Propagation rate coefficients of isobornyl acrylate,tert‐butyl acrylate and 1‐ethoxyethyl acrylate: A high frequency PLP‐SEC study

Pulsed laser polymerization (PLP) coupled to size exclusion chromatography (SEC) is considered to be the most accurate and reliable technique for the determination of absolute propagation rate coefficients, k_p. Herein, k_p data as a function of temperature were determined via PLP‐SEC for three acrylate monomers that are of particular synthetic interest (e.g., for the generation of amphiphilic block copolymers). The high‐T_g monomer isobornyl acrylate (iBoA) as well as the precursor monomers for the synthesis of hydrophilic poly(acrylic acid), tert‐butyl acrylate (tBuA), and 1‐ethoxyethyl acrylate (EEA) were investigated with respect to their propagation rate coefficient in a wide temperature range. By application of a 500 Hz laser repetition rate, data could be obtained up to a temperature of 80 °C. To arrive at absolute values for k_p, the Mark‐Houwink parameters of the polymers have been determined via on‐line light scattering and viscosimetry measurements. These read: K = 5.00 × 10⁵ dL g⁻¹, a = 0.75 (piBoA), K = 19.7 × 10⁵ dL g⁻¹, a = 0.66 (ptBA) and K = 1.53 × 10⁵ dL g⁻¹, a = 0.85 (pEEA). The bulky iBoA monomer shows the lowest propagation rate coefficient among the three monomers, while EEA is the fastest. The activation energies and Arrhenius factors read: (iBoA): log(A/L mol⁻¹ s⁻¹) = 7.05 and E_A = 17.0 kJ mol⁻¹; (tBuA): log(A/L mol⁻¹ s⁻¹) = 7.28 and E_A = 17.5 kJ mol⁻¹ and (EEA): log(A/L mol⁻¹ s⁻¹) = 6.80 and E_A = 13.8 kJ mol⁻¹. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6641–6654, 2009     

Bidentate Pyridyl-Amido Hafnium Catalysts for Copolymerization of Ethylene with 1-Octene and Norbornene

Polyolefin elastomers ( POEs ) and cyclic olefin copolymers ( COCs ) are high-performance polyolefin materials of wide interest. It is crucial to develop low-cost and high-performance transition metal catalysts to prepare these polyolefin materials. In this contribution, we designed and synthesized a series of bidentate pyridyl-amido hafnium catalysts and used them in ethylene polymerization and copolymerization with comonomers including 1-octene and norbornene. These catalysts exhibited high activities of up to 16.3×10⁶ g mol⁻¹ h⁻¹ and produced polyethylene with a high molecular weight of up to 24.5×10⁴ g mol⁻¹ in ethylene polymerization at 150 °C. More importantly, these catalysts produced ethylene/1-octene copolymers with incorporation of up to 13.7 mol % and molecular weight of up to 72.7×10⁴ g mol⁻¹, and prepared ethylene/norbornene copolymers with incorporation of up to 50.3 mol %, along with glass transition temperature of up to 184.3 °C and molecular weight of up to 187.6×10⁴ g mol⁻¹. The ease of synthesis, high versatility and great copolymerization properties of these hafnium catalysts make them highly attractive for future studies.     

Solvo‐thermal Preparation of One Novel Cadmium(II) Coordination Polymer with 1‐(4‐Aminobenzyl)‐1,2,4‐Triazole and Bi‐functional Photo‐Luminescent Sensing for Acetone and Dichromate

In this work a 1,2,4‐triazole derivative 1‐(4‐aminobenzyl)‐1,2,4‐triazole (abtz) was utilized, one new cadmium(II) coordination polymer, namely [Cd(abtz)I₂]_n ( 1 ) was prepared through the powerful solvo‐thermal synthetic strategy. In compound 1 , the abtz building blocks are interlinked through the central Cd^II ions forming the two‐dimensional (2D) layer coordination framework. Powder X‐ray diffraction (PXRD) characterization also reveals that we have prepared the pure phases of coordination polymer 1 . Optical properties have been determined, which can behave the excellent photo‐luminescent emission of coordination polymer 1 . Photo‐luminescent experiment also reveals that coordination polymer 1 can behave the highly sensitive detection for acetone molecules with high K_sv value (K_sv = 4.12 ×10⁴ L · mol^–1) in the recyclable detection fashion. Additionally, coordination polymer 1 also can behave the highly sensitive detection for pollutant dichromate with excellent quenching efficiency K_sv (K_sv = 2.12 × 10⁴ L · mol^–1) and low detection limit [38 × 10^–3 mM (S/N = 3)]. UV/Vis, photo‐luminescent lifetime, and PXRD patterns also have been determined to analyze the detection mechanism.     

