Additive-Free,Robust H2 Production from H2O and DMF by Dehydrogenation Catalyzed by Cu/Cu2O Formed In Situ

Hydrogen production from organic/inorganic hydrides is a promising strategy for the development of novel clean energy resources to replace fossil fuels and satisfy ever-increasing energy demands. Most current processes involve small flammable chemicals and are catalyzed by noble metals in basic media with the release of the greenhouse gas CO₂. Herein, we describe an alternative pathway for highly efficient and robust H₂ production through a dehydrogenation reaction between water and N,N-dimethylformamide catalyzed by Cu/Cu₂O catalysts formed in situ. The catalysts exhibit high and robust activity for H₂ production. Importantly, the formation of H₂ as the sole gas and the valuable by-product N,N-dimethylaminoformic acid make this process clean and valuable with 100 % atom economy.     

Simultaneous H2 Generation and Biomass Upgrading in Water by an Efficient Noble‐Metal‐Free Bifunctional Electrocatalyst

As an environmentally friendly approach to generate H₂, electrocatalytic water splitting has attracted worldwide interest. However, its broad employment has been inhibited by costly catalysts and low energy conversion efficiency, mainly due to the sluggish anodic half reaction, the O₂ evolution reaction (OER), whose product O₂ is not of significant value. Herein, we report an efficient strategy to replace OER with a thermodynamically more favorable reaction, the oxidation of 5‐hydroxymethylfurfural (HMF) to 2,5‐furandicarboxylic acid (FDCA), catalyzed by 3D Ni₂P nanoparticle arrays on nickel foam (Ni₂P NPA/NF). HMF is one of the primary dehydration intermediates of raw biomass and FDCA is of many industrial applications. As a bifunctional electrocatalyst, Ni₂P NPA/NF is not only active for HMF oxidation but also competent for H₂ evolution. In fact, a two‐electrode electrolyzer employing Ni₂P NPA/NF for simultaneous H₂ and FDCA production required a voltage at least 200 mV smaller compared with pure water splitting to achieve the same current density, as well as exhibiting robust stability and nearly unity Faradaic efficiencies.     

Synthesis,Crystal Structure,and Magnetic Properties of {[Cu(phen)]2(C4H2O4)2} · 4.5H2O with C4H4O4 = Maleic Acid

Reaction of CuCl₂ · 2H₂O, phenanthroline, maleic acid and NaOH in CH₃OH/H₂O (1:1 v/v) at pH = 7.0 yielded blue {[Cu(phen)]₂(C₄H₂O₄)₂} · 4.5H₂O, which crystallizes in the monoclinic space group C2/c (no. 15) with cell dimensions: a = 18.127(2)Å, b = 12.482(2)Å, c = 14.602(2)Å, β = 103.43(1)°, U = 3213.5(8)ų, Z = 4. The crystal structure consists of the centrosymmetric dinuclear {[Cu(phen)]₂(C₄H₂O₄)₂} complex molecules and hydrogen bonded H₂O molecules. The Cu atoms are each square‐pyramidally coordinated by two N atoms of one phen ligand and three carboxyl O atoms of two maleato ligands with one carboxyl O atom at the apical position (d(Cu‐N) = 2.008, 2.012Å, equatorial d(Cu‐O) = 1.933, 1.969Å, axial d(Cu‐O) = 2.306Å). Two square‐pyramids are condensed via two apical carboxyl O atoms with a relatively larger Cu···Cu separation of 3.346(1)Å. The dinuclear complex molecules are assembled via the intermolecular π—π stacking interactions into 1D ribbons. Crossover of the resulting ribbons via interribbon π—π stacking interactions forms a 3D network with the tunnels occupied by H₂O molecules. The title complex behaves paramagnetically between 5—300 K, following the Curie‐Weiss law _χm(T—θ) = 0.435 cm³ · mol^—1 · K with θ = 1.59 K.     

