Syngas‐Free Highly Regioselective Rhodium‐Catalyzed Transfer Hydroformylation of Alkynes to α,β‐Unsaturated Aldehydes

The hydroformylation of alkynes is a fundamental and important reaction in both academic research and industry. Conventional methods focus on the conversion of alkynes, CO, and H₂ into α,β‐unsaturated aldehydes, but they often suffer from problems associated with operation, regioselectivity, and chemoselectivity. Herein, we disclose an operationally simple, mild, and syngas‐free rhodium‐catalyzed reaction for the hydroformylation of alkynes via formyl and hydride transfer from an alkyl aldehyde. This synthetic method uses inexpensive and easy‐to‐handle n‐butyraldehyde to overcome the challenge posed by the use of syngas in traditional approaches and employs a commercially available catalyst and ligand to transform a broad range of internal alkynes, especially alkynyl‐containing complex molecules, into versatile stereodefined α,β‐unsaturated aldehydes with excellent chemo‐, regio‐, and stereoselectivity.     

Spiroketal‐Based Phosphorus Ligands for Highly Regioselective Hydroformylation of Terminal and Internal Olefins

A new class of bidentate phosphoramidite ligands, based on a spiroketal backbone, has been developed for the rhodium‐catalyzed hydroformylation reactions. A range of short‐ and long‐chain olefins, were found amenable to the protocol, affording high catalytic activity and excellent regioselectivity for the linear aldehydes. Under the optimized reaction conditions, a turnover number (TON) of up to 2.3×10⁴ and linear to branched ratio (l/b) of up to 174.4 were obtained in the Rh^I‐catalyzed hydroformylation of terminal olefins. Remarkably, the catalysts were also found to be efficient in the isomerization–hydroformylation of some internal olefins, to regioselectively afford the linear aldehydes with TON values of up to 2.0×10⁴ and l/b ratios in the range of 23.4–30.6. X‐ray crystallographic analysis revealed the cis coordination of the ligand in the precatalyst [Rh( 3 d )(acac)], whereas NMR and IR studies on the catalytically active hydride complex [HRh(CO)₂( 3 d )] suggested an eq–eq coordination of the ligand in the species.     

1‐Dodecene Hydroformylation Catalyzed by Water Soluble Rhodium Phosphine Complex in Two‐Phase System

1‐Dodecene hydroformylation catalyzed by water soluble rhodium complex [RhCl(CO) (TPPTS)₂] was studied in the presence of TTPTS [P(m‐C₂H₄SO₃Na)₃] and CTAB (cetyltrimethyl ammonium). The influence of reaction parameters was discussed in detail based on micelle effect in biphasic system. The modification for the microcircumstance of micelle interface was conducted by the introduction of a catalyst promoter TPPDS [PhP(m‐C₂H₄SO₃Na)₂] into the reaction solution. A synergistic effect between TPPDS and TPPTS on the regioselectivity of 1‐dodecene hydroformylation was observed. The selectivity of linear aldehyde in the products was so high as 95.7% at the molar ratio of [TPPDS]/[TPPTS] = 0.5.     

Heteropolyacids enhanced the catalytic activity of Rh6(CO)16 in the hydroformylation of alkenes

Active homogeneous catalytic systems based on Rh₆(CO)₁₆‐heteropolyacids for the regioselective hydroformylation of styrene and 1‐octene and their derivatives have been developed. The effects of the amount and the type of the heteropolyacid have been studied and showed a significant improvement of the conversion of styrene and the selectivity towards branched aldehydes. Other rhodium complexes were also considered in the study and the results showed the advantages of the rhodium cluster Rh₆(CO)₁₆ associated with the heteropolyacid H₃PW₁₂O₄₀,25H₂O (HPA‐W₁₂). The effects of temperature, type of solvent and CO/H₂ pressure have also been considered in order to optimize the reaction conditions. Copyright © 2004 John Wiley & Sons, Ltd.     