Synthesis and characterization of new soluble thermally stable poly(azomethine‐ether‐imide)s: discerning the possibility for high temperature applications

A new series of polyimides was synthesized by the condensation of monomers (azomethine‐ether diamine, DA‐1 and DA‐2) with pyromelliticdianhydride (PMDA), 3,4,9,10‐perylenetetracarboxylic dianhydride (PD) and 3,3′4,4′‐benzophenonetetracarboxylic dianhydride (BD). The structural explications of monomers and polyimides was conducted by FT‐IR, ¹H NMR and elemental analysis. All polyimides were found soluble in polar aprotic solvents and found to be semicrystalline in nature confirmed by XRD. The inherent viscosities were found in the range of 0.67–0.77 g/dl. %. Average molecular weight (M_W) and number average molecular weight (Mn) of the polyimides were found in the range of 5.72 × 10⁵ g/mol–6.58 × 10⁵ g/mol and 3.79 × 10⁵ g/mol 4.11 × 10⁵ g/mol respectively. The polyimides exhibited excellent thermal properties having a glass transition temperature T_g in the range of 230–290°C and the 10% weight loss temperature was above 450°C. The values of thermodynamic parameters, activation energy, enthalpy and entropy fall in the range of 45.2–53.90 kJ/mol, 43.5–52.30 kJ/mol and 0.217 kJ/mol k to 0.261 kJ/mol k respectively. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and characterization of novel alternating fluorinated copolymers bearing oligo(ethylene oxide) side chains

The synthesis and characterization of novel poly(CTFE‐g‐oligoEO) graft copolymers [chlorotrifluoroethylene (CTFE) and ethylene oxide (EO)] are presented. First, vinyl ether monomers bearing oligo(EO) were prepared by transetherification of ω‐hydroxyoligo(EO) with ethyl vinyl ether catalyzed by a palladium complex in 70–84% yields. Two vinyl ethers of different molecular weights (three and 10 EO units) were thus obtained. Then, radical copolymerization of the above vinyl ethers with CTFE led to alternating poly(CTFE‐alt‐VE) copolymers that bore oligo(OE) side chains in satisfactory yields (65%). These original poly(CTFE‐g‐oligoEO) graft copolymers were characterized by ¹H, ¹⁹F, and ¹³C NMR spectroscopy. Their molecular weights reached 19,000 g mol^?1, and their thermal properties were investigated while their glass transition temperatures ranged between ?42 and ?36 °C. Their thermogravimetric analyses under air showed decomposition temperatures of 270 °C with 10% weight loss (T_d,10%). These novel copolymers are of potential interest as polymer electrolytes in lithium ion batteries, showing room temperature conductivities ranging from 4.49 × 10^?7 to 1.45 × 10^?6 S cm^?1 for unplasticized material. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Neodymium Catalyst for the Polymerization of Dienes and Polar Vinyl Monomers

Ziegler–Natta catalysts have played a major role in industry for the polymerization of dienes and vinyl monomers. However, due to the deactivation of the catalyst, this system fails to polymerize polar vinyl monomers such as vinyl acetate, methyl methacrylate, and methyl acrylate. Herein, a catalytic system composed of NdCl₃⋅3TEP/TIBA is reported, which promotes a quasi‐living polymerization of dienes and is also active for the homopolymerization of polar vinyl monomers. Additionally, this catalytic system generates polymyrcene‐b‐polyisoprene and poly(myrcene)‐b‐poly(methyl methacrylate) diblock copolymers by sequential monomer addition. To encourage the replacement of petroleum‐based polymers by environmentally benign biobased polymers, polymerization of β‐myrcene is demonstrated with a catalytic activity of ≈106 kg polymer mol Nd⁻¹ h⁻¹.     