Cyclodextrin-supported Co(OH)2 Clusters as Electrocatalysts for Efficient and Selective H2O2 Synthesis

Co-based material catalysts have shown attractive application prospects in the 2 e⁻ oxygen reduction reaction (ORR). However, for the industrial synthesis of H₂O₂, there is still lack of Co-based catalysts with high production yield rate. Here, novel cyclodextrin-supported Co(OH)₂ cluster catalysts were prepared via a mild and facile method. The catalyst exhibited remarkable H₂O₂ selectivity (94.2 % ~ 98.2 %), good stability (99 % activity retention after 35 h), and ultra-high H₂O₂ production yield rate (5.58 mol g_catalyst⁻¹ h⁻¹ in the H-type electrolytic cell), demonstrating its promising industrial application potential. Density functional theory (DFT) reveals that the cyclodextrin-mediated Co(OH)₂ electronic structure optimizes the adsorption of OOH* intermediates and significantly enhances the activation energy barrier for dissociation, leading to the high reactivity and selectivity for the 2 e⁻ ORR. This work offers a valuable and practical strategy to design Co-based electrocatalysts for H₂O₂ production.     

Oxidation Reaction of Phenol with H2O2 Catalyzed by Metallomicelles Made of Co(II) and Cu(II) Complexes of Imidazole Groups and Micelle as Mimic Peroxidase

The imidazole derivatives (N,N‐bis(2‐ethyl‐5‐methyl‐imidazole‐4‐ylmethyl) amino‐propane (biap)) and its complexes containing cobalt or copper ion were synthesized in this study. The oxidation reaction of phenol with oxidant H₂O₂ catalyzed by the metallomicelle made of the complexes of imidazole groups and micelle (CTAB, Brij35, LSS) as the mimetic peroxidase was studied. The results show that the reaction rate for the catalytic oxidation of phenol increases by a factor of approximately 1×10⁵ in the metallomicelle over that in the simple micelles or the pure buffer solution at pH=6.9 and 25°C. The catalytic effects changed with H₂O₂, temperature, pH, and surfactant kind in the catalytic reactive process are discussed. A kinetic mathematic model of the phenol oxidation catalyzed by the metallomicelle is proposed.     

A novel mechanism for the isomerization of N2O4 and its implication for the reaction with H2O and acid rain formation

We have discovered, by high‐level quantum‐chemical calculations, a new and predominant isomerization mechanism for N₂O₄ → ONONO₂ via a roaming‐like transition state occurring unimolecularly or bimolecularly during collision with H₂O. The new mechanism allows N₂O₄ to react with H₂O with a significantly lower barrier (< 13.1 kcal/mol) than the commonly known tight transition state (∼30‐45 kcal/mol) by concurrent stretching of the N N bond and rotation of one of the NO₂ groups to form trans‐ONONO₂, which then undergoes a rapid metathetical reaction with H₂O in the gas phase and in aqueous solution. The results have a significant implication for the hydrolysis of N₂O₄ in water to produce HONO and HNO₃. Rate constants for the isomerization and hydrolysis reactions have been predicted for atmospheric modeling applications.     

Crystal Structures of [Mn2(H2O)4(phen)2(C4H4O4)2] · 2 H2O and [Mn(phen)2(H2O)2][Mn(phen)2(C4H4O4)](C4H4O4) · 7 H2O

Reactions of 1,10‐phenanthroline monohydrate, Na₂C₄H₄O₄ · 6 H₂O and MnSO₄ · H₂O in CH₃OH/H₂O yielded a mixture of [Mn₂(H₂O)₄(phen)₂(C₄H₄O₄)₂] · 2 H₂O ( 1 ) and [Mn(phen)₂(H₂O)₂][Mn(phen)₂(C₄H₄O₄)](C₄H₄O₄) · 7 H₂O ( 2 ). The crystal structure of 1 (P1 (no. 2), a = 8.257(1) Å, b = 8.395(1) Å, c = 12.879(2) Å, α = 95.33(1)°, β = 104.56(1)°, γ = 106.76(1)°, V = 814.1(2) ų, Z = 1) consists of the dinuclear [Mn₂(H₂O)₄(phen)₂(C₄H₄O₄)₂] molecules and hydrogen bonded H₂O molecules. The centrosymmetric dinuclear molecules, in which the Mn atoms are octahedrally coordinated by two N atoms of one phen ligand and four O atoms from two H₂O molecules and two bis‐monodentate succinato ligands, are assembled via π‐π stacking interactions into 2 D supramolecular layers parallel to (101) (d(Mn–O) = 2.123–2.265 Å, d(Mn–N) = 2.307 Å). The crystal structure of 2 (P1 (no. 2), a = 14.289(2) Å, b = 15.182(2) Å, c = 15.913(2) Å, α = 67.108(7)°, β = 87.27(1)°, γ = 68.216(8)°, V = 2934.2(7) ų, Z = 2) is composed of the [Mn(phen)₂(H₂O)₂]²⁺ cations, [Mn(phen)₂(C₄H₄O₄)] complex molecules, (C₄H₄O₄)^2– anions, and H₂O molecules. The (C₄H₄O₄)^2– anions and H₂O molecules form 3 D hydrogen bonded network and the cations and complex molecules in the tunnels along [001] and [011], respectively, are assembled via the π‐π stacking interactions into 1 D supramolecular chains. The Mn atoms are octahedrally coordinated by four N atoms of two bidentate chelating phen ligands and two water O atoms or two carboxyl O atoms (d(Mn–O) = 2.088–2.129 Å, d(Mn–N) = 2.277–2.355 Å). Interestingly, the succinato ligands in the complex molecules assume gauche conformation bidentately to chelate the Mn atoms into seven‐membered rings.     

