A Methylthio‐Functionalized‐MOF Photocatalyst with High Performance for Visible‐Light‐Driven H2 Evolution

Recently, the emergence of photoactive metal–organic frameworks (MOFs) has given great prospects for their applications as photocatalytic materials in visible‐light‐driven hydrogen evolution. Herein, a highly photoactive visible‐light‐driven material for H₂ evolution was prepared by introducing methylthio terephthalate into a MOF lattice via solvent‐assisted ligand‐exchange method. Accordingly, a first methylthio‐functionalized porous MOF decorated with Pt co‐catalyst for efficient photocatalytic H₂ evolution was achieved, which exhibited a high quantum yield (8.90 %) at 420 nm by use sacrificial triethanolamine. This hybrid material exhibited perfect H₂ production rate as high as 3814.0 μmol g^?1 h^?1, which even is one order of magnitude higher than that of the state‐of‐the‐art Pt/MOF photocatalyst derived from aminoterephthalate.     

Stable Heterometallic Cluster‐Based Organic Framework Catalysts for Artificial Photosynthesis

A series of stable heterometallic Fe₂M cluster‐based MOFs ( NNU‐31‐M , M=Co, Ni, Zn) photocatalysts are presented. They can achieve the overall conversion of CO₂ and H₂O into HCOOH and O₂ without the assistance of additional sacrificial agent and photosensitizer. The heterometallic cluster units and photosensitive ligands excited by visible light generate separated electrons and holes. Then, low‐valent metal M accepts electrons to reduce CO₂, and high‐valent Fe uses holes to oxidize H₂O. This is the first MOF photocatalyst system to finish artificial photosynthetic full reaction. It is noted that NNU‐31‐Zn exhibits the highest HCOOH yield of 26.3 μmol g^?1 h^?1 (selectivity of ca. 100 %). Furthermore, the DFT calculations based on crystal structures demonstrate the photocatalytic reaction mechanism. This work proposes a new strategy for how to design crystalline photocatalyst to realize artificial photosynthetic overall reaction.     

Structural analysis of interpenetrated methyl‐modified MOF‐5 and its gas‐adsorption properties

The first example of an interpenetrated methyl‐modified MOF‐5 with the formula Zn₄O(DMBDC)₃(DMF)₂, where DMBDC^2? is 2,5‐dimethylbenzene‐1,4‐dicarboxylate and DMF is N,N‐dimethylformamide (henceforth denoted as Me₂MOF‐5‐int ), namely, poly[tris(μ₄‐2,5‐dimethylbenzene‐1,4‐dicarboxylato)bis(N,N‐dimethylformamide)‐μ₄‐oxido‐tetrazinc(II)], [Zn₄(C₁₀H₈O₄)₃O(C₃H₇NO)₂]_n, has been obtained from a solvothermal synthesis of 2,5‐dimethylbenzene‐1,4‐dicarboxylic acid and Zn(NO₃)₂·6H₂O in DMF. A systematic study revealed that the choice of solvent is of critical importance for the synthesis of phase‐pure Me₂MOF‐5‐int , which was thoroughly characterized by single‐crystal and powder X‐ray diffraction (PXRD), as well as by gas‐adsorption analyses. The Brunauer–Emmett–Teller surface area of Me₂MOF‐5‐int (660 m² g^?1), determined by N₂ adsorption, is much lower than that of nonpenetrated Me₂MOF‐5 (2420 m² g^?1). However, Me₂MOF‐5‐int displays an H₂ uptake capacity of 1.26 wt% at 77 K and 1.0 bar, which is comparable to that of non‐interpenetrated Me₂MOF‐5 (1.51 wt%).     

