Periodic Oscillatory Motion of a Self-Propelled Motor Driven by Decomposition of H2O2 by Catalase

A self-propelled motor driven by the enzymatic reaction of catalase adsorbed onto a filter paper floating on an aqueous solution of H₂O₂ was used to study nonlinear behavior in the motor's motion. An increase in the concentration of H₂O₂ resulted in a change from no motion to irregular oscillatory motion, periodic oscillatory motion, and continuous motion. The mechanisms underlying oscillation and mode bifurcation are discussed based on experimental results on O₂ bubble formation and growth on the underside of the motor.     

基于 H2/O2 等离子体和钛硅沸石的丙烯气相环氧化方法

 将 H₂/O₂ 非平衡等离子体现场产生的气态 H₂O₂和丙烯与耦合反应器中钛硅沸石 TS-1 直接接触, 实现了丙烯气相环氧化反应. 结果表明, 非平衡等离子体生成气态 H₂O₂ 的速率由介质阻挡放电的输入功率决定, 环氧丙烷的生成速率和选择性取决于钛硅沸石催化剂和反应条件. 在 H₂ 和 O₂ 进料流量分别为 170 和 8 ml/min, 介质阻挡放电输入功率为 3.5 W, 环氧化反应温度为 110 ^oC, 丙烯进料量为 18 ml/min, 催化剂用量为 0.8 g 的条件下, 生成环氧丙烷产率达 246.9 g/(kg•h)、环氧丙烷选择性和 H₂O₂ 有效利用率分别为 95.4% 和 36.1%, 反应 36 h 内未见催化剂失活.     

Solar-to-H2O2 Catalyzed by Covalent Organic Frameworks

Benefiting from the excellent structural tunability, robust framework, ultrahigh porosity, and rich active sites, covalent organic frameworks (COFs) are widely recognized as promising photocatalysts in chemical conversions, and emerged in the hydrogen peroxide (H₂O₂) photosynthesis in 2020. H₂O₂, serving as an environmental-friendly oxidant and a promising liquid fuel, has attracted increasing researchers to explore its potential. Over the past few years, numerous COFs-based photocatalysts are developed with encouraging achievements in H₂O₂ production, whereas no comprehensive review articles exist to summarize this specific and significant area. Herein we provide a systematic overview of the advances and challenges of COFs in photocatalytic H₂O₂ production. We first introduce the priorities of COFs in H₂O₂ photosynthesis. Then, various strategies to improve COFs photocatalytic efficiency are discussed. The perspective and outlook for future advances of COFs in this emerging field are finally offered. This timely review will pave the way for the development of highly efficient COFs photocatalysts for practical production of value-added chemicals not limited to H₂O₂.     

On-Demand Synthesis of H2O2 by Water Oxidation for Sustainable Resource Production and Organic Pollutant Degradation

H₂O₂ is a versatile and environmentally friendly chemical involved in water treatment, such as advanced oxidation processes. Anthraquinone oxidation is widely used for large-scale production of H₂O₂, which requires significant energy input and periodic replacement of the carrier molecule. H₂O₂ production should be customized considering the specific usage scenario. Electrochemical synthesis of H₂O₂ can be adopted as alternatives to traditional method, which avoids concentration, transportation, and storage processes. Herein, we identified Bi₂WO₆:Mo as a low-cost and high-selectivity choice from a series of Bi-based oxides for H₂O₂ generation via two-electron water oxidation reaction. It can continuously provide H₂O₂ for in situ degradation of persistent pollutants in aqueous solution. Clean energy from H₂ can also be produced at the cathode. This kind of water splitting producing sustainable resources of H₂O₂ and H₂ is an advance in environmental treatment and energy science.     