Syntheses and crystal structures of [Na(H2O)](C17H13O6SO3)* 2H2O and [NKH2O)6]C17H13O6SO3)2*H2O

Two hydrates of sodium 5,7‐dihydroxy‐6,4′‐dimethoxyisoflavone‐3′‐sulfonate ([Na(H₂O)J(C₁₇H₁₃O₆SO₃)*2H₂O,] 1) and nickel 5,7‐dihydroxy‐6,4′‐dimethoxyisoflavone‐3′‐sulfonate ([Ni(H₂O)₆](C₁₇H₁₃O₆SO₃)₂*4H₂O, 2) were synthesized and characterized by IR, 'H NMR and X‐ray diffraction analyses. The hydrate 1 crystallizes in the mono‐clinic system, space group P2(1) with a=0.8201(9) nm, b=0.8030(8) nm, c= 1.5361(16) nm, β=102.052(12)°, V =0.9893(18) nm³, D,= 1.579 g/cm³, Z=2, μ=0.252 nm^?1, F(000)=488, R=0.0353, wR=0.0873. The hydrate 2 belongs to triclinic system, space group P‐1 with a=0.7411(3) nm, b=0.8333(3) nm, c=1.7448(7) nm, α= 86.361(6)°, β=86.389(5)°, γ= 88.999(3)°, V=1.0731(7) nm³, D,=1.587 g/cm³, Z=1, μ=0.649 m^?1, F(000)= 534. In the structure of 1, the sodium cation is coordinated by six oxygen atom and two adjacent ones are bridged by three oxygen atoms to form an octahedron chain. The C? H…?… hydrogen bonds exist between two isoflavone molecules in the structure of 2. Meanwhile, hydrogen bonds in two compounds, link themselves to assemble two three‐dimensional network structures, respectively.     

Skin Bond Electron Relaxation Dynamics of Germanium Manipulated by Interactions with H2, O2, H2O,H2O2, HF,and Au

Although germanium performs amazingly well at sites surrounding hetero‐coordinated impurities and under‐coordinated defects or skins with unusual properties, having important impact on electronic and optical devices, understanding the behavior of the local bonds and electrons at such sites remains a great challenge. Here we show that a combination of density functional theory calculations, zone‐resolved X‐ray photoelectron spectroscopy, and bond order length strength correlation mechanism has enabled us to clarify the physical origin of the Ge 3d core‐level shift for the under‐coordinated (111) and (100) skin with and without hetero‐coordinated H₂, O₂, H₂O, H₂O₂, HF impurities. The Ge 3d level shifts from 27.579 (for an isolated atom) by 1.381 to 28.960 eV upon bulk formation. Atomic under‐coordination shifts the binding energy further to 29.823 eV for the (001) and to 29.713 eV for the (111) monolayer skin. Addition of O₂, HF, H₂O, H₂O₂ and Au impurities results in quantum entrapment by different amounts, but H adsorption leads to polarization.     