Ni(II) and Pd(II) complexes bearing benzocyclohexane–ketoarylimine for copolymerization of norbornene with 5‐norbornene‐2‐carboxylic ester

A serial of late transition metal complexes, which bearing Benzocyclohexane–ketoarylimine ligand and named as Mt(benzocyclohexane–ketoarylimino)₂ {Mt(bchkai)₂: Mt=Ni or Pd; bchkai=C₁₀H₈(O)CN(Ar)CH₃; Ar=naphthyl or fluoryl}, have been synthesized and characterized. The molecular structures of the ligands and nickel complex have been confirmed by X‐ray single‐crystal analyses. The nickel complexes exhibited very high activity up to 2.7 × 10⁵ g_polymer/mol_Ni·h and palladium complexes showed high activity up to 2.3 × 10⁵ g_polymer/mol_Pd·h for norbornene (NB) homo‐polymerization with tris(pentafluorophenyl)borane as cocatalyst. The four complexes were effective for copolymerization of NB and 5‐norbornene‐2‐carboxylic acid methyl ester (NB‐COOCH₃) in relatively high activities (0.1–2.4 × 10⁵ g_polymer/mol_Mt·h) and produced the addition‐type copolymers with relatively high molecular weights (0.5 × 10⁵–1.2 × 10⁵ g/mol) as well as narrow molecular weight distributions (PDI < 2 for all polymers). Influences of the metals and comonomer feed content on the polymerization activity as well as on the incorporation rates (20.9–42.6%) were investigated. The achieved NB/NB‐COOCH₃ copolymers were confirmed to be noncrystalline, exhibited good thermal stability (T_d > 400°C) and showed good solubility in common organic solvents. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Regulation of Molecular Weight Characteristics and Microtacticity of Polyhexene Produced over Highly Active Supported Titanium–Magnesium Catalysts

The data on the effect of polymerization temperature of 1‐hexene within the 30–70 °C range in the presence of a highly active supported titanium–magnesium catalyst on molecular weight characteristics and microtacticity of polyhexene, with cocatalyst composition being additionally varied (AlEt₃ or Al(i‐Bu)₃), in the absence and presence of an external stereoregulating electron‐donating compound and hydrogen, are reported. Polymerization conditions, making it possible to specifically regulate molecular weight and molecular weight distribution of polyhexene over a broad range ((M_w = 7 × 10⁴–2.2 × 10⁶ g mol⁻¹; M_w/M_n = 3.7–33) and regulate isotacticity of polyhexene (content of mmmm pentads from 56% to 96%), while retaining high catalyst activity, are determined.     

Micelles with highly branched nanoporous interior: Solution properties and binding capabilities of amphiphilic copolymers with linear dendritic architecture

This article describes the solution behavior of model amphiphilic linear‐dendritic ABA block copolymers that self‐assemble in aqueous media and form micelles with highly branched nanoporous cores. The materials investigated are constructed of poly(ethylene glycol), PEG, with molecular weight 5,000 or 11,000 as the water‐soluble B block and poly(benzyl ether) monodendrons [G] of second and third generation as the hydrophobic A fragments. The process of self‐assembly in aqueous media and the character of the micellar core are investigated by fluorescence spectroscopy using pyrene as the molecular probe. The data obtained by different methods indicate that the critical micelle concentrations (cmc) for these systems are between 1.1 × 10⁻⁵ and 2.0 × 10⁻⁵ mol/L for [G‐2]‐PEG5000‐[G‐2] and between 7.08 × 10⁻⁶ and 7.94 × 10⁻⁶ mol/L for [G‐3]‐PEG11000‐[G‐3]. It is found that the ratio of the first and third vibronic bands (I₁/I₃ ) in the fluorescence spectrum of the encapsulated pyrene changes from 1.77 to 1.32 when the concentration of [G‐2]‐PEG5000‐[G‐2] increases from 1.1 × 10⁻⁶ mol/L to 1.1 × 10⁻⁴ mol/L. For [G‐3]‐PEG11000‐[G‐3] these changes are between 1.77 and 1.17 in the same concentration range. The hybrid copolymers form host‐guest complexes with several polyaromatic compounds (phenanthrene, pyrene, perylene and fullerene, C₆₀) that are stable over extended periods of time (more than 12 months). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2711–2727, 2000     

