Structural characterization of polybutadiene synthesized via cationic mechanism

The microstructure of polybutadiene synthesized via cationic polymerization using TiCl₄‐based initiating systems has been investigated using 1D (¹Н, ²Н, and ¹³С) and 2D (HSQC and HMBC) NMR spectroscopy. It was found that trans‐1,4‐unit is predominant structure of unsaturated part of polymer chain. Besides, the small amount of 1,2‐structures was also detected, while cis‐1,4‐units were totally absent. The signals of carbon atoms of three types of head groups (trans‐1,4‐, 1,2‐, and tert‐butyl) and two types of end groups (trans‐1,4‐Cl and 1,2‐Cl) were identified for the first time in macromolecules of cationic polybutadiene. It was showed that tert‐butyl head groups were formed due to the presence in monomer of admixtures of isobutylene. The new methodology for calculation of the content of different structural units in polybutadiene chain as well as the head and end groups was proposed. It was established that main part of 1,2‐units distributed randomly along the polybutadiene chain as separate units between trans‐1,4‐structures. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 387–398     

Copolymers of phenylacetylene and para‐nitrophenylacetylene with nonlinear optical properties: Further insight on the conformational structure

Copolymers of phenylacetylene (PA) and para‐nitrophenylacetylene (pNPA), named poly(PA‐co‐pNPA), were obtained in different PA/pNPA ratios and different reaction conditions with Rh(I) catalysts. The structure of the copolymers was investigated with IR, laser Raman, ¹H NMR, electron spin resonance (ESR), and diffuse reflective ultraviolet–visible (DRUV) light spectroscopies. The pristine polymers had a cis–transoidal structure as the predominant conformation with some trans sequences. Detailed ESR studies supported by computer simulation and conformation analysis have suggested that the trans sequences were due to pNPA sequences and that the cis‐C?C bond sequences of pNPA were associated with a stabilized cis radical formed by four to five of pNPA monomers. This particular stabilization was probably the reason for the higher reactivity of pNPA as compared with PA. These cis sequences were preferentially cleaved to generate π radicals. The compression and, to a minor extent, thermal treatment of poly(PA‐co‐pNPA) samples induced a cis‐to‐trans isomerization, leading to a trans–transoidal form with a planar zigzag structure and with a conjugation length up to n = 24 repeat units, determined by DRUV and Raman experiments. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2365–2376, 2004     

Reactivity of common functional groups with urethanes: Models for reactive compatibilization of thermoplastic polyurethane blends

Two model urethane compounds, dibutyl 4,4′‐methylenebis(phenyl carbamate) (BMB) and dioctyl 4,4′‐methylenebis(phenyl carbamate) (OMO) were prepared by capping 4,4′‐methylenebis(phenyl isocyanate) with n‐butanol and n‐octanol, respectively. The reactions of the two model urethane compounds with several small monofunctional compounds as well as two model poly(ethylene glycols) were carried out with neat mixtures at elevated temperatures. The ranking of reactivity of the functional groups with the urethanes was determined as follows—primary amine > secondary amine ? hydroxyl ～ acid ～ anhydride ? epoxide. Nuclear magnetic resonance spectroscopy (NMR) was used for the quantitative analysis. Fourier transform infrared spectroscopy was used to complement the NMR analysis. Conversions of carbamate in each reaction were monitored over time at constant temperature (200 °C). The reactions between OMO and primary amine were conducted at 170, 180, 190, and 200 °C and best described with a second‐order bimolecular reaction model. The rate constant was estimated to be 1.8 × 10^?3 L · mol^?1 · s^?1 and activation energy 115 kJ · mol^?1. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2310–2328, 2002     

End‐group characterization of homo‐ and copolyesters of cyclohexane‐1,4‐dimethanol

End groups after the thermal degradation of poly(ethylene terephthalate) (PET) and its cyclohexanedimethanol (CHDM) copolymer were characterized with ¹H NMR. Thermally degraded polymers were obtained by heat treatment at 290 °C. For the PET homopolymer, a vinyl end group appeared, which resulted from thermal cis‐β‐elimination. For the CHDM copolymer, in addition to a vinyl end group, methylcyclohexene and cyclovinylidene end groups originating from CHDM were formed. The assignment of the ¹H NMR spectrum was performed with information from ¹³C NMR and gas chromatography‐mass spectrometry. The total amounts of unsaturated species measured by NMR were compared with those estimated by bromination titration. There was good agreement between the values obtained by the two methods, indicating that all the major unsaturated species were accounted for. The mechanism of the formation of the unsaturated end groups was investigated. We suggest, on the basis of the NMR measurements, that the methylcyclohexene and cyclovinylidene groups originating from CHDM were formed by thermal cis‐β‐elimination as for the PET homopolymer. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 665–674, 2001     

