M−O Bonding Beyond the Oxo Wall: Spectroscopy and Reactivity of Cobalt(III)‐Oxyl and Cobalt(III)‐Oxo Complexes

Terminal oxo complexes of late transition metals are frequently proposed reactive intermediates. However, they are scarcely known beyond Group 8. Using mass spectrometry, we prepared and characterized two such complexes: [(N4Py)Co^III(O)]⁺ ( 1 ) and [(N4Py)Co^IV(O)]²⁺ ( 2 ). Infrared photodissociation spectroscopy revealed that the Co?O bond in 1 is rather strong, in accordance with its lack of chemical reactivity. On the contrary, 2 has a very weak Co?O bond characterized by a stretching frequency of ≤659 cm^?1. Accordingly, 2 can abstract hydrogen atoms from non‐activated secondary alkanes. Previously, this reactivity has only been observed in the gas phase for small, coordinatively unsaturated metal complexes. Multireference ab‐initio calculations suggest that 2 , formally a cobalt(IV)‐oxo complex, is best described as cobalt(III)‐oxyl. Our results provide important data on changes to metal‐oxo bonding behind the oxo wall and show that cobalt‐oxo complexes are promising targets for developing highly active C?H oxidation catalysts.     

Disproportionation Equilibrium of a μ‐Oxodiiron(III) Complex Giving Rise to C−H Activation Reactivity: Structural Snapshot of a Unique Oxoiron(IV) Adduct

μ‐Oxodiiron(III) species are air‐stable and unreactive products of autoxidation processes of monomeric heme and non‐heme iron(II) complexes. Now, the organometallic [(L^NHC)Fe^III‐(μ‐O)‐Fe^III(L^NHC)]⁴⁺ complex 1 (L^NHC is a macrocyclic tetracarbene) is shown to be reactive in C?H activation without addition of further oxidants. Studying the oxidation of dihydroanthracene, it was found that 1 thermally disproportionates in MeCN solution into its oxoiron(IV) ( 2 ) and iron(II) components; the former is the active species in the observed oxidation processes. Possible cleavage scenarios for 1 are shown by scrambling experiments and structural characterization of an unprecedented adduct of 1 and oxoiron(IV) complex 2 . Kinetic analysis gave an equilibrium constant for the disproportionation of 1 , which is very small (K_eq=7.5±2.5×10^?8 m ). Increasing K_eq might by a useful strategy for circumventing the formation of dead‐end μ‐oxodiiron(III) products during Fe‐based homogeneous oxidation catalysis.     

Manganese(I)‐Catalyzed Regio‐ and Stereoselective 1,2‐Diheteroarylation of Allenes: Combination of C−H Activation and Smiles Rearrangement

Heteroarenes are important structural motif in functional molecules. A Mn^I‐catalyzed 1,2‐diheteroarylation of allenes via a C−H activation/Smiles rearrangement cascade is presented. The reaction occurred under additive‐free or even solvent‐free conditions, which allowed the creation of two C−C and one C−N bonds in a single operation. A series of structurally diverse bicyclic or tricyclic compounds bearing an exocyclic double bond were constructed in good to excellent efficiency. The decarboxylative ring‐opening of the products led to the facile synthesis of vicinal biheteroaryls. Synthetic applications were demonstrated and preliminary mechanistic studies were conducted.     

A High‐Valent Non‐Heme μ‐Oxo Manganese(IV) Dimer Generated from a Thiolate‐Bound Manganese(II) Complex and Dioxygen

This study deals with the unprecedented reactivity of dinuclear non‐heme Mn^II–thiolate complexes with O₂, which dependent on the protonation state of the initial Mn^II dimer selectively generates either a di‐μ‐oxo or μ‐oxo‐μ‐hydroxo Mn^IV complex. Both dimers have been characterized by different techniques including single‐crystal X‐ray diffraction and mass spectrometry. Oxygenation reactions carried out with labeled ¹⁸O₂ unambiguously show that the oxygen atoms present in the Mn^IV dimers originate from O₂. Based on experimental observations and DFT calculations, evidence is provided that these Mn^IV species comproportionate with a Mn^II precursor to yield μ‐oxo and/or μ‐hydroxo Mn^III dimers. Our work highlights the delicate balance of reaction conditions to control the synthesis of non‐heme high‐valent μ‐oxo and μ‐hydroxo Mn species from Mn^II precursors and O₂.     