Ethylene polymerization with long‐lifetime monopendant thienyl‐substituted group 4 metallocenes

A series of group 4 metallocenes (RCp)[Cp―(bridge)―(2‐C₄H₃S)]MCl₂ [M = Ti ( C1 , C2 , C3 , C4 ); M = Zr ( C5 , C6 , C7 , C8 )] bearing a pendant thiophene group on a cyclopentadienyl ring have been synthesized, characterized and tested as catalyst precursors for ethylene polymerization. The molecular structures of representative titanocenes C2 and C4 were confirmed by single‐crystal X‐ray diffraction and revealed that both complexes exist in an expected coordination environment for a monomeric bent metallocene. No intramolecular coordination between the thiophene group and the titanium center could be observed in the solid state. Upon activation by methylaluminoxane (MAO), titanocenes C1 , C2 , C3 , C4 showed moderate catalytic activities and produced high‐ or ultra‐high‐molecular‐weight polyethylene (M_v 70.5–227.1 × 10⁴ g mol^?1). Titanocene C3 is more active and long‐lived, with a lifetime of nearly 9 h at 30 °C. At elevated temperatures of 80–110 °C, zirconocenes C5 , C6 , C7 , C8 displayed high catalytic activities (up to 27.6 × 10⁵ g PE (mol Zr)^?1 h^?1), giving high‐molecular‐weight polyethylene (M_v 11.2–53.7 × 10⁴ g mol^?1). Even at 80 °C, a long lifetime of at least 2 h was observed for the C8/MAO catalyst system. Copyright © 2014 John Wiley & Sons, Ltd.     

Thermochemistry and Kinetics of the Thermal Decomposition of 1‐Chlorohexane

A theoretical kinetic study of the thermal decomposition of 1‐chlorohexane in gas phase between 600 and 1000 K was performed. Transition‐state theory and unimolecular reaction rate theory were combined with molecular information provided by quantum chemical calculations. Particularly, the B3LYP, BMK, M05–2X, and M06–2X formulations of the density functional theory (DFT) and the high‐level ab initio methods G3B3 and G4 were employed. The possible reaction channels for the thermal decomposition of 1‐chlorohexane were investigated, and the reaction takes place through the elimination of HCl with the formation of 1‐hexene. The derived high‐pressure limit rate coefficients are k _∞(600–1000 K) = (8 ± 5) × 10¹³ exp[‐((56.7 ± 0.4) kcal mol⁻¹/RT )] s⁻¹. The pressure effect over the reaction was analyzed from the calculation of the low‐pressure limit rate coefficients and the falloff curves. In addition, the standard enthalpies of formation at 298 K of −46.9 ± 1.5 kcal mol⁻¹ for 1‐chlorohexane and 5.8 ± 1.5 kcal mol⁻¹ for C₆H₁₃ radical were derived from isodesmic and isogiric reactions at high levels of theory.     

Determination of propagation rate coefficients for an α‐substituted acrylic ester: Pulsed laser polymerization of dimethyl itaconate

Pulsed laser polymerization experiments have been performed on the bulk polymerization of dimethyl itaconate over the temperature range 20–50 °C. The activation energy and frequency factor were calculated as 24.9 kJ/mol⁻¹ and 2.15 × 10⁵ L/mol⁻¹s⁻¹, respectively. The activation energy is comparable with the methacrylate series of monomers. The frequency factor is relatively small and reflects steric hindrance in the transition state caused by the bulky 1,1, disubstitution in the monomer (and consequently the radical). The Mark–Houwink–Kuhn–Sakurada constants were also determined for poly(dimethyl itaconate) in tetrahydrofuran, these are reported as 46 × 10⁻⁵ dL/g (K) and 0.51 (α). The influence of penultimate units (γ‐substituents) on homopropagation reactions is discussed particularly for polymerizations leading to significant 1,3 interactions in the resultant polymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2192–2200, 2000     

