Oxidative-Insertion Reactivity Across a Geometrically Constrained Metal→Borane Interaction

While interest in cooperative reactivity of transition metals and Lewis acids is receiving significant attention, the scope of known reactions that directly exploit the polarized reverse-dative σ-bond of metal-borane complexes (i.e., M → BR₃) remains limited. Described herein is that the platinum (boryl)iminomethane (BIM) complex [Pt(κ²-N,B-^Cy2BIM)(CNAr^Dipp2)] can effect the oxidative insertion of a range of unsaturated organic substrates, including azides, isocyantes, and nitriles, as well as CO₂ and elemental sulfur (S₈). In addition, alkyl migration processes available to the BIM framework allow for post-insertion reaction sequences resulting in product release from the metal center.     

Syntheses and Crystal Structures of Two Chloro‐Bridged Coordination Polymers [Cd(BIM)Cl2]n and [Pb(BIM)Cl2]n

Two novel coordination polymers, [Cd(BIM)Cl₂]_n ( 1 ) and [Pb(BIM)Cl₂]_n ( 2 ) [wherein BIM = bis(imidazol‐1‐yl)methane], were synthesized by the reactions of the BIM ligand with CdCl₂ and PbCl₂, respectively. They were characterized by elemental analyses, IR, TGA and X‐ray single‐crystal diffraction techniques. Single‐crystal X‐ray structure analyses showed there is a pseudooctahedral arrangement around the cadmium atom in the complex 1 . It has a three‐dimensional network which contains one‐dimensional inorganic‐organic hybrid chains and μ₂‐bridging chloride ligands. A rare pentacoordinate square‐pyramidal arrangement was adopted for the lead(II) atom in the complex 2 , which has an unusual two‐dimensional layer structure of macrometallacycles crosslinked with the bridging Pb₂Cl₂ units. The metal atoms in both complexes were coordinated with two BIM ligands in cis arrangement and bridged by μ₂‐bridging chloride ligands.     

Insights into Functional‐Group‐Tolerant Polymerization Catalysis with Phosphine–Sulfonamide Palladium(II) Complexes

Two series of cationic palladium(II) methyl complexes {[(2‐MeOC₆H₄)₂PC₆H₄SO₂NHC₆H₃(2,6‐R¹,R²)]PdMe}₂[A]₂ ( ^X 1⁺‐A : R¹=R²=H: ^H 1⁺‐A ; R¹=R²=CH(CH₃)₂: ^DIPP 1⁺‐A ; R¹=H, R²=CF₃: ^CF3 1⁺‐A ; A =BF₄ or SbF₆) and neutral palladium(II) methyl complexes {[(2‐MeOC₆H₄)₂PC₆H₄SO₂NC₆H₃(2,6‐R¹,R²)]PdMe(L)} ( ^X 1‐acetone : L=acetone; ^X 1‐dmso : L=dimethyl sulfoxide; ^X 1‐pyr : L=pyridine) chelated by a phosphine–sulfonamide were synthesized and fully characterized. Stoichiometric insertion of methyl acrylate (MA) into all complexes revealed that a 2,1 regiochemistry dominates in the first insertion of MA. Subsequently, for the cationic complexes ^X 1⁺‐A , β‐H elimination from the 2,1‐insertion product ^X 2⁺‐A_MA‐2,1 is overwhelmingly favored over a second MA insertion to yield two major products ^X 4⁺‐A_MA‐1,2 and ^X 5⁺‐A_MA . By contrast, for the weakly coordinated neutral complexes ^X 1‐acetone and ^X 1‐dmso , a second MA insertion of the 2,1‐insertion product ^X 2_MA‐2,1 is faster than β‐H elimination and gives ^X 3_MA as major products. For the strongly coordinated neutral complexes ^X 1‐pyr , no second MA insertion and no β‐H elimination (except for ^DIPP 2‐pyr_MA‐2,1 ) were observed for the 2,1‐insertion product ^X 2‐pyr_MA‐2,1 . The cationic complexes ^X 1⁺‐A exhibited high catalytic activities for ethylene dimerization, affording butenes (C₄) with a high selectivity of up to 97.7 % (1‐butene: 99.3 %). Differences in activities and selectivities suggest that the phosphine–sulfonamide ligands remain coordinated to the metal center in a bidentate fashion in the catalytically active species. By comparison, the neutral complexes ^X 1‐acetone , ^X 1‐dmso , and ^X 1‐pyr showed very low activity towards ethylene to give traces of oligomers. DFT analyses taking into account the two possible coordination modes (O or N) of the sulfonamide ligand for the cationic system ^CF3 1⁺ suggested that the experimentally observed high activity in ethylene dimerization is the result of a facile first ethylene insertion into the O‐coordinated PdMe isomer and a subsequent favored β‐H elimination from the N‐coordinated isomer formed by isomerization of the insertion product. Steric hindrance by the N‐aryl substituent in the neutral systems ^CF3 1 and ^H 1 appears to contribute significantly to a higher barrier of insertion, which accounts for the experimentally observed low activity towards ethylene oligomerization.     

