Melt‐flow‐induced phase morphologies of a high‐density polyethylene/poly(ethylene‐co‐1‐octene) blend

A blend of high‐density polyethylene and an elastomeric poly(ethylene‐co‐1‐octene) resin, containing 25 mol % octene and long‐chain branching, was phase‐separated in the melt under quiescent conditions. After melt flow, the blend had fine globular or interconnected phase morphologies that were interpreted as originating from the various stages of coarsening after liquid–liquid phase separation through spinodal decomposition. It was inferred that the miscibility of the blend was enhanced under melt flow. After cessation of flow, concurrent liquid–liquid and solid–liquid phase separation took place, resulting in the formation of an interpenetrating morphology comprising amorphous polyethylene, copolymer, and crystalline polyethylene. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 380–389, 2001     

On‐line ionic liquid‐based dynamic microwave‐assisted extraction‐high performance liquid chromatography for the determination of lipophilic constituents in root of Salvia miltiorrhiza Bunge

On‐line continuous sampling, ionic liquid‐based dynamic microwave‐assisted extraction high performance liquid chromatography has been developed and applied to the extraction of lipophilic constituents from root of Salvia miltiorrhiza Bunge. Several operating parameters were optimized by single‐factor and Box–Behnken design experiments. The type and concentration of ionic liquids, power of microwave irradiation, flow rate of sample suspension, amount, and particle size of sample were investigated. The limits of detection for tanshin‐one I, cryptotanshinone, and tanshinone II_A are 0.014, 0.009, and 0.009 mg/g, respectively. The RSDs of interday and intraday were lower than 2.02 and 2.16%, respectively. The recoveries for target analytes were in the range of 90.7–101.8%. The homogeneity of the suspension and stability of the analytes were investigated and the results were satisfactory. The proposed method was compared with the off‐line ionic liquid‐based dynamic microwave‐assisted extraction, off‐line ethanol‐based dynamic microwave‐assisted extraction, ionic liquid‐based ultrasonic‐assisted extraction, and ionic liquid‐based maceration extraction. The results indicated that the proposed method is effective for the extraction of the active components in Chinese herbal medicine and has some advantages over the other methods.     

A smartphone‐based on‐site nucleic acid testing platform at point‐of‐care settings

We developed a smartphone‐based on‐site nucleic acid testing (NAT) platform that can image and analyze lateral flow nucleic acid assays at point‐of‐care settings. An inexpensive add‐on was devised to run lateral flow assays while providing homogeneous ambient light for imaging. In addition, an Android app with a user‐friendly interface was developed for the result analysis and management. Linear color calibration is implemented inside the app to minimize the colorimetric reaction difference between smartphones. A relationship function between nucleic acid concentration and colorimetric reaction was established and evaluated by leave‐one‐out cross validation. The predicted concentration and true concentration showed a good agreement with an R‐squared value of 0.96. This smartphone‐based NAT platform can be used to diagnose infectious diseases and monitor disease progression, and assess treatment efficacy, especially for resource‐limited settings.     

Determination of δ‐[L‐α‐aminoadipyl]‐L‐cysteinyl‐D‐valine in cell extracts of Penicillium chrysogenum using ion pair‐RP‐UPLC‐MS/MS

δ‐[L ‐α‐Aminoadipyl]‐L ‐cysteinyl‐D ‐valine (ACV) is a key intermediate in the biosynthesis pathway of penicillins and cephalosporins. Therefore, the accurate quantification of ACV is relevant, e.g. for kinetic studies on the production of these β‐lactam antibiotics. However, accurate quantification of ACV is a challenge, because it is an active thiol compound which, upon exposure to air, can easily react with other thiol compounds to form oxidized disulfides. We have found that, during exposure to air, the oxidation of ACV occurs both in aqueous standard solutions as well as in biological samples. Qualitative and quantitative determinations of ACV and the oxidized dimer bis‐δ‐[L ‐α‐aminoadipyl]‐L ‐cysteinyl‐D ‐valine have been carried out using ion pair reversed‐phase ultra high‐performance liquid chromatography, hyphenated with tandem mass spectrometry (IP‐RP‐UPLC‐MS/MS) as the analytical platform. We show that by application of tris(2‐carboxy‐ethyl)phosphine hydrochloride (TCEP) as the reducing reagent, the total amount of ACV can be determined, while using maleimide as derivatizing reagent enables to quantify the free reduced form only.     