Two Heteroleptic Zinc(II) Complexes: [Zn(phen)(C9H15O6)2] and [Zn2(phen)2(H2O)2(C10H16O4)2] · 3H2O

Reactions of a freshly prepared Zn(OH)_2‐2x(CO₃)x · yH₂O precipitate, phenanthroline with azelaic and sebacic acid in CH₃OH/H₂O afforded [Zn(phen)(C₉H₁₅O₄)₂] ( 1 ) and [Zn₂(phen)₂(H₂O)₂(C₁₀H₁₆O₄)₂] · 3H₂O ( 2 ), respectively. They were structurally characterized by X‐ray diffraction methods. Compound 1 consists of complex molecules [Zn(phen)(C₉H₁₅O₄)₂] in which the Zn atoms are tetrahedrally coordinated by two N atoms of one phen ligand and two O atoms of different monodentate hydrogen azelaato groups. Intermolecular C(alkyl)‐H···π interactions and the intermolecular C(aryl)‐H···O and O‐H···O hydrogen bonds are responsible for the supramolecular assembly of the [Zn(phen)(C₉H₁₅O₄)₂] complexes. Compound 2 is built up from crystal H₂O molecules and the centrosymmetric binuclear [Zn₂(phen)₂(H₂O)₂(C₁₀H₁₆O₄)₂] complex, in which two [Zn(phen)(H₂O)]²⁺ moieties are bridged by two sebacato ligands. Through the intermolecular C(alkyl)‐H···O hydrogen bonds and π‐π stacking interactions, the binuclear complex molecules are assembled into layers, between which the lattice H₂O molecules are sandwiched. Crystal data: ( 1 ) C2/c (no. 15), a = 13.887(2), b = 9.790(2), c = 22.887(3)Å, β = 107.05(1)°, U = 2974.8(8)ų, Z = 4; ( 2 ) P1¯ (no. 2), a = 8.414(1), b = 10.679(1), c = 14.076(2)Å, α = 106.52(1)°, β = 91.56(1)°, γ = 99.09(1)°, U = 1193.9(2)ų, Z = 1.     

Tunable Syngas Production from CO2 and H2O in an Aqueous Photoelectrochemical Cell

Syngas, the mixture of CO and H₂, is a key feedstock to produce methanol and liquid fuels in industry, yet limited success has been made to develop clean syngas production using renewable solar energy. We demonstrated that syngas with a benchmark turnover number of 1330 and a desirable CO/H₂ ratio of 1:2 could be attained from photoelectrochemical CO₂ and H₂O reduction in an aqueous medium by exploiting the synergistic co‐catalytic effect between Cu and ZnO. The CO/H₂ ratio in the syngas products was tuned in a large range between 2:1 and 1:4 with a total unity Faradaic efficiency. Moreover, a high Faradaic efficiency of 70 % for CO was acheived at underpotential of 180 mV, which is the lowest potential ever reported in an aqueous photoelectrochemical cell. It was found that the combination of Cu and ZnO offered complementary chemical properties that lead to special reaction channels not seen in Cu, or ZnO alone.     

Two Novel CuII Phenanthroline Adipato Complexes with π‐π Stacking Interactions: [Cu(phen)2(C6H8O4)] · 4.5 H2O and [(Cu2(phen)2Cl2)(C6H8O4)] · 4 H2O

The blue copper complex compounds [Cu(phen)₂(C₆H₈O₄)] · 4.5 H₂O ( 1 ) and [(Cu₂(phen)₂Cl₂)(C₆H₈O₄)] · 4 H₂O ( 2 ) were synthesized from CuCl₂, 1,10‐phenanthroline (phen) and adipic acid in CH₃OH/H₂O solutions. [Cu(phen)₂‐ (C₆H₈O₄)] complexes and hydrogen bonded H₂O molecules form the crystal structure of ( 1 ) (P1 (no. 2), a = 10.086(2) Å, b = 11.470(2) Å, c = 16.523(3) Å, α = 99.80(1)°, β = 115.13(1)°, γ = 115.13(1)°, V = 1617.5(5) ų, Z = 2). The Cu atoms are square‐pyramidally coordinated by four N atoms of the phen ligands and one O atom of the adipate anion (d(Cu–O) = 1.989 Å, d(Cu–N) = 2.032–2.040 Å, axial d(Cu–N) = 2.235 Å). π‐π stacking interactions between phen ligands are responsible for the formation of supramolecular assemblies of [Cu(phen)₂(C₆H₈O₄)] complex molecules into 1 D chains along [111]. The crystal structure of ( 2 ) shows polymeric [(Cu₂(phen)₂Cl₂)(C₆H₈O₄)_2/2] chains (P1 (no. 2), a = 7.013(1) Å, b = 10.376(1) Å, c = 11.372(3) Å, α = 73.64(1)°, β = 78.15(2)°, γ = 81.44(1)°, V = 773.5(2) ų, Z = 1). The Cu atoms are fivefold coordinated by two Cl atoms, two N atoms of phen ligands and one O atom of the adipate anion, forming [CuCl₂N₂O] square pyramids with an axial Cl atom (d(Cu–O) = 1.958 Å, d(Cu–N) = 2.017–2.033 Å, d(Cu–Cl) = 2.281 Å; axial d(Cu–Cl) = 2.724 Å). Two square pyramids are condensed via the common Cl–Cl edge to centrosymmetric [Cu₂Cl₂N₄O₂] dimers, which are connected via the adipate anions to form the [(Cu₂(phen)₂Cl₂)(C₆H₈O₄)_2/2] chains. The supramolecular 3 D network results from π‐π stacking interactions between the chains. H₂O molecules are located in tunnels.     