Heteroleptic FeII Complexes of 2,2′‐Biimidazole and Its Alkylated Derivatives: Spin‐Crossover and Photomagnetic Behavior

Three iron(II) complexes, [Fe(TPMA)(BIM)](ClO₄)₂?0.5H₂O ( 1 ), [Fe(TPMA)(XBIM)](ClO₄)₂ ( 2 ), and [Fe(TPMA)(XBBIM)](ClO₄)₂ ?0.75CH₃OH ( 3 ), were prepared by reactions of Fe^II perchlorate and the corresponding ligands (TPMA=tris(2‐pyridylmethyl)amine, BIM=2,2′‐biimidazole, XBIM=1,1′‐(α,α′‐o‐xylyl)‐2,2′‐biimidazole, XBBIM=1,1′‐(α,α′‐o‐xylyl)‐2,2′‐bibenzimidazole). The compounds were investigated by a combination of X‐ray crystallography, magnetic and photomagnetic measurements, and Mössbauer and optical absorption spectroscopy. Complex 1 exhibits a gradual spin crossover (SCO) with T_1/2=190 K, whereas 2 exhibits an abrupt SCO with approximately 7 K thermal hysteresis (T_1/2=196 K on cooling and 203 K on heating). Complex 3 is in the high‐spin state in the 2–300 K range. The difference in the magnetic behavior was traced to differences between the inter‐ and intramolecular interactions in 1 and 2 . The crystal packing of 2 features a hierarchy of intermolecular interactions that result in increased cooperativity and abruptness of the spin transition. In 3 , steric repulsion between H atoms of one of the pyridyl substituents of TPMA and one of the benzene rings of XBBIM results in a strong distortion of the Fe^II coordination environment, which stabilizes the high‐spin state of the complex. Both 1 and 2 exhibit a photoinduced low‐spin to high‐spin transition (LIESST effect) at 5 K. The difference in the character of intermolecular interactions of 1 and 2 also manifests in the kinetics of the decay of the photoinduced high‐spin state. For 1 , the decay rate constant follows the single‐exponential law, whereas for 2 it is a stretched exponential, reflecting the hierarchical nature of intermolecular contacts. The structural parameters of the photoinduced high‐spin state at 50 K are similar to those determined for the high‐spin state at 295 K. This study shows that N‐alkylation of BIM has a negligible effect on the ligand field strength. Therefore, the combination of TPMA and BIM offers a promising ligand platform for the design of functionalized SCO complexes.     