Calix[4]arene‐based Bis‐phosphonites,Bis‐phosphites,and Bis‐O‐acyl‐phosphites as Ligands in the Rhodium(I)‐catalyzed Hydroformylation of 1‐Octene

New calix[4]arene‐based bis‐phosphonites, bis‐phosphites and bis‐O‐acylphosphites were synthesized and characterized. Treatment of these P‐ligands with selected rhodium and platinum precursors led to mononuclear complexes that were satisfactorily characterized. The solid state structure of the dirhodium(I) complex 14 has been determined by X‐ray diffraction. The two rhodium centres are bridged by two chloro ligands; one rhodium atom is further coordinated by calix[4]arene phosphorus atoms and the other by cyclooctadiene. The new calix[4]arene P‐ligands were tested in the Rh(I) catalyzed hydroformylation of 1‐octene. All Rh(I) complexes catalyzed the reaction leading to high chemoselectivity with regard to the formation of aldehydes. Yields and n/iso‐selectivities depended on the reaction conditions. Average yields of 80 % and n/iso‐ratios of about 1.3 to 1.5 were observed. High yields of aldehydes can be achieved using the methoxy substituted P‐ligands at low Rh:ligand ratios.     

Formation of 18e− and 16e− Acyl(η3‐cyclooctenyl)rhodium(III) Complexes in the Reaction of Cationic (Cycloocta‐1,5‐diene)rhodium(I) Compounds with 2‐(Diphenylphosphino)benzaldehyde

The reaction of cationic diolefinic rhodium(I) complexes with 2‐(diphenylphosphino)benzaldehyde (pCHO) was studied. [Rh(cod)₂]ClO₄ (cod=cycloocta‐1,5‐diene) reacted with pCHO to undergo the oxidative addition of one pCHO with (1,2,3‐η)cyclooct‐2‐en‐1‐yl (η³‐C₈H₁₃) formation, and the coordination of a second pCHO molecule as (phosphino‐κP)aldehyde‐κO(σ‐coordination) chelate to give the 18e⁻ acyl(allyl)rhodium(III) species [Rh(η³‐C₈H₁₃)(pCO)(pCHO)]ClO₄ (see 1 ). Complex 1 reacted with [Rh(cod)(PR₃)₂]ClO₄ (R=aryl) derivatives 3 – 6 to give stable pentacoordinated 16e⁻ acyl[(1,2,3‐η)‐cyclooct‐2‐en‐1‐yl]rhodium(III) species [Rh(η³‐C₈H₁₃)(pCO)(PR₃)]ClO₄ 7 – 10 . The (1,2,3‐η)‐cyclooct‐2‐en‐1‐yl complexes contain cis‐positioned P‐atoms and were fully characterized by NMR, and the molecular structure of 1 was determined by X‐ray crystal diffraction. The rhodium(III) complex 1 catalyzed the hydroformylation of hex‐1‐ene and produced 98% of aldehydes (n/iso=2.6).     

Rhodium‐Catalyzed Hydroformylation of 1,1‐Disubstituted Allenes Employing the Self‐Assembling 6‐DPPon System

A rhodium‐catalyzed hydroformylation of 1,1‐disubstituted allenes is reported. Using a Rh^I/6‐DPPon catalyst system, one can obtain β,γ‐unsaturated aldehydes in high regio‐ and chemoselectivity. The Z‐configured product is formed with up to >95 % selectivity when unsymmetrically 1,1‐disubstituted allenes are submitted to the reaction conditions. This is the first time that these interesting building blocks are accessible by hydroformylation of allenes. The utility of this methodology is demonstrated by further transformations of one of the obtained products.     

Synthesis,characterization and hydroformylation activity of 7‐azaindolate‐bridged dinuclear rhodium(I)phosphines with pendant polar‐groups