基于 H2/O2 等离子体和钛硅沸石的丙烯气相环氧化方法

 将 H₂/O₂ 非平衡等离子体现场产生的气态 H₂O₂和丙烯与耦合反应器中钛硅沸石 TS-1 直接接触, 实现了丙烯气相环氧化反应. 结果表明, 非平衡等离子体生成气态 H₂O₂ 的速率由介质阻挡放电的输入功率决定, 环氧丙烷的生成速率和选择性取决于钛硅沸石催化剂和反应条件. 在 H₂ 和 O₂ 进料流量分别为 170 和 8 ml/min, 介质阻挡放电输入功率为 3.5 W, 环氧化反应温度为 110 ^oC, 丙烯进料量为 18 ml/min, 催化剂用量为 0.8 g 的条件下, 生成环氧丙烷产率达 246.9 g/(kg•h)、环氧丙烷选择性和 H₂O₂ 有效利用率分别为 95.4% 和 36.1%, 反应 36 h 内未见催化剂失活.     

Crystal Structures of {[Cd(phen)](C6H8O4)3/3} and {[Cd(phen)](C7H10O4)3/3} · 2H2O with C6H10O4 = Adipic Acid and C7H12O4 = Pimelic Acid

Two coordination polymers {[Cd(phen)](C₆H₈O₄)_3/3} ( 1 ) and {[Cd(phen)](C₇H₁₀O₄)_3/3} · 2H₂O ( 2 ) were structurally characterized by single crystal X‐ray diffraction methods. In 1 (C2/c (no. 15), a = 16.169(2)Å, b = 15.485(2)Å, c = 14.044(2)Å, β = 112.701(8)°, U = 3243.9(7)ų, Z = 8), the Cd atoms are coordinated by two N atoms of one phen ligand and five O atoms of three adipato ligands to form mono‐capped trigonal prisms with d(Cd‐O) = 2.271‐2.583Å and d(Cd‐N) = 2.309, 2.390Å. The [Cd(phen)] moieties are bridged by adipato ligands to generate {[Cd(phen)](C₆H₈O₄)_3/3} chains, which, via interchain π—π stacking interactions, are assembled into layers. Complex 2 (P1¯(no. 2), a = 9.986(1)Å, b = 10.230(3)Å, c = 11.243(1)Å, α = 66.06(1)°, β = 87.20(1)°, γ = 66.71(1)°, U = 955.7(2)ų, Z = 2) consists of {[Cd(phen)](C₇H₁₀O₄)_3/3} chains and hydrogen bonded H₂O molecules. The Cd atoms are pentagonal bipyramidally coordinated by two N atoms of one phen ligand and five O atoms of three pimelato ligands with d(Cd‐O) = 2.213—2.721Å and d(Cd‐N) = 2.329, 2.372Å. Through interchain π—π stacking interactions, the {[Cd(phen)](C₇H₁₀O₄)_3/3} chains resulting from [Cd(phen)] moieties bridged by pimelato ligands are assembled in to layers, between which the hydrogen bonded H₂O molecules are sandwiched.     