Hydrangea‐like NiCo‐based Bimetal‐organic Frameworks,and their Pros and Cons as Supercapacitor Electrode Materials in Aqueous Electrolytes

Hydrangea‐like NiCo‐based bimetal‐organic frameworks (NiCo‐MOF) are synthesized in DMF‐EtOH solution via a solvothermal method, using 4,4′‐biphenyldicarboxylic acid as a ligand. NiCo‐MOF having a highest capacity of 1056.6 F · g^–1 at 0.5 A · g^–1 and 457.7 F · g^–1 even at 10 A · g^–1 is achieved at a Ni/Co/BPDC molar ratio of 1:1:1, a temperature of 170 °C and a reaction time of 12 hours. It exhibits secondary 3D microsphere structures assembled by primary 2D nanosheet structures, good crystalline structure and good thermal stability below 350 °C in air. All the electrochemical data show that NiCo‐MOF has the pros and cons as supercapacitor electrode materials in aqueous electrolytes. On the one hand, NiCo‐MOF has a high capacity even at a high current density, low internal resistance, charge‐transfer resistance and ion diffusion impendence, owing to the ordered coordination structure, 2D nanosheet structure and 3D assembled microsphere structure of NiCo‐MOF. On the other hand, the cycling stability and rate capability are not ideal enough due to the hydrolysis of coordination bonds in aqueous electrolytes, especially, in alkaline solution. The good dispersion and high electrochemical activity of metal ions bring a high capacity for NiCo‐MOF, but they result in the poor stability of NiCo‐MOF. In the future work, finding a suitable organic electrolyte is an effective way to enhance the cycling stability of NiCo‐MOF as well as deriving more stable skeleton materials from NiCo‐MOF.     

Efficient Visible‐Light‐Driven Carbon Dioxide Reduction by a Single‐Atom Implanted Metal–Organic Framework

Modular optimization of metal–organic frameworks (MOFs) was realized by incorporation of coordinatively unsaturated single atoms in a MOF matrix. The newly developed MOF can selectively capture and photoreduce CO₂ with high efficiency under visible‐light irradiation. Mechanistic investigation reveals that the presence of single Co atoms in the MOF can greatly boost the electron–hole separation efficiency in porphyrin units. Directional migration of photogenerated excitons from porphyrin to catalytic Co centers was witnessed, thereby achieving supply of long‐lived electrons for the reduction of CO₂ molecules adsorbed on Co centers. As a direct result, porphyrin MOF comprising atomically dispersed catalytic centers exhibits significantly enhanced photocatalytic conversion of CO₂, which is equivalent to a 3.13‐fold improvement in CO evolution rate (200.6 μmol g^?1 h^?1) and a 5.93‐fold enhancement in CH₄ generation rate (36.67 μmol g^?1 h^?1) compared to the parent MOF.     

Flower‐like Ni(II)‐based Metal‐organic Framework‐decorated Ag Nanoparticles: Fabrication,Characterization and Electrochemical Detection of Glucose

Glucose concentration monitoring is important for the prevention, diagnosis and treatment of diabetes. In this work, a composite material of AgNPs/MOF‐74(Ni) was prepared for electrochemical determination of glucose. AgNPs/MOF‐74(Ni) was characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X‐ray photoelectron spectroscopy (XPS). The electrochemical properties of the glassy carbon electrodes modified with the AgNPs/MOF‐74(Ni) composites were characterized by cyclic voltammetry (CV) and current‐time curve (I‐t curve) with three electrode system. The determination of glucose with the electrode modified by AgNPs/MOF‐74(Ni) has a linear range of 0.01～4 mM with the correlation coefficient (R²) of 0.994. The detection limit is 4.7 μM (S/N=3) and the sensitivity is 1.29 mA ? mM^?1 ? cm^?2. In addition, this sensing system possesses reasonable reproducibility and stability. The good performance of electrochemical determination for glucose is attributed to the concerted effect of silver nanoparticles and MOF‐74(Ni) on the promotion of glucose oxidation     

Facile Synthesis of Hydroxy‐Modified MOF‐5 for Improving the Adsorption Capacity of Hydrogen by Lithium Doping

A facile synthesis of partially hydroxy‐modified MOF‐5 and its improved H₂‐adsorption capacity by lithium doping are reported. The reaction of Zn(NO₃)₂ ? 6 H₂O with a mixture of terephthalic acid (H₂BDC) and 2‐hydroxyterephthalic acid (H₂BDC‐OH) in DMF gave hydroxy‐modified MOF‐5 (MOF‐5‐OH‐x), in which the molar fraction (x) of BDC‐OH^2? was up to 0.54 of the whole ligand. The MOF‐5‐OH‐x frameworks had high BET surface areas (about 3300 m² g^?1), which were comparable to that of MOF‐5. We suggest that the MOF‐5‐OH‐x frameworks are formed by the secondary growth of BDC^2?‐rich MOF‐5 seed crystals, which are nucleated during the early stage of the reaction. Subsequent Li doping into MOF‐5‐OH‐x results in increased H₂ uptake at 77 K and 0.1 MPa from 1.23 to 1.39 wt. % and an increased isosteric heat of H₂ adsorption from 5.1–4.2 kJ mol^?1 to 5.5–4.4 kJ mol^?1.     

