A Cationic Unsaturated Platinum(II) Complex that Promotes the Tautomerization of Acetylene to Vinylidene

Complex [PtMe₂(PMe₂Ar )] ( 1 ), which contains a tethered terphenyl phosphine (Ar =2,6‐(2,6‐ⁱ Pr₂C₆H₃)₂C₆H₃), reacts with [H(Et₂O)₂]BAr_F (BAr_F⁻=B[3,5‐(CF₃)₂C₆H₃]₄⁻) to give the solvent (S) complex [PtMe(S)(PMe₂Ar )]⁺ ( 2⋅S ). Although the solvent molecule is easily displaced by a Lewis base (e.g., CO or C₂H₄) to afford the corresponding adducts, treatment of 2⋅S with C₂H₂ yielded instead the allyl complex [Pt(η³‐C₃H₅)(PMe₂Ar )]⁺ ( 6 ) via the alkyne intermediate [PtMe(η²‐C₂H₂)(PMe₂Ar )]⁺ ( 5 ). Deuteration experiments with C₂D₂, and kinetic and theoretical investigations demonstrated that the conversion of 5 into 6 involves a Pt^II‐promoted HC≡CH to :C=CH₂ tautomerization in preference over acetylene migratory insertion into the Pt−Me bond.     

A Ferroelectric Iron(II) Spin Crossover Material

A dual‐function material in which ferroelectricity and spin crossover coexist in the same temperature range has been obtained. Our synthetic strategy allows the construction of acentric crystal structures in a predictable way and is based on the high directionality of hydrogen bonds. The well‐known iron(II) spin crossover complex [Fe(bpp)₂]²⁺ (bpp=2,6‐bis(pyrazol‐3‐yl)pyridine), a four‐fold noncentrosymmetric H‐bond donor, was combined with a disymmetric H‐bond acceptor such as the isonicotinate (isonic) anion to afford [Fe(bpp)₂](isonic)₂⋅2 H₂O. This low‐spin iron(II) compound crystallizes in the acentric nonpolar I space group and shows piezoelectricity and SHG properties. Upon dehydration, it undergoes a single‐crystal to single‐crystal structural rearrangement to a monoclinic polar Pc phase that is ferroelectric and exhibits spin crossover.     

Confined Lewis Pairs: Investigation of the X−→Si20 Interaction in Halogen-Encapsulating Silafulleranes

A joint theoretical and experimental study on 32 endohedral silafullerane derivatives [X@Si₂₀Y₂₀]⁻ (X=F-I; Y=F-I, H, Me, Et) and -[Cl@Si₂₀H₁₂Y₈]⁻ (Y=F-I) is presented. First, we evaluated the structure-determining template effect of Cl⁻ in a systematic series of concave silapolyquinane model systems. Second, we investigated the X⁻→Si₂₀ interaction energy ( ) as a function of X⁻ and Y and found the largest values for electron-withdrawing exohedral substituents Y. Given that X⁻ ions can be considered as Lewis bases and empty Si₂₀Y₂₀ clusters as Lewis acids, we classify our inseparable host–guest complexes [X@Si₂₀Y₂₀]⁻ as “confined Lewis pairs”. Third, ³⁵Cl NMR spectroscopy proved to be highly diagnostic for an experimental assessment of the Cl⁻→Si₂₀ interaction as the paramagnetic shielding and, in turn, (³⁵Cl) of the endohedral Cl⁻ ion correlate inversely with . Finally, we disclose the synthesis of [PPN][Cl@Si₂₀Y₂₀] (Y=Me, Et, Br) and provide a thorough characterization of these new silafulleranes.     

