Nickel(I) Monomers and Dimers with Cyclopentadienyl and Indenyl Ligands

The reaction of (μ‐Cl)₂Ni₂(NHC)₂ (NHC=1,3‐bis(2,6‐diisopropylphenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ylidene (IPr) or 1,3‐bis(2,6‐diisopropylphenyl)imidazolidin‐2‐ylidene (SIPr)) with either one equivalent of sodium cyclopentadienyl (NaCp) or lithium indenyl (LiInd) results in the formation of diamagnetic NHC supported Ni^I dimers of the form (μ‐Cp)(μ‐Cl)Ni₂(NHC)₂ (NHC=IPr ( 1 a ) or SIPr ( 1 b ); Cp=C₅H₅) or (μ‐Ind)(μ‐Cl)Ni₂(NHC)₂ (NHC=IPr ( 2 a ) or SIPr ( 2 b ); Ind=C₇H₉), which contain bridging Cp and indenyl ligands. The corresponding reaction between two equivalents of NaCp or LiInd and (μ‐Cl)₂Ni₂(NHC)₂ (NHC=IPr or SIPr) generates unusual 17 valence electron Ni^I monomers of the form (η⁵‐Cp)Ni(NHC) (NHC=IPr ( 3 a ) or SIPr ( 3 b )) or (η⁵‐Ind)Ni(NHC) (NHC=IPr ( 4 a ) or SIPr ( 4 b )), which have nonlinear geometries. A combination of DFT calculations and NBO analysis suggests that the Ni^I monomers are more strongly stabilized by the Cp ligand than by the indenyl ligand, which is consistent with experimental results. These calculations also show that the monomers have a lone unpaired‐single‐electron in their valence shell, which is the reason for the nonlinear structures. At room temperature the Cp bridged dimer (μ‐Cp)(μ‐Cl)Ni₂(NHC)₂ undergoes homolytic cleavage of the Ni?Ni bond and is in equilibrium with (η⁵‐Cp)Ni(NHC) and (μ‐Cl)₂Ni₂(NHC)₂. There is no evidence that this equilibrium occurs for (μ‐Ind)(μ‐Cl)Ni₂(NHC)₂. DFT calculations suggest that a thermally accessible triplet state facilitates the homolytic dissociation of the Cp bridged dimers, whereas for bridging indenyl species this excited triplet state is significantly higher in energy. In stoichiometric reactions, the Ni^I monomers (η⁵‐Cp)Ni(NHC) or (η⁵‐Ind)Ni(NHC) undergo both oxidative and reductive processes with mild reagents. Furthermore, they are rare examples of active Ni^I precatalysts for the Suzuki–Miyaura reaction. Complexes 1 a , 2 b , 3 a , 4 a and 4 b have been characterized by X‐ray crystallography.     

Trifluoromethylthiolation of Aryl Iodides and Bromides Enabled by a Bench‐Stable and Easy‐To‐Recover Dinuclear Palladium(I) Catalyst

While palladium catalysis is ubiquitous in modern chemical research, the recovery of the active transition‐metal complex under routine laboratory applications is frequently challenging. Described herein is the concept of alternative cross‐coupling cycles with a more robust (air‐, moisture‐, and thermally‐stable) dinuclear Pd^I complex, thus avoiding the handling of sensitive Pd⁰ species or ligands. Highly efficient C? SCF₃ coupling of a range of aryl iodides and bromides was achieved, and the recovery of the Pd^I complex was accomplished via simple open‐atmosphere column chromatography. Kinetic and computational data support the feasibility of dinuclear Pd^I catalysis. A novel SCF₃‐bridged Pd^I dimer was isolated, characterized by X‐ray crystallography, and verified to be a competent catalytic intermediate.     