New dinuclear Rh(I)–Phosphines of the types [Rh(µ‐azi)(CO)(L)]₂ ( 1,3 – 7 ) and [Rh(µ‐azi)(L)]₂ ( 8 ) with pendant polar groups, and a chealated mononuclear compound [Rh(azi‐H)(CO)(L)] ( 2 ) (where azi = 7‐azaindolate, L = polar phosphine) were isolated from the reaction of [Rh(µ‐Cl)(CO)₂]₂ with 7‐azaindolate followed by some polar mono‐ and bis‐phosphines ( L ₁ – L ₈ ). A relationship between Δδ³¹P‐NMR and ν(CO) values was considered to define the impact of polar‐groups on σ‐donor properties of the phosphines. These compounds were evaluated as catalyst precursors in the hydroformylation of 1‐hexene and 1‐dodecene both in mono‐ and biphasic aqueous organic systems. While the biphasic hydroformylations (water + toluene) gave exclusively the aldehydes, the monophasic one (aqueous ethanol) showed propensity to form both aldehydes and alcohols. The influence of bimetallic cooperative effects, and σ‐donor and hydrophilic properties of the phosphines with pendant polar‐groups in enhancing the yields and selectivity of hydroformylation products was emphasized. In addition, when strong σ‐donor phosphine was used, the π‐acceptor nature of pyridine ring of 7‐azaindolate spacer was found to be a considerable factor in facilitating the facile cleavage of CO group during hydroformylation and in supplementing the cooperative effects. Copyright © 2009 John Wiley & Sons, Ltd.     

Realistic Energy Surfaces for Real‐World Systems: An IMOMO CCSD(T):DFT Scheme for Rhodium‐Catalyzed Hydroformylation with the 6‐DPPon Ligand

The hydroformylation of terminal alkenes is one of the most important homogeneously catalyzed processes in industry, and the atomistic understanding of this reaction has attracted enormous interest in the past. Herein, the whole catalytic cycle for rhodium‐catalyzed hydroformylation with the 6‐diphenylphosphinopyridine‐(2H)‐1‐one (6‐DPPon) ligand 1 was studied. This catalytic transformation is challenging to describe computationally, since two requirements must be met: 1) changes in the hydrogen‐bond network must be modeled accurately and 2) bond‐formation/bond‐breaking processes in the coordination sphere of the rhodium center must be calculated accurately. Depending on the functionals used (BP86, B3LYP), the results were found to differ strongly. Therefore, the complete cycle was calculated by using highly accurate CCSD(T) computations for a PH₃ model ligand. By applying an integrated molecular orbital plus molecular orbital (IMOMO) method consisting of CCSD(T) as high level and DFT as low‐level method, excellent agreement between the two functionals was achieved. To further test the reliability of the calculations, the energetic‐span model was used to compare experimentally derived and computed activation barriers. The accuracy of the new IMOMO method apparently makes it possible to predict the catalytic potential of real‐world systems.     

Clusterkomplexe [M2Rh(μ‐PCy2)(μ‐CO)2(CO)8] mit triangularem Metallgerüst RhM2 (M = Mn,Re; M2 = MnRe): Synthese,Struktur, Ringöffnungen und Katalysatoreigenschaften für die Isomerisierung und Hydroformylierung von 1‐Hexen