(111) Facet-oriented Cu2Mg Intermetallic Compound with Cu3-Mg Sites for CO2 Electroreduction to Ethanol with Industrial Current Density

The efficient ethanol electrosynthesis from CO₂ is challenging with low selectivity at high CO₂ electrolysis rates, due to the competition with H₂ and other reduction products. Copper-based bimetallic electrocatalysts are potential candidates for the CO₂-to-ethanol conversion, but the secondary metal has mainly been focused on active components (such as Ag, Sn) for CO₂ electroreduction, which also promote selectivity of ethylene or other reduction products rather than ethanol. Limited attention has been given to alkali-earth metals due to their inherently active chemical property. Herein, we rationally synthesized a (111) facet-oriented nano Cu₂Mg (designated as Cu₂Mg(111)) intermetallic compound with high-density ordered Cu₃-Mg sites. The in situ Raman spectroscopy and density function theory calculations revealed that the Cu₃^{− −}-Mg^{− +} active sites allowed to increase *CO surface coverage, decrease reaction energy for *CO−CO coupling, and stabilize *CHCHOH intermediates, thus promoting the ethanol formation pathway. The Cu₂Mg(111) catalyst exhibited a high FE_C2H5OH of 76.2±4.8 % at 600 mA⋅cm⁻², and a peak value of |j_C2H5OH| of 720±34 mA⋅cm⁻², almost 4 times of that using conventional Cu₂Mg with (311) facets, comparable to the best reported values for the CO₂-to-ethanol electroreduction.     

Electrocatalytic Synthesis of Ammonia at Room Temperature and Atmospheric Pressure from Water and Nitrogen on a Carbon‐Nanotube‐Based Electrocatalyst

Ammonia is synthesized directly from water and N₂ at room temperature and atmospheric pressure in a flow electrochemical cell operating in gas phase (half‐cell for the NH₃ synthesis). Iron supported on carbon nanotubes (CNTs) was used as the electrocatalyst in this half‐cell. A rate of ammonia formation of 2.2×10⁻³ g m⁻² h⁻¹ was obtained at room temperature and atmospheric pressure in a flow of N₂, with stable behavior for at least 60 h of reaction, under an applied potential of −2.0 V. This value is higher than the rate of ammonia formation obtained using noble metals (Ru/C) under comparable reaction conditions. Furthermore, hydrogen gas with a total Faraday efficiency as high as 95.1 % was obtained. Data also indicate that the active sites in NH₃ electrocatalytic synthesis may be associated to specific carbon sites formed at the interface between iron particles and CNT and able to activate N₂, making it more reactive towards hydrogenation.     

Crossover between Tilt Families and Zero Area Thermal Expansion in Hybrid Prussian Blue Analogues

Materials in the family of Prussian blue analogues (C₃H₅N₂)₂K[ M (CN)₆], where C₃H₅N₂ is the imidazolium ion and M =Fe, Co, undergo two phase transitions with temperature; at low temperatures the imidazolium cations have an ordered configuration (C 2/c ), while in the intermediate‐ and high‐temperature phases (both previously reported as ) they are dynamically disordered. We show from high‐resolution powder neutron diffraction data that the high‐temperature phase has zero area thermal expansion in the ab ‐plane. Supported by Landau theory and single‐crystal X‐ray diffraction data, we re‐evaluate the space group symmetry of the intermediate‐temperature phase to . This reveals that the low‐to‐intermediate temperature transition is due to competition between two different tilt patterns of the [ M (CN)₆]³⁻ ions. Controlling the relative stabilities of these tilt patterns offers a potential means to tune the exploitable electric behaviour that arises from motion of the imidazolium guest.     

A Modular Approach to Inorganic Phosphazane Macrocycles

Inorganic macrocycles, based on non‐carbon backbones, present exciting synthetic challenges in the systematic assembly of inorganic molecules, as well as new avenues in host–guest and supramolecular chemistry. Here we demonstrate a new high‐yielding modular approach to a broad range of trimeric and hexameric S‐ and Se‐bridged inorganic macrocycles based on cyclophosphazane frameworks, using the building blocks [S=(H)P(μ‐NR)]₂. The method involves the in situ generation of the key intermediate [E (S )P(μ‐NR)]₂²⁻(E=S, Se) dianion, which can be reacted with electrophilic [ClP(μ‐NR)]₂ to give P^III/P^V hexameric rings or reacted with I₂ to give trimeric P^V variants. Important issues which are highlighted in this work are the competitive bridging ability of S versus Se in these systems and the synthesis of the first air‐stable and chiral inorganic macrocycles.     