An Abnormal 3.7 Volt O3‐Type Sodium‐Ion Battery Cathode

Layered O3‐type sodium oxides (NaMO₂, M=transition metal) commonly exhibit an O3–P3 phase transition, which occurs at a low redox voltage of about 3 V (vs. Na⁺/Na) during sodium extraction and insertion, with the result that almost 50 % of their total capacity lies at this low voltage region, and they possess insufficient energy density as cathode materials for sodium‐ion batteries (NIBs). Therefore, development of high‐voltage O3‐type cathodes remains challenging because it is difficult to raise the phase‐transition voltage by reasonable structure modulation. A new example of O3‐type sodium insertion materials is presented for use in NIBs. The designed O3‐type Na_0.7Ni_0.35Sn_0.65O₂ material displays a highest redox potential of 3.7 V (vs. Na⁺/Na) among the reported O3‐type materials based on the Ni²⁺/Ni³⁺ couple, by virtue of its increased Ni?O bond ionicity through reduced orbital overlap between transition metals and oxygen within the MO₂ slabs. This study provides an orbital‐level understanding of the operating potentials of the nominal redox couples for O3‐NaMO₂ cathodes. The strategy described could be used to tailor electrodes for improved performance.     

Dinuclear Rare‐Earth Metal Alkyl Complexes Supported by Indolyl Ligands in μ‐η2:η1:η1 Hapticities and their High Catalytic Activity for Isoprene 1,4‐cis‐Polymerization

Two series of new dinuclear rare‐earth metal alkyl complexes supported by indolyl ligands in novel μ‐η²:η¹:η¹ hapticities are synthesized and characterized. Treatment of [RE(CH₂SiMe₃)₃(thf)₂] with 1 equivalent of 3‐(tBuN?CH)C₈H₅NH ( L₁ ) in THF gives the dinuclear rare‐earth metal alkyl complexes trans‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH(CH₂SiMe₃)}Ind)RE(thf)(CH₂SiMe₃)]₂ (Ind=indolyl, RE=Y, Dy, or Yb) in good yields. In the process, the indole unit of L₁ is deprotonated by the metal alkyl species and the imino C?N group is transferred to the amido group by alkyl CH₂SiMe₃ insertion, affording a new dianionic ligand that bridges two metal alkyl units in μ‐η²:η¹:η¹ bonding modes, forming the dinuclear rare‐earth metal alkyl complexes. When L₁ is reduced to 3‐(tBuNHCH₂)C₈H₅NH ( L₂ ), the reaction of [Yb(CH₂SiMe₃)₃(thf)₂] with 1 equivalent of L₂ in THF, interestingly, generated the trans‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH₂}Ind)Yb(thf)(CH₂SiMe₃)]₂ (major) and cis‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH₂}Ind)Yb(thf)(CH₂SiMe₃)]₂ (minor) complexes. The catalytic activities of these dinuclear rare‐earth metal alkyl complexes for isoprene polymerization were investigated; the yttrium and dysprosium complexes exhibited high catalytic activities and high regio‐ and stereoselectivities for isoprene 1,4‐cis‐polymerization.     

Metal‐induced B–H Activation. Addition of Methyl Acetylene Carboxylates to Cp*Rh‐ and Cp*Ir 16 e Halfsandwich Complexes containing a Chelating 1,2‐Dicarba‐closo‐dodecaborane‐1,2‐diselenolato Ligand

Reactions of the 16e halfsandwich complexes Cp*M[Se₂C₂(B₁₀H₁₀)] ( 5 M = Rh, 6 M = Ir) with both methyl acetylene monocarboxylate and dimethyl acetylene dicarboxylate were studied in order to obtain information on the influence of the chalcogen (selenium versus sulfur), as well as further evidence for B–H activation, ortho‐metalation and substitution of the carborane. In the case of the rhodium‐selenium complex 5 , the reaction with methyl acetylene monocarboxylate gave products which were all structurally different compared to those of the sulfur analogue of 5 : a polycyclic derivative 12 with a B(6)‐substituted carborane cage was obtained as one of the final products; in addition, both geometrical isomers containing a Rh–B bond ( 10 , 11 ) and isomers without a Rh–B bond ( 8 , 9 ) were isolated, the latter being the result of twofold insertion into one of the Rh–Se bonds. In the case of the iridium‐selenium complex 6 , the reaction with methyl acetylene monocarboxylate led to the geometrical isomers 13 and 14 (similar to 10 and 11 ) with structures possessing an Ir–B bond. Both 5 and 6 reacted with dimethyl acetylene dicarboxylate at room temperature to give the complexes 15 and 16 which are formed by addition of the C≡C unit to the metal center and insertion into one of the metal‐selenium bonds. The proposed structures in solution were deduced from NMR data (¹H, ¹¹B, ¹³C, ⁷⁷Se, ¹⁰³Rh NMR), and an X‐ray structural analysis was carried out for the rhodium complex 12 .     