Cluster Complexes [M₂Rh(μ‐PCy₂)(μ‐CO)₂(CO)₈] with Triangular Core of RhM₂ (M = Re, Mn; M₂ = MnRe): Synthesis, Structure, Ring Opening Reaction, and Properties as Catalysts for Hydroformylation and Isomerisation of 1‐Hexene The salts PPh₄[M₂(μ‐H)(μ‐PCy₂)(CO)₈] and Rh(COD)[ClO₄] were in equimolar amounts reacted at –40 to –15 °C in the presence of CO_(g) in CH₂Cl₂/methanol solution under release of PPh₄[ClO₄] to intermediates. Such species formed in a selective reaction the unifold unsaturated 46 valence electrons title compounds [M₂Rh(μ‐PCy₂)(μ‐CO)₂(CO)₈] (M = Re 1 , Mn 2 ; M₂ = MnRe 3 ) in yields of > 90%; analogeous the derivatives with the PPh₂ bridge could the obtained (M = Re 4 , Mn 5 ). From these clusters the molecular structure of 2 was determined by a single crystal X‐ray analysis. The exchange of the labil CO ligand attached at the rhodium ring atom in 1 – 3 against selected tertiary and secondary phosphanes in solution gave the substitution products [M₂RhL(μ‐PCy₂)(μ‐CO)₂(CO)₇] (M = Re: L = PMe₃ 6 , P(n‐Bu)₃ 7 , P(n‐C₆H₄SO₃Na)₃ 8 , HPCy₂ 9 , HPPh₂ 10 , HPMen₂ 11 , M₂ = MnRe: L = HPCy₂ 12 ) nearly quantitative. Such dimanganese rhodium intermediates ligated with secondary phosphanes were converted in a subsequent reaction to the ring‐opened complexes [MnRh(μ‐PCy₂)(μ‐H)(CO)₅Mn(μ‐PR₂)(CO)₄] (M = Mn: R = Cy 13 , Ph 14 , Mn 15 ). The molecular structure of 13 , which showed in the time scale of the ³¹P NMR method a fluxional behaviour, was determined by X‐ray structure analysis. All products obtained were always characterized by means of υ(CO)Ir, ¹H and ³¹P NMR measurements. From the reactants of hydroformylation process, CO_(g) 1 – 2 in different solvents afforded at 20 °C under a reversible ring opening reaction the valence‐saturated complexes [MRh(μ‐PCy₂)(CO)₇M(CO)₅] (M = Re 16 , Mn 17 ), whereas the reaction of CO_(g) and the ring‐opened 13 to [MnRh(μ‐PCy₂)(μ‐H)(CO)₆Mn(μ‐PCy₂)(CO)₄] ( 18 ) was as well reversible. The molecular structures of 17 and 18 were determined by X‐ray analysis. The υ(CO)IR, ¹H and ³¹P NMR measurements in pressure‐resistant reaction vessels at 20 °C ascertained the heterolytic splitting of hydrogen in the reaction of 1 – 2 dissolved in CDCl₃ or THF‐d₈ under formation of product monoanions [M₂Rh(μ‐CO)(μ‐H)(μ‐PCy₂)(CO)₉]^– (M = Re, Mn), which also were formed by the reaction of NaBH₄ and 1 – 2 . Finally, the substrate 1‐hexene and 1 and 3 gave under the release of the labil CO ligand an η²‐coordination pattern of hexene, which was weekened going from the Re to the Mn neighbor atoms. After the results of the catalytic experiments with 1 and 2 as catalysts, such change in the bonding property revealed an advantageous formation of hydroformylation products for the dirhenium rhodium catalyst 1 and that of isomerisation products of hexene for the dimanganese rhodium catalyst 2 . Par example, 1 generated n‐heptanal/2‐methylhexanal in TOF values of 246 [h^–1] (n/iso = 3.4) and the c,t‐hexenes in that of 241 [h^–1]. Opposotite to this, 2 achieved such values of 55 [h^–1] (n/iso = 3.6) and 473 [h^–1]. A triphenylphosphane substitution product of 1 increased the activity of the hydroformylation reaction about 20%, accompanied by an only gradually improved selectivity. The hydrogenation products like alcohols and saturated hydrocarbons known from industrial hydroformylation processes were not observed. The metals manganese and rhenium bound at the rhodium reaction center showed a cooperative effect.     

Diastereoselective Synthesis of Hexahydropyrrolo[2,1‐b]oxazoles by a Rhodium‐Catalyzed Hydroformylation / Silica‐Promoted Deformylation Sequence

Fleetingly formyl : A new rhodium‐catalyzed hydroformylation reaction of N‐allyl oxazolidines, carried out under a CO/H₂ atmosphere, followed by a diastereoselective deformylative cyclization affords hexahydropyrrolo[2,1‐b]oxazoles in good yields. The reaction proceeds by a unique hydroformylation–deformylation sequence in which the formyl group virtually substitutes for the {CH₂? O} fragment of the oxazolidine heterocycle.

     

Nanocomposites of Tantalum‐Based Pyrochlore and Indium Hydroxide Showing High and Stable Photocatalytic Activities for Overall Water Splitting and Carbon Dioxide Reduction

Nanocomposites of tantalum‐based pyrochlore nanoparticles and indium hydroxide were prepared by a hydrothermal process for UV‐driven photocatalytic reactions including overall water splitting, hydrogen production from photoreforming of methanol, and CO₂ reduction with water to produce CO. The best catalyst was more than 20 times more active than sodium tantalate in overall water splitting and 3 times more active than Degussa P25 TiO₂ in CO₂ reduction. Moreover, the catalyst was very stable while generating stoichiometric products of H₂ (or CO) and O₂ throughout long‐term photocatalytic reactions. After the removal of In(OH)₃, the pyrochlore nanoparticles remained highly active for H₂ production from pure water and aqueous methanol solution. Both experimental studies and density functional theory calculations suggest that the pyrochlore nanoparticles catalyzed the water reduction to produce H₂, whereas In(OH)₃ was the major active component for water oxidation to produce O₂.     