端羟基液体聚丁二烯微观结构的13C-NMR研究

本文研究了在乙醇溶剂中用过氧化氢引发聚合的端羟基液体聚丁二烯(简称丁羟)的¹³C-NMR谱,发现了RCH=CHCH₂OH(反式)和RR′C=CHCH₂OH共振峰,肯定了这两种端基结构。确定了在聚合过程中乙醇转移到分子链端的主要结构是RCH=CHCH₂CH(OH)CH₃(顺式和反式),它占羟基总量8%左右。工作还确认,在丁羟中尚存在少量的长支化结构以及醇、醛端基结构。     

Synthesis and characterization of chiral poly(alkyl isocyanates) by coordination polymerization using a chiral half‐titanocene complex

A new chiral half‐titanocene complex, [CpTiCl₂(O‐(S)?2‐Bu)], is synthesized and characterized by ¹H and ¹³C NMR spectroscopy. This complex is employed for the coordination polymerization of n‐butyl and n‐hexyl‐ isocyanate leading to chiral polymers, as revealed by their CD spectra. Only the left‐handed helix is produced, due to the chiral (S)?2‐butoxy group, which is bound to the polymer chain end. The polymerization of 3‐(triethoxysilyl)propyl isocyanate produces less soluble polymers. On the other hand, phenyl isocyanate reacts slowly with the complex leading quantitatively and selectively to triphenyl isocyanurate. 2‐Ethylhexyl isocyanate is slowly and selectively cyclotrimerized in the presence of the half‐titanocene complex. However, a statistical copolymer of 2‐ethylhexyl isocyanate and hexyl isocyanate is produced. The reaction of benzyl isocyanate with the complex leads to a mixture of low molecular weight polymer and cyclotrimer. The polymers are characterized using SEC, NMR, and CD spectroscopy and their thermal properties are investigated by TGA/DSC analysis. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2141–2151     

Acetalization of poly(vinyl alcohol) by a fatty aldehyde in water medium: Model study,kinetics, and structure analysis

Acid catalyzed poly(vinyl alcohol) (PVA) acetalization was investigated in aqueous medium at 80 °C for a PVA concentration of 8 wt %. The reactant, 10‐undecenal, was composed of a long alkyl chain with a vinyl end group, and the functionalization reaction was studied in heterogeneous media for low reactant concentrations (from 0.33 to 2.0 mol % compared with PVA hydroxyl groups concentration). First, the reaction was scrutinized with pentane‐2,4‐diol, as a model compound of PVA. Besides the expected reaction, the oxidation of the aldehyde into 10‐undecenoic acid in the presence of water was evidenced. This carboxylic acid appeared unreactive toward esterification of pentane‐2,4‐diol and PVA in water. Characterization of acetal stereochemical structure formed on the PVA backbone was performed by NMR spectroscopy in accordance to the model approach. A protocol based on ¹H NMR analysis was developed to quantify grafted aldehyde, residual aldehyde, and created carboxylic acid through direct sampling of the reaction medium. Conversions and reaction rate constants were calculated for pH ranging from 1 to 3. Finally, the acetalization yield was found to be enhanced at low pH and, in such conditions, the oxidation reaction contribution was limited. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 661–671     

Synthesis and characterization of chiral poly(l‐lactide‐b‐hexyl isocyanate) macromonomers with norbornenyl end groups and their homopolymerization through ring opening metathesis polymerization to afford polymer brushes

We report the synthesis of the novel half‐titanocene alkoxide complex bischloro‐η⁵‐cyclopentadienyl(bicyclo[2.2.1]‐hept‐5‐en‐2‐oxy) titanium (IV), [CpTiCl₂(O‐NBE)]. This complex was employed for the synthesis of chiral poly(l ‐lactide‐b‐hexyl isocyanate) diblock copolymer bearing a norbornene end group with sequential addition of monomers. The poly(hexyl isocyanate) block is chiral due to the last l ‐lactide unit of the poly(l ‐lactide) block. This macromonomer was polymerized towards a chiral polymer brush structure with polynorbornene backbone and chiral poly(l ‐lactide‐b‐hexyl isocyanate) side chains using Grubbs first‐generation catalyst. The polymers were characterized using size exclusion chromatography (SEC), nuclear magnetic resonance (NMR), and circular dichroism (CD) spectroscopy and their thermal properties were investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1102–1112     

