Jumping Crystal of a Hydrogen‐Bonded Organic Framework Induced by the Collective Molecular Motion of a Twisted π System

There is a limited number of reports on mechanically responsive molecular crystals, including thermo‐responsive and light‐responsive crystals. Rigid ordered molecular crystals with a close‐packing structure are less able to accept distortion, which hampers the development of such molecular crystals. The thermosalient effect, or “crystal jumping”, refers to a thermo‐responsive system that converts heat into mechanical force by thermally induced phase transition. While they have recently attracted attention as potential highly efficient molecular actuators, less than two dozens of thermosalient molecular crystals have been reported to date, and the design of such molecules as well as how they assemble to express a thermosalient effect are unknown. Herein, we demonstrate how the cooperative molecular motion of twisted π units could serve to develop a thermo‐responsive jumping molecular crystal with a hydrogen‐bonded organic framework (HOF) of tetra[2,3]thienylene tetracarboxylic acid ( 1 ). The cooperative change in the molecular structure triggered by the desolvation of THF in the channel of the HOF structure induced not only a change in the structure of HOF but also mechanical force. Hydrogen bonding interactions contributed significant thermal stability to maintain the HOF assembly even with a dynamic structural change.     

Ferroelasticity in an Organic Crystal: A Macroscopic and Molecular Level Study

Ferroelasticity has been relatively well‐studied in mechanically robust inorganic atomic solids but poorly investigated in organic crystals, which are typically inherently fragile. The absence of precise methods for the mechanical analysis of small crystals has, no doubt, impeded research on organic ferroelasticity. The first example of ferroelasticity in an organic molecular crystal of 5‐chloro‐2‐nitroaniline is presented, with thorough characterization by macro‐ and microscopic methods. The observed cyclic stress–strain curve satisfies the requirements of ferroelasticity. Single‐crystal X‐ray structure analysis provides insight into lattice correspondence at the twining interface, which enables substantial crystal bending by a large molecular orientational shift. This deformation represents the highest maximum strain (115.9 %) among reported twinning materials, and the associated dissipated energy density of 216 kJ m⁻³ is relatively large, which suggests that this material is potentially useful as a mechanical damping agent.     

Versatile Ferroelastic Deformability in an Organic Single Crystal by Twinning about a Molecular Zone Axis

Ferroelasticity involves the generation of spontaneous strain in a solid by the application of mechanical stress. The phenomenon has been well‐studied in metal alloys but relatively neglected in organic solid‐state chemistry. Herein we present multiple discrete modes of mechanical twinning and a mechanistic analysis of ferroelasticity in 1,4‐diethoxybenzene. Single crystals of the compound can be almost freely deformed, as multiple different twin domains are generated simultaneously. Within each domain, single‐crystal character is preserved. Such extremely versatile, ferroelastic deformability is unprecedented in single crystals of any kind and defies the fragility and anisotropic mechanical behaviour of most organic crystals. The dissipated energy and critical stress associated with twinning deformation in 1,4‐diethoxybenzene suggests that organic solids could be developed for absorbing weak mechanical shocks in such applications as mechanical damping and soft robotics.     

Molecular Spring‐like Triple‐Helix Coordination Polymers as Dual‐Stress and Thermally Responsive Crystalline Metal–Organic Materials

Elastic metal–organic materials (MOMs) capable of multiple stimuli‐responsiveness based on dual‐stress and thermally responsive triple‐helix coordination polymers are presented. The strong metal‐coordination linkage and the flexibility of organic linkers in these MOMs, rather than the 4 Å stacking interactions observed in organic crystals, causes the helical chain to act like a molecular spring and thus accounts for their macroscopic elasticity. The thermosalient effect of elastic MOMs is reported for the first time. Crystal structure analyses at different temperatures reveal that this thermoresponsiveness is achieved by adaptive regulation of the triple‐helix chains by fine‐tuning the opening angle of flexible V‐shaped organic linkers and rotation of its lateral conjugated groups to resist possible expansion, thus demonstrating the vital role of adaptive reorganization of triple‐helix metal–organic chains as a molecular spring‐like motif in crystal jumping.     

Super‐ and Ferroelastic Organic Semiconductors for Ultraflexible Single‐Crystal Electronics

Like silicon, single crystals of organic semiconductors are pursued to attain intrinsic charge transport properties. However, they are intolerant to mechanical deformation, impeding their application in flexible electronic devices. Such contradictory properties, namely exceptional molecular ordering and mechanical flexibility, are unified in this work. We found that bis(triisopropylsilylethynyl)pentacene (TIPS‐P) crystals can undergo mechanically induced structural transitions to exhibit superelasticity and ferroelasticity. These properties arise from cooperative and correlated molecular displacements and rotations in response to mechanical stress. By utilizing a bending‐induced ferroelastic transition of TIPS‐P, flexible single‐crystal electronic devices were obtained that can tolerate strains (?) of more than 13 % while maintaining the charge carrier mobility of unstrained crystals (μ>0.7 μ₀). Our work will pave the way for high‐performance ultraflexible single‐crystal organic electronics for sensors, memories, and robotic applications.     