Influence of the catalyst on monomer insertion in the syndiospecific copolymerization of styrene and para‐methylstyrene

The effect of the kind of transition‐metal catalyst on the extent of comonomer insertion in the syndiospecific complex‐coordinative copolymerization of styrene and para‐methylstyrene has been investigated. The results for the influence of the polymerization conditions have shown that there is no real difference between solution copolymerization in toluene and solvent‐free styrene copolymerization in bulk, with respect to the reactivity ratio for para‐methylstyrene (r₂), under comparable conditions in the presence of methylaluminoxane and triisobutylaluminum and at low polymerization conversions. All the investigated catalysts lead to a preferred incorporation of para‐methylstyrene into the polymer chain in comparison with styrene and over the whole range of monomer compositions. The increasing capability of the different catalysts to provide copolymers with enhanced para‐methylstyrene concentrations can be summarized by the increasing r₂ values for the copolymerization in bulk as follows: η⁵‐pentamethylcyclopentadienyl titanium trichloride < η⁵‐octahydrofluorenyl titanium trimethoxide < η⁵‐octahydrofluorenyl titanium tristrifluoroacetate < η⁵‐cyclopentadienyl titanium(N,N‐dicyclohexylamido)dichloride < η⁵‐cyclopentadienyl titanium trichloride. For a correlation between the catalyst structure and the comonomer insertion, the catalysts can be described by electronic effects (electrostatic charge of the transition‐metal atom) and steric effects (minimum structural cone angle). The results show that the steric properties of the transition‐metal complexes have the most important effect on the insertion of para‐methylstyrene into the copolymer. If the minimum structural cone angle of the ligand of the transition‐metal catalyst decreases, the incorporation of the comonomer para‐methylstyrene increases significantly. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2061–2067, 2005     

Post‐Synthetic Reversible Incorporation of Organic Linkers into Porous Metal–Organic Frameworks through Single‐Crystal‐to‐Single‐Crystal Transformations and Modification of Gas‐Sorption Properties

The porous metal–organic framework (MOF) {[Zn₂(TCPBDA)(H₂O)₂]?30 DMF?6 H₂O}_n ( SNU‐30 ; DMF=N,N‐dimethylformamide) has been prepared by the solvothermal reaction of N,N,N′,N′‐tetrakis(4‐carboxyphenyl)biphenyl‐4,4′‐diamine (H₄TCPBDA) and Zn(NO₃)₂?6 H₂O in DMF/tBuOH. The post‐synthetic modification of SNU‐30 by the insertion of 3,6‐di(4‐pyridyl)‐1,2,4,5‐tetrazine (bpta) affords single‐crystalline {[Zn₂(TCPBDA)(bpta)]?23 DMF?4 H₂O}_n ( SNU‐31 SC ), in which channels are divided by the bpta linkers. Interestingly, unlike its pristine form, the bridging bpta ligand in the MOF is bent due to steric constraints. SNU‐31 can be also prepared through a one‐pot solvothermal synthesis from Zn^II, TCPBDA^4?, and bpta. The bpta linker can be liberated from this MOF by immersion in N,N‐diethylformamide (DEF) to afford the single‐crystalline SNU‐30 SC , which is structurally similar to SNU‐30 . This phenomenon of reversible insertion and removal of the bridging ligand while preserving the single crystallinity is unprecedented in MOFs. Desolvated solid SNU‐30′ adsorbs N₂, O₂, H₂, CO₂, and CH₄ gases, whereas desolvated SNU‐31′ exhibits selective adsorption of CO₂ over N₂, O₂, H₂, and CH₄, thus demonstrating that the gas adsorption properties of MOF can be modified by post‐synthetic insertion/removal of a bridging ligand.     