Functionalization of polyisobutylene and polyisobutylene oligomers via the ritter reaction

The Ritter reaction, that is, reaction of a carbocation with a nitrile, was carried out on polyisobutylene (PIB) using a variety of reaction conditions. End quenching of PIB carbocations with acrylonitrile under living polymerization conditions (methyl chloride (MeCl)/hexane 60/40 (v/v) solvent mixtures at −70 °C) resulted in either tert‐chloride end groups or loss of chain‐end fidelity via carbocation rearrangement, as evidenced by NMR spectroscopy. Exo‐olefin functionalized PIB substrates were also reacted with nitriles under a variety of reaction conditions including various acid and solvent medium combinations. In all cases, the result was either no reaction or PIB that had undergone severe backbone degradation, as determined via NMR spectroscopy and gel permeation chromatography. Finally, the Ritter reaction was performed on a series of exo‐olefin functionalized oligoisobutylenes using acrylonitrile as the nitrile and either 60/40 dichloromethane/hexane or excess acrylonitrile as the solvent. In 60/40 dichloromethane/hexane, significant carbocation rearrangement and/or degradation resulted in a variety of isomeric, acrylamide‐functionalized oligomers. In excess acrylonitrile, the desired Ritter reaction was the only reaction observed, resulting in the smooth formation of the terminal acrylamide. The various N‐oligoisobutylacrylamides thus obtained represent new hydrophobic monomers useful for the introduction of hydrophobic moieties into acrylamide‐based water‐soluble polymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 840–852     

Synthesis and characterization of N‐substituted hyperbranched polyureas

N,N′‐disubstituted hyperbranched polyureas with methyl, benzyl, and allyl substitutents were synthesized starting from AB₂ monomers based on 3,5‐diamino benzoic acid. Carbonyl azide approach, which generates isocyanate group in situ on thermal decomposition, was used for the protection of isocyanate functional groups. The N‐substituted hyperbranched polymers can be considered as the new class of internally functionalized hyperbranched polyureas wherein the substituent can function either as receptor or as a chemical entity for selective transformations as a tool to tailor the properties. The chain‐ends were also modified by attaching long chain aliphatic groups to fully realize the interior functionalization. This approach opens up a possible synthetic route wherein different functional substituents can be used to generate a library of internally functionalized hyperbranched polymers. All the hyperbranched polyureas were characterized by FTIR, ¹H‐NMR, DSC, TGA, and size exclusion chromatography. Degree of branching in these N,N′‐disubstituted hyperbranched polyureas, as calculated by ¹H‐NMR spectroscopy using model compounds, was found to be lower than the unsubstituted hyperbranched polyurea and is attributed to the lower reactivity of N‐substituted amines compared to that of unsubstituted amines. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5134–5145, 2004     

Nanostructured polymetallaynes of controlled length: Synthesis and characterization of oligomers and polymers from 1,1′‐bis‐(ethynyl)4,4′‐biphenyl bridging Pt(II) or Pd(II) centers

The reactivity of square planar palladium(II) and platinum(II) complexes in trans or cis configuration, namely trans or cis‐[dichlorobis(tributylphosphine)platinum(II)] and trans‐[dichlorobis(tributylphosphine)palladium(II)] with 1,1′‐bis(ethynyl) 4,4′‐biphenyl, DEBP, leading to π‐conjugated organometallic oligomeric and polymeric metallaynes, was investigated by a systematic variation of the reaction conditions. The formation of polymers and oligomers with defined chain length [? M(PBu₃)₂ (C?C? C₆H₄? C₆H₄? C?C? )]_n (n = 3–10 for the oligomers, n = 20–50 for the polymers) depends on the configuration of the precursor Pt(II) and Pd(II) complexes, the presence/absence of the catalyst CuI, and the reaction time. A series of model reactions monitored by XPS, GPC, and NMR ³¹P spectroscopy showed the route to modulate the chain growth. As expected, the nature of the transition metal (Pt or Pd) and the molecular weight of the polymers markedly influence the photophysical characteristics of the polymetallaynes, such as optical absorption and emission behavior. Polymetallaynes with nanostructured morphology could be obtained by a simple casting procedure of polymer solutions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3311–3329, 2007     

Synthesis of polyoxazolines using glycerol carbonate derivative and end chains functionalization via carbonate and isocyanate routes