Methylenecyclopropane Annulation by Manganese(I)‐Catalyzed Stereoselective C−H/C−C Activation

C−H/C−C functionalizations with methylenecyclopropanes (MCPs) were accomplished with a versatile base‐metal catalyst. A robust manganese(I) complex enabled the expedient annulation of MCPs by synthetically meaningful ketimines to deliver, upon one‐pot hydroarylation, densely substituted polycylic anilines in a step‐economical fashion. Mechanistic studies provided strong support for a facile organometallic C−H manganation, while typical cobalt, ruthenium, rhodium, and palladium catalysts were found completely ineffective.     

Manganese(I)‐Catalyzed C−H Activation/Diels–Alder/retro‐Diels–Alder Domino Alkyne Annulation featuring Transformable Pyridines

Complexity‐increasing Domino reactions comprising C?H allenylation, a Diels–Alder reaction, and a retro‐Diels–Alder reaction were realized by a versatile catalyst derived from earth‐abundant, non‐toxic manganese. The C?H activation/Diels–Alder/retro‐Diels–Alder alkyne annulation sequence provided step‐economical access to valuable indolone alkaloid derivatives through a facile organometallic C?H activation manifold with transformable pyridines.     

Ring‐Size‐Modulated Reactivity of Putative Dicobalt‐Bridging Nitrides: C−H Activation versus Phosphinimide Formation

Dicobalt complexes supported by flexible macrocyclic ligands were used to target the generation of the bridging nitrido species [(ⁿ PDI₂)Co₂(μ‐N)(PMe₃)₂]³⁺ (PDI=2,6‐pyridyldiimine; n =2, 3, corresponding to the number of catenated methylene units between imino nitrogen atoms). Depending on the size of the macrocycle and the reaction conditions (solution versus solid‐state), the thermolysis of azide precursors yielded bridging phosphinimido [(²PDI₂)Co₂(μ‐NPMe₃)(PMe₃)₂]³⁺, amido [(ⁿ PDI₂)Co₂(μ‐NH₂)(PMe₃)₂]³⁺ (n =2, 3), and C−H amination [(³PDI₂*‐μ‐NH)Co₂(PMe₃)₂]³⁺ products. All results are consistent with the initial formation of [(ⁿ PDI₂)Co₂(μ‐N)(PMe₃)₂]³⁺, followed by 1) PMe₃ attack on the nitride, 2) net hydrogen‐atom transfer to form N−H bonds, or 3) C−H amination of the alkyl linker of the ⁿ PDI₂ ligand.     

Hydrogen‐Atom Abstraction Reactions by Manganese(V)– and Manganese(IV)–Oxo Porphyrin Complexes in Aqueous Solution