Optimizing separations in online comprehensive two‐dimensional liquid chromatography

Online comprehensive two‐dimensional liquid chromatography has become an attractive option for the analysis of complex nonvolatile samples found in various fields (e.g. environmental studies, food, life, and polymer sciences). Two‐dimensional liquid chromatography complements the highly popular hyphenated systems that combine liquid chromatography with mass spectrometry. Two‐dimensional liquid chromatography is also applied to the analysis of samples that are not compatible with mass spectrometry (e.g. high‐molecular‐weight polymers), providing important information on the distribution of the sample components along chemical dimensions (molecular weight, charge, lipophilicity, stereochemistry, etc.). Also, in comparison with conventional one‐dimensional liquid chromatography, two‐dimensional liquid chromatography provides a greater separation power (peak capacity). Because of the additional selectivity and higher peak capacity, the combination of two‐dimensional liquid chromatography with mass spectrometry allows for simpler mixtures of compounds to be introduced in the ion source at any given time, improving quantitative analysis by reducing matrix effects. In this review, we summarize the rationale and principles of two‐dimensional liquid chromatography experiments, describe advantages and disadvantages of combining different selectivities and discuss strategies to improve the quality of two‐dimensional liquid chromatography separations.     

Magnetic digital microfluidics on a bioinspired surface for point‐of‐care diagnostics of infectious disease

Magnetic digital microfluidics uses magnetic force to manipulate droplets on a Teflon‐coated substrate through the added magnetic particles. To achieve a wide range of droplet manipulation, hydrophilic patterns, known as surface energy traps, are introduced onto the Teflon‐coated hydrophobic substrate. However, the Teflon‐coated substrate is difficult to modify because it is nonwettable, and existing techniques for patterning surface energy traps have many limitations. Inspired by the mussel adhesion mechanism, we use polydopamine, a bioinspired substance that adheres strongly to almost any materials, to pattern surface energy traps on the Teflon‐coated substrate with a great ease. We have optimized the polydopamine coating protocol and characterized the surface properties of the polydopamine surface energy traps. Droplet operations including particle extraction, liquid dispensing, liquid shaping, and cross‐platform transfer have been demonstrated on the polydopamine surface energy trap‐enabled magnetic digital microfluidic platform in both single‐plate and two‐plate configurations. Furthermore, the detection of hepatitis B surface antigen using ELISA has been demonstrated on the new magnetic dgitial microfluidic platform. This new bioinspired magnetic digital microfluidic platform is easy to fabricate and operate, showing a great potential for point‐of‐care applications.     

Ultrapreconcentration and determination of organophosphorus pesticides in water by solid‐phase extraction combined with dispersive liquid–liquid microextraction and high‐performance liquid chromatography

Solid‐phase extraction coupled with dispersive liquid–liquid microextraction was developed as an ultra‐preconcentration method for the determination of four organophosphorus pesticides (isocarbophos, parathion‐methyl, triazophos and fenitrothion) in water samples. The analytes considered in this study were rapidly extracted and concentrated from large volumes of aqueous solutions (100 mL) by solid‐phase extraction coupled with dispersive liquid–liquid microextraction and then analyzed using high performance liquid chromatography. Experimental variables including type and volume of elution solvent, volume and flow rate of sample solution, salt concentration, type and volume of extraction solvent and sample solution pH were investigated for the solid‐phase extraction coupled with dispersive liquid–liquid microextraction with these analytes, and the best results were obtained using methanol as eluent and ethylene chloride as extraction solvent. Under the optimal conditions, an exhaustive extraction for four analytes (recoveries >86.9%) and high enrichment factors were attained. The limits of detection were between 0.021 and 0.15 μg/L. The relative standard deviations for 0.5 μg/L of the pesticides in water were in the range of 1.9–6.8% (n = 5). The proposed strategy offered the advantages of simple operation, high enrichment factor and sensitivity and was successfully applied to the determination of four organophosphorus pesticides in water samples.     

The Synthesis of 2,11‐Diamino‐4,9‐diphenyl‐4,9‐dihydrobenzo [f] pyrano[3,2‐h]chromene‐3,10‐dicarbonitrile Derivatives using Triethanolammonium Acetate as a Green Ionic Liquid

Triethanolammonium acetate [TEA ][HOAc ] was used as a green ionic liquid and successfully utilized for the multi‐component synthesis of 2,11‐diamino‐4,9‐diphenyl‐4,9‐dihydrobenzo[f]pyrano[3,2‐h]chromene‐3,10‐dicarbonitrile derivatives as new compounds by the reaction of 2,3‐naphthalenediol with malononitrile and various aldehydes. Mild reaction conditions and high yields are some of the advantages of this method. These compounds were identified by IR , NMR spectroscopy and mass analysis.     

Rapid Generation and Safe Use of Carbenes Enabled by a Novel Flow Protocol with In‐line IR spectroscopy

A powerful new continuous process for the formation and use of donor/acceptor‐substituted carbenes is described. The safety profile of diazo group transfer on methyl phenylacetate was determined including kinetic studies in batch and in flow using in‐line IR analysis. Batch work‐up and liquid chromatography were circumvented by developing an optimized liquid/liquid flow separation method providing aryl diazoacetates in high purity. Fast screening of reaction conditions in flow with in‐line IR analysis allowed rapid reaction optimization. Finally, a multistep process of diazo group transfer, extraction, separation and subsequent diazo decomposition combined with multiple X?H insertion reactions was established.     

