Water soluble poly(ethylene oxide) functionalized norbornene polymers

The synthesis of three different poly(ethylene oxide) macromonomers with a norbornene and oxanorbornene end group is presented. The macromonomers were polymerized to comb‐polymers by ring‐opening metathesis polymerization (ROMP) using Grubbs' Catalyst G3 to produce water soluble polymers with polydispersities between 1.04 and 1.30 and molecular weights between 14,000 and 50,000 g/mol. Characterization by static and dynamic light scattering reveals that the comb‐polymers with norbornene backbone are molecularly disperse in aqueous solution, while the oxanorbornene‐backbone polymers form small water‐soluble aggregates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2640–2648, 2008     

One‐pot synthesis of soluble and fluorescent aliphatic hyperbranched poly(amide‐imide) with solvent‐dependent emission

Aliphatic hyperbranched poly(amide‐imide) was facilely prepared by employing a functional thiolactone‐maleimide monomer. Highly efficient, selective and quantitative properties of amine‐maleimide Michael addition and aminolysis of a thiolactone guaranteed the generation of an ABB' thiol‐yne intermediate without side products, followed by consecutive thiol‐yne click reaction in one‐pot. The hyperbranched structure of the poly(amide‐imide) was confirmed by NMR spectroscopy and triple‐detector GPC/SEC analysis. Additionally, due to the presence of aminosuccinimide fluorophores and intrinsic physical property of hyperbranched polymers, this aliphatic hyperbranched poly(amide‐imide) possessed solvent‐dependent emission and presented good solubility in various organic solvents. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2053–2060     

Water‐soluble polymers from acid‐functionalized norbornenes

Unprotected exo,exo‐5‐norbornene‐2,3‐dicarboxylic acid and exo,exo‐7‐oxa‐5‐norbornene‐2,3‐dicarboxylic acid were polymerized via ring‐opening metathesis polymerization. This reaction yielded polymers with molecular weights (M_n from GPC) ranging from 31 to 242 kg/mol and polydispersity indices between 1.05 and 1.12, using Grubbs' third generation catalyst. The water solubility as a function of pH value of the polymers was investigated by dynamic light scattering (DLS). DLS and acid‐base titration revealed that the oxanorbornene polymer was water soluble over a wider pH range than its norbornene analog. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1266–1273, 2009     

Postfunctionalization of polyoxanorbornene backbone through the combination of bromination and nitroxide radical coupling reactions

The brominated backbone of poly(oxanorbornene imide) (PONB) (PONB‐Br) was functionalized with 2,2,6,6‐tetramethylpiperidine 1‐oxyl (TEMPO)‐acrylate, ‐epoxy, and poly (ethylene glycol) (PEG) yielding PONB‐acrylate, PONB‐epoxy, and PONB‐PEG through the nitroxide radical coupling (NRC) reaction. Although an excess amount of functional‐TEMPOs were used. The observed NRC efficiencies were found in the range of 7–25%. Notably, ¹H NMR spectra of all polymers exhibited a signal at 6.08 ppm after NRC reactions indicating rebuilding of the main chain double bond and further identified by ¹³C NMR analysis. The inevitable formation of double bond through the tendency of the recombination of the formed radicals was supported by a separate experiment conducted without utilizing functional‐TEMPO. Besides, the versatility of the ROMP backbone further demonstrated by the introduction hetero functionality onto the polymer by a consecutive reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2381–2389     

Modular synthesis of polymers containing 2,5‐di(thiophenyl)‐N‐arylpyrrole

A modular and facile route has been developed to synthesize functionalized 2,5‐di(thiophen‐2‐yl)‐1‐H‐arylpyrroles from readily available starting materials. These units are compatible with various polymerization conditions and are versatile building blocks for conjugated polymers. The polymers show high thermal stability and solubility in a number of solvents. Characterization of the polymers reveals a correlation between molecular packing, controllable by polymer design, and charge carrier mobility. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1133–1139     

Three‐arm star ring opening metathesis polymers via alkyne‐azide click reaction

The click chemistry strategy is successfully applied for the preparation of three‐arm star (A₃) ring opening metathesis polymers. A well‐defined monoazide end‐functionalized poly(N‐ethyl oxanorbornene) and a poly(N‐butyl oxanorbornene) obtained via ring opening metathesis polymerization using first generation Grubbs' catalyst are simply clicked with the trisalkyne core affording the synthesis of target star polymers. The obtained star polymers are characterized via nuclear magnetic resonance spectroscopy and gel permeation chromatography (GPC). The deconvolution analyses of GPC traces reveal that the click reaction efficiency for the star formation strongly depends on the chemical nature and the molecular weight of ROM polymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2344–2351, 2009     

