A Sustainable Redox‐Flow Battery with an Aluminum‐Based,Deep‐Eutectic‐Solvent Anolyte

Nonaqueous redox‐flow batteries are an emerging energy storage technology for grid storage systems, but the development of anolytes has lagged far behind that of catholytes due to the major limitations of the redox species, which exhibit relatively low solubility and inadequate redox potentials. Herein, an aluminum‐based deep‐eutectic‐solvent is investigated as an anolyte for redox‐flow batteries. The aluminum‐based deep‐eutectic solvent demonstrated a significantly enhanced concentration of circa 3.2 m in the anolyte and a relatively low redox potential of 2.2 V vs. Li⁺/Li. The electrochemical measurements highlight that a reversible volumetric capacity of 145 Ah L⁻¹ and an energy density of 189 Wh L⁻¹ or 165 Wh kg⁻¹ have been achieved when coupled with a I₃⁻/I⁻ catholyte. The prototype cell has also been extended to the use of a Br₂‐based catholyte, exhibiting a higher cell voltage with a theoretical energy density of over 200 Wh L⁻¹. The synergy of highly abundant, dendrite‐free, multi‐electron‐reaction aluminum anodes and environmentally benign deep‐eutectic‐solvent anolytes reveals great potential towards cost‐effective, sustainable redox‐flow batteries.     

A Bio‐Inspired,Heavy‐Metal‐Free,Dual‐Electrolyte Liquid Battery towards Sustainable Energy Storage

Wide‐scale exploitation of renewable energy requires low‐cost efficient energy storage devices. The use of metal‐free, inexpensive redox‐active organic materials represents a promising direction for environmental‐friendly, cost‐effective sustainable energy storage. To this end, a liquid battery is designed using hydroquinone (H₂BQ) aqueous solution as catholyte and graphite in aprotic electrolyte as anode. The working potential can reach 3.4 V, with specific capacity of 395 mA h g⁻¹ and stable capacity retention about 99.7 % per cycle. Such high potential and capacity is achieved using only C, H and O atoms as building blocks for redox species, and the replacement of Li metal with graphite anode can circumvent potential safety issues. As H₂BQ can be extracted from biomass directly and its redox reaction mimics the bio‐electrochemical process of quinones in nature, using such a bio‐inspired organic compound in batteries enables access to greener and more sustainable energy‐storage technology.     

Single‐Molecule Redox‐Targeting Reactions for a pH‐Neutral Aqueous Organic Redox Flow Battery

Aqueous organic redox flow batteries (AORFBs) have received considerable attention for large‐scale energy storage. Quinone derivatives, such as 9,10‐anthraquinone‐2,7‐disulphonic acid (2,7‐AQDS), have been explored intensively owing to potentially low cost and swift reaction kinetics. However, the low solubility in pH‐neutral electrolytes restricts their application to corrosive acidic or caustic systems. Herein, the single molecule redox‐targeting reactions of 2,7‐AQDS anolyte are presented to circumvent its solubility limit in pH‐neutral electrolytes. Polyimide was employed as a low‐cost high‐capacity solid material to boost the capacity of 2,7‐AQDS electrolyte to 97 Ah L^?1. Through in situ FTIR spectroscopy, a hydrogen‐bonding mediated reaction mechanism was disclosed. In conjunction with NaI as catholyte and nickel hexacyanoferrate as the catholyte capacity booster, a single‐molecule redox‐targeting reaction‐based full cell with energy density up to 39 Wh L^?1 was demonstrated.     

Bio‐Inspired Isoalloxazine Redox Moieties for Rechargeable Aqueous Zinc‐Ion Batteries

Organic electrode materials hold great potential for fabricating sustainable energy storage systems, however, the development of organic redox‐active moieties for rechargeable aqueous zinc‐ion batteries is still at an early stage. Here, we report a bio‐inspired riboflavin‐based aqueous zinc‐ion battery utilizing an isoalloxazine ring as the redox center for the first time. This battery exhibits a high capacity of 145.5 mAh g^?1 at 0.01 A g^?1 and a long‐life stability of 3000 cycles at 5 A g^?1. We demonstrate that isoalloxazine moieties are active centers for reversible zinc‐ion storage by using optical and photoelectron spectroscopies as well as theoretical calculations. Through molecule‐structure tailoring of riboflavin, the obtained alloxazine and lumazine molecules exhibit much higher theoretical capacities of 250.3 and 326.6 mAh g^?1, respectively. Our work offers an effective redox‐active moiety for aqueous zinc batteries and will enrich the valuable material pool for electrode design.     

