Benzene-1,3,5-tricarboxamide: a versatile ordering moiety for supramolecular chemistry

After their first synthesis in 1915 by Curtius, benzene-1,3,5-tricarboxamides (BTAs) have become increasingly important in a wide range of scientific disciplines. Their simple structure and wide accessibility in combination with a detailed understanding of their supramolecular self-assembly behaviour allow full utilization of this versatile, supramolecular building block in applications ranging from nanotechnology to polymer processing and biomedical applications. While the opportunities in the former cases are connected to the self-assembly of BTAs into one-dimensional, nanometer-sized rod like structures stabilised by threefold H-bonding, their multivalent nature drives applications in the biomedical field. This review summarises the different types of BTAs that appeared in the recent literature and the applications they have been evaluated in. Currently, the first commercial applications of BTAs are emerging. The adaptable nature of this multipurpose building block promises a bright future.     

An Alignment Medium for Measuring Residual Dipolar Couplings in Pure DMSO: Liquid Crystals from Graphene Oxide Grafted with Polymer Brushes

Residual dipolar couplings (RDCs) have attracted attention in light of their great impact on the structural elucidation of organic molecules. However, the effectiveness of RDC measurements is limited by the shortage of alignment media compatible with widely used organic solvents, such as DMSO. Herein, we present the first liquid crystal (LC) based alignment medium that is compatible with pure DMSO, thus enabling RDC measurements of polar and intermediate polarity molecules. The liquid crystals were obtained by grafting polymer brushes onto graphene oxide (GO) using free radical polymerization. The resulting new medium offers several advantages, such as absence of background signals, narrow line shapes, and tunable alignment. Importantly, this medium is compatible with π‐conjugated molecules. Moreover, sonication‐induced fragmentation can reduce the size of GO sheets. The resulting anisotropic medium has moderate alignment strength, which is a prerequisite for an accurate RDC measurement.     

Dynamic Supramolecular Polymers Based on Benzene‐1,3,5‐tricarboxamides: The Influence of Amide Connectivity on Aggregate Stability and Amplification of Chirality

N‐Centred benzene‐1,3,5‐tricarboxamides (N‐BTAs) composed of chiral and achiral alkyl substituents were synthesised and their solid‐state behaviour and self‐assembly in dilute alkane solutions were investigated. A combination of differential scanning calorimetry (DSC), polarisation optical microscopy (POM) and X‐ray diffraction revealed that the chiral N‐BTA derivatives with branched 3,7‐dimethyloctanoyl chains were liquid crystalline and the mesophase was assigned as Col_ho. In contrast, N‐BTA derivatives with linear tetradecanoyl or octanoyl chains lacked a mesophase and were obtained as crystalline compounds. Variable‐temperature infrared spectroscopy showed the presence of threefold, intermolecular hydrogen bonding between neighbouring molecules in the mesophase of the chiral N‐BTAs. In the crystalline state at room temperature a more complicated packing between the molecules was observed. Ultraviolet and circular dichroism spectroscopy on dilute solutions of N‐BTAs revealed a cooperative self‐assembly behaviour of the N‐BTA molecules into supramolecular polymers with preferred helicity when chiral alkyl chains were present. Both the sergeants‐and‐soldiers as well as the majority‐rules principles were operative in stacks of N‐BTAs. In fact, the self‐assembly of N‐BTAs resembles closely that of their carbonyl (C?O)‐centred counterparts, with the exception that aggregation is weaker and amplification of chirality is less pronounced. The differences in the self‐assembly of N‐ and C?O‐BTAs were analysed by density functional theory (DFT) calculations. These reveal a substantially lower interaction energy between the monomeric units in the supramolecular polymers of N‐BTAs. The lower interaction energy is due to the higher energy penalty for rotation around the Ph? NH bond compared to the Ph? CO bond and the diminished magnitude of dipole–dipole interactions. Finally, we observed that mixed stacks are formed in dilute solution when mixing N‐BTAs and C?O BTAs.     

