High-Molecular-Weight Polynucleotides by Transferase-Catalyzed Living Chain-Growth Polycondensation

We present terminal deoxynucleotidyl transferase-catalyzed enzymatic polymerization (TcEP) for the template-free synthesis of high-molecular-weight, single-stranded DNA (ssDNA) and demonstrate that it proceeds by a living chain-growth polycondensation mechanism. We show that the molecular weight of the reaction products is nearly monodisperse, and can be manipulated by the feed ratio of nucleotide (monomer) to oligonucleotide (initiator), as typically observed for living polymerization reactions. Understanding the synthesis mechanism and the reaction kinetics enables the rational, template-free synthesis of ssDNA that can be used for a range of biomedical and nanotechnology applications.     

One‐pot synthesis of surface‐functionalized molecularly imprinted polymer microspheres by iniferter‐induced “living” radical precipitation polymerization

This article describes for the first time the development of a new polymerization technique by introducing iniferter‐induced “living” radical polymerization mechanism into precipitation polymerization and its application in the molecular imprinting field. The resulting iniferter‐induced “living” radical precipitation polymerization (ILRPP) has proven to be an effective approach for generating not only narrow disperse poly(ethylene glycol dimethacrylate) microspheres but also molecularly imprinted polymer (MIP) microspheres with obvious molecular imprinting effects towards the template (a herbicide 2,4‐dichlorophenoxyacetic acid (2,4‐D)), rather fast template rebinding kinetics, and appreciable selectivity over structurally related compounds. The binding association constant K_a and apparent maximum number N_max for the high‐affinity sites of the 2,4‐D imprinted polymer were determined by Scatchard analysis and found to be 1.18 × 10⁴ M^?1 and 4.37 μmol/g, respectively. In addition, the general applicability of ILRPP in molecular imprinting was also confirmed by the successful preparation of MIP microspheres with another template (2‐chloromandelic acid). In particular, the living nature of ILRPP makes it highly useful for the facile one‐pot synthesis of functional polymer/MIP microspheres with surface‐bound iniferter groups, which allows their direct controlled surface modification via surface‐initiated iniferter polymerization and is thus of great potential in preparing advanced polymer/MIP materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3217–3228, 2010     

Synthesis of well‐defined comb‐like graft (co)polymers by nucleophilic substitution reaction between living polymers and polyhalohydrocarbon

A series of graft (co)polymers were synthesized by nucleophilic substitution reaction between iodinated 1,2‐polybutadiene (PB‐I, backbone) and living polymer lithium (side chains). The coupling reaction between PB‐I and living polymers can finish within minutes at room temperature, and high conversion (up to 92%) could be obtained by effectively avoiding side reaction of dimerization when living polymers were capped with 1,1‐diphenylethylene. By virtue of living anionic polymerization, backbone length, side chain length, and side chain composition, as well as graft density, were well controlled. Tunable molecular weight of graft (co)polymers with narrow molecular weight distribution can be obtained by changing either the lengths of side chain and backbone, or the graft density. Graft copolymers could also be synthesized with side chains of multicomponent polymers, such as block polymer (polystyrene‐b‐polybutadiene) and even mixed polymers (polystyrene and polybutadiene) as hetero chains. Thus, based on living anionic polymerization, this work provides a facile way for modular synthesis of graft (co)polymers via nucleophilic substitution reaction between living polymers and polyhalohydrocarbon (PB‐I). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Photoinduced controlled/living free‐radical polymerization of 4‐methacryloyl‐1,2,2,6,6‐pentamethyl‐piperidenyl

The photoinduced solution polymerization of 4‐methacryloyl‐1,2,2,6,6‐pentamethyl‐piperidinyl (MPMP), used as a reactive hindered amine piperidinol derivative, was performed. The obtained MPMP homopolymer had a very narrow molecular weight distribution (1.06–1.39) according to gel permeation chromatography. The number‐average and weight‐average molecular weights increased linearly with the monomer conversion, this being characteristic of controlled/living free‐radical polymerizations. Electron spin resonance signals were detected in the MPMP homopolymer and in a polymer mixture solution, and they were assigned to nitroxide radicals, which were bound to the polymer chains and persisted at a level of 10^?9 mol/L during the polymerization. Instead of the addition of mediated nitroxide radicals such as 2,2,6,6‐tetramethyl‐piperidinyl‐1‐oxy (TEMPO), those radicals (>N? O ·) were formed in situ during the photopolymerization of MPMP, and so the reaction mechanism was understood as being similar to that of TEMPO‐mediated controlled/living free‐radical polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2659–2665, 2004     

