Light‐driven atom transfer radical polymerization on supramolecular complexes of conjugated polymers and single‐walled carbon nanotubes

Previous approaches used to decorate latently reactive conjugated polymer‐coated carbon nanotube complexes have utilized “grafting‐to” strategies. Here, we coat the carbon nanotube surface with a conjugated polymer whose side chains contain the radical initiator, α‐bromoisobutyrate, which enables atom transfer radical polymerization (ATRP) from the polymer–nanotube surface. Using light to generate Cu(I) in situ, ATRP is used to grow narrow dispersity polymer chains from the polymer–nanotube surface. We confirm the successful polymerization of (meth)acrylates from the polymer–nanotube surface using a combination of gel permeation chromatography and infrared spectroscopy. Strikingly, we demonstrate that nanotube optoelectronic properties are preserved after radical‐mediated polymer grafting using Raman spectroscopy and photoluminescence mapping. Overall, this work elucidates a method to grow narrow dispersity polymer chains from the polymer–nanotube surface using light‐driven radical chemistry, with concurrent preservation of nanotube optoelectronic properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2015–2020     

Poly‐p‐phenylenevinylene‐g‐poly(2‐(methacryloyloxy)Ethyl)trimethylammonium chloride (PPV‐g‐PMETAC): A fluorescent,water‐soluble,selective anion sensor

The photophysical and ion‐sensing properties of densely grafted conjugated polymer poly‐p‐phenylenevinylene‐g‐poly(2‐(methacryloyloxy)ethyl)trimethylammonium chloride (PPV‐g‐PMETAC) are presented herein. The grafted polymer exhibits excellent iodide‐sensing which is easily observed using fluorescence spectroscopy. The iodide detection limit for PPV‐g‐PMETAC was found to be 10 nM and was independent of temperature and pH <12. The change in fluorescence of PPV‐g‐PMETAC, upon exposure to iodide, was attributed to polymer aggregation due to changes in the morphology of the grafted PMETAC side chains, which was observed using atomic force microscopic and dynamic light scattering studies. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1997–2003     

“Click” coupling between alkyne‐decorated multiwalled carbon nanotubes and reactive PDMA‐PNIPAM micelles

Covalent functionalization of alkyne‐decorated multiwalled carbon nanotubes (MWNTs) with a well‐defined, azide‐derivatized, thermoresponsive diblock copolymer, poly(N,N‐dimethylacrylamide)‐poly(N‐isopropylacrylamide) (PDMA‐PNIPAM) was accomplished by the Cu(I)‐catalyzed [3 + 2] Huisgen cycloaddition. It was found that this reaction could simultaneously increase the molecular size and bonding density of grafted polymers when PDMA‐PNIPAM micelles were employed in the coupling system. On the other hand, attachment of molecularly dissolved unimers of high‐molecular weight onto the nanotube resulted in low‐graft density. The block copolymer bearing azide groups at the PDMA end was prepared by reversible addition–fragmentation transfer polymerization, which formed micelles with a diameter of ～40 nm at temperatures above its critical micelle temperature. Scanning electron microscopy was utilized to demonstrate that the coupling reaction was successfully carried out between copolymer micelles and alkyne‐bearing MWNTs. FTIR spectroscopy was utilized to follow the introduction and consumption of alkyne groups on the MWNTs. Thermogravimetric analysis indicated that the functionalized MWNTs consisted of about 45% polymer. Transmission electron microscopy was utilized to image polymer‐functionalized MWNTs, showing relatively uniform polymer coatings present on the surface of nanotubes. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7187–7199, 2008     

Efficient fabrication of polymer nanoparticles via sonogashira cross‐linking of linear polymers in dilute solution

The synthesis of single‐chain nanoparticles by palladium‐catalyzed Sonogashira coupling between a terminal alkyne and a di‐halo aryl cross‐linker is reported. Statistical copolymers with trimethylsilyl protected alkyne groups pendent to the linear methacrylate back bones were synthesized using reversible addition‐fragmentation chain transfer polymerization post polymerization de‐protection providing terminal alkyne functionalized linear polymer chains. These linear polymer chains were intramolecularly cross‐linked via bifunctional cross‐linkers. The resulting well‐defined covalently bonded nanoparticles were characterized via triple‐detection size exclusion chromatography where MALS detector provided molecular weight information and viscometric detection characterizes particle size and conformations. The particle size could be readily tuned through polymer molecular weight and by degree of cross‐linking. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 209–217     

Revisiting thiol-yne chemistry: Selective and efficient monoaddition for block and graft copolymer formation