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single‐Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) to yield synthesis gas (syngas, CO and H₂) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂RR activity and the CO/H₂ ratio. To address this issue, nitrogen‐doped carbon supported single‐atom catalysts are designed as electrocatalysts to produce syngas from CO₂RR. While Co and Ni single‐atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm^?2) with CO/H₂ ratios (0.23–2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single‐atom configurations for the H₂ and CO evolution. The results present a useful case on how non‐precious transition metal species can maintain high CO₂RR activity with tunable CO/H₂ ratios.     

Towards the Development of a Selective Ruthenium‐Catalyzed Hydroformylation of Olefins

The ruthenium‐catalyzed hydroformylation of 1‐ and 2‐octene to give preferentially the corresponding linear aldehyde is reported. The catalyst system comprising of Ru₃(CO)₁₂ and an imidazole‐substituted monophosphine ligand allows for high chemo‐ and regioselectivity. The hydroformylation proceeds with unprecedented rates for a ruthenium‐based catalyst.     

High‐Rate,Tunable Syngas Production with Artificial Photosynthetic Cells

An artificial photosynthetic (APS) system consisting of a photoanodic semiconductor that harvests solar photons to split H₂O, a Ni‐SNG cathodic catalyst for the dark reaction of CO₂ reduction in a CO₂‐saturated NaHCO₃ solution, and a proton‐conducting membrane enabled syngas production from CO₂ and H₂O with solar‐to‐syngas energy‐conversion efficiency of up to 13.6 %. The syngas CO/H₂ ratio was tunable between 1:2 and 5:1. Integration of the APS system with photovoltaic cells led to an impressive overall quantum efficiency of 6.29 % for syngas production. The largest turnover frequency of 529.5 h^?1 was recorded with a photoanodic N‐TiO₂ nanorod array for highly stable CO production. The CO‐evolution rate reached a maximum of 154.9 mmol g^?1 h^?1 in the dark compartment of the APS cell. Scanning electrochemical–atomic force microscopy showed the localization of electrons on the single‐nickel‐atom sites of the Ni‐SNG catalyst, thus confirming that the multielectron reduction of CO₂ to CO was kinetically favored.     

Hydroformylation of Alkenes in a Planetary Ball Mill: From Additive‐Controlled Reactivity to Supramolecular Control of Regioselectivity

The Rh‐catalyzed hydroformylation of aromatic‐substituted alkenes is performed in a planetary ball mill under CO/H₂ pressure. The dispersion of the substrate molecules and the Rh‐catalyst into the grinding jar is ensured by saccharides: methyl‐α‐d ‐glucopyranoside, acyclic dextrins, or cyclodextrins (CDs, cyclic oligosaccharides). The reaction affords the exclusive formation of aldehydes whatever the saccharide. Acyclic saccharides disperse the components within the solid mixture leading to high conversions of alkenes. However, they showed typical selectivity for α‐aldehyde products. If CDs are the dispersing additive, the steric hindrance exerted by the CDs on the primary coordination sphere of the metal modifies the selectivity so that the β‐aldehydes were also formed in non‐negligible proportions. Such through‐space control via hydrophobic effects over reactivity and regioselectivity reveals the potential of such solventless process for catalysis in solid state.     