Insight into Oxide‐Bridged Heterobimetallic Al/Zr Olefin Polymerization Catalysts

Reaction of (TBBP)AlMe ? THF with [Cp*₂Zr(Me)OH] gave [(TBBP)Al(THF)?O?Zr(Me)Cp*₂] (TBBP=3,3’,5,5’‐tetra‐tBu‐2,2'‐biphenolato). Reaction of [DIPPnacnacAl(Me)?O?Zr(Me)Cp₂] with [PhMe₂NH]⁺[B(C₆F₅)₄]^? gave a cationic Al/Zr complex that could be structurally characterized as its THF adduct [(DIPPnacnac)Al(Me)?O?Zr(THF)Cp₂]⁺[B(C₆F₅)₄]^? (DIPPnacnac=HC[(Me)C=N(2,6‐iPr₂?C₆H₃)]₂). The first complex polymerizes ethene in the presence of an alkylaluminum scavenger but in the absence of methylalumoxane (MAO). The adduct cation is inactive under these conditions. Theoretical calculations show very high energy barriers (ΔG=40–47 kcal mol^?1) for ethene insertion with a bridged AlOZr catalyst. This is due to an unfavorable six‐membered‐ring transition state, in which the methyl group bridges the metal and ethene with an obtuse metal‐Me‐C angle that prevents synchronized bond‐breaking and making. A more‐likely pathway is dissociation of the Al‐O‐Zr complex into an aluminate and the active polymerization catalyst [Cp*₂ZrMe]⁺.     

Multi‐Electron Reactions Enabled by Anion‐Based Redox Chemistry for High‐Energy Multivalent Rechargeable Batteries

The development of multivalent metal (such as Mg and Ca) based battery systems is hindered by lack of suitable cathode chemistry that shows reversible multi‐electron redox reactions. Cationic redox centres in the classical cathodes can only afford stepwise single‐electron transfer, which are not ideal for multivalent‐ion storage. The charge imbalance during multivalent ion insertion might lead to an additional kinetic barrier for ion mobility. Therefore, multivalent battery cathodes only exhibit slope‐like voltage profiles with insertion/extraction redox of less than one electron. Taking VS₄ as a model material, reversible two‐electron redox with cationic–anionic contributions is verified in both rechargeable Mg batteries (RMBs) and rechargeable Ca batteries (RCBs). The corresponding cells exhibit high capacities of >300 mAh g^?1 at a current density of 100 mA g^?1 in both RMBs and RCBs, resulting in a high energy density of >300 Wh kg^?1 for RMBs and >500 Wh kg^?1 for RCBs. Mechanistic studies reveal a unique redox activity mainly at anionic sulfides moieties and fast Mg²⁺ ion diffusion kinetics enabled by the soft structure and flexible electron configuration of VS₄.     

