Synthesis of D‐π‐A‐π type benzodithiophene‐quinoxaline copolymers by direct arylation and their application in organic solar cells

Conjugated copolymers based on benzodithiophene (BDT) derivatives and thiophene‐quinoxaline‐thiophene (TQT) segments represent an efficient class of light harvesting materials for organic photovoltaic (OPV) applications. Commonly, BDT‐TQT copolymers are synthesized by Stille cross‐coupling polymerization. In this study, alkoxy and thienyl functionalized alternating BDT‐alt‐TQT copolymers are synthesized by direct arylation polymerization (DArP), using Ozawa conditions. An extensive optimization of the reaction conditions such as the catalytic system, solvent, temperature, base, and the concentration of the catalyst is accomplished. The optical and electrochemical properties of the copolymers obtained by DArP are compared to the reference polymers synthesized by Stille cross‐coupling polymerization. Finally, the optimized BDT‐alt‐TQT copolymers are incorporated into organic solar cells as electron donors. The solar cells of the DArP copolymers exhibit power conversion efficiencies up to 80% (rel.) of their Stille cross coupling analogues. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1457–1467     

Synthesis of phosphorescent iridium-containing acrylic monomers and their room-temperature polymerization by Cu(0)-RDRP

A series of acrylic monomers based on cyclometalated iridium(III) complexes have been synthesized based on common phosphorescent emitters for organic light-emitting diodes. A simple room-temperature polymerization procedure for these materials was developed using Cu(0) reversible deactivation radical polymerization, providing polymers with low dispersities of 1.08–1.14 at conversions from 81 to 93% when the Ir complexes are copolymerized with a carbazole-based acrylic host. These methods were also found to be suitable for the preparation of high-molecular-weight polymers with M _n approaching 40,000 Da, as well as block copolymers formed in one pot from the chain extension of methyl acrylate. This scalable room-temperature synthesis of iridium-containing copolymers and block copolymers provides a useful route to optoelectronic materials, which we anticipate can be readily adapted to a broad range of acrylic metallopolymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2539–2546     

Pyromellitic diimide‐based copolymers for ambipolar field‐effect transistors: Synthesis,characterization, and device applications

A pyromellitic diimide building block, 2,6‐bis(2‐decyltetradecyl)?4,8‐di(thiophen‐2‐yl)pyrrolo[3,4‐f]isoindole‐1,3,5,7(2H,6H)‐tetraone ( 4 ), is synthesized. Based on this building block and other electron‐rich units such as 2,2′‐bithiophene, thieno[3,2‐b]thiophene and 4,8‐bis(dodecyloxy)benzo[1,2‐b:4,5‐b′]dithiophene, three conjugated polymers P1 , P2 , and P3 are prepared in good yield via Stille coupling polymerization. These new copolymers have good solubility in common organic solvents and exhibit good thermal stability. The optical, electrochemical, and thermal properties of these polymers P1–P3 are carefully investigated, and their applications in solution‐processed organic field‐effect transistors are also studied. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2454–2464     

Synthesis and opto-electronic properties of functionalized pyrimidine-based conjugated polymers

Side chain engineering has been used for tuning the opto-electronic properties of organic semiconductors. In this work, a series of pyrimidine-based donor-acceptor (D-A) conjugated polymers functionalized with electron-withdrawing or electron-donating side chains were synthesized. The opto-electronic properties of the pyrimidine D-A conjugated polymers were investigated focusing on the dependence on the electron withdrawing strength of the acceptor moiety, while maintaining the same donor moiety. Fine-tuning of the energy levels was achieved by introducing electron donating (alkoxy [ OR] and alkylthio [ SR]) or electron withdrawing (alkylsulfinyl [ SOR] and alkylsulfonyl [ SO₂R]) side chains onto the acceptor moiety. The effects of side chain modification have been investigated through DFT calculations, UV–vis analysis, and electrochemical measurements. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2547–2553     

Synthesis and characterization of new low bandgap polyfluorene copolymers for bulk heterojunction solar cells

Two new low bandgap alternating polyfluorene copolymers based on dioctylfluorene and donor‐acceptor‐donor monomers have been synthesized via a Suzuki polymerization reaction. The resulting copolymers have low optical bandgaps at 1.99–1.98 eV. The bulk heterojunction polymer solar cells were fabricated with the conjugated polymers as the electron donor and 6.6‐phenyl C₆₁‐butyric acid methyl ester as the electron acceptor. The power conversion efficiencies of the solar cells based on copolymers 1 and 2 are 0.37 and 0.42%, respectively, under the illumination of AM 1.5, 100 mW/cm². The results indicate that the two copolymers are promising conjugated polymers for polymer solar cells. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5336–5343, 2009     