The untapped potential of radical thiol-yne mono-addition chemistry is exploited to overcome the known limitations of thiol-ene chemistry in polymer coupling and block copolymer formation. By careful choice of alkyne, the reaction can selectively lead to the mono-addition product with efficiencies surpassing those achieved by traditional thiol-ene chemistry. This improvement is illustrated by the nearly quantitative synthesis of a variety of diblock and graft copolymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 319–326     

Coupling polymerization of monofunctional allene derivatives with malonates bearing aryl halides moieties via π-allylpalladium complex

A novel polymerization method of allene derivatives with nucleophiles bearing aryl halide moieties (A-B type) is described. By the polymerization of hexylallene with malonates bearing an aryl iodide part, polymers consisting both of internal and exomethylene (exo) double bonds were obtained by mean of the coupling reaction of three different components in high yields. On the other hand, a polymer obtained from phenylallene was selectively composed of internal double bonds (E and Z). By the reaction of hexylallene with a malonate bearing two aryl halide moieties (A-B₂ type), a multibranched polymer was also obtained. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2097–2103, 1997     

Thienoisoindigo‐based small molecules and narrow bandgap polymers synthesized via C–H direct arylation coupling

Thienoisoindigo (TIIG) has emerged as an attractive building block for high‐performance organic optoelectronic devices. Here we report the first synthesis of a series of π‐conjugated TIIG‐based small molecules and alternating copolymers via direct C–H arylation, which enables the efficient synthesis without use of flammable and toxic orgametallic reagents in fewer steps compared Suzuki and Stille coupling. The direct arylation coupling between TIIG and two respective mono‐bromo aryl reactants clearly shows that the α‐H is more reactive than the β‐H in the thiophene unit of TIIG. The high regioselectivity of TIIG monomer warrants the successful synthesis of high‐quality alternating copolymers with minimal structural defects. PTIIG‐BT polymer synthesized via direct arylation polymerization (DAP) showed comparable molecular weight and hole mobility than the same polymer previously synthesized via Suzuki coupling. Moreover, the two new polymers (PTIIG‐TF and PTIIG‐2FBT) synthesized via DAP showed hole mobility up to 10^?3 cm² V^?1 s^?1 in FET devices fabricated and tested under ambient conditions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2015–2031     

Mild incorporation of CO2 into epoxides: Application to nonisocyanate synthesis of poly(hydroxyurethane) containing triazole segment by polyaddition of novel bifunctional five‐membered cyclic carbonate and diamines

The cyclic amidinium iodide effectively catalyzed the ring‐expansion addition of epoxides with carbon dioxide under ordinary pressure and mild conditions to obtain the corresponding five‐membered cyclic carbonates in high yield. The novel triazole‐linked bifunctional five‐membered cyclic carbonate was synthesized successfully by the click reaction of the azide‐ and the alkyne‐substituted five‐membered cyclic carbonates under ambient temperature in high yield. The chemical structure of the novel bis(cyclic carbonate) was characterized by one‐ and two‐dimensional nuclear magnetic resonance spectra. The obtained bis(cyclic carbonate) was converted with commercially available diamines to poly(hydroxyurethane) containing triazole segment without catalyst in high yield. Analyses of the resulting poly(hydroxyurethane)s were performed by proton nuclear magnetic resonance, size exclusion chromatography, thermogravimetric analysis, and differential scanning calorimetry. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 986–993     

Catalyst‐Transfer Suzuki–Miyaura Condensation Polymerization of Stilbene Monomer: Different Polymerization Behavior Depending on Halide and Aryl Group of ArPd(tBu3P)X Initiator

We report Suzuki–Miyaura coupling polymerization of tetraalkoxy‐substituted 4‐bromostilbene‐4′‐boronic acid 1 with several t‐Bu₃P‐ligated Pd initiators; this is the first example of catalyst‐transfer condensation polymerization (CTCP) of a monomer containing a carbon–carbon double bond. When o‐tolylPd(^tBu₃P)Br was used as the initiator, the o‐tolyl group was not introduced at the polymer end, but polymer with boronic acid at one end and bromine at the other was obtained. However, when we employed stilbenePd(^tBu₃P)I generated in situ from iodostilbene and Pd(^tBu₃P)G2 precatalyst, or isolated ArPd(^tBu₃P)X (Ar, X = Ph, I; o‐tolyl, I; and Ph, Br), the aryl group was introduced at the polymer end, indicating that CTCP of 1 proceeded. Therefore, the iodide and aryl group of the Pd initiator complex is crucial for CTCP of 1 . However, the molecular weight distribution of the obtained polymer was broad, possibly because coordination of the carbon–carbon double bond of 1 to ArPd(^tBu₃P)I resulted in slow initiation. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 297–304     