In Operando Visualization of the Electrochemical Formation of Liquid Polybromide Microdroplets

Zinc–bromine flow batteries are promising for stationary energy storage, and bromine‐complexing agents have been used to form phase‐separated liquid polybromide products. However, an understanding of the dynamics of polybromide nucleation is limited due to the beam sensitivity and complexity of polybromides. Here we report an in operando platform composed of dark‐field light microscopy and a transparent electrochemical cell to reveal the dynamics of polybromide formation in their native environment. Using our platform, we confirm and reveal the liquid nature, chemical composition, pinning effect (strong interaction with Pt), residual effect (residual charge products on the surface), self‐discharging, and over‐oxidation of the polybromide products. The results provide insights into the role of complexing agents and guide the future design of zinc–bromine flow batteries. Furthermore, our in operando platform can potentially be used to study sensitive species and phases in other electrochemical reactions.     

Liquid‐Phase RNA Synthesis by Using Alkyl‐Chain‐Soluble Support

Recent progress in the RNA therapeutics has increased demand for the synthesis of large quantities of oligoribonucleotides. The assembly of RNA oligomers relies mainly on solid‐phase approaches. These allow rapid product purification and the ability to drive a target reaction to completion through the use of excess reagents. Despite the known advantages of solid‐phase synthesis, some issues in the process remain to be addressed, such as low and limited scale, reagent accessibility, and the use of a very large excess of reagents. Herein, we report a highly efficient and practical method of liquid‐phase synthesis of RNA oligomers by using alkyl‐chain‐soluble support. We demonstrate the utility of the liquid‐phase method through 21‐mer RNA synthesis on a gram scale.     

Automated Generation and Reactions of 3‐Hydroxymethylindoles in Continuous‐Flow Microreactors

An automated sequential approach for the generation and reactions of 3‐hydroxymethylindoles in continuous‐flow microreactors is described. Consecutive halogen–magnesium exchanges of four 3‐iodoindoles followed by addition to three aldehydes provided twelve 3‐hydroxymethylindoles in a multi‐microreactor setup. The synthetic flow strategy could be coupled with an in line continuous liquid–liquid extraction workup protocol for each reaction. Further elaboration of each of these indoles within the fluidic setup was achieved by acid‐catalysed nucleophilic substitutions with allyltrimethylsilane and methanol used as nucleophiles. Overall, a set of four 3‐iodoindoles was converted into thirty‐six indole derivatives by a range of transformations including iodo–magnesium exchange/electrophile trapping and acid‐catalysed nucleophilic substitution in a fully automated sequential fashion.     

Matrix solid‐phase dispersion with chitosan‐zinc oxide nanoparticles combined with flotation‐assisted dispersive liquid–liquid microextraction for the determination of 13 n‐alkanes in soil samples

In this study, chitosan‐zinc oxide nanoparticles were used as a sorbent of miniaturized matrix solid‐phase dispersion combined with flotation‐assisted dispersive liquid–liquid microextraction for the simultaneous determination of 13 n‐alkanes such as C₈H₁₈ and C₂₀H₄₂ in soil samples. The solid samples were directly blended with the chitosan nanoparticles in the solid‐phase dispersion method. The eluent of solid‐phase dispersion was applied as the dispersive solvent for the following flotation‐assisted dispersive liquid–liquid microextraction for further purification and enrichment of the target compounds prior to gas chromatography with flame ionization detection. Under the optimum conditions, good linearity with correlation coefficients in the range 0.9991 < r² < 0.9995 and low detection limits between 0.08 to 2.5 ng/g were achieved. The presented procedure combined the advantages of chitosan‐zinc oxide nanoparticles, solid‐phase dispersion and flotation‐assisted dispersive liquid–liquid microextraction, and could be applied for the determination of n‐alkanes in complicated soil samples with acceptable recoveries.     