Enhancing Capacity Performance by Utilizing the Redox Chemistry of the Electrolyte in a Dual‐Electrolyte Sodium‐Ion Battery

A strategy is described to increase charge storage in a dual electrolyte Na‐ion battery (DESIB) by combining the redox chemistry of the electrolyte with a Na⁺ ion de‐insertion/insertion cathode. Conventional electrolytes do not contribute to charge storage in battery systems, but redox‐active electrolytes augment this property via charge transfer reactions at the electrode–electrolyte interface. The capacity of the cathode combined with that provided by the electrolyte redox reaction thus increases overall charge storage. An aqueous sodium hexacyanoferrate (Na₄Fe(CN)₆) solution is employed as the redox‐active electrolyte (Na‐FC) and sodium nickel Prussian blue (Na_x‐NiBP) as the Na⁺ ion insertion/de‐insertion cathode. The capacity of DESIB with Na‐FC electrolyte is twice that of a battery using a conventional (Na₂SO₄) electrolyte. The use of redox‐active electrolytes in batteries of any kind is an efficient and scalable approach to develop advanced high‐energy‐density storage systems.     

Insertion Reactions of 1,2‐Disubstituted Olefins with an α‐Diimine Palladium(II) Complex

The migratory insertions of cis or trans olefins CH(X)?CH(Me) (X = Ph, Br, or Et) into the metal–acyl bond of the complex [Pd(Me)(CO)(ⁱPr₂dab)]⁺ [B{3,5‐(CF₃)₂C₆H₃}₄]^? ( 1 ) (ⁱPr₂dab = 1,4‐diisopropyl‐1,4‐diazabuta‐1,3‐diene = N,N′‐(ethane‐1,2‐diylidene)bis[1‐methylethanamine]) are described (Scheme 1). The resulting five‐membered palladacycles were characterized by NMR spectroscopy and X‐ray analysis. Experimental data reveal some important aspects concerning the regio‐ and stereochemistry of the insertion process. In particular, the presence of a Ph or Br substituent at the alkene leads to the formation of highly regiospecific products. Moreover, in all cases, the geometry of the substituents in the formed palladacycle was the same as in the starting olefin, as a consequence of a cis addition of the Pd–acyl fragment to the C?C bond. Reaction with CO and MeOH of the five‐membered complex derived from trans‐β‐methylstyrene (= [(1E)‐prop‐1‐enyl]benzene) insertion, yielded the 2,3‐substituted γ‐keto ester 9 with an (2RS,3SR)‐configuration (Scheme 3).     

Synthesis and Diverse Transformations of a Dinitrogen Dititanium Hydride Complex Bearing Rigid Acridane‐Based PNP‐Pincer Ligands

Studies on N₂ activation and transformation by transition metal hydride complexes are of particular interest and importance. The synthesis and diverse transformations of a dinitrogen dititanium hydride complex bearing the rigid acridane‐based ^acriPNP‐pincer ligands {[(^acriPNP)Ti]₂(μ₂‐η¹:η²‐N₂)(μ₂‐H)₂} are presented. This complex enabled N₂ cleavage and hydrogenation even without additional H₂ or other reducing agents. Furthermore, diverse transformations of the N₂ unit with a variety of organometallic compounds such as ZnMe₂, MgMe₂, AlMe₃, B(C₆F₅)₃, PinBH, and PhSiH₃ have been well established at the rigid ^acriPNP‐ligated dititanium framework, such as reversible bonding‐mode change between the end‐on and side‐on/end‐on fashions, diborylative N=N bond cleavage, the formal insertion of two dimethylaluminum species into the N=N bond, and the formal insertion of two silylene units into the N=N bond. This work has revealed many unprecedented aspects of dinitrogen reaction chemistry.     

Insertion of Molecular Oxygen in Transition‐Metal Hydride Bonds,Oxygen‐Bond Activation,and Unimolecular Dissociation of Metal Hydroperoxide Intermediates. Short Communication

Thermal activation of molecular oxygen is observed for the late‐transition‐metal cationic complexes [M(H)(OH)]⁺ with M=Fe, Co, and Ni. Most of the reactions proceed via insertion in a metal? hydride bond followed by the dissociation of the resulting metal hydroperoxide intermediate(s) upon losses of O, OH, and H₂O. As indicated by labeling studies, the processes for the Ni complex are very specific such that the O‐atoms of the neutrals expelled originate almost exclusively from the substrate O₂. In comparison to the [M(H)(OH)]⁺ cations, the ion? molecule reactions of the metal hydride systems [MH]⁺ (M=Fe, Co, Ni, Pd, and Pt) with dioxygen are rather inefficient, if they occur at all. However, for the solvated complexes [M(H)(H₂O)]⁺ (M=Fe, Co, Ni), the reaction with O₂ involving O? O bond activation show higher reactivity depending on the transition metal: 60% for the Ni, 16% for the Co, and only 4% for the Fe complex relative to the [Ni(H)(OH)]⁺/O₂ couple.     