Random fluorene copolymers with on‐chain quinoxaline acceptor units

Two series of novel random polyfluorene copolymers containing quinoxaline units were prepared by stressing the coupling according to Yamamoto. The first series contains 2,3‐bis‐(4′‐tert‐butyl‐biphenyl‐4‐yl)benzo[g]quinoxaline and the second series 2,3‐bis‐(4′‐tert‐butyl‐biphenyl‐4‐yl)quinoxaline as energy accepting unit. The copolymers were identified by gel permeation chromatography, infrared spectroscopy, and nuclear magnetic resonance spectroscopy. Thermal properties were analyzed by thermal gravimetric analysis and differential scanning calorimetry revealing amorphous copolymers that are stable up to 430 °C. The morphology was investigated using atomic force microscopy. The optical properties in solutions and thin films were analyzed. Furthermore, the thin film electro‐optical properties were determined in monolayer polymer light‐emitting devices. Single layer devices were built with efficiencies ranging from 0.15 to 2.0 cd/A. For the random copolymers with 5 mol % benzo[g]quinoxazoline in the polyfluorene backbone some threefold efficiency enhancement from 1.1 to 3.0 cd/A was achieved by utilizing an ultra thin interlayer of poly(9,9‐di‐n‐octylfluorene‐2,7‐diyl)‐alt‐[1,4‐phenylene‐(4‐sec‐butylphenylimino)‐1,4‐phenylene] between PEDOT:PSS and the emissive random copolymer layer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4773–4785, 2007     

Facilitating polymer conjugation via combination of RAFT polymerization and activated ester chemistry

The synthesis of block copolymers via polymer conjugation of well‐defined building blocks offers excellent control over the structures obtained, but often several coupling strategies need to be explored to find an efficient one depending on the building blocks. To facilitate the synthesis of polymers with adjustable functional end‐groups for polymer conjugation, we report on the combination of activated ester chemistry with RAFT polymerization using a chain transfer agent (CTA) with a pentafluorophenyl ester (PFP‐CTA), which allows for flexible functionalization of either the CTA prior to polymerization or the obtained polymer after polymerization. Different polymethacrylates, namely PMMA, P(t‐BuMA) and PDEGMEMA, were synthesized with an alkyne‐CTA obtained from the aminolysis of the PFP‐CTA with propargylamine, and the successful incorporation of the alkyne moiety could be shown via ¹H and ¹³C NMR spectroscopy and MALDI TOF MS. Further, the reactive α‐end‐groups of polymers synthesized using the unmodified PFP‐CTA could be converted into azide and alkyne end‐groups after polymerization, and the high functionalization efficiencies could be demonstrated via successful coupling of the resulting polymers via CuAAC. Thus, the PFP‐CTA allows for high combinatory flexibility in polymer synthesis facilitating polymer conjugation as useful method for the synthesis of block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Polymer-supported palladium (II) containing N2O2: An efficient and robust heterogeneous catalyst for C–C coupling reactions

A new polymer was prepared from 1,3,5-triformylphloroglucinol (noted as TDTB) and o-phenylenediamine through Schiff base condensation reaction, and palladium (II) was immobilized on the polymer (noted as TbPo-Pd(II)). This process was easy to work-up and cost-effective. The structure and composition of TbPo-Pd(II) were fully characterized by FTIR, TGA, XPS, AAS, SEM, and TEM analyses. Meanwhile, this catalyst showed desired thermal stability and excellent performance in water/methanol system for Suzuki and Sonogashira coupling reactions. In addition, this heterogeneous catalyst can be readily recovered by simple filtration with no appreciable Pd leaching in the reaction. This work provides a powerful protocol for rapid access to asymmetrical biphenyls and aryl alkynes. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2344–2353     

Effect of surface‐grafted ionic groups on the performance of cellulose‐fiber‐reinforced thermoplastic composites

The influence of the surface chemistry of the cellulose fiber and polymer matrix on the mechanical and thermal dynamic mechanical properties of cellulose‐fiber‐reinforced polymer composites was investigated. The cellulose fiber was treated either with a coupling agent or with a coupling‐agent treatment followed by the introduction of quaternary ammonium groups onto the fiber surface, whereas the polymer matrix, with opposite polar groups such as polystyrene incorporated with sulfonated polystyrene and poly(ethylene‐co‐methacrylic acid), was compounded with the fiber. The grafting of the fiber surface was investigated with Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy. Experimental results showed that an obvious improvement in the mechanical strength could be achieved for composites with an ionic interface between the fiber and the polymer matrix because of the adhesion enhancement of the fiber and the matrix. The improved adhesion could be ascribed to the grafted ionic groups at the cellulose‐fiber surface. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2022–2032, 2003     

