A Methylthio‐Functionalized‐MOF Photocatalyst with High Performance for Visible‐Light‐Driven H2 Evolution

Recently, the emergence of photoactive metal–organic frameworks (MOFs) has given great prospects for their applications as photocatalytic materials in visible‐light‐driven hydrogen evolution. Herein, a highly photoactive visible‐light‐driven material for H₂ evolution was prepared by introducing methylthio terephthalate into a MOF lattice via solvent‐assisted ligand‐exchange method. Accordingly, a first methylthio‐functionalized porous MOF decorated with Pt co‐catalyst for efficient photocatalytic H₂ evolution was achieved, which exhibited a high quantum yield (8.90 %) at 420 nm by use sacrificial triethanolamine. This hybrid material exhibited perfect H₂ production rate as high as 3814.0 μmol g^?1 h^?1, which even is one order of magnitude higher than that of the state‐of‐the‐art Pt/MOF photocatalyst derived from aminoterephthalate.     

Gold‐Nanoparticle‐Loaded Carbonate‐Modified Titanium(IV) Oxide Surface: Visible‐Light‐Driven Formation of Hydrogen Peroxide from Oxygen

Gold nanoparticle‐loaded rutile TiO₂ with a bimodal size distribution around 10.6 nm and 2.3 nm (BM‐Au/TiO₂) was prepared by the deposition precipitation and chemical reduction (DP‐CR) technique. Visible‐light irradiation (λ>430 nm) of the BM‐Au/TiO₂ plasmonic photocatalyst yields 35 μm H₂O₂ in aerated pure water at irradiation time (t_p)=1 h, and the H₂O₂ concentration increases to 640±60 μm by the addition of 4 % HCOOH as a sacrificing electron donor. Further, a carbonate‐modified surface BM‐Au/TiO₂ (BM‐Au/TiO₂‐CO₃^2?) generates a millimolar level of H₂O₂ at t_p=1 h with a quantum efficiency (Φ) of 5.4 % at λ=530 nm under the same conditions. The recycle experiments confirmed the stable performance of BM‐Au/TiO₂.     

Three‐Dimensional Ordered Assembly of Thin‐Shell Au/TiO2 Hollow Nanospheres for Enhanced Visible‐Light‐Driven Photocatalysis

An Au/TiO₂ nanostructure was constructed to obtain a highly efficient visible‐light‐driven photocatalyst. The design was based on a three‐dimensional ordered assembly of thin‐shell Au/TiO₂ hollow nanospheres (Au/TiO₂‐3 DHNSs). The designed photocatalysts exhibit not only a very high surface area but also photonic behavior and multiple light scattering, which significantly enhances visible‐light absorption. Thus Au/TiO₂‐3 DHNSs exhibit a visible‐light‐driven photocatalytic activity that is several times higher than conventional Au/TiO₂ nanopowders.     

Mesoporous Au/TiO2 Nanocomposite Microspheres for Visible‐Light Photocatalysis

Mesoporous Au/TiO₂ nanocomposite microspheres have been synthesized by using a microemulsion‐based bottom‐up self‐assembly (EBS) process starting from monodisperse gold and titania nanocrystals as building blocks. The microspheres had large surface areas (above 270 m² g^?1) and open mesopores (about 5 nm), which led to the adsorption‐driven concentration of organic molecules in the vicinity of the microspheres. Au nanoparticles, which were stably confined within the microspheres, enhanced the absorption over the broad UV/Vis/NIR spectroscopic range, owing to their strong surface plasmon resonance (SPR); as a result, the Au nanoparticles promoted the visible‐light photo‐induced degradation of organic compounds.     

Solar‐Driven Water–Gas Shift Reaction over CuOx/Al2O3 with 1.1 % of Light‐to‐Energy Storage

Hydrogen production from coal gasification provides a cleaning approach to convert coal resource into chemical energy, but the key procedures of coal gasification and thermal catalytic water–gas shift (WGS) reaction in this energy technology still suffer from high energy cost. We herein propose adopting a solar–driven WGS process instead of traditional thermal catalysis, with the aim of greatly decreasing the energy consumption. Under light irradiation, the CuO_x/Al₂O₃ delivers excellent catalytic activity (122 μmol g_cat^?1 s^?1 of H₂ evolution and >95 % of CO conversion) which is even more efficient than noble‐metal‐based catalysts (Au/Al₂O₃ and Pt/Al₂O₃). Importantly, this solar‐driven WGS process costs no electric/thermal power but attains 1.1 % of light‐to‐energy storage. The attractive performance of the solar‐driven WGS reaction over CuO_x/Al₂O₃ can be attributed to the combined photothermocatalysis and photocatalysis.     