NHC/Nickel(II)‐Catalyzed [3+2] Cross‐Dimerization of Unactivated Olefins and Methylenecyclopropanes

Cross‐dimerization of a methylenecyclopropane ( 1 ) and an unactivated alkene ( 2 ) with typical hydroalkenylation reactivity was observed for the first time by using a [NHC‐Ni(allyl)]BAr^F catalyst (NHC=N‐heterocyclic carbene). Results show that the C?C cleavage of 1 did not involve a Ni⁰ oxidative addition, which was crucial in former systems. Thus the method reported here emerges as a complementary method for attaining highly chemo‐ and regioselective synthesis of methylenecyclopentanes ( 3 ) with broad scope. An efficient NHC/Ni^II‐catalyzed rearrangement of 1 leads to the convergent synthesis of 3 in the presence of 2 .     

Aggregation and Degradation of White Phosphorus Mediated by N‐Heterocyclic Carbene Nickel(0) Complexes

The reaction of zerovalent nickel compounds with white phosphorus (P₄) is a barely explored route to binary nickel phosphide clusters. Here, we show that coordinatively and electronically unsaturated N‐heterocyclic carbene (NHC) nickel(0) complexes afford unusual cluster compounds with P₁, P₃, P₅ and P₈ units. Using [Ni(IMes)₂] [IMes=1,3‐bis(2,4,6‐trimethylphenyl)imidazolin‐2‐ylidene], electron‐deficient Ni₃P₄ and Ni₃P₆ clusters have been isolated, which can be described as superhypercloso and hypercloso clusters according to the Wade–Mingos rules. Use of the bulkier NHC complexes [Ni(IPr)₂] or [(IPr)Ni(η⁶‐toluene)] [IPr=1,3‐bis(2,6‐diisopropylphenyl)imidazolin‐2‐ylidene] affords a closo‐Ni₃P₈ cluster. Inverse‐sandwich complexes [(NHC)₂Ni₂P₅] (NHC=IMes, IPr) with an aromatic cyclo‐P₅^? ligand were identified as additional products.     

Synthesis of Mixed Silylene–Carbene Chelate Ligands from N‐Heterocyclic Silylcarbenes Mediated by Nickel

The Ni^II‐mediated tautomerization of the N‐heterocyclic hydrosilylcarbene L²Si(H)(CH₂)NHC 1 , where L²=CH(C?CH₂)(CMe)(NAr)₂, Ar=2,6‐iPr₂C₆H₃; NHC=3,4,5‐trimethylimidazol‐2‐yliden‐6‐yl, leads to the first N‐heterocyclic silylene (NHSi)–carbene (NHC) chelate ligand in the dibromo nickel(II) complex [L¹Si:(CH₂)(NHC)NiBr₂] 2 (L¹=CH(MeC?NAr)₂). Reduction of 2 with KC₈ in the presence of PMe₃ as an auxiliary ligand afforded, depending on the reaction time, the N‐heterocyclic silyl–NHC bromo Ni^II complex [L²Si(CH₂)NHCNiBr(PMe₃)] 3 and the unique Ni⁰ complex [η²(Si‐H){L²Si(H)(CH₂)NHC}Ni(PMe₃)₂] 4 featuring an agostic Si? H→Ni bonding interaction. When 1,2‐bis(dimethylphosphino)ethane (DMPE) was employed as an exogenous ligand, the first NHSi–NHC chelate‐ligand‐stabilized Ni⁰ complex [L¹Si:(CH₂)NHCNi(dmpe)] 5 could be isolated. Moreover, the dicarbonyl Ni⁰ complex 6 , [L¹Si:(CH₂)NHCNi(CO)₂], is easily accessible by the reduction of 2 with K(BHEt₃) under a CO atmosphere. The complexes were spectroscopically and structurally characterized. Furthermore, complex 2 can serve as an efficient precatalyst for Kumada–Corriu‐type cross‐coupling reactions.     