We report the cationic ring‐opening polymerization of 2‐methyl‐2‐oxazoline (MOx) using bio‐based initiator (GCTs). The functional initiator GCTs was prepared by tosylation of the corresponding alcohol: glycerol carbonate (GC). The termination stage of the polymerization was achieved in presence of KOH and the telechelic polyoxazoline carrying five‐membered cyclic carbonate and oxazolium end groups (GC‐POx^ium) was converted to ((HO)₂‐POx‐OH) carrying α‐diol and ω‐hydroxyl groups. End‐functionalized polyoxazolines (HO)₂‐POx‐OH with M_n ranging from 4200 to 8400 g mol^?1 were synthesized. According to GPC results, the polymerizations of MOx using GCTs and other initiator coming from 1,2‐isopropylidene‐glycerol (Solk‐Ts) were compared. On the basis of FTIR and NMR spectroscopies, the chemical modification of end chains of polyoxazolines was investigated by two alternative synthetic routes. The isocyanate route is a postpolymerization urethanization. The nucleophilic reactivity of the α‐diol and ω‐hydroxyl groups of (HO)₂‐POx‐OH was studied with functional isocyanate (TESPI). In the carbonate route, the electrophilic reactivity of α‐ and ω‐end groups of GC‐POx^ium were explored with amine. It was demonstrated that during the termination stage of the polymerization in presence of allylamine both urethane linker in α‐end chain was synthesized and the ω‐oxazolium group was converted into terminal amine. The carbonate route is an alternative to synthesize urethane without isocyanate. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4027–4035, 2010     

Synthesis and properties of aromatic secondary amine-blocked isocyanates

N-Methylaniline-, diphenylamine-, and N-phenylnaphthylamine-blocked toluene diisocyanates (TDI) were prepared and characterized by IR, NMR spectroscopy, and nitrogen content analyses. The structure–property relationship of these adducts was established by reacting with hydroxyl-terminated polybutadiene (HTPB). The cure rate of the adduct increases from the N-phenylnaphthylamine- to diphenylamine- and to N-methylaniline-blocked TDI adduct. Simultaneous TGA/DTA results also confirm this trend, and the thermal stability of the adduct decreases in the following order: N-phenylnaphthylamine–TDI > diphenylamine–TDI > N-methylaniline–TDI. The gas chromatogram of the amine-blocked isocyanate confirms that the thermolysis products are the blocking agent and isocyanate. The solubilities of the adducts were carried out in polyether, polyester, and hydrocarbon polyols, and it was found that the N-methylaniline–TDI adduct shows higher solubility than the rest and also found that the polyester polyol shows higher solvating power against the adducts than the polyether and hydrocarbon polyols. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1815–1821, 1999     

Novel route to dendritic structures and their application for surface modification

Monodisperse branched polyurethanes containing long alkyl chains have been prepared by a new convergent synthesis. This synthesis comprises two steps, with hexamethylene diisocyanate uretdione as the starting molecule. The free isocyanate groups of this monomer are reacted with long‐chain alkanols. These diurethane uretdiones are then reacted with amines or amino alcohols under ring opening and the formation of a biuret group. Branching points are not, as usual, part of the monomer but are formed during preparation. The structure of these dendrons has been established with NMR spectroscopy, elemental analysis, mass spectroscopy, and gel permeation chromatography. The dendritic polyurethanes are thermally stable up to 200 °C. Surfaces coated with these materials are hydrophobic. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1372–1386, 2006     

Controlled stereochemistry of polyamides derived from cis/trans‐1,4‐cyclohexanedicarboxylic acid

A series of copolyamides 12.y was synthesized either with y = 6, or 1,4‐cyclohexanedicarboxylic acid (1,4‐CHDA) residue, or a mixture of both. The influence of the synthetic route of 1,4‐CHDA containing polyamides on the obtained cis–trans ratio of the incorporated 1,4‐CHDA was investigated. The use of acid chlorides provided a synthetic route with full control of the cis–trans ratio of the 1,4‐CHDA residue during synthesis, whereas synthesis at elevated pressure and temperature caused isomerization. The content and cis–trans ratio of 1,4‐CHDA in the copolyamides were determined by solution ¹³C NMR spectroscopy. Increasing the degree of partial substitution of the adipic acid by 1,4‐CHDA resulted in an increase in T_m, even for low molar precentages of 1,4‐CHDA. This phenomenon points to isomorphous crystallization of both the 12.6 and 12.CHDA repeating units. The mps of the synthesized polyamides were independent of the initial cis–trans ratio of 1,4‐CHDA, provided that the samples were annealed at 300 °C before DSC analysis. The polyamides exhibited a different melting pattern depending on the 1,4‐CHDA content. At a low a 1,4‐CHDA content a net exothermic recrystallization occurred during melting, whereas at higher contents of 1,4‐CHDA this recrystallization occurs to a lesser extent, and two separate melting areas are observed. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 833–840, 2001     