Valve leaflet‐inspired elastomeric scaffolds with tunable and anisotropic mechanical properties

Fibrous scaffolds, which can mimic the elastic and anisotropic mechanical properties of native tissues, hold great promise in recapitulating the native tissue microenvironment. We previously fabricated electrospun fibrous scaffolds made of hybrid synthetic elastomers (poly(1,3‐diamino‐2‐hydroxypropane‐co‐glycerol sebacate)‐co‐poly (ethylene glycol) (APS‐co‐PEG) and polycaprolactone (PCL)) to obtain uniaxial mechanical properties similar to those of human aortic valve leaflets. However, conventional electrospinning process often yields scaffolds with random alignment, which fails to recreate the anisotropic nature of most of the soft tissues such as native heart valves. Inspired by the structure of native valve leaflet, we designed a novel valve leaflet‐inspired ring‐shaped collector to modulate the electrospun fiber alignment and studied the effect of polymer formulation (PEG amount [mole %] in APS‐co‐PEG; ratio between APS‐co‐PEG and PCL; and total polymer concentration) in tuning the biaxial mechanical properties of the fibrous scaffolds. The fibrous scaffolds collected on the ring‐shaped collector displayed anisotropic biaxial mechanical properties, suggesting that their biaxial mechanical properties are closely associated with the fiber alignment in the scaffold. Additionally, the scaffold stiffness was easily tuned by changing the composition and concentration of the polymer blend. Human valvular interstitial cells (hVICs) cultured on these anisotropic scaffolds displayed aligned morphology as instructed by the fiber alignment. Overall, we generated a library of biologically relevant fibrous scaffolds with tunable mechanical properties, which will guide the cellular alignment.     

A Radical Polymer as a Two‐Dimensional Organic Half Metal

Given that half‐metals are promising futuristic materials for spintronics, organic materials showing half‐metal character are highly desirable for spintronic devices, not only owing to their weak spin‐orbit and hyperfine interactions, but also their light and flexible properties. We predict that a two‐dimensional organic 2,4,6‐tri‐(1,3,5‐triazinyl)methyl radical polymer has half‐metallic properties as well as a spontaneous magnetic ordering at ambient temperature. The quantum transmission is studied based on the nonequilibrium Green function theory coupled with density functional theory. The half‐metallic property in the triazine‐based polymer depends mainly on the nature of the p‐band in contrast to of conventional half metals in which the nature of the d‐band is more important.     

Dual Photo‐functionalized Amphiphile for Photo‐reversible Liquid Crystal Alignments

Without the conventional polymer‐based liquid crystal (LC) alignment process, a newly synthesized dual photo‐functionalized amphiphile (abbreviated as ADMA₁) was successfully applied as a robust photo‐reversible LC alignment layer by self‐assembly and photo‐polymerization. The LC alignment layer constructed by directly adding dual photo‐functionalized amphiphiles into LC media significantly cuts the manufacturing cost as well as opens new doors for the fabrication of novel electro‐optical devices.     

A Modular Approach to Introduce Function into Single‐Chain Polymeric Nanoparticles

Here, a modular approach is reported to introduce a specific function into single‐chain polymeric nanoparticles (SCPNs). Hereto, an amphiphilic polymer with pendant benzene‐1,3,5‐tricarboxamide (BTA) units is mixed with a “free” BTA that contains a functional group, either a fluorescent naphthalimide or a catalytically active l ‐proline. Taking advantage of hydrophobic interactions and self‐recognition properties of the BTA units, the “free” BTAs are captured into the interior of the SCPN in water as evidenced by fluorescence studies. To illustrate that function can be readily introduced using a modular approach, l ‐proline‐based BTAs are incorporated to procure a catalytically active SCPN in water. The aldol reaction between p‐nitrobenzaldehyde and cyclohexanone shows good conversions at low catalyst loadings and substrate concentrations, and high stereoselectivities are obtained (de = 91% and ee = 98%).