Photovoltaic polymers based on difluoroqinoxaline units with deep HOMO levels

We report the synthesis of low bandgap polymers with a difluoroquinoxaline unit by Stille polymerization for use in polymer solar cells (PSCs). A new series of copolymers with 2,3‐didodecyl‐6,7‐difluoro quinoxaline as the electron‐deficient unit and alkyloxybenzo[1,2‐b:4,5‐b′]dithiophene and thiophene as the electron‐rich unit were synthesized. The photovoltaic properties of the devices based on the synthesized polymers revealed that the fluorine atoms at the quinoxaline units aid in decreasing the highest occupied molecular orbital (HOMO) energy levels; this in turn increased the open circuit voltage of the devices. The polymers with long alkyl chains exhibited good solubility that increased their molecular weight, but the power conversion efficiency was low. Efficient polymer solar cells were fabricated by blending the synthesized copolymers with PC₇₁BM, and the PCE increased up to 5.11% under 100 mW cm⁻² AM 1.5 illumination. These results demonstrate that the importance of having a control polymer to be synthesized and characterized side by side with the fluorine analogues. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1489–1497     

Fluorobenzotriazole-Based Medium-Bandgap Conjugated D–A Copolymers for Applications to Fullerene-Based and Nonfullerene Polymer Solar Cells

Two new medium-bandgap (MBG) donor–acceptor (D–A) conjugated polymers (PSTF and PDTS) with fluorobenzotriazole as an A unit and spiro[cyclopenta[1,2-b:5,4-b′]dithiophene-4,9′-fluorene] (STF) or dithienosilole (DTS) as the D unit are designed and synthesized as donor materials for polymer solar cell (PSC) applications. PSTF shows a broader absorption spectrum relative to PDTS reflecting an additional high-energy absorption band due to the conjugated thiophene side chains on STF moiety. Compared with PDTS, PSTF exhibits weaker π–π aggregation and lower lying HOMO level. Photovoltaic properties of the PSCs reveal that either PSTF or PDTS using PC₆₁BM as acceptor exhibits better performances than that of ITIC as acceptor, which results from the simultaneously increased V_oc, J_sc, and FF of PC₆₁BM-based PSCs. Moreover, when combined with PC₆₁BM and ITIC, the PSTF-based PSCs exhibit an efficiency of 3.66% and 2.42%, respectively, which is 45% and almost 1.5 times higher than that of the PDTS-based PSCs, respectively. This can be ascribed to the obviously improved V_oc and FF of PSTF-based PSCs benefitted from the deeper HOMO level and better active layer morphology. Our work demonstrates that using spiro-annulated building block as donor unit to construct MBG D-A copolymers is an alternative and effective approach for achieving efficient donor materials in PSCs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2330–2343     

Synthesis of phenylenevinylene and naphthylenevinylene homopolymers and block copolymers by ring‐opening metathesis polymerization

Homopolymers and copolymers containing phenylenevinylenes and naphthylenevinylenes can be synthesized by ring‐opening metathesis polymerization of strained monomers such as tetraoctyloxy‐substituted cyclophanedienes and naphthalenophanedienes initiated by the third‐generation Grubbs’ initiator. The resulting homopolymers exhibited low polydispersities. The block copolymers can also be synthesized by the sequential ring‐opening metathesis polymerization of two individual monomers. The structures of homopolymers and block copolymers were fully characterized by nuclear magnetic resonance spectroscopy. The molecular weight distribution of the block copolymers is relatively broad compared to their parent homopolymers possibly due to chain transfer reaction. The molar ratio of the two blocks can be tailored by the ratio of the monomers employed. The block copolymers exhibited a more efficient energy transfer in the solid state between the different blocks than those carried out in solution. The optical and electrochemical properties of the polymers were investigated and exhibited the potential uses in optoelectronics devices. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 67–74     

Direct through anionic,cationic, and radical active species: Terminal carbon–halogen bond for “controlled”/living polymerizations of styrene

In this work, we examined the synthesis of novel block (co)polymers by mechanistic transformation through anionic, cationic, and radical living polymerizations using terminal carbon–halogen bond as the dormant species. First, the direct halogenation of growing species in the living anionic polymerization of styrene was examined with CCl₄ to form a carbon–halogen terminal, which can be employed as the dormant species for either living cationic or radical polymerization. The mechanistic transformation was then performed from living anionic polymerization into living cationic or radical polymerization using the obtained polymers as the macroinitiator with the SnCl₄/n‐Bu₄NCl or RuCp^*Cl(PPh₃)/Et₃N initiating system, respectively. Finally, the combination of all the polymerizations allowed the synthesis block copolymers including unprecedented gradient block copolymers composed of styrene and p‐methylstyrene. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 465–473     