Study of the pyrolysis of H2O2 in the presence of H2and CO by use of UV absorption of HO2

In dissociation experiments of H₂O₂ under shock wave conditions, the spectra of H₂O₂ and HO₂ have been observed in the UV at 2200 ≤ 2800 Å. By the use of these spectra the H₂O₂ decomposition in the presence of H₂ and CO at 870 ≤ T ≤ 1000°K has been analyzed. It was found that in this temperature range, in contrast to low temperature behavior, reactions of H atoms with H₂O₂ and with HO₂ are equally important. The rate of the reaction H + H₂O₂ ← HO₂ + H₂ was estimated in comparison with the rate of the reaction between H and HO₂. Good agreement between calculated and measured concentration profiles of HO₂ and H₂O₂ was obtained.     

Direct Synthesis of H2O2 by a H2/O2 Fuel Cell

Direct synthesis of H₂O₂ solutions by a fuel cell method was reviewed. The fuel cell reactor of [O₂, gas-diffusion cathode electrolyte solutions Nafion membrane electrolyte solutions gas-diffusion anode, H₂] is very effective for formation of H₂O₂. The three-phase boundary (O₂(g)–electrode(s)–electrolyte(l)) in the gas-diffusion cathode is essential for efficient formation of H₂O₂. Fast diffusion processes of O₂ to the active surface and of H₂O₂ to the bulk electrolyte solutions are essential for H₂O₂ accumulation. The maxima H₂O₂ concentrations of 1.2 M (3.5 wt%) and 2.4 M (7.0 wt%) were accomplished by the heat-treated Mn-OEP/AC electrocatalyst with H₂SO₄ electrolyte and by the VGCF electrocatalyst with NaOH electrolyte, respectively, under short circuit conditions.     

An H2O2 Molecule Stabilized inside Open-Cage C60 Derivatives by a Hydroxy Stopper

An H₂O₂ molecule was isolated inside hydroxylated open-cage fullerene derivatives by mixing an H₂O₂ solution with a precursor molecule followed by reduction of one of carbonyl groups on its orifice. Depending on the reduction site, two structural isomers for H₂O₂@open-fullerenes were obtained. A high encapsulation ratio of 81 % was attained at low temperature. The structures of the peroxosolvate complexes thus obtained were studied by ¹H NMR spectroscopy, X-ray analysis, and DFT calculations, showing strong hydrogen bonding between the encapsulated H₂O₂ and the hydroxy group located at the center of the orifice. This OH group was found to act as a kinetic stopper, and the formation of the hydrogen bonding caused thermodynamic stabilization of the H₂O₂ molecule, both of which prevent its escape from the cage. One of the peroxosolvates was isolated by HPLC, affording H₂O₂@open-fullerene with 100 % encapsulation ratio, likely due to the intramolecular hydrogen-bonding interaction.     

Boosting Selective Oxidation of Ethylene to Ethylene Glycol Assisted by In situ Generated H2O2 from O2 Electroreduction

Ethylene glycol is a useful organic compound and chemical intermediate for manufacturing various commodity chemicals of industrial importance. Nevertheless, the production of ethylene glycol in a green and safe manner is still a long-standing challenge. Here, we established an integrated, efficient pathway for oxidizing ethylene into ethylene glycol. Mesoporous carbon catalyst produces H₂O₂, and titanium silicalite-1 catalyst would subsequently oxidize ethylene into ethylene glycol with the in situ generated H₂O₂. This tandem route presents a remarkable activity, i.e., 86 % H₂O₂ conversion with 99 % ethylene glycol selectivity and 51.48 mmol g_ecat⁻¹ h⁻¹ production rate at 0.4 V vs. reversible hydrogen electrode. Apart from generated H₂O₂ as an oxidant, there exists ⋅OOH intermediate which could omit the step of absorbing and dissociating H₂O₂ over titanium silicalite-1, showing faster reaction kinetics compared to the ex situ one. This work not only provides a new idea for yielding ethylene glycol but also demonstrates the superior of in situ generated H₂O₂ in tandem route.     