Synthesis,characterization, and optoelectronic properties of hyperbranched polyfluorenes containing pendant benzylether dendrons

Linear polyfluorenes with low generation of side benzylether dendrons ( PLG0 , PLG1 ) and hyperbranched polyfluorenes with 1,3,5‐benzene branch unit ( PHG0 and PHG1 ) were prepared by the Suzuki coupling reaction to investigate the structural effect on optoelectronic properties. Their optical properties, both in solution and film state, were investigated using absorption and photoluminescence (PL) spectra. The excimer emission of polyfluorene at about 530 nm, induced by thermal annealing, was completely suppressed by the hyperbranched structure, but the suppression was not obvious by the side benzylether dendrons. The optoelectronic performance of the EL devices (ITO/PEDOT:PSS/polymer/Ca/Al) was strongly dependent upon chemical structures of the emitting polyfluorenes. The hyperbranched PHG0 with zero generation of benzylether side groups revealed the best device performance, with maximal luminance and maximal luminance efficiency of 2350 cd/m² and 0.33 cd/A, respectively. The results suggest that incorporation of branch units with low generation of benzylether dendrons is an effective way to improve annealing stability and EL performance of the polyfluorenes. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5945–5958, 2008     

Highly efficient recyclable heterogeneous palladium catalyst for C-C coupling, amination and cyanation reactions

An inexpensive, air-moisture stable and reusable PS-Pd(II)-anthra complex was synthesized by reacting chloro-methylated polystyrene with anthranilic acid to get polymer anchored ligand which was then reacted with PdCl₂ to get polymer anchored complex. This complex was characterized by different spectroscopic and elemental analyses. The activity of the Pd-complex as catalyst was tested for the Suzuki, Heck, Sonogashira cross-coupling and also for amination and cyanation reactions under various conditions. The catalyst exhibits high catalytic activities for the coupling of various aryl halides with organoboronic acid, alkene, alkyne and amine along with the cyanation of aryl halides providing excellent yields of desired product. Further, the catalyst can be easily recovered quantitatively by simple filtration and reused up to five times without sufficient loss of its catalytic activity.     

Highly efficient and stable blue‐light‐emitting binaphthol‐fluorene copolymers: A joint experimental and theoretical study of the main‐chain chirality

In a quest for the main‐chain chiral and highly stable blue‐light‐emitting π‐conjugated polymers, a novel series of soluble conjugated random and alternating copolymers (PF‐BN) derived from fluorene and axially chiral 1,1′‐binaphthol (BINOL) were successfully synthesized by Suzuki coupling polymerization. The polymer structures, optical properties, and their electrochemical properties were investigated by ¹H NMR, TGA/DSC, UV‐Vis absorption, photoluminescence, cyclic voltammetry, circular dichroism spectroscopy, and DFT calculations. The blue‐light‐emitting BINOL‐containing copolymers with proper content of BINOL show highly efficient photoluminescence and ultra highly stable light‐emission with almost unchanged fluorescent spectra after annealing at 200 °C in air for 10 h. The joint experimental and theoretical study of the main‐chain chirality reveals that (1) the chirality of BINOL can be transferred to the polymer backbone, (2) the effective conjugation length is about one BINOL and three fluorenes, (3) the main active chiral block in the copolymers is probably composed by one BINOL with the other two or three fluorenes, and (4) the dihedral angle in the PF‐BN copolymers should be larger than 105°. The incorporation of BINOL into the polyfluorene backbone is an effective way to produce highly efficient and stable blue‐light‐emitting main‐chain chiral conjugated polymer with interesting optoelectronic properties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3868–3879, 2010     

How good is CuAAC “click” chemistry for polymer coupling reactions?

¹H NMR and SEC analyses are used to investigate the overall efficiency of Copper Catalyzed Azide Alkyne Cycloaddition (CuAAC) “click” coupling reactions between alkyne‐ and azide‐terminated polymers using polystyrene as a model. Quantitative convolution modeling of the entire molecular weight distribution is applied to characterize the outcomes of the functional polymer synthesis reactions (i.e., by atom transfer radical polymerization), as well as the CuAAC coupling reaction. Incomplete functionality of the azide‐terminated polystyrene (∼92%) proves to be the largest factor compromising the efficacy of the CuAAC coupling reaction and is attributed primarily to the loss of terminal bromide functionality during its synthesis. The efficiency of the S_N2 reaction converting bromide to azide was found to be about 99%. After taking into account the influence of non‐functional polymer, we find that, under the reaction conditions used, the efficiency of the CuAAC coupling reaction determined from both techniques is about 94%. These inefficiencies compromise the fidelity and potential utility of CuAAC coupling reactions for the synthesis of hierarchically structured polymers. While CuAAC efficiency is expected to depend on the specific reaction conditions used, the framework described for determining reaction efficiency does provide a means for ultimately optimizing the reaction conditions for CuAAC coupling reactions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 75–84     