     

Bioinspired,Size‐Tunable Self‐Assembly of Polymer–Lipid Bilayer Nanodiscs

Polymer‐based nanodiscs are valuable tools in biomedical research that can offer a detergent‐free solubilization of membrane proteins maintaining their native lipid environment. Herein, we introduce a novel ca. 1.6 kDa SMA‐based polymer with styrene:maleic acid moieties that can form nanodiscs containing a planar lipid bilayer which are useful to reconstitute membrane proteins for structural and functional studies. The physicochemical properties and the mechanism of formation of polymer‐based nanodiscs are characterized by light scattering, NMR, FT‐IR, and TEM. A remarkable feature is that nanodiscs of different sizes, from nanometer to sub‐micrometer diameter, can be produced by varying the lipid‐to‐polymer ratio. The small‐size nanodiscs (up to ca. 30 nm diameter) can be used for solution NMR spectroscopy studies whereas the magnetic‐alignment of macro‐nanodiscs (diameter of > ca. 40 nm) can be exploited for solid‐state NMR studies on membrane proteins.     

Bioinspired,Size‐Tunable Self‐Assembly of Polymer–Lipid Bilayer Nanodiscs

Polymer‐based nanodiscs are valuable tools in biomedical research that can offer a detergent‐free solubilization of membrane proteins maintaining their native lipid environment. Herein, we introduce a novel ca. 1.6 kDa SMA‐based polymer with styrene:maleic acid moieties that can form nanodiscs containing a planar lipid bilayer which are useful to reconstitute membrane proteins for structural and functional studies. The physicochemical properties and the mechanism of formation of polymer‐based nanodiscs are characterized by light scattering, NMR, FT‐IR, and TEM. A remarkable feature is that nanodiscs of different sizes, from nanometer to sub‐micrometer diameter, can be produced by varying the lipid‐to‐polymer ratio. The small‐size nanodiscs (up to ca. 30 nm diameter) can be used for solution NMR spectroscopy studies whereas the magnetic‐alignment of macro‐nanodiscs (diameter of > ca. 40 nm) can be exploited for solid‐state NMR studies on membrane proteins.     

Direct prediction of residual dipolar couplings of small molecules in a stretched gel by stochastic molecular dynamics simulations

Residual dipolar couplings are highly useful NMR parameters for calculating and refining molecular structures, dynamics, and interactions. For some applications, however, it is inevitable that the preferred orientation of a molecule in an alignment medium is calculated a priori. Several methods have been developed to predict molecular orientations and residual dipolar couplings. Being beneficial for macromolecules and selected small‐molecule applications, such approaches lack sufficient accuracy for a large number of organic compounds for which the fine structure and eventually the flexibility of all involved molecules have to be considered or are limited to specific, well‐studied liquid crystals. We introduce a simplified model for detailed all‐atom molecular dynamics calculations with a polymer strand lined up along the principal axis as a new approach to simulate the preferred orientation of small to medium‐sized solutes in polymer‐based, gel‐type alignment media. As is shown by a first example of strychnine in a polystyrene/CDCl₃ gel, the simulations potentially enable the accurate prediction of residual dipolar couplings taking into account structural details and dynamic averaging effects of both the polymer and the solute. Copyright © 2015 John Wiley & Sons, Ltd.     

Supramolecular Copolymerization as a Strategy to Control the Stability of Self‐Assembled Nanofibers

A major challenge in supramolecular polymerization is controlling the stability of the polymers formed, that is, controlling the rate of monomer exchange in the equilibrium between monomer and polymer. The exchange dynamics of supramolecular polymers based on benzene‐1,3,5‐tricarboxamide (BTA) can be regulated by copolymerizing molecules with dendronized (dBTA) and linear (nBTA) ethylene glycol‐based water‐soluble side chains. Whereas nBTAs form long nanofibers in water, dBTAs do not polymerize, forming instead small spherical aggregates. The copolymerization of the two BTAs results in long nanofibers. The exchange dynamics of both the BTA monomers in the copolymer are significantly slowed down in the mixed systems, leading to a more stable copolymer, while the morphology and spectroscopic signature of the copolymers are identical to that of nBTA homopolymer. This copolymerization is the supramolecular counterpart of styrene/ maleic anhydride copolymerization.     