Nickel as a Lewis Base in a T‐Shaped Nickel(0) Germylene Complex Incorporating a Flexible Bis(NHC) Ligand

Flexible, chelating bis(NHC) ligand 2 , able to accommodate both cis‐ and trans‐coordination modes, was used to synthesize ( 2 )Ni(η²‐cod), 3 . In reaction with GeCl₂, it produced ( 2 )NiGeCl₂, 4 , featuring a T‐shaped Ni⁰ and a pyramidal Ge center. Complex 4 could also be prepared from [( 2 )GeCl]Cl, 5 , and Ni(cod)₂, in a reaction that formally involved Ni–Ge transmetalation, followed by coordination of the extruded GeCl₂ moiety to Ni. A computational analysis showed that 4 possesses considerable multiconfigurational character and the Ni→Ge bond is formed through σ‐donation from the Ni 4s, 4p, and 3d orbitals to Ge. (NHC)₂Ni(cod) complexes 9 and 10 , as well as (NHC)₂GeCl₂ derivative 11 , incorporating ligands that cannot accommodate a wide bite angle, failed to produce isolable Ni–Ge complexes. The isolation of ( 2 )Ni(η²‐Py), 12 , provides further evidence for the reluctance of the ( 2 )Ni⁰ fragment to act as a σ‐Lewis acid.     

[(NHC)NiIIH]‐Catalyzed Cross‐Hydroalkenylation of Cyclopropenes with Alkynes: Cyclopentadiene Synthesis by [(NHC)NiII]‐Assisted C−C Rearrangement

A cross‐hydroalkenylation/rearrangement cascade (HARC), using a cyclopropene and alkyne as substrate pairs, was achieved for the first time by using new [(NHC)Ni(allyl)]BAr^F catalysts (NHC=N‐heterocyclic carbenes). By controlling the (NHC)Ni^IIH relative insertion reactivity with cyclopropene and alkyne, a broad scope of cyclopentadienes was obtained with highly selectively. The structural features of the new (NHC)Ni^II catalyst were important for the success of the reaction. The mild reaction conditions employed may serve as an entry for exploring (NHC)Ni^II‐assisted vinylcyclopropane rearrangement reactivity.     

Impact of Oxidation State on Reactivity and Selectivity Differences between Nickel(III) and Nickel(IV) Alkyl Complexes

Described is a systematic comparison of factors impacting the relative rates and selectivities of C(sp³)?C and C(sp³)?O bond‐forming reactions at high‐valent Ni as a function of oxidation state. Two Ni complexes are compared: a cationic octahedral Ni^IV complex ligated by tris(pyrazolyl)borate and a cationic octahedral Ni^III complex ligated by tris(pyrazolyl)methane. Key features of reactivity/selectivity are revealed: 1) C(sp³)?C(sp²) bond‐forming reductive elimination occurs from both centers, but the Ni^III complex reacts up to 300‐fold faster than the Ni^IV, depending on the reaction conditions. The relative reactivity is proposed to derive from ligand dissociation kinetics, which vary as a function of oxidation state and the presence/absence of visible light. 2) Upon the addition of acetate (AcO^?), the Ni^IV complex exclusively undergoes C(sp³)?OAc bond formation, while the Ni^III analogue forms the C(sp³)?C(sp²) coupled product selectively. This difference is rationalized based on the electrophilicity of the respective M?C(sp³) bonds, and thus their relative reactivity towards outer‐sphere S_N2‐type bond‐forming reactions.     

Tritopic NHC Precursors: Unusual Nickel Reactivity and Ethylene Insertion into a C(sp3)–H Bond

The imidazolium chloride [C₃H₃N(C₃H₆NMe₂)N{C(Me)(=NDipp)}]Cl ( 1 ; Dipp=2,6‐diisopropyl phenyl), a potential precursor to a tritopic N^imineC^NHCN^amine pincer‐type ligand, reacted with [Ni(cod)₂] to give the Ni^I‐Ni^I complex 2 , which contains a rare cod‐derived η³‐allyl‐type bridging ligand. The implied intermediate formation of a nickel hydride through oxidative addition of the imidazolium C−H bond did not occur with the symmetrical imidazolium chloride [C₃H₃N₂{C(Me)(=NDipp)}₂]Cl ( 3 ). Instead, a Ni−C(sp³) bond was formed, leading to the neutral N^imineCHN^imine pincer‐type complex Ni[C₃H₃N₂{C(Me)(=NDipp)}₂]Cl ( 4 ). Theoretical studies showed that this highly unusual feature in nickel NHC chemistry is due to steric constraints induced by the N substituents, which prevent Ni−H bond formation. Remarkably, ethylene inserted into the C(sp³)−H bond of 4 without nickel hydride formation, thus suggesting new pathways for the alkylation of non‐activated C−H bonds.     