Ionic‐liquid‐based dispersive liquid–liquid microextraction for high‐throughput multiple food contaminant screening

This paper describes an innovation of dispersive liquid–liquid microextraction enabling multiple‐component analysis of eight high‐priority food contaminants in two chemically distinctive families: Sudan dyes and phthalate plasticizers. To provide convenient sample handling for solid and solid‐containing matrices, a modified dispersive liquid–liquid microextraction procedure used an extractant precoated frit to perform simultaneous filtration, solvent mixing, and phase dispersion in one simple step. A binary ionic liquid extractant system was carefully tuned to deliver high quality analysis based only on affordable LC with diode array detector instrumentation. The method is comprehensively validated for robust quantification with good precision (6.9–9.8% RSD) in a linear 2–1000 μg/L range. Having accomplished enrichment factors up to 451, the treatment enables sensitive detection at 0.09–1.01 μg/L levels. Analysis of six high‐risk solid condiments and sauces further verified its practical applicability within a 70–120% recovery range. Compared to other approaches, the current dispersive liquid–liquid microextraction treatment offers major advantages in terms of minimal solvent (1.5 mL) and sample (0.1 g) consumption, ultra‐high analytical throughput (6 min), and the ability to handle complex solid matrices. The idea of performing simultaneous analysis for multiple contaminants presented here fosters a more effective mode of operation in food control routines.     

Towards N‐Alkylimidazole Borane‐based Hypergolic Fuels

Over the past few decades, toxic and highly volatile hydrazine derivatives have been the main fuel choices for liquid bipropellants, especially in traditional hypergolic rocket engines. The search for new hypergolic fuels as replacements for hydrazine derivatives is of great interest to researchers. In this study, a series of N‐alkylimidazole borane compounds has been synthesized and characterized. Interestingly, these compounds display promising applications as potential hypergolic fuels owing to their excellent physiochemical properties including low melting points, high thermal stability, low viscosities, and unique hypergolic reactivity. Compared with popular hypergolic ionic liquids, the cost‐effective and scaling‐up advantages of these materials highlight their promising potential as high‐performance fuels in liquid bipropellant formulations.     

A Self‐Sampling‐and‐Flow Biosensor for Continuous Monitoring

A self‐sampling‐and‐flow biosensor was fabricated by sandwiching a nitrocellulose strip on the working electrode side of the double‐sided microporous gold electrodes and a wicking pad on the counter electrode side. The double‐sided microporous electrodes were formed by plasma sputtering of gold on a porous nylon substrate. Sample was taken up to the enzyme‐immobilized working electrode by the capillary action of the front nitrocellulose strip dipped into the sample solution, analyzed electrochemically at the enzyme‐immobilized electrode, and diffuses out to the backside wicking pad through the micropores of the electrodes, constituting a complete flow cell device with no mechanical liquid‐transporting device. Biosensor was formed by co‐immobilizing the glucose oxidase and electron transfer mediator (ferrocene acetic acid) on the thioctic acid self‐assembled monolayer‐modified working electrode. A typical response time of the biosensor was about 5 min with the sensitivity of 2.98 nA/mM glucose, providing linear response up to 22.5 mM. To demonstrate the use of self‐sampling‐and‐flow biosensor, the consumption rate of glucose in the presence of yeast was monitored for five days.     

Carbocatalysis in Liquid‐Phase Reactions

There is broad interest in metal‐free catalysis for sustainable chemistry. Carbocatalysis is a “green” option for catalytic transformations in the gas phase as well as in the liquid phase. This is evident by the numerous reports on gas‐phase dehydrogenation and selective oxidation where carbon can be used as a successful alternative to metal oxide systems. Carbocatalysis for liquid‐phase reactions, especially for organic synthesis, is an emerging research discipline and has undergone rapid development in recent years. This Review provides a critical analysis on the state‐of‐the‐art of carbocatalysts for liquid‐phase reactions, with a focus on the underlying mechanisms as well as the advantages and limitations of metal‐free carbocatalysts.     

Flow‐Based Enzymatic Ligation by Sortase A

Sortase‐mediated ligation (sortagging) is a versatile, powerful strategy for protein modification. Because the sortase reaction reaches equilibrium, a large excess of polyglycine nucleophile is often employed to drive the reaction forward and suppress sortase‐mediated side reactions. A flow‐based sortagging platform employing immobilized sortase A within a microreactor was developed that permits efficient sortagging at low nucleophile concentrations. The platform was tested with several reaction partners and used to generate a protein bioconjugate inaccessible by solution‐phase batch sortagging.     

A Facile One‐Pot Three‐Component Synthesis of 5‐(Trifluoromethyl)‐4,7‐dihydro‐[1,2,4]‐triazolo[1,5‐a]pyrimidine Derivatives in Ionic Liquid

An efficient one‐pot synthesis of 5‐(trifluoromethyl)‐4,7‐dihydro‐7‐aryl‐[1,2,4]triazolo[1,5‐a]pyrimidine derivatives was performed via the reaction of aryl aldehyde, 3‐amino‐1,2,4‐triazole and ethyl 4,4,4‐trifluoro‐3‐oxobutanoate or 4,4,4‐trifluoro‐1‐phenylbutane‐1,3‐dione in ionic liquid. This method has the advantages of short synthetic route, operational simplicities, mild reaction conditions, high yields and eco‐friendliness.