A Co‐MOF with a (4,4)‐connected binodal two‐dimensional topology: synthesis,structure and photocatalytic properties

The Co‐MOF poly[[diaqua{μ₄‐1,1,2,2‐tetrakis[4‐(1H‐1,2,4‐triazol‐1‐yl)phenyl]ethylene‐κ⁴N:N′:N′′:N′′′}cobalt(II)] benzene‐1,4‐dicarboxylic acid benzene‐1,4‐dicarboxylate], {[Co(C₃₄H₂₄N₁₂)(H₂O)₂](C₈H₄O₄)·C₈H₆O₄}_n or {[Co(ttpe)(H₂O)₂](bdc)·(1,4‐H₂bdc)}_n, (I), was synthesized by the hydrothermal method using 1,1,2,2‐tetrakis[4‐(1H‐1,2,4‐triazol‐1‐yl)phenyl]ethylene (ttpe), benzene‐1,4‐dicarboxylic acid (1,4‐H₂bdc) and Co(NO₃)₂·6H₂O, and characterized by single‐crystal X‐ray diffraction, IR spectroscopy, powder X‐ray diffraction (PXRD), luminescence, optical band gap and valence band X‐ray photoelectron spectroscopy (VB XPS). Co‐MOF (I) shows a (4,4)‐connected binodal two‐dimensional topology with a point symbol of {4⁴·6²}{4⁴·6²}. The two‐dimensional networks capture free neutral 1,4‐H₂bdc molecules and bdc^2? anions, and construct a three‐dimensional supramolecular architecture via hydrogen‐bond interactions. MOF (I) is a good photocatalyst for the degradation of methylene blue and rhodamine B under visible‐light irradiation and can be reused at least five times.     

A novel nano‐size lanthanum metal–organic framework based on 5‐amino‐isophthalic acid and phenylenediamine: Photoluminescence study and sensing applications

In this paper, a novel lanthanum metal–organic framework La‐MOF was prepared via hydrothermal and reflux methods. The La‐MOF was achieved through the reaction of a 5‐amino‐isophthalic acid with 1, 2‐phenylenediamine and lanthanum chloride. The prepared La‐MOF structure was confirmed by XRD, mass spectrometry, IR, UV–Vis and elemental analysis, whereas the size, and morphology was examined by FE‐SEM/EDX and HR‐TEM. The results indicated that the La‐MOF prepared via both methods have the same structure and composition. Meanwhile, the MOF yield, reaction time, morphology, physiochemical and sensing properties were highly depended on the used preparation method. The photoluminescence (PL) study was carried out for the La‐MOF, and the results showed that La‐MOF exhibits strong emission at 558 nm after excitation at 369 nm. Moreover, the PL data indicating that the La‐MOF has highly selective sensing properties for iron (III) competing with different metal ions. The Stern‐Völmer graph shows a linear calibration curve which achieved over a concentration range 1.0–500 μM of Fe³⁺ with a correlation coefficient, detection, and quantitation limits 0.998, 1.35 μM and 4.08 μM, respectively. According to the remarkable quenching of the PL intensity of La‐MOF using various concentrations of Fe³⁺, it was successfully used as a sensor for Fe³⁺detecting in different water resources (pure and waste) samples. The quenching mechanism was studied and it has a dynamic type and due to efficient energy transfer between the La‐MOF and Fe³⁺.     