Photoelectrochemical Hydrogen Peroxide Production from Water on a WO3/BiVO4 Photoanode and from O2 on an Au Cathode Without External Bias

The photoelectrochemical production and degradation properties of hydrogen peroxide (H₂O₂) were investigated on a WO₃/BiVO₄ photoanode in an aqueous electrolyte of hydrogen carbonate (HCO₃⁻). High concentrations of HCO₃⁻ species rather than CO₃²⁻ species inhibited the oxidative degradation of H₂O₂ on the WO₃/BiVO₄ photoanode, resulting in effective oxidative H₂O₂ generation and accumulation from water (H₂O). Moreover, the Au cathode facilitated two‐electron reduction of oxygen (O₂), resulting in reductive H₂O₂ production with high current efficiency. Combining the WO₃/BiVO₄ photoanode with a HCO₃⁻ electrolyte and an Au cathode also produced a clean and promising design for a photoelectrode system specializing in H₂O₂ production (η _anode(H₂O₂)≈50 %, η _cathode(H₂O₂)≈90 %) even without applied voltage between the photoanode and cathode under simulated solar light through a two‐photon process; this achieved effective H₂O₂ production when using an Au‐supported porous BiVO₄ photocatalyst sheet.     

Z‐Scheme Photocatalytic Water Splitting on a 2D Heterostructure of Black Phosphorus/Bismuth Vanadate Using Visible Light

Spontaneously solar‐driven water splitting to produce H₂ and O₂, that is, the conversion of solar energy to chemical energy is a dream of mankind. However, it is difficult to make overall water splitting feasible without using any sacrificial agents and external bias. Drawing inspiration from nature, a new artificial Z‐scheme photocatalytic system has been designed herein based on the two‐dimensional (2D) heterostructure of black phosphorus (BP)/bismuth vanadate (BiVO₄). An effective charge separation makes possible the reduction and oxidation of water on BP and BiVO₄, respectively. The optimum H₂ and O₂ production rates on BP/BiVO₄ were approximately 160 and 102 μmol g^?1 h^?1 under irradiation of light with a wavelength longer than 420 nm, without using any sacrificial agents or external bias.     

Single‐Site Active Cobalt‐Based Photocatalyst with a Long Carrier Lifetime for Spontaneous Overall Water Splitting

An active and stable photocatalyst to directly split water is desirable for solar‐energy conversion. However, it is difficult to accomplish overall water splitting without sacrificial electron donors. Herein, we demonstrate a strategy via constructing a single site to simultaneously promote charge separation and catalytic activity for robust overall water splitting. A single Co₁‐P₄ site confined on g‐C₃N₄ nanosheets was prepared by a facile phosphidation method, and identified by electron microscopy and X‐ray absorption spectroscopy. This coordinatively unsaturated Co site can effectively suppress charge recombination and prolong carrier lifetime by about 20 times relative to pristine g‐C₃N₄, and boost water molecular adsorption and activation for oxygen evolution. This single‐site photocatalyst exhibits steady and high water splitting activity with H₂ evolution rate up to 410.3 μmol h⁻¹ g⁻¹, and quantum efficiency as high as 2.2 % at 500 nm.     

Au Modified F-TiO2 for Efficient Photocatalytic Synthesis of Hydrogen Peroxide

In this work, Au-modified F-TiO₂ is developed as a simple and efficient photocatalyst for H₂O₂ production under ultraviolet light. The Au/F-TiO₂ photocatalyst avoids the necessity of adding fluoride into the reaction medium for enhancing H₂O₂ synthesis, as in a pure TiO₂ reaction system. The F⁻ modification inhibits the H₂O₂ decomposition through the formation of the ≡Ti–F complex. Au is an active cocatalyst for photocatalytic H₂O₂ production. We compared the activity of TiO₂ with F⁻ modification and without F⁻ modification in the presence of Au, and found that the H₂O₂ production rate over Au/F-TiO₂ reaches four times that of Au/TiO₂. In situ electron spin resonance studies have shown that H₂O₂ is produced by stepwise single-electron oxygen reduction on the Au/F-TiO₂ photocatalyst.     