Electrospray‐Ionization Mass Spectrometry for Screening the Specificity and Stability of Single‐Stranded‐DNA Templated Self‐Assemblies

Supramolecular complexes consisting of a single‐stranded oligothymine ( dTn ) as the host template and an array of guest molecules equipped with a complementary diaminotriazine hydrogen‐bonding unit have been studied with electrospray‐ionization mass spectrometry (ESI‐MS). In this hybrid construct, a supramolecular stack of guest molecules is hydrogen bonded to dTn . By changing the hydrogen‐bonding motif of the DNA host template or the guest molecules, selective hydrogen bonding was proven. We were able to detect single‐stranded‐DNA (ssDNA)–guest complexes for strands with lengths of up to 20 bases, in which the highest complex mass detected was 15 kDa; these complexes constitute 20‐component self‐assembled objects. Gas‐phase breakdown experiments on single‐ and multiple‐guest–DNA assemblies gave qualitative information on the fragmentation pathways and the relative complex stabilities. We found that the guest molecules are removed from the template one by one in a highly controlled way. The stabilities of the complexes depend mainly on the molecular weight of the guest molecules, a fact suggesting that the complexes collapse in the gas phase. By mixing two different guests with the ssDNA template, a multicomponent dynamic library can be created. Our results demonstrate that ESI‐MS is a powerful tool to analyze supramolecular ssDNA complexes in great detail.     

Monte Carlo simulation on rate enhancement of nitroxide‐mediated living free‐radical polymerization

Four rate enhancing cases of nitroxide‐mediated living free‐radical polymerizations are simulated by the Monte Carlo method to investigate the effects of parameters on kinetics and molecular weight distribution of the resulting polymers. In all cases the equilibrium between growing and dormant chains shifts in favor of the growing chains under corresponding reaction conditions. The polymerization rates are therefore increased substantially without much loss in control of molecular weight and distribution of the products. The optimization of rate‐enhancement in living free‐radical polymerization is also discussed.     

Controlled Bimodal Molecular‐Weight‐Distribution Polymers: Facile Synthesis by RAFT Polymerization

The RAFT agents RAFT‐1 and RAFT‐2 were used for RAFT polymerization to synthesize well‐defined bimodal molecular‐weight‐distribution (MWD) polymers. The system showed excellent controllability and “living” characteristics toward both the higher‐ and lower‐molecular‐weight fractions. It is important that bimodal higher‐molecular‐weight (HMW) polymers and block copolymers with both well‐controlled molecular weight (MW) and MWD could be prepared easily due to the “living” features of RAFT polymerization. The strategy realized a mixture of higher/lower‐molecular‐weight polymers at the molecular level but also preserved the features of living radical polymerization (LRP) of the RAFT polymerization.     

Cu powder‐catalyzed single electron transfer‐living radical polymerization of acrylonitrile

Single electron transfer‐living radical polymerization (SET‐LRP) has been used as a new technique for the synthesis of polyacrylonitrile (PAN) catalyzed by Cu(0) powder with carbon tetrachloride (CCl₄) as the initiator and hexamethylenetetramine (HMTA) as the ligand in N,N‐dimethylformamide (DMF) or mixed solvent. Well‐controlled polymerization has been achieved as evidenced by a linear increase of molecular weight with respect to monomer conversion as well as narrow molecular weight distribution. Kinetics data of the polymerizations at both ambient temperature and elevated temperature demonstrate living/controlled feature. An increase in the concentration of ligand yields a higher monomer conversion within the same time frame and almost no polymerization occurs in the absence of ligand due to the poor disproportionation reaction of Cu(I). The reaction rate exhibits an increase with the increase of the amount of catalyst Cu(0)/HMTA. Better control on the molecular weight distribution has been produced with the addition of CuCl₂. In the presence of more polar solvent water, it is observed that there is a rapid increase in the polymerization rate. The effect of initiator on the polymerization is also preliminarily investigated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Facile and Versatile Synthesis of End‐Functionalized Poly(phenylacetylene)s: A Multicomponent Catalytic System for Well‐Controlled Living Polymerization of Phenylacetylenes