Two‐Dimensional Metal–Organic Framework Nanosheets for Membrane‐Based Gas Separation

Metal–organic framework (MOF) nanosheets could serve as ideal building blocks of molecular sieve membranes owing to their structural diversity and minimized mass‐transfer barrier. To date, discovery of appropriate MOF nanosheets and facile fabrication of high performance MOF nanosheet‐based membranes remain as great challenges. A modified soft‐physical exfoliation method was used to disintegrate a lamellar amphiprotic MOF into nanosheets with a high aspect ratio. Consequently sub‐10 nm‐thick ultrathin membranes were successfully prepared, and these demonstrated a remarkable H₂/CO₂ separation performance, with a separation factor of up to 166 and H₂ permeance of up to 8×10⁻⁷ mol m⁻² s⁻¹ Pa⁻¹ at elevated testing temperatures owing to a well‐defined size‐exclusion effect. This nanosheet‐based membrane holds great promise as the next generation of ultrapermeable gas separation membrane.     

A Metal–Organic Framework Containing Unusual Eight‐Connected Zr–Oxo Secondary Building Units and Orthogonal Carboxylic Acids for Ultra‐sensitive Metal Detection

Two metal–organic frameworks (MOFs) with Zr–oxo secondary building units (SBUs) were prepared by using p,p′‐terphenyldicarboxylate (TPDC) bridging ligands pre‐functionalized with orthogonal succinic acid (MOF‐ 1 ) and maleic acid groups (MOF‐ 2 ). Single‐crystal X‐ray structure analysis of MOF‐ 1 provides the first direct evidence for eight‐connected SBUs in UiO‐type MOFs. In contrast, MOF‐ 2 contains twelve‐connected SBUs as seen in the traditional UiO MOF topology. These structural assignments were confirmed by extended X‐ray absorption fine structure (EXAFS) analysis. The highly porous MOF‐ 1 is an excellent fluorescence sensor for metal ions with the detection limit of <0.5 ppb for Mn²⁺and three to four orders of magnitude greater sensitivity for metal ions than previously reported luminescent MOFs.     

Nanosized Functional MOFs Loading Ag/AgBr with Throughout‐Visible‐Light Absorption for High‐Efficiency Photocatalysis

Porous metal‐organic frameworks (MOFs) loading metal nanoparticles to form a composite photocatalyst demonstrated unique advantages. Modification of the electron donating group on the aromatic linkers of MOFs could increase the absorption range of light, thereby increasing the photocatalytic activity. In this study, we prepared a composite photocatalyst using a stable NH₂‐functionalized MOF (UiO‐66‐NH₂) to load semiconductor Ag/AgBr nanoparticles, and the resultant composites have intense optical absorption throughout visible light range. The greatly enhanced optical absorption and the unique hetero‐junction between Ag/AgBr and UiO‐66‐NH₂ render efficient separation and utilization of photogenerated electron‐hole pairs. Therefore, Ag/AgBr@UiO‐66‐NH₂ showed much more excellent photocatalytic activity, compared with unmodified UiO‐66 loading Ag/AgBr (Ag/AgBr@UiO‐66) and reported AgX@MOF catalysts. Moreover, the composite photocatalysts showed excellent stability during cycling experiment.     

Air‐Free Synthesis of a Ferrous Metal‐Organic Framework Featuring HKUST‐1 Structure and its Mössbauer Spectrum

Single crystals of the Fe^II metal‐organic framework (MOF) with 1,3,5‐benzenetricarboxylate (BTC) as a linker were solvothermally obtained under air‐free conditions. X‐ray diffraction analysis of the crystals demonstrated a structure for Fe^II‐MOF analogous to that of [Cu₃(BTC)₂] (HKUST‐1). Unlike HKUST‐1, however, the Fe^II‐MOF did not retain permanent porosity after exchange of guest molecules. The Mössbauer spectrum of the Fe^II‐MOF was recorded at 80 K in zero field yielding an apparent quadrupole splitting of ΔE_Q = 2.43 mm · s^–1, and an isomer shift of δ = 1.20 mm · s^–1, consistent with high‐spin central iron(II) atoms. Air exposure of the Fe^II‐MOF was found to result in oxidation of the metal atoms to afford Fe^III. These results demonstrate that Fe^II‐based MOFs can be prepared in similar fashion to the [Cu₃(BTC)₂], but that they lack permanent porosity when degassed.     