Bending,Curling, Rolling,and Salient Behavior of Molecular Crystals Driven by [2+2] Cycloaddition of a Styrylbenzoxazole Derivative

We report interesting photomechanical behaviors of the dynamic molecular crystals of (E )‐2‐(2,4‐dichlorostyryl)benzo[d]oxazole ( BOACl24 ). The photosalient effect of the rod‐like crystal based on a metal‐free olefin driven by photodimerization is observed. Moreover, the needle‐like crystals of BOACl24 exhibit a reversible bending away from a UV light source. The nanofibers curl easily under UV irradiation in an organogel, in which the photo‐induced rolling of a small slice occurs. This suggests that the rapid release of the accumulated strain during photodimerization may lead to a photosalient effect, and the bending or curling happens when the strain is released slowly. Notably, [2+2] cycloaddition takes place between two different conformational isomers of BOACl24 on account of the rotation of the benzoxazole ring around the C−C bond in an excited state before photodimerization. Such topo‐photochemical reaction has not been reported elsewhere.     

Molecular‐Level Understanding of Structural Changes of Organic Crystals Induced by Macroscopic Mechanical Stimulation

Structural changes to molecular crystals upon mechanical stimulation have attracted attention for sensing, recording, and microactuation. Comprehensive structure information is required to understand relationships between the mechanical force applied, the crystal structure, and the bulk property changes in order to develop general design concepts for mechanoresponsive compounds. Unfortunately, mechanical stimulation of organic crystals typically deteriorates their integrity, preventing detailed structure analyses by single‐crystal X‐ray diffraction (XRD) methods. However, in the past three years, several interesting studies have been reported in which molecular crystals retain their integrity even after a mechanically induced crystalline structure change. These materials have allowed us to investigate how macroscopic mechanical forces affect the microscopic structures of molecular crystals by single‐crystal XRD analyses. This Minireview summarizes current knowledge of mechanically induced structure changes in molecular crystals, which will facilitate research in this field.     

Self‐Healing Behavior in a Thermo‐Mechanically Responsive Cocrystal during a Reversible Phase Transition

The molecular‐level motions of a coronene‐based supramolecular rotator are amplified into macroscopic changes of crystals by co‐assembly of coronene and TCNB (1,2,4,5‐tetracyanobenzene) into a charge‐transfer complex. The as‐prepared cocrystals show remarkable self‐healing behavior and thermo‐mechanical responses during thermally‐induced reversible single‐crystal‐to‐single‐crystal (SCSC) phase transitions. Comprehensive analysis of the microscopic observations as well as differential scanning calorimetry (DSC) measurements and crystal habits reveal that a thermally‐reduced‐rate‐dependent dynamic character exists in the phase transition. The crystallographic studies show that the global similarity of the packing patterns of both phases with local differences, such as molecular stacking sequence and orientations, should be the origin of the self‐healing behavior of these crystals.     

Mechanical Alloying of Metal–Organic Frameworks

The solvent‐free mechanical milling process for two distinct metal–organic framework (MOF) crystals induced the formation of a solid solution, which is not feasible by conventional solution‐based syntheses. X‐ray and STEM‐EDX studies revealed that performing mechanical milling under an Ar atmosphere promotes the high diffusivity of each metal ion in an amorphous solid matrix; the amorphous state turns into the porous crystalline structure by vapor exposure treatment to form a new phase of a MOF solid solution.     

Molecular Spring-like Triple-Helix Coordination Polymers as Dual-Stress and Thermally Responsive Crystalline Metal–Organic Materials

Elastic metal–organic materials (MOMs) capable of multiple stimuli-responsiveness based on dual-stress and thermally responsive triple-helix coordination polymers are presented. The strong metal-coordination linkage and the flexibility of organic linkers in these MOMs, rather than the 4 Å stacking interactions observed in organic crystals, causes the helical chain to act like a molecular spring and thus accounts for their macroscopic elasticity. The thermosalient effect of elastic MOMs is reported for the first time. Crystal structure analyses at different temperatures reveal that this thermoresponsiveness is achieved by adaptive regulation of the triple-helix chains by fine-tuning the opening angle of flexible V-shaped organic linkers and rotation of its lateral conjugated groups to resist possible expansion, thus demonstrating the vital role of adaptive reorganization of triple-helix metal–organic chains as a molecular spring-like motif in crystal jumping.     