Promoting Piezocatalytic H2O2 Production in Pure Water by Loading Metal-Organic Cage-Modified Gold Nanoparticles on Graphitic Carbon Nitride

Piezocatalytic hydrogen peroxide (H₂O₂) production is a green synthesis method, but the rapid complexation of charge carriers in piezocatalysts and the difficulty of adsorbing substrates limit its performance. Here, metal-organic cage-coated gold nanoparticles are anchored on graphitic carbon nitride (MOC-AuNP/g-C₃N₄) via hydrogen bond to serve as the multifunctional sites for efficient H₂O₂ production. Experiments and theoretical calculations prove that MOC-AuNP/g-C₃N₄ simultaneously optimize three key parts of piezocatalytic H₂O₂ production: i) the MOC component enhances substrate (O₂) and product (H₂O₂) adsorption via host–guest interaction and hinders the rapid decomposition of H₂O₂ on MOC-AuNP/g-C₃N₄, ii) the AuNP component affords a strong interfacial electric field that significantly promotes the migration of electrons from g-C₃N₄ for O₂ reduction reaction (ORR), iii) holes are used for H₂O oxidation reaction (WOR) to produce O₂ and H⁺ to further promote ORR. Thus, MOC-AuNP/g-C₃N₄ can be used as an efficient piezocatalyst to generate H₂O₂ at rates up to 120.21 μmol g⁻¹ h⁻¹ in air and pure water without using sacrificial agents. This work proposes a new strategy for efficient piezocatalytic H₂O₂ synthesis by constructing multiple active sites in semiconductor catalysts via hydrogen bonding, by enhancing substrate adsorption, rapid separation of electron-hole pairs and preventing rapid decomposition of H₂O₂.     

Free Superoxide is an Intermediate in the Production of H2O2 by Copper(I)‐Aβ Peptide and O2

Oxidative stress is considered as an important factor and an early event in the etiology of Alzheimer's disease (AD). Cu bound to the peptide amyloid‐β (Aβ) is found in AD brains, and Cu‐Aβ could contribute to this oxidative stress, as it is able to produce in vitro H₂O₂ and HO^. in the presence of oxygen and biological reducing agents such as ascorbate. The mechanism of Cu‐Aβ‐catalyzed H₂O₂ production is however not known, although it was proposed that H₂O₂ is directly formed from O₂ via a 2‐electron process. Here, we implement an electrochemical setup and use the specificity of superoxide dismutase‐1 (SOD1) to show, for the first time, that H₂O₂ production by Cu‐Aβ in the presence of ascorbate occurs mainly via a free O₂^.? intermediate. This finding radically changes the view on the catalytic mechanism of H₂O₂ production by Cu‐Aβ, and opens the possibility that Cu‐Aβ‐catalyzed O₂^.? contributes to oxidative stress in AD, and hence may be of interest.     

Elucidation of methyl tert-butyl ether degradation with Fe/H2O2 by purge-and-trap gas chromatography-mass spectrometry

Degradation of methyl tert-butyl ether (MTBE) with Fe²⁺/H₂O₂ was studied by purge-and-trap gas chromatography-mass spectrometry. MTBE was degraded 99% within 120 min under optimum conditions. MTBE was firstly degraded rapidly based on a Fe²⁺/H₂O₂ reaction and then relatively slower based on a Fe³⁺/H₂O₂ reaction. The dissolved oxygen decreased rapidly in the Fe²⁺/H₂O₂ reaction stage, but showed a slow increase in the Fe³⁺/H₂O₂ reaction stage. tert-Butyl formate, tert-butyl alcohol, methyl acetate and acetone were identified as primary degradation products by mass spectrometry. A preliminary reaction mechanism involving two different pathways for the degradation of MTBE with Fe²⁺/H₂O₂ was proposed. This study suggests that degradation of MTBE can be achieved using the Fe²⁺/H₂O₂ process.     