Nature‐Inspired Environmental “Phosphorylation” Boosts Photocatalytic H2 Production over Carbon Nitride Nanosheets under Visible‐Light Irradiation

Inspired by the crucial roles of phosphates in natural photosynthesis, we explored an environmental “phosphorylation” strategy for boosting photocatalytic H₂ production over g‐C₃N₄ nanosheets under visible light. As expected, a substantial improvement was observed in the rate of H₂ evolution to 947 μmol h^?1, and the apparent quantum yield was as high as 26.1 % at 420 nm. The synergy of enhanced proton reduction and improved hole oxidation is proposed to account for the markedly increased activity. Our findings may provide a promising and facile approach to highly efficient photocatalysis for solar‐energy conversion.     

SPR effect of Au nanoparticles on the visible photocatalytic RhB degradation and NO oxidation over TiO2 hollow nanoboxes

Three-dimensional (3D) TiO₂ hollow structures have attracted much attention due to their unique properties. However, the large bandgap of (3.2 eV) results in the fact that anatase TiO₂ photocatalyst can only be excited by UV light, which only accounts for 3–5% of the solar energy. On considering that nobel metallatic nanomaterials can harvest visible light due to surface plasmon resonance (SPR) effect, in this paper, three kinds of Au nanoparticles with different morphologies, namely Au nanospheres (Au-NSs), Au nanorods (Au-NRs) and Au nanopentogons (Au-NPs) were prepared and used as photosensitizers to modified TiO₂ hollow nanoboxes (TiO₂-HNBs), aiming to explore high efficient visible-light-responsive photocatalyst. The photoreacitivty of Au/TiO₂-HNBs was evaluated by photoctalytic oxidation of Rhodamine B (RhB) and NO under visible irradiation (λ > 420 nm). It was found that the visible photoreactivity of TiO₂-HNBs was greatly enhanced after modified with Au nanoparticles, and TiO₂-HNBs loaded with Au-NRs exhibit the highest visible photocatalytic activity towards both RhB degradation and NO oxidation. Upon visible irradiation, SPR effect induces the production of hot electrons from the Au nanoparticles, which can further transfer to the conduction band of TiO₂-HNBs to produce superoxide radicals (O₂⁻), resulting in an efficient separation of photo-generated electron-hole pairs. The photoreactivity of Au-NRs/TiO₂-HNBs towards RhB degradation almost keeps unchanged even after recycling used for 5 times, indicating that it is promising to be use in practical applications.     

Heteroatom Dopants Promote Two‐Electron O2 Reduction for Photocatalytic Production of H2O2 on Polymeric Carbon Nitride

Polymeric carbon nitride modified with selected heteroatom dopants was prepared and used as a model photocatalyst to identify and understand the key mechanisms required for efficient photoproduction of H₂O₂ via selective oxygen reduction reaction (ORR). The photochemical production of H₂O₂ was achieved at a millimolar level per hour under visible‐light irradiation along with 100 % apparent quantum yield (in 360–450 nm region) and 96 % selectivity in an electrochemical system (0.1 V vs. RHE). Spectroscopic analysis in spatiotemporal resolution and theoretical calculations revealed that the synergistic association of alkali and sulfur dopants in the polymeric matrix promoted the interlayer charge separation and polarization of trapped electrons for preferable oxygen capture and reduction in ORR kinetics. This work highlights the key features that are responsible for controlling the photocatalytic activity and selectivity toward the two‐electron ORR, which should be the basis of further development of solar H₂O₂ production.     

A Long‐Lived Mononuclear Cyclopentadienyl Ruthenium Complex Grafted onto Anatase TiO2 for Efficient CO2 Photoreduction

This work shows a novel artificial donor–catalyst–acceptor triad photosystem based on a mononuclear C₅H₅‐RuH complex oxo‐bridged TiO₂ hybrid for efficient CO₂ photoreduction. An impressive quantum efficiency of 0.56 % for CH₄ under visible‐light irradiation was achieved over the triad photocatalyst, in which TiO₂ and C₅H₅‐RuH serve as the electron collector and CO₂‐reduction site and the photon‐harvester and water‐oxidation site, respectively. The fast electron injection from the excited Ru²⁺ cation to TiO₂ in ca. 0.5 ps and the slow backward charge recombination in half‐life of ca. 9.8 μs result in a long‐lived D⁺–C–A^? charge‐separated state responsible for the solar‐fuel production.     