Jacketed polymers: Controlled synthesis of mesogen‐jacketed polymers and block copolymers

The controlled radical polymerization of mesogen‐jacketed liquid crystalline polymers has triggered great interests in synthesis of complex structures as well as well‐defined linear homopolymers with controlled molecular weight and narrow molecular weight distributions. This review highlights the synthetic strategies of controlled radical polymerization of linear homopolymers, star polymers, superbranched polymers, graft polymers, block copolymers, star block copolymers, and so on. The employed living methods include nitroxide‐mediated radical polymerization and atom transfer radical polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 319–330, 2009     

Thiophene π bridge effect on bulky side‐chained benzodithiophene‐based photovoltaic polymers

Recently, we have used terthiophene side chain to modify benzo[1,2‐b:4,5‐b′]dithiophene (BDT) to form novel building block for BDT polymers. In this paper, this building block is used to copolymerized with thieno[3,4‐c]pyrrole‐4,6‐dione (TPD) and thieno[3,4‐b]thiophene (TT). This building block and TPD‐ or TT‐based polymers (P1 and P3) show high open circuit voltage (V_OC) (ca. 0.9–0.95 V) and low energy loss (E_g–eV_OC) in solar cells devices compared with similar polymers without bulky side chain. We further introduce thiophene π bridge into these polymers backbone to form two other polymers (P2 and P4). We find this thiophene π bridge does contribute to this bulky side chained benzodithiophene polymer photovoltaic performances, especially for power conversion efficiencies (PCEs). The polymer solar cells (PSCs) performances are moderate in this article due to the serious aggregation in the PSCs active layer. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1615–1622     

A “click” approach to ROMP block copolymers

Amphiphilic block copolymers can be conveniently prepared via convergent syntheses, allowing each individual polymer block to be prepared via the polymerization technique that gives the best architectural control. The convergent “click‐chemistry” route presented here, gives access to amphiphilic diblock copolymers prepared from a ring opening metathesis polymer and polyethylene glycol. Because of the high functional group tolerance of ruthenium carbene initiators, highly functional ring opening metathesis polymerization (ROMP) polymer blocks can be prepared. The described synthetic route allows the conjugation of these polymer blocks with other end‐functional polymers to give well‐defined and highly functional amphiphilic diblock copolymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2913–2921, 2008     

Polymerization of oligo(ethylene glycol) (meth)acrylates: Toward new generations of smart biocompatible materials

Monomers composed of a (meth)acrylate moiety connected to a short poly(ethylene)glycol (PEG) chain are versatile building‐blocks for the preparation of “smart” biorelevant materials. Many of these monomers are commercial and can be easily polymerized by either anionic, free‐radical, or controlled radical polymerization. The latter approach allows synthesis of well‐defined PEG‐based macromolecular architectures such as amphiphilic block copolymers, dense polymer brushes, or biohybrids. Furthermore, the resulting polymers exhibit fascinating solution properties in aqueous medium. Depending on the molecular structure of their monomer units, non linear PEG analogues can be either insoluble in water, readily soluble up to 100 °C, or thermoresponsive. Thus, these polymers can be used for building a wide variety of modern materials such as biosensors, artificial tissues, smart gels for chromatography, and drug carriers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3459–3470, 2008     

Optimal bulk-heterojunction morphology enabled by fibril network strategy for high-performance organic solar cells

A bicontinuous network formed spontaneously upon film preparation is highly desirable for bulk-heterojunction(BHJ) organic solar cells(OSCs). Many donor-acceptor(D-A) type conjugated polymers can self-assemble into polymer fibrils in the solid state and such fibril-assembly can construct the morphological framework by forming a network structure, inducing the formation of ideal BHJ morphology. Our recent works have revealed that the fibril network strategy(FNS) can control the blend morphology in fullerene, non-fullerene and ternary OSCs. It has been shown that the formation of fibril network can optimize phase separation scale and ensure efficient exciton dissociation and charge carriers transport, thus leading to impressive power conversion efficiencies(PCEs) and high fill factor(FF) values. We believe that FNS will provide a promising approach for the optimization of active layer morphology and the improvement of photovoltaic performance, and further promote the commercialization of OSCs.     