The β‐Agostic Structure in (C5Me5)2Sc(CH2CH3): Solid‐State NMR Studies of (C5Me5)2Sc−R (R=Me,Ph, Et)

Multinuclear solid‐state NMR studies of Cp*₂Sc−R (Cp*=pentamethylcyclopentadienyl; R=Me, Ph, Et) and DFT calculations show that the Sc−Et complex contains a β‐CH agostic interaction. The static central transition ⁴⁵Sc NMR spectra show that the quadrupolar coupling constants (C_q) follow the trend of Ph≈Me>Et, indicating that the Sc−R bond is different in Cp*₂Sc−Et compared to the methyl and phenyl complexes. Analysis of the chemical shift tensor (CST) shows that the deshielding experienced by Cβ in Sc−CH₂CH₃ is related to coupling between the filled σ_C‐C orbital and the vacant orbital.     

Multiple Roles of Isocyanides in Palladium‐Catalyzed Imidoylative Couplings: A Mechanistic Study

Kinetic, spectroscopic and computational studies examining a palladium‐catalyzed imidoylative coupling highlight the dual role of isocyanides as both substrates and ligands for this class of transformations. The synthesis of secondary amides from aryl halides and water is presented as a case study. The kinetics of the oxidative addition of ArI with RNC‐ligated Pd⁰ species have been studied and the resulting imidoyl complex [(ArC=NR)Pd(CNR)₂I] (Ar=4‐F‐C₆H₄, R=tBu) has been isolated and characterized by X‐ray diffraction. The unprecedented ability of this RNC‐ligated imidoyl‐Pd complex to undergo reductive elimination at room temperature to give the amide in the presence of water and an F^?/HF buffer is demonstrated. Its behavior in solution has also been characterized, revealing an unexpected strong tendency to give cationic complexes, and notably [(ArC=NR)Pd(CNR)₃]⁺ with excess isocyanide and [(ArC=NR)Pd( )(CNR)]⁺ with bidentate phosphines ( ). These species may be responsible for catalyst deactivation and side‐reactions. Ab initio calculations performed at the DFT level allowed us to rationalize the multiple roles of RNC in the different steps of the catalytic cycle.     

Low‐Voltage Gaseous HCl Electrolysis with an Iron Redox‐Mediated Cathode for Chlorine Regeneration

Gaseous HCl as a by‐product is often produced from chlorination processes using Cl₂ gas. Onsite Cl₂ regeneration from HCl is highly desirable as it eliminates the need to buy new Cl₂ and dispose HCl waste. A gaseous HCl electrolysis with Fe³⁺/Fe²⁺ redox‐mediated cathode is demonstrated for Cl₂ regeneration. HCl is oxidized to generate Cl₂ and protons in the anode while Fe³⁺ is reduced to Fe²⁺ in the cathode. Simultaneously Fe³⁺ is regenerated by chemical oxidation of Fe²⁺ by oxygen (air) that also produces water. A low operational voltage and high coulombic efficiency are achieved by using a novel composite porous membrane and hydrophobic anode. Specifically, a cell voltage of only 0.64 V is needed at the typical current density of 4 kA m⁻², leading to a low energy consumption of 483 kWh per ton of Cl₂ (124 kJ mol ⁻¹) which is about 50–55 % of state‐of‐the‐art HCl electrolysis processes.     

Reentrant Structural Transitions and Collapse of Charge and Orbital Orders in Quadruple Perovskites

Charge and orbital degrees of freedom determine properties of many materials, and are central to many important phenomena. At high temperatures, thermal fluctuations overcome them, and high‐symmetry structures are realized. On decreasing temperature, different charge‐ and orbital‐order transitions take place accompanied by symmetry lowering. Remarkable exceptions to this general tendency, realized in Cu‐doped BiMn₇O₁₂ quadruple perovskites, are presented. Introduction of Cu²⁺ produces mixtures of Mn³⁺ and Mn⁴⁺ and charge degree of freedom. BiCuMn₆O₁₂ (and compositions in the vicinity) exhibits well‐defined 1:3 charge order of Mn⁴⁺ and Mn³⁺ and orbital order of Mn³⁺ near room temperature, but both charge and orbital orders collapse below about 115 K with the reentrance of the high‐temperature cubic Im phase. What is interesting the collapse can be controlled by a magnetic field even without long‐range magnetic order, and the collapsed phase shows nearly zero thermal expansion.     