Contact-electro-catalysis for Direct Synthesis of H2O2 under Ambient Conditions

Hydrogen peroxide (H₂O₂) is an indispensable basic reagent in various industries, such as textile bleach, chemical synthesis, and environmental protection. However, it is challenging to prepare H₂O₂ in a green, safe, simple and efficient way under ambient conditions. Here, we found that H₂O₂ could be synthesized using a catalytic pathway only by contact charging a two-phase interface at room temperature and normal pressure. Particularly, under the action of mechanical force, electron transfer occurs during physical contact between polytetrafluoroethylene particles and deionized water/O₂ interfaces, inducing the generation of reactive free radicals (⋅OH and ⋅O₂⁻ ), and the free radicals could react to form H₂O₂, yielding as high as 313 μmol L⁻¹ h⁻¹. In addition, the new reaction device could show long-term stable H₂O₂ production. This work provides a novel method for the efficient preparation of H₂O₂, which may also stimulate further explorations on contact-electrification-induced chemistry process.     

Activation and transfer of oxygen—IX : Nonenzymic hydroxylation of phenylalanine by model systems of dihydroalloxazine/O2 dihydroalloxazine/H2O2 and alloxazinium cation/H2O

Efficient hydroxylations were effected without addition of metal compounds. In the dihydroalloxazine system HO· radicals were the hydroxylating species according to the stoichiometry and the distribution of the hydroxyphenylalanine isomers. The OH radicals were generated in one-electron reductions of A^R-OOH or H₂O₂, in which a dihydroalloxazine or a semiquinone acted as the reducing agent. The yield of hydroxylation varied in dependence on the further oxidation of the hydroxycyclohexadienyl radicals. Quantitative disproportionation occurred in 6N H₂SO₄, while an attack by O₂, H₂O₂ or A^R-OOH predominated in the pH region 0–7. The influence of a HO- consuming aliphatic compound e.g. EDTA was studied.Hydroxylating species are also formed in the attack of an alloxazinium cation by H₂O₂, depending on the acidity of the medium.     

Efficient removal of tetracycline by H2O2 activated with iron-doped biochar: Performance,mechanism, and degradation pathways

In this study,novel iron-doped biochar（Fe-BC） was produced using a simple method,and it was used as an H₂ O₂ activator for tetracycline（TC） degradation.Generally,iron loading can improve the separation performance and reactivity of biochar（BC）.In the Fe-BC/H₂ O₂ system,92% of the TC was removed within 30 min with the apparent rate constant(k_obs) of 0.155 min^-1,which was 23.85 times that in the case of the BC/H₂ O_2<...     

Skin Bond Electron Relaxation Dynamics of Germanium Manipulated by Interactions with H2, O2, H2O,H2O2, HF,and Au

Although germanium performs amazingly well at sites surrounding hetero‐coordinated impurities and under‐coordinated defects or skins with unusual properties, having important impact on electronic and optical devices, understanding the behavior of the local bonds and electrons at such sites remains a great challenge. Here we show that a combination of density functional theory calculations, zone‐resolved X‐ray photoelectron spectroscopy, and bond order length strength correlation mechanism has enabled us to clarify the physical origin of the Ge 3d core‐level shift for the under‐coordinated (111) and (100) skin with and without hetero‐coordinated H₂, O₂, H₂O, H₂O₂, HF impurities. The Ge 3d level shifts from 27.579 (for an isolated atom) by 1.381 to 28.960 eV upon bulk formation. Atomic under‐coordination shifts the binding energy further to 29.823 eV for the (001) and to 29.713 eV for the (111) monolayer skin. Addition of O₂, HF, H₂O, H₂O₂ and Au impurities results in quantum entrapment by different amounts, but H adsorption leads to polarization.     

A quantitative colorimetric assay of H2O2 and glucose using silver nanoparticles induced by H2O2 and UV

A simple spectrophotometric assay of H2O2 and glucose using Ag nanoparticles has been carried out. Relying on the synergistic effect of H2O2 reduction and ultraviolet （UV） irradiation, Ag nanoparticles with enhanced absorption signals were synthesized. H2O2 served as a reducing agent in the Ag nanoparticles formation in which Ag＋ was reduced to Ago by O2- generated via the decomposition of H2O2 in alkaline media. On the other hand, photoreduction of Ag＋ to Ago under UV irradiations also contributed to the nanoparticles formation. The synthesized nanoparticles were characterized by TEM, XPS, and XRD. The proposed method could determine H2O2 with concentrations ranging from 5.0× 10^-7 to 6.0× 10^-5 tool/ L The detection limit was estimated to be 2.0 × 10^-7 mol/L. Since the conversion of glucose to gluconic acid catalyzed by glucose oxidase was companied with the formation of H2O2, the sensing protocol has been successfully utilized for the determination of glucose in human blood samples. The results were in good agreement with those determined by a local hospital. This colorimetric sensor thus holds great promises in clinical applications.     