Photoassisted Oxygen Reduction Reaction in H2–O2 Fuel Cells

The oxygen reduction reaction (ORR) is a key step in H₂–O₂ fuel cells, which, however, suffers from slow kinetics even for state‐of‐the‐art catalysts. In this work, by making use of photocatalysis, the ORR was significantly accelerated with a polymer semiconductor (polyterthiophene). The onset potential underwent a positive shift from 0.66 to 1.34 V, and the current was enhanced by a factor of 44 at 0.6 V. The improvement was further confirmed in a proof‐of‐concept light‐driven H₂–O₂ fuel cell, in which the open circuit voltage (V_oc) increased from 0.64 to 1.18 V, and the short circuit current (J_sc) was doubled. This novel tandem structure combining a polymer solar cell and a fuel cell enables the simultaneous utilization of photo‐ and electrochemical energy, showing promising potential for applications in energy conversion and storage.     

Ultramicropore Engineering by Dehydration to Enable Molecular Sieving of H2 by Calcium Trimesate

The high energy footprint of commodity gas purification and increasing demand for gases require new approaches to gas separation. Kinetic separation of gas mixtures through molecular sieving can enable separation by molecular size or shape exclusion. Physisorbents must exhibit the right pore diameter to enable separation, but the 0.3–0.4 nm range relevant to small gas molecules is hard to control. Herein, dehydration of the ultramicroporous metal–organic framework Ca‐trimesate, Ca(HBTC)?H₂O (H₃BTC=trimesic acid), bnn‐1‐Ca‐H₂O, affords a narrow pore variant, Ca(HBTC), bnn‐1‐Ca. Whereas bnn‐1‐Ca‐H₂O (pore diameter 0.34 nm) exhibits ultra‐high CO₂/N₂, CO₂/CH₄, and C₂H₂/C₂H₄ binary selectivity, bnn‐1‐Ca (pore diameter 0.31 nm) offers ideal selectivity for H₂/CO₂ and H₂/N₂ under cryogenic conditions. Ca‐trimesate, the first physisorbent to exhibit H₂ sieving under cryogenic conditions, could be a prototype for a general approach to exert precise control over pore diameter in physisorbents.     

Homogeneous Molecular Iron Catalysts for Direct Photocatalytic Conversion of Formic Acid to Syngas (CO+H2)

The catalytic decomposition of formic acid to generate syngas (a mixture of H₂ and CO) is a highly valuable strategy for energy conversion. Syngas can be used directly in internal combustion engines or can be converted to liquid fuels, meeting future energy challenges in a sustainable manner. Herein, we report the use of homogeneous molecular iron catalysts combined with a CdS nanorods (NRs) semiconductor to construct a highly efficient photocatalytic system for direct conversion of formic acid to syngas at room temperature and atmospheric pressure. Under optimal conditions, the photocatalytic system presents an activity of 150 mmol g_catalyst^?1 h^?1 towards H₂, and an apparent quantum yield (AQY) of 16.8 %, making it among the most active noble‐metal‐free photocatalytic systems for H₂ evolution from formic acid under visible light. Meanwhile, these iron‐based molecular catalysts also demonstrate remarkable enhancement in CO evolution with robust stability. The mechanistic role of the molecular catalyst is further investigated by using cyclic voltammetry, which suggests the formation of Fe^I species as the key step in the catalytic conversion of formic acid to syngas.     

Influence of the Organic Species and Oxoanion in the Synthesis of two Uranyl Sulfate Hydrates, (H3O)2[(UO2)2(SO4)3­(H2O)]·7H2O and (H3O)2[(UO2)2(SO4)3(H2O)]·4H2O,and a Uranyl Selenate‐Selenite [C5H6N][(UO2)(SeO4)(HSeO3)]

