The Three‐Dimensional Dendrite‐Free Zinc Anode on a Copper Mesh with a Zinc‐Oriented Polyacrylamide Electrolyte Additive

Rechargeable aqueous zinc‐ion batteries have been considered as a promising candidate for next‐generation batteries. However, the formation of zinc dendrites are the most severe problems limiting their practical applications. To develop stable zinc metal anodes, a synergistic method is presented that combines the Cu‐Zn solid solution interface on a copper mesh skeleton with good zinc affinity and a polyacrylamide electrolyte additive to modify the zinc anode, which can greatly reduce the overpotential of the zinc nucleation and increase the stability of zinc deposition. The as‐prepared zinc anodes show a dendrite‐free plating/stripping behavior over a wide range of current densities. The symmetric cell using this dendrite‐free anode can be cycled for more than 280 h with a very low voltage hysteresis (93.1 mV) at a discharge depth of 80 %. The high capacity retention and low polarization are also realized in Zn/MnO₂ full cells.     

Water‐Mediated Synthesis of a Superionic Halide Solid Electrolyte

To promote the development of solid‐state batteries, polymer‐, oxide‐, and sulfide‐based solid‐state electrolytes (SSEs) have been extensively investigated. However, the disadvantages of these SSEs, such as high‐temperature sintering of oxides, air instability of sulfides, and narrow electrochemical windows of polymers electrolytes, significantly hinder their practical application. Therefore, developing SSEs that have a high ionic conductivity (>10^?3 S cm^?1), good air stability, wide electrochemical window, excellent electrode interface stability, low‐cost mass production is required. Herein we report a halide Li⁺ superionic conductor, Li₃InCl₆, that can be synthesized in water. Most importantly, the as‐synthesized Li₃InCl₆ shows a high ionic conductivity of 2.04×10^?3 S cm^?1 at 25 °C. Furthermore, the ionic conductivity can be recovered after dissolution in water. Combined with a LiNi_0.8Co_0.1Mn_0.1O₂ cathode, the solid‐state Li battery shows good cycling stability.     

An In‐tether Chiral Center Modulates the Helicity,Cell Permeability,and Target Binding Affinity of a Peptide

The addition of a precisely positioned chiral center in the tether of a constrained peptide is reported, yielding two separable peptide diastereomers with significantly different helicity, as supported by circular dichroism (CD) and NMR spectroscopy. Single crystal X‐ray diffraction analysis suggests that the absolute configuration of the in‐tether chiral center in helical form is R, which is in agreement with theoretical simulations. The relationship between the secondary structure of the short peptides and their biochemical/biophysical properties remains elusive, largely because of the lack of proper controls. The present strategy provides the only method for investigating the influence of solely conformational differences upon the biochemical/biophysical properties of peptides. The significant differences in permeability and target binding affinity between the peptide diastereomers demonstrate the importance of helical conformation.     

Low‐Temperature Anharmonicity in Cesium Chloride (CsCl)

Anharmonic lattice vibrations govern heat transfer in materials, and anharmonicity is commonly assumed to be dominant at high temperature. The textbook cubic ionic defect‐free crystal CsCl is shown to have an unexplained low thermal conductivity at room temperature (ca. 1 W/(m K)), which increases to around 13 W/(m K) at 25 K. Through high‐resolution X‐ray diffraction it is unexpectedly shown that the Cs atomic displacement parameter becomes anharmonic at 20 K.     

Decoupled Thermo‐ and pH‐Responsive Hydrogel Microspheres Cross‐Linked by Rotaxane Networks

Rotaxane cross‐linked (RC) microgels that exhibit a decoupled thermo‐ and pH‐responsive volume transition were developed. The pH‐induced changes of the aggregation/disaggregation states of cyclodextrin in the RC networks were used to control the swelling capacity of the entire microgels. Different from conventional thermo‐ and pH‐responsive microgels, which are usually obtained from copolymerizations involving charged monomers, the RC microgels respond to temperature as intended, even in the presence of charged functional molecules such as dyes in the microgel dispersion. The results of this study should lead to new applications, including drug delivery systems that require a retention of their smart functions even in environments that may contain foreign ions, for example, in in vivo experiments.     