Aggregation-induced emission active 3,6-bis(1,2,2-triphenylvinyl)carbazole and bis(4-(1,2,2-triphenylvinyl)phenyl)amine-based poly(acrylates) for explosive detection

Four novel aggregation-induced emission (AIE)-active poly(acrylates), in which AIE-active luminogens 3,6-bis(1,2,2-triphenylvinyl)carbazole (BTPC) and bis(4-(1,2,2-triphenylvinyl)phenyl)amine (BTPPA) were linked to the polymer backbone via a flexible alkyl chain, were synthesized in high yields. Spectrofluorometric analysis of polymer nano-aggregates in tetrahydrofuran/water revealed that PTPPA-based polymers gave more sensitive fluorescence response to nitro-aromatics including 2,4,6-trinitrotoluene than BTPC-based polymers. Paper probes were also fabricated for solid-state detection of explosives. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 672–681     

Modification of RAFT‐polymers via thiol‐ene reactions: A general route to functional polymers and new architectures

An investigation into the aminolysis of ω‐end groups of RAFT‐polymers and simultaneous thiol‐ene reactions with ene‐bearing compounds is described. Three different polymers, P(MMA), P(HPMA), and P(NIPAAm), with low PDIs were synthesized using dithiobenzoate and trithiocarbonate RAFT agents. P(NIPAAm) synthesized with trithiocarbonate RAFT agent and P(HPMA) synthesized with dithiobenzoate RAFT agent were both functionalized with a methacrylate‐modified mannose and a maleimide‐modified biotin via one‐pot simultaneous aminolysis and thiol‐ene reactions with product yields above 85%. The presence of ene‐compounds during aminolysis was shown to prevent the formation of disulfide interchain crosslinking. Using the same approach, P(MMA), P(HPMA), and P(NIPAAm) were converted to (meth)acrylate macromonomers with high yields (>80%). In the case of P(MMA), the simultaneous aminolysis and thiol‐ene addition prevented any intrachain side reactions, i.e., thiolactone formation. New architectures such as graft and block copolymers were successfully generated from the macromonomers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3773–3794, 2009     

Radical polyaddition of difunctional vinyloxirane with thiols for synthesis of linear and networked polysulfides

Radical ring‐opening polyaddition of bifunctional vinyloxirane with multifunctional thiols was investigated. The polyaddition proceeded smoothly via the ring‐opening reaction of the oxirane moiety to afford the corresponding networked polymers bearing vinyl ether and sulfide moieties in the main chain. The thermal properties of the networked polymers and volume changes upon the polyaddition were investigated. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 783–788     

Crosslinked colloids with cyclopropenium cations

Chemical crosslinkers are commonly used to stabilize both natural and synthetic macromolecules, while providing opportunities to install functionality and modulate polymer architecture. Here, we introduce the aromatic cyclopropenium cation as a tri-functional crosslinker of secondary amine-containing polymers. The one-step crosslinking reaction is rapid and requires no subsequent purification. When dispersed in aqueous media, the crosslinked polymers form spherical nanoparticles with highly positive charge that is maintained even in alkaline conditions. This synthetic strategy will enable the incorporation of cyclopropenium into a wide variety of macromolecules. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2641–2645     

End group transformations of RAFT‐generated polymers with bismaleimides: Functional telechelics and modular block copolymers

End group activation of polymers prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization was accomplished by conversion of thiocarbonylthio end groups to thiols and subsequent reaction with excess of a bismaleimide. Poly(N‐isopropylacrylamide) (PNIPAM) was prepared by RAFT, and subsequent aminolysis led to sulfhydryl‐terminated polymers that reacted with an excess of 1,8‐bismaleimidodiethyleneglycol to yield maleimido‐terminated macromolecules. The maleimido end groups allowed near‐quantitative coupling with model low molecular weight thiols or dienes by Michael addition or Diels‐Alder reactions, respectively. Reaction of maleimide‐activated PNIPAM with another thiol‐terminated polymer proved an efficient means of preparing block copolymers by a modular coupling approach. Successful end group functionalization of the well‐defined polymers was confirmed by combination of UV–vis, FTIR, and NMR spectroscopy and gel permeation chromatography. The general strategy proved to be versatile for the preparation of functional telechelics and modular block copolymers from RAFT‐generated (co)polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5093–5100, 2008     

Modification of the microstructure of emulsion polymers

The effect of treating several commercially important emulsion polymers with different initiator systems was investigated. The initiator system producing highly reactive tert‐butoxyl radicals was able to cause polymer modification. This represented an opportunity to extend the range of properties achievable with a given emulsion polymer. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3744–3749, 2003     

Synthesis and characterization of perfluorinated arylenevinylene polymers

Fully fluorinated arylenevinylene polymers have been synthesized via a methodology based on the Stille cross‐coupling reaction and characterized by FTIR spectroscopy and MALDI‐TOF mass spectrometry. Investigation of thin film properties by cyclic voltammetry and ellipsometry shows that complete substitution of hydrogen atoms with fluorine atoms on the conjugated backbone of the poly(arylenevinylene)s results in a strong increase of the band gap. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 285–291, 2010     