Swelling‐Induced Chain Stretching Enhances Hydrolytic Degrafting of Hydrophobic Polymer Brushes in Organic Media

Hydrophilic polymer brushes grown via surface‐initiated polymerization from silicon oxide surfaces can detach or degraft in aqueous media. Degrafting of these chain end‐tethered polymers is believed to involve hydrolysis of bonds at the polymer–substrate interface. Degrafting so far has not been reported for hydrophobic polymer brushes in non‐aqueous media. This study has investigated the degrafting and swelling properties of poly(tert‐butyl methacrylate) (PtBMA) brushes in different water‐miscible, organic solvents, viz. DMF, acetone and THF. In the presence of a sufficient quantity of water in the organic solvent, degrafting was also observed for PtBMA brushes. More importantly, however, the rate of degrafting depended on the nature of the organic solvent and the apparent initial rate constant of the degrafting reaction was found to correlate with the swelling ratio of the polymer brush in the different solvents. This correlation is first, direct evidence in support of the hypothesis that degrafting is facilitated by a tension that acts on the bond(s) that tether the polymer chains to the surface and which is amplified upon swelling of the polymer brush.     

Formation of polymer microrods in shear flow by emulsification--solvent attrition mechanism

Rodlike polymer particles could have interesting properties and could find many practical applications; however, few methods for the production of such particles are available. We report a systematic study of a droplet shearing process for the formation of polymer rods with micrometer or submicrometer diameter and a length of up to tens of micrometers. The process is based on emulsification of a polymer solution under shear, combined with solvent attrition in the surrounding organic medium. The droplets deform and elongate into cylinders, which solidify when the solvent transfers to the dispersion medium. Stopped flow experiments allow distinguishing all stages of the mechanism. The results are interpreted on the basis of the theory of droplet elongation and breakup under shear. The effects of the viscosity ratio and shear stress are matched against the theoretical expectations. The method is simple, efficient, and scalable, and we demonstrate how it can be controlled and modified. The experimental parameters that allow varying the rod size and aspect ratio include shear rate, medium viscosity, and polymer concentration. Examples of the specific properties of the polymer rods, including self-organization, alignment in external fields and in fluid flows, and stabilization of bubbles, droplets, and capsules, are presented.     

Monosaccharides as Versatile Units for Water‐Soluble Supramolecular Polymers

We introduce monosaccharides as versatile water‐soluble units to compatibilise supramolecular polymers based on the benzene‐1,3,5‐tricarboxamide (BTA) moiety with water. A library of monosaccharide‐based BTAs is evaluated, varying the length of the alkyl chain (hexyl, octyl, decyl and dodecyl) separating the BTA and saccharide units, as well as the saccharide units (α‐glucose, β‐glucose, α‐mannose and α‐galactose). In all cases, the monosaccharides impart excellent water compatibility. The length of the alkyl chain is the determining factor to obtain either long, one‐dimensional supramolecular polymers (dodecyl spacer), small aggregates (decyl spacer) or molecularly dissolved (octyl and hexyl) BTAs in water. For the BTAs comprising a dodecyl spacer, our results suggest that a cooperative self‐assembly process is operative and that the introduction of different monosaccharides does not significantly change the self‐ assembly behaviour. Finally, we investigate the potential of post‐assembly functionalisation of the formed supramolecular polymers by taking advantage of dynamic covalent bond formation between the monosaccharides and benzoxaboroles. We observe that the supramolecular polymers readily react with a fluorescent benzoxaborole derivative permitting imaging of these dynamic complexes by confocal fluorescence microscopy.     