Thermodynamics of Hydrogen Adsorption on Metal‐Organic Frameworks

Interaction between adsorbed hydrogen and the coordinatively unsaturated Mg²⁺ and Co²⁺ cationic centres in Mg‐MOF‐74 and Co‐MOF‐74, respectively, was studied by means of variable‐temperature infrared (VTIR) spectroscopy. Perturbation of the H₂ molecule by the cationic adsorbing centre renders the H? H stretching mode IR‐active at 4088 and 4043 cm^?1 for Mg‐MOF‐74 and Co‐MOF‐74, respectively. Simultaneous measurement of integrated IR absorbance and hydrogen equilibrium pressure for spectra taken over the temperature range of 79–95 K allowed standard adsorption enthalpy and entropy to be determined. Mg‐MOF‐74 showed ΔH⁰=?9.4 kJ mol^?1 and ΔS⁰=?120 J mol^?1 K^?1, whereas for Co‐MOF‐74 the corresponding values of ΔH⁰=?11.2 kJ mol^?1 and ΔS⁰=?130 J mol^?1 K^?1 were obtained. The observed positive correlation between standard adsorption enthalpy and entropy is discussed in the broader context of corresponding data for hydrogen adsorption on cation‐exchanged zeolites, with a focus on the resulting implications for hydrogen storage and delivering.     

Ultrathin Metal–Organic Framework Nanosheets with Ultrahigh Loading of Single Pt Atoms for Efficient Visible‐Light‐Driven Photocatalytic H2 Evolution

A surfactant‐stabilized coordination strategy is used to make two‐dimensional (2D) single‐atom catalysts (SACs) with an ultrahigh Pt loading of 12.0 wt %, by assembly of pre‐formed single Pt atom coordinated porphyrin precursors into free‐standing metal–organic framework (MOF) nanosheets with an ultrathin thickness of 2.4±0.9 nm. This is the first example of 2D MOF‐based SACs. Remarkably, the 2D SACs exhibit a record‐high photocatalytic H₂ evolution rate of 11 320 μmol g^?1 h^?1 via water splitting under visible light irradiation (λ>420 nm) compared with those of reported MOF‐based photocatalysts. Moreover, the MOF nanosheets can be readily drop‐casted onto solid substrates, forming thin films while still retaining their photocatalytic activity, which is highly desirable for practical solar H₂ production.     

A Water‐Stable Terbium(III)–Organic Framework as a Chemosensor for Inorganic Ions,Nitro‐Containing Compounds and Antibiotics in Aqueous Solutions

Effective detection of organic/inorganic pollutants, such as antibiotics, nitro‐compounds, excessive Fe³⁺ and MnO₄^?, is crucial for human health and environmental protection. Here, a new terbium(III)–organic framework, namely [Tb(TATAB)(H₂O)]?2H₂O ( Tb‐MOF , H₃TATAB=4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐m‐aminobenzoic acid), was assembled and characterized. The Tb‐MOF exhibits a water‐stable 3D bnn framework. Due to the existence of competitive absorption, Tb‐MOF has a high selectivity for detecting Fe³⁺, MnO₄^?, 4‐nirophenol and nitroimidazole (ronidazole, metronidazole, dimetridazole, ornidazole) in aqueous through luminescent quenching. The results suggest that Tb‐MOF is a simple and reliable reagent with multiple sensor responses in practical applications. To the best of our knowledge, this work represents the first Tb^III‐based MOF as an efficient fluorescent sensor for detecting metal ions, inorganic anions, nitro‐compounds, and antibiotics simultaneously.     

Large‐Scale,Bottom‐Up Synthesis of Binary Metal–Organic Framework Nanosheets for Efficient Water Oxidation

Ultrathin metal–organic framework (MOF) nanosheets (NSs) offer potential for many applications, but the synthetic strategies are largely limited to top‐down, low‐yield exfoliation methods. Herein, Ni–M–MOF (M=Fe, Al, Co, Mn, Zn, and Cd) NSs are reported with a thickness of only several atomic layers, prepared by a large‐scale, bottom‐up solvothermal method. The solvent mixture of N,N‐dimethylacetamide and water plays key role in controlling the formation of these two‐dimensional MOF NSs. The MOF NSs can be directly used as efficient electrocatalysts for the oxygen evolution reaction, in which the Ni–Fe–MOF NSs deliver a current density of 10 mA cm^?2 at a low overpotential of 221 mV with a small Tafel slope of 56.0 mV dec^?1, and exhibit excellent stability for at least 20 h without obvious activity decay. Density functional theory calculations on the energy barriers for OER occurring at different metal sites confirm that Fe is the active site for OER at Ni–Fe–MOF NSs.     