High‐valent manganese(IV or V)–oxo porphyrins are considered as reactive intermediates in the oxidation of organic substrates by manganese porphyrin catalysts. We have generated Mn^V– and Mn^IV–oxo porphyrins in basic aqueous solution and investigated their reactivities in C? H bond activation of hydrocarbons. We now report that Mn^V– and Mn^IV–oxo porphyrins are capable of activating C? H bonds of alkylaromatics, with the reactivity order of Mn^V–oxo>Mn^IV–oxo; the reactivity of a Mn^V–oxo complex is 150 times greater than that of a Mn^IV–oxo complex in the oxidation of xanthene. The C? H bond activation of alkylaromatics by the Mn^V– and Mn^IV–oxo porphyrins is proposed to occur through a hydrogen‐atom abstraction, based on the observations of a good linear correlation between the reaction rates and the C? H bond dissociation energy (BDE) of substrates and high kinetic isotope effect (KIE) values in the oxidation of xanthene and dihydroanthracene (DHA). We have demonstrated that the disproportionation of Mn^IV–oxo porphyrins to Mn^V–oxo and Mn^III porphyrins is not a feasible pathway in basic aqueous solution and that Mn^IV–oxo porphyrins are able to abstract hydrogen atoms from alkylaromatics. The C? H bond activation of alkylaromatics by Mn^V– and Mn^IV–oxo species proceeds through a one‐electron process, in which a Mn^IV–‐oxo porphyrin is formed as a product in the C? H bond activation by a Mn^V–oxo porphyrin, followed by a further reaction of the Mn^IV–oxo porphyrin with substrates that results in the formation of a Mn^III porphyrin complex. This result is in contrast to the oxidation of sulfides by the Mn^V–oxo porphyrin, in which the oxidation of thioanisole by the Mn^V–oxo complex produces the starting Mn^III porphyrin and thioanisole oxide. This result indicates that the oxidation of sulfides by the Mn^V–oxo species occurs by means of a two‐electron oxidation process. In contrast, a Mn^IV–oxo porphyrin complex is not capable of oxidizing sulfides due to a low oxidizing power in basic aqueous solution.     

The Equatorial Ligand Effect on the Properties and Reactivity of Iron(V) Oxo Intermediates

High-valent metal oxo oxidants are common catalytic-cycle intermediates in enzymes and known to be highly reactive. To understand which features of these oxidants affect their reactivity, a series of biomimetic iron(V) oxo oxidants with peripherally substituted biuret-modified tetraamido macrocyclic ligands were synthesized and characterized. Major shifts in the UV/Vis absorption as a result of replacing a group in the equatorial plane of the iron(V) oxo species were found. Further characterization by EPR spectroscopy, ESI-MS, and resonance Raman spectroscopy revealed differences in structure and the electronic configuration of these complexes. A systematic reactivity study with a range of substrates was performed and showed that the reactions are affected by electron-withdrawing substituents in the equatorial ligand, which enhance the reaction rate by almost 10¹⁶ orders of magnitude. Thus, the long-range electrostatic perturbations have a major influence on the rate constant. Finally, computational studies identified the various electronic contributions to the rate-determining reaction step and explained how the equatorial ligand periphery affects the properties of the oxidant.     

Synergistic Manganese(I) C−H Activation Catalysis in Continuous Flow: Chemoselective Hydroarylation

Chemoselective hydroarylations were accomplished by a novel synergistic Brønsted acid/manganese(I)‐catalyzed C−H activation manifold. Thus, alkynes bearing O‐leaving groups could, for the first time, be employed for C−H alkenylations without concurrent β‐O elimination, thereby setting the stage for versatile late‐stage diversifications. Also described is the first manganese‐catalyzed C−H activation in continuous flow, thus enabling efficient hydroarylations within only 20 minutes.     

Mass‐Production of Mesoporous MnCo2O4 Spinels with Manganese(IV)‐ and Cobalt(II)‐Rich Surfaces for Superior Bifunctional Oxygen Electrocatalysis

A mesoporous MnCo₂O₄ electrode material is made for bifunctional oxygen electrocatalysis. The MnCo₂O₄ exhibits both Co₃O₄‐like activity for oxygen evolution reaction (OER) and Mn₂O₃‐like performance for oxygen reduction reaction (ORR). The potential difference between the ORR and OER of MnCo₂O₄ is as low as 0.83 V. By XANES and XPS investigation, the notable activity results from the preferred Mn^IV‐ and Co^II‐rich surface. The electrode material can be obtained on large‐scale with the precise chemical control of the components at relatively low temperature. The surface state engineering may open a new avenue to optimize the electrocatalysis performance of electrode materials. The prominent bifunctional activity shows that MnCo₂O₄ could be used in metal–air batteries and/or other energy devices.