Synthesis of conjugated polymers possessing diketopyrrolopyrrole units bearing phenyl,pyridyl, and thiazolyl groups by direct arylation polycondensation: Effects of aromatic groups in DPP on physical properties

Conjugated polymers containing phenyl‐, pyridyl‐, and thiazolyl‐flanked diketopyrrolopyrrole (DPP) were synthesized by direct arylation polycondensation of 3,4‐ethylenedioxythiophene derivatives and dibrominated DPP‐based monomers, in order to probe the effects of the aromatic groups in the DPP units on the absorption property, energy level, and crystallinity. A polymer possessing thiazolyl‐flanked DPP units was found to display long‐wavelength absorption properties and higher crystallinity than the polymers bearing phenyl‐ and pyridyl‐flanked DPP units. These features of the thiazolyl‐based polymer were afforded by its coplanar structure of the main chain. The synthesized polymers showed semiconducting properties in organic field effect transistors and organic photovoltaics. Direct arylation polycondensation is an efficient synthetic method that affords a series of DPP‐based polymers in a simple fashion and, thus, helping in a comprehensive understanding on the relationship between the aromatic groups in DPP units and their physical properties. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2337–2345     

Miniaturized Molecularly Imprinted Continuous Polymer Rods

Molecularly imprinted continuous polymer rods are prepared inside PEEK tubes of 1 mm i. d. by an in situ preparation technique; and chiral separations on such media have been demonstrated. The miniaturized column filled with (–)‐cinchonidine‐imprinted or (+)‐cinchonine‐imprinted polymer rods based on a copolymer of 2‐(trifluoromethyl)acrylic acid and ethylene glycol dimethacrylate permitted diastereoseparation of (–)‐cinchonidine and (+)‐cinchonine; the template molecule is retained to a greater extent than the corresponding antipode. Increasing the amount of cyclohexanol in the polymerization mixture decreased the backpressure of the resultant rod and the addition of latex beads suspended in water to the prepolymerization mixture affected the selectivity and affinity of the imprinted polymer rods. The column length is adjusted easily by cutting, thus allowing easy control of retention behavior and analysis time.     

Synthesis and properties of photoalignable aromatic polyesters containing phenylenediacrylate units in their backbones and n‐alkyl moieties in their side groups

A series of poly[oxy(4‐n‐alkyl‐3,5‐benzoate)oxy‐1,4‐phenylenediacryloyl]s (PPDA‐CnBZ polymers) with high molecular weights was synthesized. These polymers exhibit excellent solubility in some common organic solvents and produce good quality films using conventional spin‐casting and drying processes. The polymers are thermally stable up to 357–362 °C in a nitrogen atmosphere; their glass transition temperatures are greater than 121 °C. The photoreactions and photoalignments of the polymers were investigated using ultraviolet‐visible and infrared spectroscopy, and their liquid crystal (LC) alignment properties were examined. The phenylenediacrylate (PDA) chromophores in the polyesters were found to mainly undergo photocyclization upon ultraviolet light irradiation. Irradiation of the polyester films with linearly polarized ultraviolet light (LPUVL) induces preferential orientation of the polymer main chains, while the unreacted PDA chromophores are aligned along the direction perpendicular to the electric vector of the LPUVL. All the films irradiated with LPUVL were found to align LCs in a direction perpendicular to the electric vector of the LPUVL. Moreover, these LC alignments persisted even on irradiated films annealed at temperatures up to 210 °C, which is much higher than the glass transition temperatures of the polyesters. These LC alignment characteristics are due to the anisotropic interactions of the LC molecules with the oriented polymer chains and with the unreacted PDA chromophores. LC alignments on the polyester film surfaces have homeotropic to homogeneous characteristics, depending on the length of the n‐alkyl side group, providing strong evidence that the n‐alkyl side groups of the polyesters play a critical role in determining the pretilt angles of the LCs. The LC pretilt angles were also found to be influenced by the thermal annealing history of the irradiated films. In summary, the excellent properties of the PPDA‐CnBZ polymers make them promising candidate materials for use as LC alignment layers in advanced LC display devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1322–1334, 2004     