Super- and Ferroelastic Organic Semiconductors for Ultraflexible Single-Crystal Electronics

Like silicon, single crystals of organic semiconductors are pursued to attain intrinsic charge transport properties. However, they are intolerant to mechanical deformation, impeding their application in flexible electronic devices. Such contradictory properties, namely exceptional molecular ordering and mechanical flexibility, are unified in this work. We found that bis(triisopropylsilylethynyl)pentacene (TIPS-P) crystals can undergo mechanically induced structural transitions to exhibit superelasticity and ferroelasticity. These properties arise from cooperative and correlated molecular displacements and rotations in response to mechanical stress. By utilizing a bending-induced ferroelastic transition of TIPS-P, flexible single-crystal electronic devices were obtained that can tolerate strains (ϵ) of more than 13 % while maintaining the charge carrier mobility of unstrained crystals (μ>0.7 μ₀). Our work will pave the way for high-performance ultraflexible single-crystal organic electronics for sensors, memories, and robotic applications.     

Superelastic Organic Crystals

Superelastic materials (crystal‐to‐crystal transformation pseudo elasticity) that consist of organic components have not been observed since superelasticity was discovered in a Au‐Cd alloy in 1932. Superelastic materials have been exclusively developed in metallic or inorganic covalent solids, as represented by Ti‐Ni alloys. Organosuperelasticity is now revealed in a pure organic crystal of terephthalamide, which precisely produces a large motion with high repetition and high energy storage efficiency. This process is driven by a small shear stress owing to the low density of strain energy related to the low lattice energy.     

Extensively Reversible Thermal Transformations of a Bistable,Fluorescence‐Switchable Molecular Solid: Entry into Functional Molecular Phase‐Change Materials

Functional phase‐change materials (PCMs) are conspicuously absent among molecular materials in which the various attributes of inorganic solids have been realized. While organic PCMs are primarily limited to thermal storage systems, the amorphous–crystalline transformation of materials like Ge‐Sb‐Te find use in advanced applications such as information storage. Reversible amorphous–crystalline transformations in molecular solids require a subtle balance between robust supramolecular assembly and flexible structural elements. We report novel diaminodicyanoquinodimethanes that achieve this transformation by interlinked helical assemblies coupled with conformationally flexible alkoxyalkyl chains. They exhibit highly reversible thermal transformations between bistable (crystalline/amorphous) forms, along with a prominent switching of the fluorescence emission energy and intensity.     

Light‐Induced Bending of Needle‐Like Crystals of Naphthylvinylbenzoxazole Triggered by trans–cis Isomerization

New diarylethene derivatives containing benzoxazole ( NBO ) and benzothiazole ( NBT ) have been synthesized. Light‐induced trans–cis isomerization of NBO and NBT took place in crystals, and only induced the needle‐like crystals of NBO to bend backwards away from the UV light source. The movement of the atoms was deemed to take place during the isomerization of NBO ; hence, strain would be produced and accumulated rapidly in the surface of crystals exposed to UV light. The uniform release of strain led to the bending of needle‐like crystals. The light‐induced trans–cis isomerization efficiency of NBT was too low to drive the motion of crystals, which might have originated from the large repulsion between naphthyl and benzothiazole. These results provide a new platform for the transformation of light energy into mechanical energy in molecular crystals through the unimolecular photochemical reaction of diarylethene derivatives.     

Mineralization‐Inspired Synthesis of Magnetic Zeolitic Imidazole Framework Composites

Metal–organic frameworks (MOFs) capable of mobility and manipulation are attractive materials for potential applications in targeted drug delivery, catalysis, and small‐scale machines. One way of rendering MOFs navigable is incorporating magnetically responsive nanostructures, which usually involve at least two preparation steps: the growth of the magnetic nanomaterial and its incorporation during the synthesis of the MOF crystals. Now, by using optimal combinations of salts and ligands, zeolitic imidazolate framework composite structures with ferrimagnetic behavior can be readily obtained via a one‐step synthetic procedure, that is, without the incorporation of extrinsic magnetic components. The ferrimagnetism of the composite originates from binary oxides of iron and transition metals such as cobalt. This approach exhibits similarities to the natural mineralization of iron oxide species, as is observed in ores and in biomineralization.     

