated MOFs, PCN‐521 and PCN‐523, were synthesized by a symmetry‐guided strategy. Augmentation of the 4‐connected nodes in the fluorite structure with a rigid tetrahedral ligand and substitution of the 8‐connected nodes by the Zr/Hf clusters yielded MOFs with large octahedral interstitial cavities. They are the first examples of Zr/Hf MOFs with tetrahedral linkers. PCN‐521 has the largest BET surface area (3411 m² g^‐1), pore size (20.5×20.5×37.4 Å) and void volume (78.5%) of MOFs formed from tetrahedral ligands. This work not only demonstrates a successful implementation of rational design of MOFs with desired topology, but also provides a systematic way of constructing non‐interpenetrated MOFs with high porosity.     

A Series of Lanthanide Metal–Organic Frameworks with Interesting Adjustable Photoluminescence Constructed by Helical Chains

Based on the isonicotinic acid (HIN=pyridine‐4‐carboxylic acid), seven lanthanide metal–organic frameworks (MOFs) with the formula [Ln(IN)₂L] (Ln=Eu ( 1 ), Tb ( 2 ), Er ( 3 ), Dy ( 4 ), Ho ( 5 ), Gd ( 6 ), La ( 7 ), L=OCH₂CH₂OH) have been synthesized by mixing Ln₂O₃ with HIN under solvothermal conditions, and characterized by single‐crystal X‐ray diffraction, powder X‐ray diffraction, infrared spectroscopy, and fluorescence spectroscopy. Crystal structural analysis shows that compounds 1–6 are isostructural, crystallize in a chiral space group P2₁2₁2₁, whereas compound 7 crystallizes in space group C2/c. Nevertheless, they all consist of new intertwined chains. Simultaneously, on the basis of the above‐mentioned compounds, we have realized a rational design strategy to form the doped Ln MOFs [(Eu_xTb_1?x)(IN)₂L] (x=0.35 ( 8 ), x=0.19 ( 9 ), x=0.06 ( 10 )) by utilizing Tb^III as the second “rare‐earth metal”. Interestingly, the photoluminescence of [(Eu_xTb_1?x)(IN)₂L] are not only adjustable by the ratios of Eu/Tb, but also temperature or excitation wavelength.     

Metal–Organic Frameworks for Oxygen Storage

We present a systematic study of metal–organic frameworks (MOFs) for the storage of oxygen. The study starts with grand canonical Monte Carlo simulations on a suite of 10 000 MOFs for the adsorption of oxygen. From these data, the MOFs were down selected to the prime candidates of HKUST‐1 (Cu‐BTC) and NU‐125, both with coordinatively unsaturated Cu sites. Oxygen isotherms up to 30 bar were measured at multiple temperatures to determine the isosteric heat of adsorption for oxygen on each MOF by fitting to a Toth isotherm model. High pressure (up to 140 bar) oxygen isotherms were measured for HKUST‐1 and NU‐125 to determine the working capacity of each MOF. Compared to the zeolite NaX and Norit activated carbon, NU‐125 has an increased excess capacity for oxygen of 237 % and 98 %, respectively. These materials could ultimately prove useful for oxygen storage in medical, military, and aerospace applications.