Metal‐Substituted Zeolitic Imidazolate Framework ZIF‐108: Gas‐Sorption and Membrane‐Separation Properties

A series of dual‐metal zeolitic imidazolate framework (ZIF) crystals with SOD and RHO topologies was synthesised by metal substitution from ZIF‐108 (Zn(2‐nitroimidazolate)₂, SOD topology) as the parent material. This was based on the concept that metal substitution of ZIF‐108 requires a much lower activation energy than homogenous nucleation owing to the metastability of ZIF‐108. In‐depth investigations of the formation processes of the daughter ZIFs indicated that the transformation of ZIF‐108 is a dissolution/heterogeneous nucleation process. Typical isostructural Co²⁺ substitution mainly occurs at the outer surface of ZIF‐108 and results in a core–shell structure. On the contrary, the Cu²⁺‐substituted ZIF has a RHO topology with a homogeneous distribution of Cu²⁺ ions in the structure. Substitution with Ni²⁺ resulted in a remarkable enhancement in adsorption selectivity toward CO₂ over N₂ by a factor of up to 227. With Co²⁺‐substituted nanoparticles as inorganic filler, a mixed matrix membrane based on polysulfone displayed greatly improved performance in the separation of H₂/CH₄, CO₂/N₂ and CO₂/CH₄.     

N‐Methyl‐2, 2'‐Dipicolylamine Complexes as Potential Models for Metal‐Mediated Base Pairs

Metal‐mediated base pairs can be used to insert metal ions into nucleic acids at precisely defined positions. As structural data on the resulting metal‐modified DNA are scarce, appropriate model complexes need to be synthesized and structurally characterized. Accordingly, the molecular structures of nine transition metal complexes of N‐methyl‐2, 2'‐dipicolylamine (dipic) are reported. In combination with an azole‐containing artificial nucleoside, this tridentate ligand had recently been used to generate metal‐mediated base pairs (Chem. Commun. 2011 , 47, 11041–11043). The Pd^II and Pt^II complexes reported here confirm that the formation of planar complexes (as required for a metal‐mediated base pair) comprising N‐methyl‐2, 2'‐dipicolylamine is possible. Two Hg^II complexes with differing stoichiometry indicate that a planar structure might also be formed with this metal ion, even though it is not favored. In the complex [Ag₂(dipic)₂](ClO₄)₂, the two Ag^I ions are located close to one another with an Ag ··· Ag distance of 2.9152(3) Å, suggesting the presence of a strong argentophilic interaction.     

A Joint Experimental/Theoretical Investigation of the Statistical Olefin/Conjugated Diene Copolymerization Catalyzed by a Hemi‐Lanthanidocene [(Cp*)(BH4)LnR]