NHC/Nickel(II)-Catalyzed [3+2] Cross-Dimerization of Unactivated Olefins and Methylenecyclopropanes

Cross-dimerization of a methylenecyclopropane ( 1 ) and an unactivated alkene ( 2 ) with typical hydroalkenylation reactivity was observed for the first time by using a [NHC-Ni(allyl)]BAr^F catalyst (NHC=N-heterocyclic carbene). Results show that the C−C cleavage of 1 did not involve a Ni⁰ oxidative addition, which was crucial in former systems. Thus the method reported here emerges as a complementary method for attaining highly chemo- and regioselective synthesis of methylenecyclopentanes ( 3 ) with broad scope. An efficient NHC/Ni^II-catalyzed rearrangement of 1 leads to the convergent synthesis of 3 in the presence of 2 .     

Expanded‐Ring N‐Heterocyclic Carbenes for the Stabilization of Highly Electrophilic Gold(I) Cations

Strategies for the synthesis of highly electrophilic Au^I complexes from either hydride‐ or chloride‐containing precursors have been investigated by employing sterically encumbered Dipp‐substituted expanded‐ring NHCs (Dipp=2,6‐iPr₂C₆H₃). Thus, complexes of the type (NHC)AuH have been synthesised (for NHC=6‐Dipp or 7‐Dipp) and shown to feature significantly more electron‐rich hydrides than those based on ancillary imidazolylidene donors. This finding is consistent with the stronger σ‐donor character of these NHCs, and allows for protonation of the hydride ligand. Such chemistry leads to the loss of dihydrogen and to the trapping of the [(NHC)Au]⁺ fragment within a dinuclear gold cation containing a bridging hydride. Activation of the hydride ligand in (NHC)AuH by B(C₆F₅)₃, by contrast, generates a species (at low temperatures) featuring a [HB(C₆F₅)₃]^? fragment with spectroscopic signatures similar to the “free” borate anion. Subsequent rearrangement involves B?C bond cleavage and aryl transfer to the carbophilic metal centre. Under halide abstraction conditions utilizing Na[BAr^f₄] (Ar^f=C₆H₃(CF₃)₂‐3,5), systems of the type [(NHC)AuCl] (NHC=6‐Dipp or 7‐Dipp) generate dinuclear complexes [{(NHC)Au}₂(μ‐Cl)]⁺ that are still electrophilic enough at gold to induce aryl abstraction from the [BAr^f₄]^? counterion.     

A T‐Shaped Nickel(I) Metalloradical Species

A T‐shaped Ni^I complex was synthesized using a rigid acridane‐based pincer ligand to prepare a metalloradical center. Structural data displays a nickel ion is embedded in the plane of a PNP ligand. Having a sterically exposed half‐filled orbital, this three‐coordinate Ni^I species reveals unique open‐shell reactivity including the homolytic cleavage of various σ‐bonds, such as H−H, N−N, and C−C.     

[Ni(cod)2][Al(ORF)4], a Source for Naked Nickel(I) Chemistry

The straightforward synthesis of the cationic, purely organometallic Ni^I salt [Ni(cod)₂]⁺[Al(OR^F)₄]⁻ was realized through a reaction between [Ni(cod)₂] and Ag[Al(OR^F)₄] (cod=1,5‐cyclooctadiene). Crystal‐structure analysis and EPR, XANES, and cyclic voltammetry studies confirmed the presence of a homoleptic Ni^I olefin complex. Weak interactions between the metal center, the ligands, and the anion provide a good starting material for further cationic Ni^I complexes.     