A rhodium‐based multicomponent catalytic system for well‐controlled living polymerization of phenylacetylenes has been developed. The catalytic system is composed of readily available and bench‐stable [Rh(nbd)Cl]₂, aryl boronic acid derivatives, diphenylacetylene, 50 % aqueous KOH, and PPh₃. This system offers a method for the facile and versatile synthesis of various end‐functionalized cis‐stereoregular poly(phenylacetylene)s because components from aryl boronic acids and diphenylacetylene were introduced to the initiating end of the polymers. The polymerization reaction shows a typical living nature with a high initiation efficiency, and the molecular weight of the resulting poly(phenylacetylene)s can be readily controlled with very narrow molecular‐weight distributions (M_w/M_n=1.02–1.09). The experimental results suggest that the present catalytic system has a higher polymerization activity than the polymerization activities of other rhodium‐based catalytic systems previously reported.     

Microwave‐assisted suzuki coupling reaction for rapid synthesis of conjugated polymer–poly(9,9‐dihexylfluorene)s as an example

Long reaction period (dozens of hours) is often required for the synthesis of conjugated polymers by palladium‐catalyzed Suzuki polymerization reaction. This work shows that microwave can accelerate Suzuki polymerization to realize the ultra‐rapid synthesis of conjugated polymers, here poly(9,9‐dihexylfluorene)s (PDHFs) as an example. The effects of reaction conditions on the polymerization have been systematically investigated, including the mode of microwave irradiation, microwave power, reaction temperature, reaction time, solvents, catalyst species, and catalyst concentrations. Compared with the conventional heating method (oil bath) for the synthesis of PDHFs (48 h, M_w = 20,000 g/mol), Suzuki polymerization under optimized microwave condition can yield PDHFs with higher molecular weight (M_w = 40,000 g/mol) in a much shorter time (14 min). The structures of obtained PDHFs samples are fully characterized spectroscopically, demonstrating well‐defined PDHFs have been prepared through microwave‐assisted (MA) Suzuki polymerization reaction. In addition, the mechanism of MA Suzuki polymerization is proposed preliminarily. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Ligand‐free SET‐DTLRP of MMA at room temperature

An iodine‐based initiator, 2‐iodo‐2‐methylpropionitrile (CPI), was utilized for the single‐electron transfer and degenerative chain transfer mediated living radical polymerization (SET‐DTLRP) of methyl methacrylate (MMA) in the absence of ligand, at ambient temperature. The CPI‐initiated ligand‐free polymerizations manifested reasonable control over molecular weights with relatively narrow distributions (M_w/M_n ≤ 1.35). The living nature of the polymers was further confirmed by successful chain extension reaction and ¹H NMR with high chain‐end fidelity (～96%). Screening of the available solvents suggested that the controllability of this polymerization was highly dependent on the kind of solvents, wherein dimethyl sulfoxide was a better solvent for a controlled molecular weight. The proposed ligand‐free SET‐DTLRP initiated by CPI was intriguing since it would dramatically decrease the concentration of Cu(0) ions both in polymerization system and resultant polymer, and provided a more economical and eco‐friendly reversible‐deactivation radical polymerization technique. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of PMMA‐b‐PBA block copolymer in homogeneous and miniemulsion systems by DPE controlled radical polymerization

In this research, poly(methyl methacrylate)‐b‐poly(butyl acrylate) (PMMA‐b‐PBA) block copolymers were prepared by 1,1‐diphenylethene (DPE) controlled radical polymerization in homogeneous and miniemulsion systems. First, monomer methyl methacrylate (MMA), initiator 2,2′‐azobisisobutyronitrile (AIBN) and a control agent DPE were bulk polymerized to form the DPE‐containing PMMA macroinitiator. Then the DPE‐containing PMMA was heated in the presence of a second monomer BA, the block copolymer was synthesized successfully. The effects of solvent and polymerization methods (homogeneous polymerization or miniemulsion polymerization) on the reaction rate, controlled living character, molecular weight (M_n) and molecular weight distribution (PDI) of polymers throughout the polymerization were studied and discussed. The results showed that, increasing the amounts of solvent reduced the reaction rate and viscosity of the polymerization system. It allowed more activation–deactivation cycles to occur at a given conversion thus better controlled living character and narrower molecular weight distribution of polymers were demonstrated throughout the polymerization. Furthermore, the polymerization carried out in miniemulsion system exhibited higher reaction rate and better controlled living character than those in homogeneous system. It was attributed to the compartmentalization of growing radicals and the enhanced deactivation reaction of DPE controlled radical polymerization in miniemulsified droplets. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4435–4445, 2009     