Determination of Astaxanthin and Canthaxanthin Triplet Properties in Different Polarities of the Solvent by Laser Flash Photolysis

Triplet‐triplet extinction coefficients for astaxanthin ( I ) and canthaxanthin ( II ) in different deaerated polarity solutions of MeCN and benzene were evaluated by laser flash photolysis at 298 K in the spectral region from 350 to 650 nm by energy transfer method, employing 2‐acetonaphthone as sensitizer. The triplet‐triplet extinction coefficients in MeCN and benzene were different in terms of the carotenoid present. The maximum triplet‐triplet extinction coefficient was 0.1–1.7×10⁵ L·mol⁻¹·cm⁻¹ in different solvents. The rate constants of triplet decay were I : 1.25×10¹⁰ L·mol⁻¹·s⁻¹, II : 1.12×10¹⁰ L·mol⁻¹·s⁻¹ in MeCN; and I : 1.75×10¹⁰ L·mol⁻¹·cm⁻¹, II : 3.27×10¹⁰ L·mol⁻¹·s⁻¹ in benzene. The bimolecular rate constants of energy transfer from triplet excited 2‐acetonaphthone to carotenoids were determined from the linear regression of the decay rate constant of 2‐acetonaphthone triplet at varying carotenoid concentrations. The triplet lifetimes of ³AST* and ³CAN* in different solvents were also determined. The results indicated that triplet energy transfer was nearly diffusion‐controlled.     

Shock tube study of monomethylamine thermal decomposition and NH2 high temperature absorption coefficient

CH₃NH₂ thermal decomposition is shown to provide a suitable NH₂ radical source for spectroscopic and kinetic shock tube studies. Using this precursor, the absorption coefficient of the NH₂ radical at a detection wavelength of 16739.90 cm⁻¹ has been determined. In the temperature range 1600–2000K the low‐pressure absorption coefficient is described by the polynominal equation: k_NH2=3.953×10¹⁰/T ³+7.295×10⁵/T ²−1.549×10³/T [atm⁻¹ cm⁻¹] The uncertainty of the determined absorption coefficient is estimated to be ±10%. The rate of the thermal decomposition reaction CH₃NH₂+M → CH₃+NH₂+M is determined over the temperature range 1550–1900 K and at pressures near 1.6 atm. The rate coefficient was found to be: k₁=2.51×10¹⁶ exp(−28430/T) [cm³ mol⁻¹ s⁻¹] The uncertainty of the determined rate coefficients is estimated to be ±20%. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 323–330, 1999     

Measurements of the kinetics of the OH‐initiated oxidation of isoprene: Radical propagation in the OH + isoprene + O2 + NO reaction system

The mechanism of the OH‐initiated oxidation of isoprene in the presence of NO and O₂ has been investigated using a discharge‐flow system at 298 K and 2 torr total pressure. OH radical concentration profiles were measured using laser‐induced fluorescence as a function of reaction time. The rate constant for the reaction of OH + isoprene was measured to be (1.10 ± 0.05) × 10⁻¹⁰ cm³ mol⁻¹ s⁻¹. In the presence of NO and O₂, regeneration of OH radicals by the reaction of isoprene‐based peroxy radicals with NO was measured and compared to simulations of the kinetics of this system. The results of these experiments are consistent with an overall rate constant of 9 × 10⁻¹² cm³ mol⁻¹ mol⁻¹ (with an uncertainty factor of 2) for the reaction of isoprene‐based hydroxyalkyl peroxy radicals with NO. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 637–643, 1999     

Polyurethane elastomers based on amphiphilic poly(caprolactone)‐b‐poly(butadiene)‐b‐poly(caprolactone) triblockcopolyols