Investigation of Suzuki–Miyaura catalyst‐transfer polycondensation of AB‐type fluorene monomer using coordination‐saturated aryl Pd(II) halide complexes as initiators

Novel triarylamine‐based coordination‐saturated aryl Pd(II) halide complexes ligated by PEt₃, PCy₃, and P(o‐tol)₃ were successfully synthesized by direct oxidative addition of aryl halide to the corresponding Pd(0) precursors. Suzuki–Miyaura coupling polymerization of 2‐(7‐halide‐9,9‐dioctylfluoren‐2‐yl)?1,3,2‐dioxaborinane with these Pd(II) complexes as initiators was investigated for the synthesis of poly(fluorene)s with triarylamine end group. Pd(II) complexes with PCy₃ or P(o‐tol)₃ exhibited catalytic activity and realized the catalyst‐transfer polycondensation at 75 °C and room temperature, respectively, while the polymerization using Pd(II) catalyst ligated by PEt₃ did not proceed, which indicated that the bulky phosphine ligands could facilitate the reductive elimination and further promote the polymerization. In addition, the dimeric Pd(II) complex with P(o‐tol)₃ can convert into monomeric Pd(II) intermediate with an open coordination site, which had a higher activity. The end groups of the afforded polyfluorene were analyzed by matrix‐assisted laser desorption ionization time‐of‐flight (MALDI‐TOF) mass spectrometry, in which the Ar/H end groups are indicative of the catalyst‐transfer polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1457–1463     

Catalytic and antibacterial properties of 3-dentate carboxamide Pd/Pt complexes obtained via a benign route

The complexes Pd^II(qcq)(OAc) and Pt^II(qcq)Cl have been synthesized using environmentally benign synthesized ligands and characterized by elemental analyses: Fourier transform infrared spectroscopy, UV–visible spectroscopy, ¹H NMR spectroscopy, and X-ray diffraction. The catalytic activity of the complex was assessed, in different media, for the Mizoroki–Heck coupling reaction for typical aryl halides and terminal olefins under aerobic conditions. Since the base and the solvent were found to influence the efficiency of the reaction, reaction conditions, temperature, time, and the amount of K₃PO₄ and a mixture of H₂O/PEG, were optimized. We found, for the Mizoroki–Heck reaction coupling less reactive aryl chloride derivatives with olefins, promising activity for palladium catalysts. The electrochemical behavior of Hqcq and the Pd(II) complex was investigated by cyclic voltammetry and irreversible Pd^II/I reductions were observed. Hqcq and the Pd(II) and Pt(II) complexes were also screened for their in vitro antibacterial activity. They showed promising antibacterial activity comparable to that of the antibiotic penicillin.     

Efficient Cu(I) acetate‐catalyzed cycloaddition of multifunctional alkynes and azides: From solution to bulk polymerization

“Click” chemistry is an effective and commonly used technique in polymer chemistry for the synthesis and modification of polymers. In this study, the bulk polymerization of multifunctional alkynes and azides was achieved by the copper(I)‐catalyzed alkyne–azide 1,3‐dipolar cycloaddition. The influence of different catalyst systems on the polymerization kinetics of the “click”reaction were evaluated by differential scanning calorimetry. Surprisingly, Cu(I) acetate showed the most efficient catalytic behavior among the applied Cu(I) salts. The polymerization kinetics in solution were investigated by 1H NMR spectroscopy and size exclusion chromatography. According to the 1H NMR investigation the copper(I)‐catalyzed cycloaddition follows a second‐order kinetics with external catalysis. Additionally, the mechanical properties of the resulting polymers were investigated by depth sensing indentation. Thereby the polymerizations of the alkyne tripropargylamine with the azides 1,3‐bis(azidomethyl)benzene and 1,4‐bis(azidomethyl)benzene resulted in mechanical hard materials. Furthermore, the combination of the alkynes tripropargylamine and di(prop‐2‐yn‐1‐yl) isophorone dicarbamate and polymerization with 1,2‐bis(2‐azidoethoxy)ethane resulted in high indentation moduli. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 239–247