A Nickel Complex Containing a Pyramidalized,Ambiphilic Pincer Germylene Ligand

Reaction of N-heterocyclic carbene (NHC)-stabilized PGeP-type germylene Ge{o-(PiPr₂)C₆H₄}₂⋅^MeIiPr ( 1 ) (^MeIiPr=1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene) with Ni(cod)₂ gave pincer germylene complex Ni[Ge{o-(PiPr₂)C₆H₄}₂](^MeIiPr) ( 2 ), in which the Ge center of 2 is significantly pyramidalized. Theoretical calculation on 2 predicted the ambiphilicity of the germanium center, which was confirmed by reactivity studies. Thus, complex 2 reacted with both Lewis base ^MeIMe (^MeIMe=1,3,4,5-tetramethylimidazol-2-ylidene) and Lewis acid BH₃⋅SMe₂ at the germanium center to afford the adducts Ni[Ge{o-(PiPr₂)C₆H₄}₂⋅^MeIMe](^MeIiPr) ( 3 ) and Ni[Ge{o-(PiPr₂)C₆H₄}₂⋅BH₃](^MeIiPr) ( 4 ), respectively. Furthermore, the former was slowly converted to dinuclear complex Ni₂[Ge{o-(PiPr₂)C₆H₄}₂]₂(^MeIMe)₂ ( 5 ) at room temperature. Complex 5 can be regarded as a dimer of the ^MeIMe analog of 2 with a Ni-Ge-Ge-Ni linkage.     

Comparison of dppf‐Supported Nickel Precatalysts for the Suzuki–Miyaura Reaction: The Observation and Activity of Nickel(I)

Ni‐based precatalysts for the Suzuki–Miyaura reaction have potential chemical and economic advantages compared to commonly used Pd systems. Here, we compare Ni precatalysts for the Suzuki–Miyaura reaction supported by the dppf ligand in 3 oxidation states, 0, I and II. Surprisingly, at 80 °C they give similar catalytic activity, with all systems generating significant amounts of Ni^I during the reaction. At room temperature a readily accessible bench‐stable Ni^II precatalyst is highly active and can couple synthetically important heterocyclic substrates. Our work conclusively establishes that Ni^I species are relevant in reactions typically proposed to involve exclusively Ni⁰ and Ni^II complexes.     

Trapping a Silicon(I) Radical with Carbenes: A Cationic cAAC–Silicon(I) Radical and an NHC–Parent‐Silyliumylidene Cation

The trapping of a silicon(I) radical with N‐heterocyclic carbenes is described. The reaction of the cyclic (alkyl)(amino) carbene [cAAC_Me] (cAAC_Me=:C(CMe₂)₂(CH₂)NAr, Ar=2,6‐i Pr₂C₆H₃) with H₂SiI₂ in a 3:1 molar ratio in DME afforded a mixture of the separated ion pair [(cAAC_Me)₂Si:^.]⁺I⁻ ( 1 ), which features a cationic cAAC–silicon(I) radical, and [cAAC_Me−H]⁺I⁻. In addition, the reaction of the NHC–iodosilicon(I) dimer [I_Ar(I)Si:]₂ (I_Ar=:C{N(Ar)CH}₂) with 4 equiv of I_Me (:C{N(Me)CMe}₂), which proceeded through the formation of a silicon(I) radical intermediate, afforded [(I_Me)₂SiH]⁺I⁻ ( 2 ) comprising the first NHC–parent‐silyliumylidene cation. Its further reaction with fluorobenzene afforded the C_Ar−H bond activation product [1‐F‐2‐I_Me‐C₆H₄]⁺I⁻ ( 3 ). The isolation of 2 and 3 confirmed the reaction mechanism for the formation of 1 . Compounds 1 – 3 were analyzed by EPR and NMR spectroscopy, DFT calculations, and X‐ray crystallography.     

Direct Access to Isotopically Labeled Aliphatic Ketones Mediated by Nickel(I) Activation

An extensive range of functionalized aliphatic ketones with good functional‐group tolerance has been prepared by a Ni^I‐promoted coupling of either primary or secondary alkyl iodides with NN₂ pincer Ni^II‐acyl complexes. The latter were easily accessed from the corresponding Ni^II‐alkyl complexes with stoichiometric CO. This Ni‐mediated carbonylative coupling is adaptable to late‐stage carbon isotope labeling, as illustrated by the preparation of isotopically labelled pharmaceuticals. Preliminary investigations suggest the intermediacy of carbon‐centered radicals.     