End‐functionalized copolymers prepared by the addition–fragmentation chain‐transfer method: Vinyl acetate/methacrylonitrile system

Copolymers of vinyl acetate and methacrylonitrile were prepared by free‐radical polymerization in the presence of the chain‐transfer agent (CTA) ethyl‐α‐ (t‐butanethiomethyl)acrylate. Molecular weight measurements showed that the chain‐transfer constants increased with the vinyl acetate content of the comonomer mixture, ranging from 0.42 for methacrylonitrile to 6.3 for the copolymerization of a vinyl acetate‐rich monomer mix (89/11). The bulk copolymer composition was not appreciably affected by the amount of CTA used in the copolymerization. The efficiency of the addition–fragmentation mechanism in producing specifically end‐functionalized copolymers was investigated with ¹H NMR spectroscopy. Spectral peaks consistent with all the expected end groups were observed for all comonomer feeds. Peaks consistent with other end groups were also observed, and these were particularly prominent for copolymers made with lower CTA concentrations. At the highest concentrations used, quantitative measurements of end‐group concentrations indicated that 70–80% of the end groups were those expected on the basis of the addition–fragmentation chain‐transfer mechanism. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2911–2919, 2001     

Synthesis,characterization, and properties of novel poly(ether urethanes)

Novel poly(ether urethanes) were synthesized by homo- and random copolymerization of the m- and p-hydroxyethoxy benzoyl azides. Polymerization proceeded by decomposition and rearrangement of the acid azide group to the isocyanate group, which immediately reacted intermolecularly with the hydroxyl group to produce polyurethanes. These polymers were characterized by infrared spectroscopy (IR), nuclear magnetic resonance spectroscopy (NMR), x-ray diffraction, scanning electron microscopy (SEM), viscosity, and solubility. The thermal stability of these polymers was also studied by TG and DTG (derivative TG).     

Carboxylation of a polypentenamer and preparation of its hydrogenated derivatives

Carboxylated three-membered ring derivatives of a polypentenamer (PP) that contained 82% trans and 17% cis double bonds were prepared by carbene addition of ethyldiazoacetate with a copper catalyst to the double bonds and subsequent hydrogenation of the residual unsaturation. In this way derivatives that contained approximately either 5 or 10 mole % three-membered rings with ester side groups were obtained. These side groups were further reacted by hydrolysis or neutralization to form carboxylic acid and cesium salts of carboxylic acid. Reaction conditions were chosen so that no backbone degradation occurred and side reactions that led to crosslinking were avoided. The derivatives were characterized by gel permeation chromatography (GPC), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), infrared (IR) spectroscopy, and nuclear magnetic resonance (NMR) spectroscopy. It was found that an increase in substituent concentration decreased the melting point (T_m) in hydrogenated derivatives and increased the glass transition temperature (T_g) in unhydrogenated derivatives. The cesium salts of carboxylic acid were the least thermally stable among those studied and the hydrogenated derivatives were generally more stable than the unhydrogenated.     

Kinetic study of the crosslinking reaction of 1,2‐polybutadiene with dicumyl peroxide in the absence and presence of vinyl acetate

The crosslinking reaction of 1,2-polybutadiene (1,2-PB) with dicumyl peroxide (DCPO) in dioxane was kinetically studied by means of Fourier transform near-infrared spectroscopy (FTNIR). The crosslinking reaction was followed in situ by the monitoring of the disappearance of the pendant vinyl group of 1,2-PB with FTNIR. The initial disappearance rate (R₀) of the vinyl group was expressed by R₀ = k[DCPO]^0.8[vinyl group]^−0.2 (120 °C). The overall activation energy of the reaction was estimated to be 38.3 kcal/mol. The unusual rate equation was explained in terms of the polymerization of the pendant vinyl group as an allyl monomer involving degradative chain transfer to the monomer. The reaction mixture involved electron spin resonance (ESR)-observable polymer radicals, of which the concentration rapidly increased with time owing to a progress of crosslinking after an induction period of 200 min. The crosslinking reaction of 1,2-PB with DCPO was also examined in the presence of vinyl acetate (VAc), which was regarded as a copolymerization of the vinyl group with VAc. The vinyl group of 1,2-PB was found to show a reactivity much higher than 1-octene and 3-methyl-1-hexene as model compounds in the copolymerization with VAc. This unexpectedly high reactivity of the vinyl group suggested that an intramolecular polymerization process proceeds between the pendant vinyl groups located on the same polymer chain, possibly leading to the formation of block-like polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4437–4447, 2004