Construction of nanostructures in aqueous solution from amphiphilic glucose‐derived polycarbonates

Carbohydrates are the fundamental building blocks of many natural polymers, their wide bioavailability, high chemical functionality, and stereochemical diversity make them attractive starting materials for the development of new synthetic polymers. In this work, one such carbohydrate, d ‐glucopyranoside, was utilized to produce a hydrophobic five‐membered cyclic carbonate monomer to afford sugar‐based amphiphilic copolymers and block copolymers via organocatalyzed ring‐opening polymerizations with 4‐methylbenzyl alcohol and methoxy poly(ethylene glycol) as initiator and macroinitiator, respectively. To modulate the amphiphilicities of these polymers acidic benzylidene cleavage reactions were performed to deprotect the sugar repeat units and present hydrophilic hydroxyl side chain groups. Assembly of the polymers under aqueous conditions revealed interesting morphological differences, based on the polymer molar mass and repeat unit composition. The initial polymers, prior to the removal of the benzylidenes, underwent a morphological change from micelles to vesicles as the sugar block length was increased, causing a decrease in the hydrophilic–hydrophobic ratio. Deprotection of the sugar block increased the hydrophilicity and gave micellar morphologies. This tunable polymeric platform holds promise for the production of advanced materials for implementation in a diverse range of applications. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 432–440     

Synthesis of bipolar charge transporting block copolymers and characterization for organic light‐emitting diode

A series of hole and electron transporting random and block copolymers consisting of triphenylamine moiety as a hole transporting unit and oxadiazole moiety as an electron transporting unit have been prepared via a nitroxide mediated radical polymerization. Oxadiazole monomers with t‐butyl or trifluoromethyl groups, 2 and 7, respectively, were used for copolymerization. Photoluminescent measurements of polymers revealed that the formation of the exciplex between triphenylamine and oxadiazole units tends to occur in the order of random copolymers, block copolymers, and polymer blends, implying phase‐separated morphologies in block or blend systems. The polymers were applied for OLED devices, and we found that the morphology in the polymer layer critically affected device performance. The block copolymer comprising hole and electron transporting units with the composition of 14/86 showed the highest external quantum efficiency over 10%. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1461–1468, 2010     

Stimuli‐responsive amphiphilic PDMAEMA‐b‐PLMA copolymers and their cationic and zwitterionic analogs

In this work, the synthesis and characterization of novel amphiphilic diblock copolymers of poly(2‐dimethylamino ethyl methacrylate)‐b‐poly(lauryl methacrylate), PDMAEMA‐b‐PLMA, using the reversible addition‐fragmentation chain transfer (RAFT) polymerization technique, are reported. The diblocks were successfully derivatized to cationic and zwitterionic block polyelectrolytes by quaternization and sulfobetainization of the PDMAEMA block, respectively. Furthermore, their molecular and physicochemical characterization was performed by using characterization techniques such as NMR and FTIR, size exclusion chromatography, light scattering techniques, and transmission electron microscopy. The structure of the diblock micelles, their behavior, and properties in aqueous solution were investigated under the effect of pH, temperature, and ionic strength, as PDMAEMA and its derivatives are stimuli‐responsive polymers and exhibit responses to variations of at least one of these physicochemical parameters. These new families of stimuli‐responsive block copolymers respond to changes of their environment giving interesting nanostructures, behavioral motifs, and properties, rendering them useful as nanocarriers for drug delivery and gene therapy. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 598–610     

Tuning the frontier molecular orbital energy levels of n‐type conjugated copolymers by using angular‐shaped naphthalene tetracarboxylic diimides,and their use in all‐polymer solar cells with high open‐circuit voltages

An angular‐shaped naphthalene tetracarboxylic diimide (NDI) was designed and synthesized as a new building block for n‐type conjugated polymers to tune their energy levels. Three n‐type copolymers incorporating this angular‐shaped NDI as the acceptor moiety were obtained by Stille coupling reactions and had number average molecular weights of 18.7–73.0 kDa. All‐polymer bulk‐heterojunction solar cells made from blends of these polymers with poly(3‐hexylthiophene) gave a power conversion efficiency up to 0.32% and exhibited an open‐circuit voltage (V_oc) up to 0.94 V due to their relative high‐lying lowest unoccupied molecular orbital energy levels. The high V_oc of 0.94 V is higher than that of solar cells based on linear‐shaped NDI‐containing polymers (<0.6 V). The results indicate that the angular‐shaped NDI is a promising building block for constructing nonfullerene polymer acceptors for solar cells with high open‐circuit voltages. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of statistical and block copolymers containing adamantyl and norbornyl moieties by reversible addition‐fragmentation chain transfer polymerization

The synthesis of statistical and block copolymers, consisting of monomers often used as resist materials in photolithography, using reversible addition‐fragmentation chain transfer (RAFT) polymerization is reported. Methacrylate and acrylate monomers with norbornyl and adamantyl moieties were polymerized using both dithioester and trithiocarbonate RAFT agents. Block copolymers containing such monomers were made with poly(methyl acrylate) and polystyrene macro‐RAFT agents. In addition to have the ability to control molecular weight, polydispersity, and allow block copolymer formation, the polymers made via RAFT polymerization required end‐group removal to avoid complications during the photolithography. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 943–951, 2010