Branched polyphosphazenes with controlled dimensions

Using living cationic polymerization, a series of polyphosphazenes is prepared with precisely controlled molecular weights and narrow polydispersities. As well as varying chain length through the use of a living polymerization, amine‐capped polyalkylene oxide (Jeffamine) side chains with varied lengths are grafted to the polymer backbone to give a series of polymers with varied dimensions. Dynamic light scattering and size exclusion chromatography are used to confirm the preparation of polymers with a variety of controlled dimensions and thus hydrodynamic volumes. Furthermore, it is demonstrated how the number of arms per repeat unit, and thus the density of branching, can also be further increased from two to four through using a one‐pot thiolactone conversion of the Jeffamines, followed by thiol‐yne addition to the polyphosphazene backbone. These densely branched, molecular brush‐type polymers on a biodegradable polyphosphazene backbone all show excellent aqueous solubility and have potential in drug‐delivery applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4467–4473     

Synthesis of π‐conjugated oligomer that can form metallo polymers

An oligo(p‐phenylene vinylene) that contains terpyridine ligands has been synthesized. Upon addition of metal ions, a π‐conjugated metallo polymer is formed in which the well‐defined character of oligomers and the material properties of polymers are combined. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4020–4023, 2002     

The synthesis of cyclic polymers by olefin metathesis: Achievements and challenges

Cyclic polymers have drawn considerable interest for their peculiar physical properties in comparison to linear polymers, despite their equivalent compositions. Synthetically, cyclic polymers can be accessed through either macrocyclic ring‐closure or by ring‐expansion polymerization, but the main challenge with either method is the production of highly pure cyclic polymer samples. This highlight describes advances in the area of cyclic polymer synthesis, with a particular focus on ring‐expansion metathesis polymerization. Methods for characterizing cyclic polymers and assessing their purity are also discussed in order to emphasize the need for additional robust and reliable methods for synthesizing and studying topologically complex macromolecules. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 228–242     

Poly(α‐methyleneglutarimide)s from radical polymerization of α‐methyleneglutarimides

α‐Methyleneglutaric acid, a metabolite of niacin (nicotinic acid), can be easily converted to its cyclic anhydride. We report here the first conversion of α‐methyleneglutaric anhydride to (a series of) α‐methyleneglutarimides. These monomers can be radically polymerized to the title polymers. These have relatively high glass transition properties compared to the lower homologs derived from itaconimides (α‐methylenesuccinimides). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1020–1026     

Synthesis of comb‐like polystyrene with poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as macroinitiator

The copolymerization of N‐phenyl maleimide and p‐chloromethyl styrene via reversible addition–fragmentation chain transfer (RAFT) process with AIBN as initiator and 2‐(ethoxycarbonyl)prop‐2‐yl dithiobenzoate as RAFT agent produced copolymers with alternating structure, controlled molecular weights, and narrow molecular weight distributions. Using poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as the macroinitiator for atom transfer radical polymerization of styrene in the presence of CuCl/2,2′‐bipyridine, well‐defined comb‐like polymers with one graft chain for every two monomer units of backbone polymer were obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2069–2075, 2006     

Norbornyl benzocyclobutene ladder polymers: Conformation and microporosity

Shape-persistent contorted ladder polymers are an intriguing and unusual class of polymers. Using catalytic arene-norbornene annulation (CANAL) polymerization and with norbornadiene and dibromoarenes as monomers, we synthesized a series of ladder polymers with fused norbornyl benzocyclobutene backbones and varied conformations. A diaryl spiro-orthocarbonate monomer was used to reorient the ladder backbone perpendicularly to induce three-dimensional kinks, and a p-dibromo-xylene comonomer was used to statistically vary the distance between the spirocyclic kinks in the ladder backbone. Norbornyl benzocyclobutene ladder polymers with no spirocyclic backbone twists possess much more compact conformations than ladder polymers with frequent spirocyclic backbone twists in solution. While spirocyclic twists in the polymer backbone had minor effects on the surface area and microporosity, incorporation of rotatable single bonds in the repeat unit significantly decreased both the surface area and pore volume. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3075–3081     

Long‐chain branched ROMP polymers

This article describes the construction of branched ROMP‐polymer architectures via polycondensation of AB_n‐type macromonomers. For this convergent strategy, a polymer was synthesized that carries several hydroxyl‐groups along the polymer chain and one carboxylic acid group at the chain end. An esterification reaction between these functional groups yielded long‐chain branched polymers. The polymers were analyzed by NMR and SEC to monitor the condensation reaction. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009