High‐Rate,Tunable Syngas Production with Artificial Photosynthetic Cells

An artificial photosynthetic (APS) system consisting of a photoanodic semiconductor that harvests solar photons to split H₂O, a Ni‐SNG cathodic catalyst for the dark reaction of CO₂ reduction in a CO₂‐saturated NaHCO₃ solution, and a proton‐conducting membrane enabled syngas production from CO₂ and H₂O with solar‐to‐syngas energy‐conversion efficiency of up to 13.6 %. The syngas CO/H₂ ratio was tunable between 1:2 and 5:1. Integration of the APS system with photovoltaic cells led to an impressive overall quantum efficiency of 6.29 % for syngas production. The largest turnover frequency of 529.5 h^?1 was recorded with a photoanodic N‐TiO₂ nanorod array for highly stable CO production. The CO‐evolution rate reached a maximum of 154.9 mmol g^?1 h^?1 in the dark compartment of the APS cell. Scanning electrochemical–atomic force microscopy showed the localization of electrons on the single‐nickel‐atom sites of the Ni‐SNG catalyst, thus confirming that the multielectron reduction of CO₂ to CO was kinetically favored.     

Synthesis of 4‐Aryl‐8‐fluoro‐3a,4,5,9b‐tetrahydro‐3H‐cyclopenta[c]quinolines and Their Ozonides

4‐Aryl‐8‐fluoro‐3a,4,5,9b‐tetrahydro‐3H‐cyclopenta[c]quinolines are synthesized by acid‐catalyzed (CF₃CO₂H) three‐component cyclocondensation of 4‐fluoroaniline with aromatic aldehydes and cyclopentadiene. Stable ozonides with (1R*,4S*,5aR*,6S*,11bS*)‐configurations are obtained by ozonolysis of corresponding trifluoroacetyl derivatives.     

Synthesis and Reactivity of Organometallic Intermediates Relevant to Cobalt‐Catalyzed Hydroformylation

Intermediates relevant to cobalt‐catalyzed alkene hydroformylation have been isolated and evaluated in fundamental organometallic transformations relevant to aldehyde formation. The 18‐electron (R,R)‐(^iPrDuPhos)Co(CO)₂H has been structurally characterized, and it promotes exclusive hydrogenation of styrene in the presence of 50 bar of H₂/CO gas (1:1) at 100 °C. Deuterium‐labeling studies established reversible 2,1‐insertion of styrene into the Co?D bond of (R,R)‐(^iPrDuPhos)Co(CO)₂D. Whereas rapid β‐hydrogen elimination from cobalt alkyls occurred under an N₂ atmosphere, alkylation of (R,R)‐(^iPrDuPhos)Co(CO)₂Cl in the presence of CO enabled the interception of (R,R)‐(^iPrDuPhos)Co(CO)₂C(O)CH₂CH₂Ph, which upon hydrogenolysis under 4 atm H₂ produced the corresponding aldehyde and cobalt hydride, demonstrating the feasibility of elementary steps in hydroformylation. Both the hydride and chloride derivatives, (X=H^?, Cl^?), underwent exchange with free ¹³CO. Under reduced pressure, (R,R)‐(^iPrDuPhos)Co(CO)₂Cl underwent CO dissociation to form (R,R)‐(^iPrDuPhos)Co(CO)Cl.     

Semiconductor/Covalent‐Organic‐Framework Z‐Scheme Heterojunctions for Artificial Photosynthesis

A strategy to covalently connect crystalline covalent organic frameworks (COFs) with semiconductors to create stable organic–inorganic Z‐scheme heterojunctions for artificial photosynthesis is presented. A series of COF–semiconductor Z‐scheme photocatalysts combining water‐oxidation semiconductors (TiO₂, Bi₂WO₆, and α‐Fe₂O₃) with CO₂ reduction COFs (COF‐316/318) was synthesized and exhibited high photocatalytic CO₂‐to‐CO conversion efficiencies (up to 69.67 μmol g^?1 h^?1), with H₂O as the electron donor in the gas–solid CO₂ reduction, without additional photosensitizers and sacrificial agents. This is the first report of covalently bonded COF/inorganic‐semiconductor systems utilizing the Z‐scheme applied for artificial photosynthesis. Experiments and calculations confirmed efficient semiconductor‐to‐COF electron transfer by covalent coupling, resulting in electron accumulation in the cyano/pyridine moieties of the COF for CO₂ reduction and holes in the semiconductor for H₂O oxidation, thus mimicking natural photosynthesis.