Hydroxyl‐terminated poly(butadiene) (HTPB; M_n = 2100 g mol⁻¹) was capped with 30 and 60 wt % of ɛ‐caprolactone to reach amphiphilic triblock copolymers in form of capped poly(butadiene) CPB. The former (CPB30; M_n = 3300 g/mol) is amorphous with a glass temperature of −56 °C. CPB60 (M_n = 4000 g mol⁻¹) is semi‐crystalline with a melting point of 50 °C and a glass transition at −47 °C. The CPBs, HTPB and polycaprolactone diol (M_n = 2000 g mol⁻¹) were used as soft segment components in the preparation of polyurethane elastomers (PUE), using a 1/1 mixture of an MDI prepolymer and uretonimine modified MDI, and hard phase components in form of 1,3‐propane diol, 1,4‐butane diol, and 1,5‐pentane diol. CPB‐based elastomers with 1,4 butane diol (8 wt %) show hard domains as fringed aggregates with a better connection to the continuous phase than the HTPB‐based PUE. The soft segment glass transition temperature (T_g) is at −28 °C for HTPB‐based PUE and at −43 °C for those of CPB. The tensile strength of the CPB30&60‐based PUE is found between 20 and 30 MPa at an elongation at break of 400% and 550%, respectively. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1162–1172     

Ag(I)‐Catalyzed Chlorination of Linezolid during Water Treatment: Kinetics and Mechanism

The kinetic and mechanistic study of Ag(I)‐catalyzed chlorination of linezolid (LNZ) by free available chlorine (FAC) was investigated at environmentally relevant pH 4.0–9.0. Apparent second‐order rate constants decreased with an increase in pH of the reaction mixture. The apparent second‐order rate constant for uncatalyzed reaction, e.g., k″_app = 8.15 dm³ mol⁻¹ s⁻¹ at pH 4.0 and k″_app. = 0.076 dm³ mol⁻¹ s⁻¹ at pH 9.0 and 25 ± 0.2°C and for Ag(I) catalyzed reaction total apparent second‐order rate constant, e.g., k″_app = 51.50 dm³ mol⁻¹ s⁻¹ at pH 4.0 and k″_app. = 1.03 dm³ mol⁻¹ s⁻¹ at pH 9.0 and 25 ± 0.2°C. The Ag(I) catalyst accelerates the reaction of LNZ with FAC by 10‐fold. A mechanism involving electrophilic halogenation has been proposed based on the kinetic data and LC/ESI/MS spectra. The influence of temperature on the rate of reaction was studied; the rate constants were found to increase with an increase in temperature. The thermodynamic activation parameters E_a, ΔH^#, ΔS^#, and ΔG^# were evaluated for the reaction and discussed. The influence of catalyst, initially added product, dielectric constant, and ionic strength on the rate of reaction was also investigated. The monochlorinated substituted product along with degraded one was formed by the reaction of LNZ with FAC.     

Flexibilized styrene‐N‐substituted maleimide copolymers. I. Multiblock copolymers prepared from styrene‐maleimide telechelics and polytetrahydrofuran

Telechelic copolymers of styrene and different N‐substituted‐maleimides (SMIs) with a molecular weight of 2000–8000 g/mol were synthesized using the starved‐feed‐reactor technique and were nearly bifunctional when the monomer feed had a high styrene concentration. The COOH‐terminated rigid SMI blocks were polycondensated with OH‐terminated poly(tetrahydrofuran) (PTHF) blocks, with a molecular weight of 250–1000 g/mol, which are the flexible parts in the generated homogeneous multiblock copolymer. The entanglement density, which is closely related to the toughness of materials, increased in these flexible SMI copolymers (ν_e = 5.2 · 10²⁵ m⁻³) compared to the unflexibilized ones (ν_e = 2.4 · 10²⁵ m⁻³). The glass transition temperature of these flexibilized, single‐phase multiblock copolymers was still high enough to qualify them as engineering plastics. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3550–3557, 2000     

Pd(II) complexes bearing di‐ and monochelate fluorinated β‐ketonaphthyliminato ligand and their catalytic properties towards vinyl‐addition polymerization and copolymerization of norbornene and ester‐functionalized norbornene derivative