Controlled metal‐free polymerization toward well‐defined thermoresponsive polypeptides by polymerization at low temperature

A controlled metal‐free synthetic methodology toward well‐defined thermoresponsive polypeptides by decreasing the reaction temperature to 0 °C has been developed. Good control over the molecular weight in the polymerization of a trithiocarbonate‐functionalized N‐carboxyanhydride (MES‐l ‐Glu‐NCA) monomer was obtained using n‐hexylamine as the initiator at 0 °C. It yielded homopolypeptide macro‐transfer agent (PMESLG) with narrow molecular weight distribution (PDI < 1.3) and controllable chain length. Detailed ¹H NMR and MALDI‐TOF‐MS analysis clearly confirmed that frequently occurring side‐reactions was absent at 0 °C, and the polymerization was controlled. The resultant PMESLG was applied to mediate the reversible addition‐fragmentation chain transfer (RAFT) polymerization of oligo‐ethylene‐glycol acrylate (OEGA) for the metal‐free synthesis of thermoresponsive polypeptides. These thermoresponsive polypeptides have well‐controlled molecular weight, adopted regular α‐helical conformation, and exhibited a lower critical solution temperature between 23 °C and 55 °C. To the best of our knowledge, there are very few reports about the synthesis of well‐defined thermoresponsive graft polypeptides via NCA polymerization and RAFT. Consequently, this provides a new strategy for the synthesis of promising intelligent material for future biomedical applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2618–2624     

Chain‐Growth Click Polymerization of AB2 Monomers for the Formation of Hyperbranched Polymers with Low Polydispersities in a One‐Pot Process

Hyperbranched polymers are important soft nanomaterials but robust synthetic methods with which the polymer structures can be easily controlled have rarely been reported. For the first time, we present a one‐pot one‐batch synthesis of polytriazole‐based hyperbranched polymers with both low polydispersity and a high degree of branching (DB) using a copper‐catalyzed azide–alkyne cycloaddition (CuAAC) polymerization. The use of a trifunctional AB₂ monomer that contains one alkyne and two azide groups ensures that all Cu catalysts are bound to polytriazole polymers at low monomer conversion. Subsequent CuAAC polymerization displayed the features of a “living” chain‐growth mechanism with a linear increase in molecular weight with conversion and clean chain extension for repeated monomer additions. Furthermore, the triazole group in a linear (L) monomer unit complexed Cu^I, which catalyzed a faster reaction of the second azide group to quickly convert the L unit into a dendritic unit, producing hyperbranched polymers with DB=0.83.     

Fluorocarbon‐ended polymers: Metal catalyzed radical and living radical polymerizations initiated by perfluoroalkylsulfonyl halides

Perfluoroalkylsulfonyl chlorides and bromides initiate metal catalyzed free radical polymerization of both hydrocarbon and fluorocarbon monomers affording polymers with perfluoroalkyl end groups. In the case of styrene (S) and methyl methacrylate (MMA) with Cu‐based catalysts the process affords polymers with a relatively narrow molecular weight distribution and linear dependence of molecular weight on conversion, suggesting that a living radical polymerization mechanism occurs. The orders of reaction in monomer, initiator and catalyst for these polymerizations were determined. In the case of PMMA, the detailed structure of a perfluorobutane chain‐end was determined by NMR analysis. Perfluoroalkylsulfonyl chlorides are stable in neutral aqueous media. This permits their use as initators for fluoroolefin polymerizations in H₂O. Poly(tetrafluoroethylene‐co‐hexafluoropropylene) was obtained in good yield with few ionic end groups. The aqueous fluoroolefin polymerization appears to be catalyzed by metal zero species from the reactor walls. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3313–3335, 2000     

Synthesis of lipo‐glycopolymer amphiphiles by nitroxide‐mediated living free‐radical polymerization