Oxidative Cleavage of S–S Bond During the Reduction of Tris(pyridine‐2‐carboxylato)manganese(III) by Dithionite in Sodium Picolinate–Picolinic Acid Buffer Medium

The reduction of tris(pyridine‐2‐carboxylato)manganese(III) by dithionite has been investigated within the temperature window 288–303 K and at pH range 5.22–6.10 in sodium picolinate–picolinic acid buffer medium. The reaction obeys the following stoichiometry: The reaction is described in terms of a mechanism that involves an initial complex formation between S₂O₄^2? and [Mn^III(C₅H₄NCO₂)₃] followed by S–S bond cleavage to give 2HSO₃^? and [Mn^II(C₅H₄NCO₂)₂(H₂O)₂] as the products via the formation of SO₂^●? radical anion. Kinetics and spectrophotometric evidences are cited in favor of the suggested mechanism. Thermodynamic parameters associated with the equilibrium step and the activation parameters with the rate‐determining step have been computed.     

Development of a Perchlorate Chemical Sensor Based on Magnetic Nanoparticles and Silicon Nitride Capacitive Transducer

We report in this work the development of a novel capacitance electrochemical sensors based on silicon nitride substrate (Si₃N₄) chemically modified with a structure of Cobalt phthalocyanine, C,C,C,C‐tetracarboxylic acid‐Polyacrylamide (Co(II)Pc‐PAA). This sensitive layer was tested with and without magnetic nanoparticles (MNP) for perchlorate ( ) detection. The developed chemical sensor with Si₃N₄/APTES‐MNP/Co(II)Pc‐PAA structure has shown a better performance when compared to the other structure based on Si₃N₄/Co(II)Pc‐PAA. Contact angle measurements (CAM) and atomic force microscopy (AFM) characterizations have been performed to characterize the functionalization of the chemical sensors surface. Under the optimized structure of the chemical sensor, electrochemical measurements were carried out using Mott‐Schottky analysis for detection within the large range of 10⁻¹⁰ to 10⁻⁴ M with a very low detection limit of 2×10⁻¹⁰ M. The chemical sensor has demonstrated a high selectivity toward when compared to other interfering anions such as Cl⁻, SO₄²⁻, and CO₃²⁻. The present capacitive chemical sensor is very promising for sensitive and rapid detection of for environmental applications.     

Impact of Intramolecular Hydrogen Bonding on the Reactivity of Cupric Superoxide Complexes with O−H and C−H Substrates

The dioxygen reactivity of a series of TMPA‐based copper(I) complexes (TMPA=tris(2‐pyridylmethyl)amine), with and without secondary‐coordination‐sphere hydrogen‐bonding moieties, was studied at ?135 °C in 2‐methyltetrahydrofuran (MeTHF). Kinetic stabilization of the H‐bonded [( TMPA)Cu^II(O₂^.?)]⁺ cupric superoxide species was achieved, and they were characterized by resonance Raman (rR) spectroscopy. The structures and physical properties of [( TMPA)Cu^II(N₃^?)]⁺ azido analogues were compared, and the O₂^.? reactivity of ligand–Cu^I complexes when an H‐bonding moiety is replaced by a methyl group was contrasted. A drastic enhancement in the reactivity of the cupric superoxide towards phenolic substrates as well as oxidation of substrates possessing moderate C?H bond‐dissociation energies is observed, correlating with the number and strength of the H‐bonding groups.     

Large Magnetoelectric Coupling Near Room Temperature in Synthetic Melanostibite Mn2FeSbO6

Multiferroic materials exhibit two or more ferroic orders and have potential applications as multifunctional materials in the electronics industry. A coupling of ferroelectricity and ferromagnetism is hereby particularly promising. We show that the synthetic melanostibite mineral Mn₂FeSbO₆ (R space group) with ilmenite‐type structure exhibits cation off‐centering that results in alternating modulated displacements, thus allowing antiferroelectricity to occur. Massive magnetoelectric coupling (MEC) and magnetocapacitance effect of up to 4000 % was detected at a record high temperature of 260 K. The multiferroic behavior is based on the imbalance of cationic displacements caused by a magnetostrictive mechanism, which sets up an unprecedented example to pave the way for the development of highly effective MEC devices operational at or near room temperature.     