Two uranyl sulfate hydrates, (H₃O)₂[(UO₂)₂(SO₄)₃(H₂O)] · 7H₂O (NDUS) and (H₃O)₂[(UO₂)₂(SO₄)₃(H₂O)] · 4H₂O (NDUS1), and one uranyl selenate‐selenite [C₅H₆N][(UO₂)(SeO₄)(HSeO₃)] (NDUSe), were obtained and their crystal structures solved. NDUS and NDUSe result from reactions in highly acidic media in the presence of L ‐cystine at 373 K. NDUS crystallized in a closed vial at 278 K after 5 days and NDUSe in an open beaker at 278 K after 2 weeks. NDUS1 was synthesized from aqueous solution at room temperature over the course of a month. NDUS, NDUS1, and NDUSe crystallize in the monoclinic space group P2₁/n, a = 15.0249(4) Å,b = 9.9320(2) Å, c = 15.6518(4) Å, β = 112.778(1)°, V = 2153.52(9) ų,Z = 4, the tetragonal space group P4₃2₁2, a = 10.6111(2) Å,c = 31.644(1) Å, V = 3563.0(2) ų, Z = 8, and in the monoclinic space group P2₁/n, a = 8.993(3) Å, b = 13.399(5) Å, c = 10.640(4) Å,β = 108.230(4)°, V = 1217.7(8) ų, Z = 4, respectively.The structural units of NDUS and NDUS1 are two‐dimensional uranyl sulfate sheets with a U/S ratio of 2/3. The structural unit of NDUSe is a two‐dimensional uranyl selenate‐selenite sheets with a U/Se ratio of 1/2. In‐situ reaction of the L ‐cystine ligands gives two distinct products for the different acids used here. Where sulfuric acid is used, only H₃O⁺ cations are located in the interlayer space, where they balance the charge of the sheets, whereas where selenic acid is used, interlayer C₅H₆N⁺ cations result from the cyclization of the carboxyl groups of L ‐cystine, balancing the charge of the sheets.     

Synthesis and Structure of the First Protonated Zincoborophosphate: (H_3O)Zn(H_2O)_2BP_2O_8·H_2O

IntroductionInthelastfewyearsthesearchfornewmaterialswithmicroporousandzeolite analogoussystemshasprimarilyfocusedonaluminumphosphatesandaluminosilicatecom poundssubstitutedwithavarietyofatoms .1 3 Cobalt sub stitutedaluminophosphatesaresystematicallystudiedmainlyduetotheirpotentialuseassolid acidcatalysts .Insuchmaterials ,theBr nstedacidsiteisgeneratedbyeachsubstitutionofAl(III)byCo(II)inwhichaprotonisneededtobalancethecharge .4 7Tofindnewtypeofze oliticmaterials ,theborophosphatemateri…     

One‐dimensional Cadmium(II) Coordination Polymers: Syntheses and Crystal Structures of [Cd(H2O)3(C5H6O4)]·2H2O,Cd(H2O)2(C6H8O4), and Cd(H2O)2(C8H12O4)

[Cd(H₂O)₃(C₅H₆O₄)]·2H₂O ( 1 ) and Cd(H₂O)₂(C₆H₈O₄) ( 2 ) were prepared from reactions of fresh CdCO₃ precipitate with aqueous solutions of glutaric acid and adipic acid, respectively, while Cd(H₂O)₂(C₈H₁₂O₄) ( 3 ) crystallized in a filtrate obtained from the hydrothermal reaction of CdCl₂·2.5H₂O, suberic acid and H₂O. Compound 1 consists of hydrogen bonded water molecules and linear {[Cd(H₂O)₃](C₅H₆O₄)_2/2} chains, which result from the pentagonal bipyramidally coordinated Cd atoms bridged by bis‐chelating glutarato ligands. In 2 and 3 , the six‐coordinate Cd atoms are bridged by bis‐chelating adipato and suberato ligands into zigzag chains according to {[Cd(H₂O)₃](C₅H₆O₄)_2/2} and {[Cd(H₂O)₂](C₈H₁₂O₄)_2/2}, respectively. The hydrogen bonds between water and the carboxylate oxygen atoms are responsible for the supramolecular assemblies of the zigzag chains into 3D networks. Crystallographic data: ( 1 ) P1¯ (no. 2), a = 8.012(1), b = 8.160(1), c = 8.939(1) Å, α = 82.29(1)°, β = 76.69(1)°, γ = 81.68(1)°, U = 559.6(1) ų, Z = 2; ( 2 ) C2/c (no. 15), a = 16.495(1), b = 5.578(1), c = 11.073(1) Å, β = 95.48(1)°, U = 1014.2(1) ų, Z = 4; ( 3 ) P2/c (no. 13), a = 9.407(2), b = 5.491(1), c = 11.317(2) Å, β = 95.93(3)°, U = 581.4(2) ų, Z = 2.