Large Two‐Photon Absorption of Terpyridine‐Based Quadrupolar Derivatives: Towards their Applications in Optical Limiting and Biological Imaging

Developing organic chromophores with large two‐photon absorption (TPA) in both organic solvents and aqueous media is crucial owing to their applications in solid‐state photonic devices and biological imaging. Herein, a series of novel terpyridine‐based quadrupolar derivatives have been synthesized. The influences of electron‐donating group, type of conjugated bridge, as well as solvent polarity on the molecular TPA properties have been investigated in detail. In contrast to the case in organic solvents, bis(thienyl)‐benzothiadiazole as a rigid conjugated bridge will completely quench molecular two‐photon emission in aqueous media. However, the combination of alkylcarbazole as the donor and bis(styryl)benzene as a conjugation bridge can enlarge molecular TPA cross‐sections in both organic solvent and aqueous media. The reasonable two‐photon emission brightness for the organic nanoparticles of chromophores 3 – 5 in the aqueous media, prepared by the reprecipitation method, enables them to be used as probes for in vivo biological imaging.     

Are we approaching a post‐monolithic era?

Thirty years after their introduction, monolithic stationary phases are an important member of chromatographic phases. When compared to conventional particulate materials, the continuous internal structure of both inorganic silica and organic polymer monoliths allows some hydrodynamic and analytical possibilities that are not provided by conventional particulate stationary phases. Polymer‐based monolithic stationary phases offer simple preparation and straightforward surface modification, which makes them very versatile materials that are applicable, for example, as chromatographic stationary phases, sample enrichment units, enzymatic reactors, and external trigger‐responding materials. On the other hand, current polymer monoliths cannot compete with efficiency provided by superficially porous and sub 2 µm particles. In this highlight article, I take advantage of the 30th anniversary of their introduction to discuss several concerns related to polymer‐based monolithic stationary phases. Particularly, I focus on preparation repeatability, porous properties, swelling of the polymers in organic solvents, column efficiency for small molecules, and heterogeneity of dominant flow‐through pores. In the end, I offer three possible approaches on how to overcome drawbacks related to stationary phases heterogeneity to further increase the applicability of polymer‐based monolithic stationary phases.     

Supramolecular Polymerization of C3‐Symmetric Organogelators: Cooperativity,Solvent, and Gelation Relationship

A systematic study of the influence of solvent and the size of C₃‐symmetric discotics on their supramolecular polymerization mechanism is presented. The cooperativity of the self‐assembly of the reported compounds is directly related to their gelation ability. The two series of C₃‐symmetric discotics investigated herein are based on benzene‐1,3,5‐tricarboxamides (BTAs) and oligo(phenylene ethynylene)‐based tricarboxamides (OPE? TAs) that are peripherally decorated with achiral ( 1 a and 2 a ) or chiral N‐(2‐aminoethyl)‐3,4,5‐trialkoxybenzamide units ( 1 b and 2 b ). The supramolecular polymerization of compounds 1 a , b and 2 a , b has been exhaustively investigated in a number of solvents and by using various techniques: variable‐temperature circular dichroism (VT‐CD) spectroscopy, concentration‐dependent ¹H NMR spectroscopy, and isothermal titration calorimetry (ITC). The supramolecular polymerization mechanism of compounds 2 is highly cooperative in solvents such as methylcyclohexane and toluene and is isodesmic in CHCl₃. Unexpectedly, chiral compound 1 b is practically CD‐silent, in contrast with previously reported BTAs. ITC measurements in CHCl₃ demonstrated that the supramolecular polymerization of BTA 1 a is isodesmic. These results confirm the strong influence of the π‐surface of the central aromatic core of the studied discotic and the branched nature of the peripheral side chains on the supramolecular polymerization. The gelation ability of these organogelators is negated in CHCl₃, in which the supramolecular polymerization mechanism is isodesmic.