A T‐Shaped Nickel(I) Metalloradical Species

A T‐shaped Ni^I complex was synthesized using a rigid acridane‐based pincer ligand to prepare a metalloradical center. Structural data displays a nickel ion is embedded in the plane of a PNP ligand. Having a sterically exposed half‐filled orbital, this three‐coordinate Ni^I species reveals unique open‐shell reactivity including the homolytic cleavage of various σ‐bonds, such as H−H, N−N, and C−C.     

Tunable Self‐Assembly of Diblock Copolymers into Colloidal Particles with Triply Periodic Minimal Surfaces

We herein report the tunable self‐assembly of simple block copolymers, namely polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) diblock copolymers, into porous cubosomes with inverse or mesophases of controlled unit cell parameters as well as hexasomes with an inverse hexagonal (p 6mm ) structure, which have been rarely observed in polymer self‐assembly. A new morphological phase diagram was constructed for the solution self‐assembly of PS‐b‐PEO based on the volume fraction of the PS block against the initial copolymer concentration. The formation mechanisms of the cubosomes and hexasomes have also been revealed. This study not only affords a simple system for the controllable preparation and fundamental studies of ordered bicontinuous structures, but also opens up a new avenue towards porous architectures with highly ordered pores.     

Engineering the Coordination Environment of Single‐Atom Platinum Anchored on Graphdiyne for Optimizing Electrocatalytic Hydrogen Evolution

Two Pt single‐atom catalysts (SACs) of Pt‐GDY1 and Pt‐GDY2 were prepared on graphdiyne (GDY)supports. The isolated Pt atoms are dispersed on GDY through the coordination interactions between Pt atoms and alkynyl C atoms in GDY, with the formation of five‐coordinated C₁‐Pt‐Cl₄ species in Pt‐GDY1 and four‐coordinated C₂‐Pt‐Cl₂ species in Pt‐GDY2. Pt‐GDY2 shows exceptionally high catalytic activity for the hydrogen evolution reaction (HER), with a mass activity up to 3.3 and 26.9 times more active than Pt‐GDY1 and the state‐of‐the‐art commercial Pt/C catalysts, respectively. Pt‐GDY2 possesses higher total unoccupied density of states of Pt 5d orbital and close to zero value of Gibbs free energy of the hydrogen adsorption (|Δ |) at the Pt active sites, which are responsible for its excellent catalytic performance. This work can help better understand the structure–catalytic activity relationship in Pt SACs.     

Mechanochemical Synthesis of 3d Transition‐Metal–1,2,4‐Triazole Complexes as Precursors for Microwave‐Assisted and Thermal Conversion to Coordination Polymers with a High Influence on the Dielectric Properties

The complexes [MCl₂(TzH)₄] (M=Mn ( 1 ), Fe ( 2 ); TzH=1,2,4‐1H‐triazole) and [ZnCl₂(TzH)₂] ( 3 ) have been obtained by mechanochemical reactions of the corresponding divalent metal chloride and 1,2,4‐1H‐triazole. They were successfully used as precursors for the formation of coordination polymers either by a microwave‐assisted reaction or by thermal conversion. For manganese, the conversion directly yielded [MnCl₂TzH] ( 4 ), whereas for the iron‐containing precursor, [FeCl₂TzH] ( 6 ), was formed via the intermediate coordination polymer [FeCl(TzH)₂]Cl ( 5 ). For cobalt, the isotypic polymer [CoCl(TzH)₂]Cl ( 7 ) was obtained, but exclusively by a microwave‐induced reaction directly from CoCl₂. The crystal structures were resolved from single crystals and powders. The dielectric properties were determined and revealed large differences in permittivity between the precursor complexes and the rigid chain‐like coordination polymers. Whereas the monomeric complexes exhibit very different dielectric behaviour, depending on the transition metal, from “low‐k” to “high‐k” with the permittivity ranging from 4.3 to >100 for frequencies of up to 1000 Hz, the coordination polymers and complexes with strong intermolecular interactions are all close to “low‐k” materials with very low dielectric constants up to 50 °C. Therefore, the conversion procedures can be used to deliberately influence the dielectric properties from complex to polymer and for different 3d transition‐metal ions.