NHC‐Coordinated Diphosphene‐Stabilized Gold(I) Hydride and Its Reversible Conversion to Gold(I) Formate with CO2

An NHC‐coordinated diphosphene is employed as ligand for the synthesis of a hydrocarbon‐soluble monomeric Au^I hydride, which readily adds CO₂ at room temperature yielding the corresponding Au^I formate. The reversible reaction can be expedited by the addition of NHC, which induces β‐hydride shift and the removal of CO₂ from equilibrium through the formation of an NHC‐CO₂ adduct. The Au^I formate is alternatively formed by dehydrogenative coupling of the Au^I hydride with formic acid (HCO₂H), thus in total establishing a reaction sequence for the Au^I hydride mediated dehydrogenation of HCO₂H as chemical hydrogen storage material.     

Synthesis,Characterization, and Magnetic Behaviour of Dinuclear Nickel(II) Complexes of N,N′‐Substituted Dithiooxamides derived from α‐Amino Acids

New dinuclear complexes of the types [Ni₂(L)(H₂O)₂] and [Ni₂(L)(H₂O)₆] [H₄L = N,N′‐bis(carboxymethyl) dithiooxamide (H₄GLYDTO), N,N′‐bis(1‐carboxyethyl) dithiooxamide (H₄ALADTO), N,N′‐bis(1‐carboxy‐2‐methylpropyl) dithiooxamide (H₄VALDTO) and N,N′‐bis(1‐carboxy‐3‐methylbutyl) dithiooxamide (H₄LEUDTO)] have been prepared and characterized by IR and electronic absorption spectroscopy, and the structure of [Ni₂(ALADTO)(H₂O)₆] crystals has been determined by single crystal X‐ray analysis. This compound is composed of discrete dinuclear units in which two Ni^II atoms with NO₄S kernels are linked by a single [ALADTO]^4– group that coordinates through its carboxylato oxygen, amino nitrogen and thiolato sulphur atoms. In each dimer unit the two nickel(II) ions in distorted octahedral coordination are separated by 5.863(2) Å The temperature dependence of the magnetic susceptibility of the new compounds was measured over the range 2 to 300 K. In the complexes of [GLYDTO]^4– and [ALADTO]^4– the two Ni atoms are antiferromagnetically coupled, with J = –23.51(4) and –20.95(8) cm^–1, respectively. By constrast, [Ni₂(VALDTO)(H₂O)₂], [Ni₂(VALDTO)(H₂O)₆] and [Ni₂(LEUDTO)(H₂O)₂] remain paramagnetic down to 2 K, with magnetic moment values between 2.8 and 3.3 M.B.     

Nickel(II) cluster‐based mixed‐cation coordination polymer synthesized from 2‐mercaptobenzoic acid and its application

High‐nuclearity metal clusters have received considerable attention not only because of their diverse architectures and topologies, but also because of their potential applications as functional materials in many fields. To explore new types of clusters and their potential applications, a new nickel(II) cluster‐based mixed‐cation coordination polymer, namely poly[hexakis[μ₄‐(2‐carboxylatophenyl)sulfanido]di‐μ₃‐chlorido‐tri‐μ₂‐hydroxido‐octanickel(II)sodium(I)], [Ni₈NaCl₂(OH)₃(C₇H₄O₂S)₆]_n, 1 , was synthesized using nickel chloride hexahydrate and mercaptobenzoic acid (H₂mba) as starting reactants under hydrothermal conditions. The material was characterized by single‐crystal X‐ray diffraction (SCXRD), Fourier transform IR spectroscopy, thermogravimetric analysis, powder X‐ray diffraction and X‐ray photoelectron spectroscopy analysis. SCXRD shows that 1 consists of a hexanuclear nickel(II) [Ni₆] cluster, dinuclear Ni^II nodes and a mononuclear Na^I node, resulting in the formation of a complex covalent three‐dimensional network. In addition, a tightly packed NiO/C&S nanocomposite is fabricated by sintering the coordination precursor at 400 °C. The uniform nanocomposite consists of NiO nanoparticles, incompletely carbonized carbon and incompletely vulcanized sulfur. When used as a supercapacitor electrode, the synthesized composite shows an extra‐long cycling stability (>5000 cycles) during the charge/discharge process.