Oxidative Degradation of 2,4‐Dihydroxybenzoic Acid by the Fenton and Photo‐Fenton Processes: Kinetics,Mechanisms, and Evidence for the Substitution of H2O2 by O2

The kinetics and mechanisms of the oxidative degradation of 2,4‐dihydroxybenzoic acid (2,4‐DHBA) by the Fenton and photo‐Fenton processes were investigated in detail by a combination of HPLC, IC, and TOC analyses. The formation of 2,3,4‐trihydroxybenzoic acid (2,3,4‐THBA) at an early oxidation stage shows that hydroxylation of the aromatic ring is the first step of the process. This intermediate was able to reduce Fe^III and to contribute to the recycling of Fe^II. Complete mineralization could only be achieved under irradiation (photo‐Fenton). A detailed study of the dependence of the rate of mineralization on the concentration of H₂O₂ and dissolved O₂ was carried out. It was found that, even at a low initial concentration of H₂O₂, mineralization by the photo‐Fenton process was complete in a relatively short time, provided that the O₂ concentration was high enough, indicating that O₂ may, at least in part, substitute H₂O₂. Channeling reaction pathways toward O₂ rather than H₂O₂ consumption is of particular interest for the technical development of the photo‐Fenton process.     

H2O2-photosensitized emulsion copolymerization of tetrafluoroethylene with propylene

The H₂O₂-photosensitized emulsion copolymerization of tetrafluoroethylene with propylene was carried out at room temperature in the presence of gaseous monomers of 50 mole-% tetrafluoroethylene content. The conversion increased almost linearly with irradiation time. The rate of polymerization was proportional to the 1.0 power of H₂O₂ concentration up to 3.5 × 10^?3M H₂O₂ and the 0.46 power of H₂O₂ concentration above 3.5 × 10^?3M H₂O₂. The result obtained at low H₂O₂ concentration was almost consistent with that obtained in the radiation-induced method. The rate of polymerization was proportional to the 0.58 power of the emulsifier concentration, and the degree of polymerization was independent of the emulsifier concentration. The H₂O₂-photosensitized emulsion copolymerization of tetrafluoroethylene with propylene is terminated mainly by degradative chain transfer of the propagating radical to propylene at low H₂O₂ concentration and by the reaction of the propagating radical with OH radical from photolysis of H₂O₂–aqueous solution at high H₂O₂ concentration.     

Effects of cationic and anionic micelles on the redox reaction of Erythrosine B by H2O2 in presence of Cu-Fe nanoparticles

Kinetic investigation of the degradation of Erythrosine B (EB) by H₂O₂ and copper-iron bimetallic nanoparticles was carried out spectrophotometrically. The degradation was carried out under the condition of sonication at 40°C. The co-precipitation method was used for the fabrication of CuO/Fe₂O₃ (Cu-Fe) in an alkaline solution and characterized by SEM, XRD, FTIR, TEM, EDS, and BET methods. In the absence of the Cu-Fe, no degradation of EB by H₂O₂ was observed. The presence of Cu-Fe resulted into the degradation of EB by H₂O₂. The kinetics of the degradation was studied under the conditions of variation of the amount of nanoparticles and at different concentrations of EB, H₂O₂, H⁺, surfactants (sodium dodecyl sulphate; SDS and cetyltrimethylammonium bromide; CTABr). The rate of reaction depends on the amount of Cu-Fe and [H₂O₂]. The rate constant values gave the peaked like curve (with maximum value at pH 3) at different pH. The dye degradation decreased with the increase in presence of (SDS) and (CTABr).