单宁作为共引发剂和交联剂制备高伸长率水凝胶

以过硫酸铵为引发剂(APS)、杨梅综合单宁(TA)作为共引发剂和交联剂,通过自由基聚合制备了高伸长率水凝胶(TIC-gel)。通过红外光谱(FT-IR)、核磁共振(~1 H-NMR)和浸泡尿素的方法研究了TA在TIC-gel中形成化学交联的机理。通过拉伸、压缩测试和流变学测试系统地分析了TIC-gel的力学性能和影响因素。结果表明:相比于传统化学交联水凝胶(PAM-MBA-gel),利用TA制备的凝胶具有高伸长率(2 250%)和高韧性(3.51 MJ/m3)。利用这一新的形成交联的方法所得的凝胶即使在高浓度时也能形成均匀的结构,可以很好地分散应力,为TIC-gel的高伸长率作出贡献。     

Enantioseparation of Au20(PP3)4Cl4 Clusters with Intrinsically Chiral Cores

Au₂₀(PP₃)₄Cl₄ (PP₃=tris(2‐(diphenylphosphino)ethyl) phosphine), abbreviated as Au₂₀, is the only Au nanocluster with an intrinsically chiral core without a chiral environment (chiral ligands or Au‐thiolate staples), making it a unique object to understand chiral evolution and explore chiral applications. Unfortunately, the synthesized Au₂₀ is racemic, and its enantiomers have not yet been separated. Herein, we report a supramolecular assembly strategy with α‐cyclodextrin (α‐CD) to afford enantiopure Au₂₀ in bulk, and an enantiomer excess (ee) value of as‐separated Au₂₀ of 97 %. As a result of its high purity, the distinctive optical activity of Au₂₀, which originates from electronic transitions confined in chiral cores, is fully explored. Theoretical studies reveals that the enantioseparation results from the preferential self‐assembly of α‐CD with organic ligands on the surface of right‐handed Au₂₀.     

Synthesis and Characterization of Cyclopropaosmanaphthalenes Containing a Fused σ‐Aromatic Metallacyclopropene Unit

Metalla‐aromatics are important complexes that show unique properties owing to their highly conjugated systems, which show Hückel or Möbius aromaticity. Recently, several metalla‐aromatics showing spiro‐aromaticity or σ‐aromaticity have been reported. Herein, we report the isolation of the first cyclopropametallanaphthalenes, in which the metallacyclopropene ring shows σ‐aromaticity and weak hyperconjugative aromaticity. The reaction of OsCl₂(PPh₃)₃ with o‐ethynylphenyl alkynes in the presence of PPh₃ followed by protonation with HCl yielded the first cyclopropametallanaphthalenes. The reaction mechanism and the aromaticity were also investigated by density functional theory studies.     

Turning Regioselectivity into Stereoselectivity: Efficient Dual Resolution of P‐Stereogenic Phosphine Oxides through Bifurcation of the Reaction Pathway of a Common Intermediate

Synthetic routes that provide facile access to either enantiomeric form of a target compound are particularly valuable. The crystallization‐free dual resolution of phosphine oxides that gives highly enantioenriched materials (up to 94 % ee) in excellent yields is reported. Both enantiomeric oxides have been prepared from a single intermediate, (R_P)‐alkoxyphosphonium chloride, which is formed in the course of a selective dynamic kinetic resolution using a single enantiomer of menthol as the chiral auxiliary. The origin of the dual stereoselectivity lies in bifurcation of the reaction pathway of this intermediate, which works as a stereochemical railroad switch. Under controlled conditions, Arbuzov‐type collapse of this intermediate proceeds through C O bond fission with retention of the configuration at the phosphorus center. Conversely, alkaline hydrolysis of the P O bond leads to the opposite S_P enantiomer.     

Mesoporous Semimetallic Conductors: Structural and Electronic Properties of Cobalt Phosphide Systems

Mesoporous cobalt phosphide (meso‐CoP) was prepared by the phosphorization of ordered mesoporous cobalt oxide (meso‐Co₃O₄). The electrical conductivity of meso‐CoP is 37 times higher than that of nonporous CoP, and it displays semimetallic behavior with a negligibly small activation energy of 26 meV at temperatures below 296 K. Above this temperature, only materials with mesopores underwent a change in conductivity from semimetallic to semiconducting behavior. These properties were attributed to the coexistence of nanocrystalline Co₂P phases. The poor crystallinity of mesoporous materials has often been considered to be a problem but this example clearly shows its positive aspects. The concept introduced here should thus lead to new routes for the synthesis of materials with high electronic conductivity.