Detailed Investigation of the Structural,Thermal, and Electronic Properties of Gold Isocyanide Complexes with Mechano‐Triggered Single‐Crystal‐to‐Single‐Crystal Phase Transitions

Mechano‐induced phase transitions in organic crystalline materials, which can alter their properties, have received much attention. However, most mechano‐responsive molecular crystals exhibit crystal‐to‐amorphous phase transitions, and the intermolecular interaction patterns in the daughter phase are difficult to characterize. We have investigated phenyl(phenylisocyanide)gold(I) ( 1 ) and phenyl(3,5‐dimethylphenylisocyanide)gold(I) ( 2 ) complexes, which exhibit a mechano‐triggered single‐crystal‐to‐single‐crystal phase transition. Previous reports of complexes 1 and 2 have focused on the relationships between the crystalline structures and photoluminescence properties; in this work we have focused on other aspects. The face index measurements of complexes 1 and 2 before and after the mechano‐induced phase transitions have indicated that they undergo non‐epitaxial phase transitions without a rigorous orientational relationship between the mother and daughter phases. Differential scanning calorimetry analyses revealed the phase transition of complex 1 to be enthalpically driven by the formation of new aurophilic interactions. In contrast, the phase transition of complex 2 was found to be entropically driven, with the closure of an empty void in the mother phase. Scanning electron microscopy observation showed that the degree of the charging effect of both complexes 1 and 2 was changed by the phase transitions, which suggests that the formation of the aurophilic interactions affords more effective conductive pathways. Moreover, flash‐photolysis time‐resolved microwave conductivity measurements revealed that complex 1 increased in conductivity after the phase change, whereas the conductivity of complex 2 decreased. These contrasting results were explained by the different patterns in the aurophilic interactions. Finally, an intriguing disappearing polymorphism of complex 2 has been reported, in which a polymorph form could not be obtained again after some period of time, even with repeated trials. The present studies provide us with a variety of hitherto unknown insights into mechano‐responsive molecular crystals, which help us to understand the phase transition behaviors upon mechanical stimulation and establish rational design principles.     

Thermally Driven Polymorphic Transition Prompting a Naked‐Eye‐Detectable Bending and Straightening Motion of Single Crystals

The amplification of molecular motions so that they can be detected by the naked eye (10⁷‐fold amplification from the ångström to the millimeter scale) is a challenging issue in the development of mechanical molecular devices. In this context, the perfectly ordered molecular alignment of the crystalline phase has advantages, as demonstrated by the macroscale mechanical motions of single crystals upon the photochemical transformation of molecules. In the course of our studies on thermoresponsive amphiphiles containing tetra(ethylene glycol) (TEG) moieties, we serendipitously found that thermal conformational changes of TEG units trigger a single‐crystal‐to‐single‐crystal polymorphic phase transition. The single crystal of the amphiphile undergoes bending and straightening motion during both heating and cooling processes at the phase‐transition temperatures. Thus, the thermally triggered conformational change of PEG units may have the advantage of inducing mechanical motion in bulk materials.     

Superelastic Shape Recovery of Mechanically Twinned 3,5‐Difluorobenzoic Acid Crystals

Generally, superelastic behavior cannot be expected in mechanically twinned crystals because there is essentially no strain on the interface that is a driving force for spontaneous shape recovery. However, we found that single crystals of 3,5‐difluorobenzoic acid are superelastic organic crystals under mechanical twinning. The unexpected shape recovery can be explained by molecular distortion on the twinning interface, which suggests a new mechanism for superelasticity in molecular materials.     

Fabrication of Photoactuators: Macroscopic Photomechanical Responses of Metal–Organic Frameworks to Irradiation by UV Light

Photoreactive olefinic species are incorporated into a metal–organic framework (MOF), [Zn(bdc)(3‐F‐spy)] ( 1 ). Single crystals of 1 are shown to undergo three types of photomechanical macroscopic deformation upon illumination by UV light. To demonstrate the practical potential of this system, the inclusion of 1 in a PVA (polyvinyl alcohol) composite membrane, by exploiting hydrogen‐bonding interactions, is presented. Using this composite membrane, the amplification of mechanical stress to achieve macroscopic actuation behavior is demonstrated. These results pave the way for the generation of MOF‐based soft photoactuators that produce clearly defined mechanical responses upon irradiation with light. Such systems are anticipated to have considerable potential in photomechanical energy harvesting and conversion systems.     

Nanoindentation in Crystal Engineering: Quantifying Mechanical Properties of Molecular Crystals

Nanoindentation is a technique for measuring the elastic modulus and hardness of small amounts of materials. This method, which has been used extensively for characterizing metallic and inorganic solids, is now being applied to organic and metal–organic crystals, and has also become relevant to the subject of crystal engineering, which is concerned with the design of molecular solids with desired properties and functions. Through nanoindentation it is possible to correlate molecular‐level properties such as crystal packing, interaction characteristics, and the inherent anisotropy with micro/macroscopic events such as desolvation, domain coexistence, layer migration, polymorphism, and solid‐state reactivity. Recent developments and exciting opportunities in this area are highlighted in this Minireview.