The nitroxide‐mediated living free‐radical polymerization of 1,2,5,6‐di(isopropylidene)‐D ‐glucose‐2‐propenoate was achieved in dimethylformamide at 105 °C with an α‐hydrido alkoxyamine initiator functionalized with a lipophilic N,N‐di(octadecyl)amine group. The kinetics of the polymerization were investigated, and the mechanism was shown to be a living process allowing, after hydrolysis, controlled molecular weight, low‐polydispersity lipo‐glycopolymers to be prepared. The amphiphilic character of the macromolecule could be altered by either the exchange of the alkoxyamine at the chain end with hydrogen or the preparation of copolymers with lipophilic monomers such as N,N‐di(octadecyl)acrylamide. The surface and membrane‐forming properties of these novel lipopolymers demonstrate their amphiphilic character. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3379–3391, 2002     

Solvent‐free ring‐opening polymerization of cyclohexene oxide catalyzed by palladium chloride

In this study, we have for the first time demonstrated that palladium chloride (PdCl₂) is an efficient catalyst for ring‐opening polymerization of cyclohexene oxide in a solvent‐free condition. The polymerization product was in atactic structure, and reaction conditions, such as reaction temperature, time, and catalyst amount, showed effects on polymerization conversion yield, turnover number, and number‐average molecular weight of the resulting poly(cyclohexene oxide). PdCl₂ catalysis follows a cationic ring‐opening mechanism. The polymerization result is highly determined by the chemical structure of the monomers.     

Some novel accelerating agents for nitroxide‐mediated living free‐radical polymerization

Malononitrile (MN), trifluoroacetic acid anhydride, acetylacetone, acetoacetic ester, and diethyl malonate have been identified as novel rate‐accelerating additives for nitroxide‐mediated living free‐radical polymerization. Among these additives, MN has the greatest accelerating effect. Adding MN at an MN/2,2,6,6‐tetramethylpiperidine‐oxyl (TEMPO) molar ratio of 4.0 results in a nearly 20 times higher rate of polymerization of styrene (St), and adding MN at an MN/TEMPO molar ratio of 2.5 results in a nearly 15 times higher rate of copolymerization of St and methyl methacrylate. The polymerization of St proceeds in a living fashion, as indicated by the increase in the molecular weight with time and conversion and the relatively low polydispersity. The polymerization rate of St is so quick that the conversion reaches 70% within 1 h at 125 °C when the molar ratio of MN to TEMPO is 4:1. Moreover, the reaction temperature can be reduced to 110 °C. A possible explanation for this effect is that the formation of hydrogen bonds between the MN and TEMPO moiety weakens the C? ON bond at the end of the polymer chain. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5246–5256, 2005     

Copper(0)‐mediated living radical polymerization of acrylonitrile: SET‐LRP or AGET‐ATRP

Cu(0)‐mediated living radical polymerization was first extended to acrylonitrile (AN) to synthesize polyacrylonitrile with a high molecular weight and a low polydispersity index. This was achieved by using Cu(0)/hexamethylated tris(2‐aminoethyl)amine (Me₆‐TREN) as the catalyst, 2‐bromopropionitrile as the initiator, and dimethyl sulfoxide (DMSO) as the solvent. The reaction was performed under mild reaction conditions at ambient temperature and thus biradical termination reaction was low. The rapid and extensive disproportionation of Cu(I)Br/Me₆‐TREN in DMSO/AN supports a mechanism consistent with a single electron transfer‐living radical polymerization (SET‐LRP) rather than activators generated by electron transfer atom transfer radical polymerization (AGET ATRP). ¹H NMR analysis and chain extension experiment confirm the high chain‐end functionality of the resultant polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Light‐Regulated Polymerization under Near‐Infrared/Far‐Red Irradiation Catalyzed by Bacteriochlorophyll a

Photoregulated polymerizations are typically conducted using high‐energy (UV and blue) light, which may lead to undesired side reactions. Furthermore, as the penetration of visible light is rather limited, the range of applications with such wavelengths is likewise limited. We herein report the first living radical polymerization that can be activated and deactivated by irradiation with near‐infrared (NIR) and far‐red light. Bacteriochlorophyll a (Bachl a) was employed as a photoredox catalyst for photoinduced electron transfer/reversible addition–fragmentation chain transfer (PET‐RAFT) polymerization. Well‐defined polymers were thus synthesized within a few hours under NIR (λ=850 nm) and far‐red (λ=780 nm) irradiation with excellent control over the molecular weight (M_n/M_w<1.25). Taking advantage of the good penetration of NIR light, we showed that the polymerization also proceeded smoothly when a translucent barrier was placed between light source and reaction vessel.