Fluorinated β‐ketonaphthyliminate ligand CF₃C(O)CHC[HN(naphthyl)]CH₃ ( L1 ) and Pd(II) complexes with dichelate fluorinated β‐ketonaphthyliminato ligand, {CF₃C(O)CHC[N(naphthyl)]CH₃}₂Pd ( C1 ), as well as with monochelate fluorinated β‐ketonaphthyliminato ligand, {CF₃C(O)CHC[N(naphthyl)]CH₃}Pd(CH₃)(PPh₃) ( C2 ), were synthesized and their solid‐state structures were confirmed using X‐ray crystallographic analysis. The Pd(II) complexes were employed as precursors to catalyze norbornene (NB) homo‐ and copolymerization with ester‐functionalized NB derivative using B(C₆F₅)₃ as a co‐catalyst. High activity up to 2.3 × 10⁵ g_polymer mol_Pd^?1 h^?1 for the C1 /B(C₆F₅)₃ system and 3.4 × 10⁶ g_polymer mol_Pd^?1 h^?1 for the C2 /B(C₆F₅)₃ system was exhibited in NB homopolymerization. Moreover, the Pd(II) complexes exhibited a high level of tolerance towards the ester‐functionalized MB monomer. In comparison with the C1 /B(C₆F₅)₃ system, the C2 /B(C₆F₅)₃ system exhibited better catalytic property towards the copolymerization of NB with 5‐norbornene‐2‐carboxylic acid methyl ester (NB‐COOCH₃), and soluble vinyl‐addition‐type copolymers were obtained with relatively high molecular weights (3.6 × 10⁴–7.5 × 10⁴ g mol^?1) as well as narrow molecular weight distributions (1.49–2.15) depending on the variation of monomer feed ratios. The NB‐COOCH₃ insertion ratio in all copolymers could be controlled in the range 2.8–21.0 mol% by tuning a content of 10–50 mol% NB‐COOCH₃ in the monomer feed ratios. Copolymerization kinetics were expressed by the NB and NB‐COOCH₃ monomer reactivity ratios: r_NB‐COOCH3 = 0.18, r_NB = 1.28 were determined for the C1 /B(C₆F₅)₃ system and r_NB‐COOCH3 = 0.19, r_NB = 3.57 for the C2 /B(C₆F₅)₃ system using the Kelen–Tüdõs method. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and Characterization of Sulfonated Polyimides Containing Trifluoromethyl Groups as Proton Exchange Membranes

A novel sulfonated diamine, 4,4′‐bis(4‐amino‐3‐trifluoromethylphenoxy) biphenyl 3,3′‐disulfonic acid (F‐BAPBDS), was successfully synthesized by nucleophilic aromatic substitution of 4,4′‐dihydroxybiphenyl with 2‐chloro‐5‐nitrobenzotrifluoride, followed by reduction and sulfonation. A series of sulfonated polyimides of high molecular weight (SPI‐x, x represents the molar percentage of the sulfonated monomer) were prepared by copolymerization of 1,4,5,8‐naphathlenetetracarboxylic dianhydride (NTDA) with F‐BAPBDS and nonsulfonated diamine. Flexible and tough membranes of high mechanical strength were obtained by solution casting and the electrolyte properties of the polymers were intensively investigated. The copolymer membranes exhibited excellent oxidative stability due to the introducing of the CF₃ groups. The SPI membranes displayed desirable proton conductivity (0.52×10⁻¹–0.97×10⁻¹ S·cm⁻¹) and low methanol permeability (less than 2.8×10⁻⁷ cm²·s⁻¹). The highest proton conductivity (1.89×10⁻¹ S·cm⁻¹) was obtained for the SPI‐90 membrane at 80°C, with an IEC of 2.12 mequiv/g. This value is higher than that of Nafion 117 (1.7×10⁻¹ S·cm⁻¹). Furthermore, the hydrolytic stability of the obtained SPIs is better than the BDSA and ODADS based SPIs due to the hydrophobic CF₃ groups which protect the imide ring from being attacked by water molecules, in spite of its strong electron‐withdrawing behaviors.