Gold(III) Complexes of Asymmetrically Aryl‐Substituted 1,2‐Dithiolene Ligands Featuring Potential‐Controlled Spectroscopic Properties: An Insight into the Electronic Properties of bis(Pyren‐1‐yl‐ethylene‐1,2‐dithiolato)Gold(III)

The electrochemical, UV/Vis–NIR absorption, and emission‐spectroscopic features of (TBA⁺)( 1 ⁻) and the corresponding neutral complex 1 were investigated (TBA⁺=tetrabutylammonium; 1 ⁻=[Au^III(Pyr,H‐edt)₂]⁻; Pyr,H‐edt²⁻=pyren‐1‐yl‐ethylene‐1,2‐dithiolato). The intense electrochromic NIR absorption (λ_max=1432 nm; ε=13000 M ⁻¹ cm⁻¹ in CH₂Cl₂) and the potential‐controlled visible emission in the range 400–500 nm, the energy of which depends on the charge of the complex, were interpreted on the grounds of time‐dependent DFT calculations carried out on the cis and trans isomers of 1 , 1 ⁻, and 1 ²⁻. In addition, to evaluate the nonlinear optical properties of 1 ^x− (x=0, 1), first static hyperpolarizability values β_tot were calculated (β_tot=78×10⁻³⁰ and 212×10⁻³⁰ esu for the cis isomer of 1 ⁻ and 1 , respectively) and compared to those of differently substituted [Au(Ar,H‐edt)₂]^x− gold dithiolenes [Ar=naphth‐2‐yl ( 2 ), phenyl ( 3 ); x=0, 1].     

Atomic‐Level Insight into Optimizing the Hydrogen Evolution Pathway over a Co1‐N4 Single‐Site Photocatalyst

Knowledge of the photocatalytic H₂ evolution mechanism is of great importance for designing active catalysts toward a sustainable energy supply. An atomic‐level insight, design, and fabrication of single‐site Co₁‐N₄ composite as a prototypical photocatalyst for efficient H₂ production is reported. Correlated atomic characterizations verify that atomically dispersed Co atoms are successfully grafted by covalently forming a Co₁‐N₄ structure on g‐C₃N₄ nanosheets by atomic layer deposition. Different from the conventional homolytic or heterolytic pathway, theoretical investigations reveal that the coordinated donor nitrogen increases the electron density and lowers the formation barrier of key Co hydride intermediate, thereby accelerating H–H coupling to facilitate H₂ generation. As a result, the composite photocatalyst exhibits a robust H₂ production activity up to 10.8 μmol h⁻¹, 11 times higher than that of pristine counterpart.     

Tetraphenylphosphonium bis(2‐thioxo‐1,3‐dithiole‐4,5‐dithiolato)aurate(III) acetone solvate and ethyltriphenylphosphonium bis(2‐thioxo‐1,3‐dithiole‐4,5‐dithiolato)aurate(III)

In the two title complexes, (C₂₄H₂₀P)[Au(C₃S₅)₂]·C₃H₆O, (I), and (C₂₀H₂₀P)[Au(C₃S₅)₂], (II), the Au^III atoms exhibit square‐planar coordinations involving four S atoms from two 2‐thioxo‐1,3‐dithiole‐4,5‐dithiolate (dmit) ligands. The Au—S bond lengths, ranging from 2.3057 (8) to 2.3233 (7) Å in (I) and from 2.3119 (8) to 2.3291 (10) Å in (II), are slightly smaller than the sum of the single‐bond covalent radii. In (I), there are two halves of independent Ph₄P⁺ cations, in which the two P atoms lie on twofold rotation axis sites. The Ph₄P⁺ cations and [Au(C₃S₅)₂]⁻ anions are interspersed as columns in the packing. Layers composed of Ph₄P⁺ and [Au(C₃S₅)₂]⁻ are separated by layers of acetone molecules. In (II), the [Au(C₃S₅)₂]⁻ anions and EtPh₃P⁺ counter‐cations form a layered arrangement, and the [Au(C₃S₅)₂]⁻ anions form discrete pairs with a long intermolecular Au...S interaction for each Au atom in the crystal structure.     