Large‐Scale,Bottom‐Up Synthesis of Binary Metal–Organic Framework Nanosheets for Efficient Water Oxidation

Ultrathin metal–organic framework (MOF) nanosheets (NSs) offer potential for many applications, but the synthetic strategies are largely limited to top‐down, low‐yield exfoliation methods. Herein, Ni–M–MOF (M=Fe, Al, Co, Mn, Zn, and Cd) NSs are reported with a thickness of only several atomic layers, prepared by a large‐scale, bottom‐up solvothermal method. The solvent mixture of N,N‐dimethylacetamide and water plays key role in controlling the formation of these two‐dimensional MOF NSs. The MOF NSs can be directly used as efficient electrocatalysts for the oxygen evolution reaction, in which the Ni–Fe–MOF NSs deliver a current density of 10 mA cm^?2 at a low overpotential of 221 mV with a small Tafel slope of 56.0 mV dec^?1, and exhibit excellent stability for at least 20 h without obvious activity decay. Density functional theory calculations on the energy barriers for OER occurring at different metal sites confirm that Fe is the active site for OER at Ni–Fe–MOF NSs.     

Two‐Dimensional Co@N‐Carbon Nanocomposites Facilely Derived from Metal–Organic Framework Nanosheets for Efficient Bifunctional Electrocatalysis

Metal–organic frameworks (MOFs) and MOF‐derived nanomaterials have recently attracted great interest as highly efficient, non‐noble‐metal catalysts. In particular, two‐dimensional MOF nanosheet materials possess the advantages of both 2D layered nanomaterials and MOFs and are considered to be promising nanomaterials. Herein, we report a facile and scalable in situ hydrothermal synthesis of Co–hypoxanthine (HPA) MOF nanosheets, which were then directly carbonized to prepare uniform Co@N‐Carbon nanosheets for efficient bifunctional electrocatalytic hydrogen‐evolution reactions (HERs) and oxygen‐evolution reactions (OERs). The Co embedded in N‐doped carbon shows excellent and stable catalytic performance for bifunctional electrocatalytic OERs and HERs. For OERs, the overpotential of Co@N‐Carbon at 10 mA cm^?2 was 400 mV (vs. reversible hydrogen electrode, RHE). The current density of Co@N‐Carbon reached 100 mA cm^?2 at an overpotential of 560 mV, which showed much better performance than RuO₂; the largest current density of RuO₂ that could be reached was only 44 mA cm^?2. The Tafel slope of Co@N‐Carbon was 61 mV dec^?1, which is comparable to that of commercial RuO₂ (58 mV dec^?1). The excellent electrocatalytic properties can be attributed to the nanosheet structure and well‐dispersed carbon‐encapsulated Co, CoN nanoparticles, and N‐dopant sites, which provided high conductivity and a large number of accessible active sites. The results highlight the great potential of utilizing MOF nanosheet materials as promising templates for the preparation of 2D Co@N‐Carbon materials for electrocatalysis and will pave the way to the development of more efficient 2D nanomaterials for various catalytic applications.     

Density Functional Theory Study of Hydrogen Adsorption in a Ti‐Decorated Mg‐Based Metal–Organic Framework‐74

The Ti‐binding energy and hydrogen adsorption energy of a Ti‐decorated Mg‐based metal–organic framework‐74 (Mg‐MOF‐74) were evaluated by using first‐principles calculations. Our results revealed that only three Ti adsorption sites were found to be stable. The adsorption site near the metal oxide unit is the most stable. To investigate the hydrogen‐adsorption properties of Ti‐functionalized Mg‐MOF‐74, the hydrogen‐binding energy was determined. For the most stable Ti adsorption site, we found that the hydrogen adsorption energy ranged from 0.26 to 0.48 eV H₂^?1. This is within the desirable range for practical hydrogen‐storage applications. Moreover, the hydrogen capacity was determined by using ab initio molecular dynamics simulations. Our results revealed that the hydrogen uptake by Ti‐decorated Mg‐MOF‐74 at temperatures of 77, 150, and 298 K and ambient pressure were 1.81, 1.74, and 1.29 H₂ wt %, respectively.