Statistical copolymerization of ethylene and isoprene was achieved by using a borohydrido half‐lanthanidocene complex. Under copolymerization conditions, activation of [(Cp*)(BH₄)₂Nd(thf)₂] (Cp*=η⁵‐C₅Me₅) by an appropriate alkylating agent affords trans‐1,4‐poly‐isoprene‐co‐ethylene. Analysis of the microstructure of the copolymer revealed the presence of successive short sequences of ethylene/ethylene, trans‐1,4‐isoprene/ethylene, and trans‐1,4‐isoprene/trans‐1,4‐isoprene. A small amount of 1,2‐insertion of isoprene was observed, and no cyclic structures within the chain were characterized. Test runs showed that these catalysts are unable to copolymerize α‐olefins (such as hex‐1‐ene) with isoprene. The probable initial steps in the copolymerization have been computed at the DFT level of theory. Analysis of the energy profile provides insight into the catalyst’s activity and selectivity. Our theoretical results highlight the key role played by the allyl intermediate, in which diene insertion, and to a lesser extent olefin insertion, is the rate‐determining step of the process. These results also illustrate the coordination behavior of the allyl ligand during the insertion of an incoming monomer, which directly inserts, after pre‐coordination to the metal center, into the η³‐allyl ligand without inducing an η³ to η¹ haptotropic shift. Finally, the inactivity of this family of catalysts towards the copolymerization of hex‐1‐ene was rationalized on the basis of the free‐energy profile of the copolymerization.     

Minimalistic Ditopic Ligands: An α‐S,N‐Donor‐Substituted Alkyne as Effective Intermetallic Conjugation Linker

The capability of donor‐substituted alkynes to link different metal ions in a side‐on carbon donor‐chelate coordination mode is extended from the donor centers S and P to the second period element N. The complex [Tp′W(CO)₂{η²‐C₂(S)(NHBn)}] (Tp′=hydrido‐tris(3,5‐dimethylpyrazolyl)borate, Bn=benzyl) bearing a terminal sulfur atom and a secondary amine substituent is accessible by a metal‐template synthesis. Subsequent deprotonation allowed the formation of remarkably stable heterobimetallic complexes with the [(η⁵‐C₅H₅)Ru(PPh₃)] and the [Ir(ppy)₂] moiety. Electrochemical and spectroscopic investigations (cyclic voltammetry, IR, UV/Vis, luminescence, EPR), as well as DFT calculations, and X‐ray structure determinations of the W–Ru complex in two oxidation states reveal a strong metal–metal coupling but also a limited delocalization of excited states.     

Finding all‐nonmetal transition‐metal‐like superatom and its magnetic building block

In novel superatom chemistry, it is very attractive that all‐metal clusters can mimic the behaviors of nonmetal atoms and simple nonmetal molecules. Wizardly all‐metal halogen‐like superatom Al₁₃ with 2P⁵ sub shell (corresponding to the 3p⁵ of chlorine) is the most typical example. In contrast, how to mimic the behaviors of magnetic transition‐metal atom using all‐nonmetal cluster is an intriguing challenge for superatom chemistry. In response to this based on human intuition, using quantum chemistry methods and extending jellium model from metal cluster to all‐nonmetal cluster, we have found out that all‐nonmetal octahedral B₆ cluster with characteristic jellium electron configuration 1S²1P⁶2S²1D⁸ in the triplet ground state can mimic the behaviors of transition‐metal Ni atom with electron configuration 3s²3p⁶4s²3d⁸ in electronic configuration, physics and chemistry. Interestingly, the characteristic order of 1S1P2S1D for the B₆ nonmetal cluster with short B‐B lengths is different from that of the traditional jellium model—1S1P1D2S for metal clusters with long M‐M lengths, which exhibits a novel size effect of nonmetal cluster on jellium orbital ordering. Based on the jellium electron configuration, the B₆ with the spin moment value of 2μ_B is a new all‐nonmetal transition‐metal nickel‐like superatom exhibiting a new kind of all‐nonmetal magnetic superatom. Finding the application of the all‐nonmetal magnetic superatom, we encapsulate the magnetic superatom B₆ inside fully hydrogenated fullerene forming a clathrate B₆@C₆₀H₆₀ with the spin moment value of 2μ_B. As the C₆₀H₆₀ cage as a polymerization unit can conserve the spin moment of endohedral B₆, the clathrate B₆@C₆₀H₆₀ is a new all‐nonmetal magnetic superatom building block. Naturally, magnetic superatom structures of the B₆ and B₆@C₆₀H₆₀ may be metastable.