Visible‐Light‐Driven CO2 Reduction by Mesoporous Carbon Nitride Modified with Polymeric Cobalt Phthalocyanine

The integration of molecular catalysts with low‐cost, solid light absorbers presents a promising strategy to construct catalysts for the generation of solar fuels. Here, we report a photocatalyst for CO₂ reduction that consists of a polymeric cobalt phthalocyanine catalyst (CoPPc) coupled with mesoporous carbon nitride (mpg‐CN_x) as the photosensitizer. This precious‐metal‐free hybrid catalyst selectively converts CO₂ to CO in organic solvents under UV/Vis light (AM 1.5G, 100 mW cm^?2, λ>300 nm) with a cobalt‐based turnover number of 90 for CO after 60 h. Notably, the photocatalyst retains 60 % CO evolution activity under visible light irradiation (λ>400 nm) and displays moderate water tolerance. The in situ polymerization of the phthalocyanine allows control of catalyst loading and is key for achieving photocatalytic CO₂ conversion.     

A 2D Metal‐Organic Framework Based on 9‐(Pyridin‐4‐yl)‐9H‐carbazole‐3,6‐dicarboxylic Acid: Synthesis,Structure and Properties

A metal‐organic framework (MOF ) formulated as [Cd₂(μ₃‐L)₂(DMF )₄]•H₂O ( CdL ) [H₂L =9‐(pyridin‐4‐yl)‐ 9H ‐carbazole‐3,6‐dicarboxylic acid, DMF =N ,N ‐dimethylformamide] was synthesized under solvothermal condition. Crystal structural analysis reveals that CdL features the layered 2D framework with L^{2 −} ligands as 3‐connected nodes. The compound CdL emits blue‐violet light with the narrow emission peak and the emission maximum at 414 nm upon excitation at the maximum excitation wavelength of 340 nm. The compound CdL has a similar emission spectrum curve to the free H₂L ligand that indicates the emission of compound CdL should be originated from the coordinated L^{2 −} ligands.     

Highly Active GaN‐Stabilized Ta3N5 Thin‐Film Photoanode for Solar Water Oxidation

Ta₃N₅ is a very promising photocatalyst for solar water splitting because of its wide spectrum solar energy utilization up to 600 nm and suitable energy band position straddling the water splitting redox reactions. However, its development has long been impeded by poor compatibility with electrolytes. Herein, we demonstrate a simple sputtering‐nitridation process to fabricate high‐performance Ta₃N₅ film photoanodes owing to successful synthesis of the vital TaO_δ precursors. An effective GaN coating strategy is developed to remarkably stabilize Ta₃N₅ by forming a crystalline nitride‐on‐nitride structure with an improved nitride/electrolyte interface. A stable, high photocurrent density of 8 mA cm⁻² was obtained with a CoPi/GaN/Ta₃N₅ photoanode at 1.2 V_RHE under simulated sunlight, with O₂ and H₂ generated at a Faraday efficiency of unity over 12 h. Our vapor‐phase deposition method can be used to fabricate high‐performance (oxy)nitrides for practical photoelectrochemical applications.     

Photocatalytic Hydrogen Evolution Coupled with Production of Highly Value-Added Organic Chemicals by a Composite Photocatalyst CdIn2S4@MIL-53-SO3Ni1/2

Photocatalytic water splitting coupled with the production of highly value-added organic chemicals is of significant importance, which represents a very promising pathway for transforming green solar energy into chemical energy. Herein, we report a composite photocatalyst CdIn₂S₄@MIL-53-SO₃Ni_1/2, which is highly efficient on prompting water splitting for the production of H₂ in the reduction half-reaction and selective oxidation of organic molecules for the production of highly value-added organic chemicals in the oxidation half-reaction under visible light irradiation. The superior photocatalytic properties of the composite photocatalyst CdIn₂S₄@MIL-53-SO₃Ni_1/2 should be ascribed to coating suspended ion catalyst (SIC), consisting of redox-active Ni^II ions in the anionic pores of coordination network MIL-53-SO₃⁻, on the surface of photoactive CdIn₂S₄, which endows photogenerated electron-hole pairs separate more efficiently for high rate production of H₂ and selective production of highly value-added organic products, demonstrating great potential for practical applications.