Porphyrin‐Based Symmetric Redox‐Flow Batteries towards Cold‐Climate Energy Storage

Electrochemical energy storage with redox‐flow batteries (RFBs) under subzero temperature is of great significance for the use of renewable energy in cold regions. However, RFBs are generally used above 10 °C. Herein we present non‐aqueous organic RFBs based on 5,10,15,20‐tetraphenylporphyrin (H₂TPP) as a bipolar redox‐active material (anode: [H₂TPP]^2?/H₂TPP, cathode: H₂TPP/[H₂TPP]²⁺) and a Y‐zeolite–poly(vinylidene fluoride) (Y‐PVDF) ion‐selective membrane with high ionic conductivity as a separator. The constructed RFBs exhibit a high volumetric capacity of 8.72 Ah L^?1 with a high voltage of 2.83 V and excellent cycling stability (capacity retention exceeding 99.98 % per cycle) in the temperature range between 20 and ?40 °C. Our study highlights principles for the design of RFBs that operate at low temperatures, thus offering a promising approach to electrochemical energy storage under cold‐climate conditions.     

Electroactive organic anion‐doped polypyrrole as a low cost and renewable cathode for sodium‐ion batteries

We demonstrate here a remarkable electrochemical activation of polypyrrole chains by doping with redox‐active diphenylamine sulfonate anions. The organic redox dopant can not only serve as anionic counterions to enhance electrochemical activity of the polymer chains, but also contributes their redox capacity to the material. This organic‐polymer composite exhibits a quite high reversible capacity of 115 mA h g^?1, excellent rate capability and cycling stability, capable of serving as a low cost, and renewable cathode for Na‐ion batteries. Since the chemical doping method is simple and easily extendable for a large variety of organic anions and polymer networks, it is possible to adopt this new strategy for creating low cost and electrochemically active polymer materials for widespread electric storage applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

A Bio‐Inspired,Heavy‐Metal‐Free,Dual‐Electrolyte Liquid Battery towards Sustainable Energy Storage

Wide‐scale exploitation of renewable energy requires low‐cost efficient energy storage devices. The use of metal‐free, inexpensive redox‐active organic materials represents a promising direction for environmental‐friendly, cost‐effective sustainable energy storage. To this end, a liquid battery is designed using hydroquinone (H₂BQ) aqueous solution as catholyte and graphite in aprotic electrolyte as anode. The working potential can reach 3.4 V, with specific capacity of 395 mA h g^?1 and stable capacity retention about 99.7 % per cycle. Such high potential and capacity is achieved using only C, H and O atoms as building blocks for redox species, and the replacement of Li metal with graphite anode can circumvent potential safety issues. As H₂BQ can be extracted from biomass directly and its redox reaction mimics the bio‐electrochemical process of quinones in nature, using such a bio‐inspired organic compound in batteries enables access to greener and more sustainable energy‐storage technology.     

A Metal–Organic Compound as Cathode Material with Superhigh Capacity Achieved by Reversible Cationic and Anionic Redox Chemistry for High‐Energy Sodium‐Ion Batteries

Although sodium‐ion batteries (SIBs) are considered as alternatives to lithium‐ion batteries (LIBs), the electrochemical performances, in particular the energy density, are much lower than LIBs. A metal–organic compound, cuprous 7,7,8,8‐tetracyanoquinodimethane (CuTCNQ), is presented as a new kind of cathode material for SIBs. It consists of both cationic (Cu^II↔Cu^I) and anionic (TCNQ⁰↔TCNQ⁻↔ TCNQ²⁻) reversible redox reactions, delivering a discharge capacity as high as 255 mAh g⁻¹ at a current density of 20 mA g⁻¹. The synergistic effect of both redox‐active metal cations and organic anions brings an electrochemical transfer of multiple electrons. The transformation of cupric ions to cuprous ions occurs at near 3.80 V vs. Na⁺/Na, while the full reduction of TCNQ⁰ to TCNQ⁻ happens at 3.00–3.30 V. The remarkably high voltage is attributed to the strong inductive effect of the four cyano groups.     

A pH‐Neutral,Metal‐Free Aqueous Organic Redox Flow Battery Employing an Ammonium Anthraquinone Anolyte

Redox‐active anthraquinone molecules represent promising anolyte materials in aqueous organic redox flow batteries (AORFBs). However, the chemical stability issue and corrosion nature of anthraquinone‐based anolytes in reported acidic and alkaline AORFBs constitute a roadblock for their practical applications in energy storage. A feasible strategy to overcome these issues is migrating to pH‐neutral conditions and employing soluble AQDS salts. Herein, we report the 9,10‐anthraquinone‐2,7‐disulfonic diammonium salt AQDS(NH₄)₂ , as an anolyte material for pH‐neutral AORFBs with solubility of 1.9 m in water, which is more than 3 times that of the corresponding sodium salt. Paired with an NH₄I catholyte, the resulting pH‐neutral AORFB with an energy density of 12.5 Wh L^?1 displayed outstanding cycling stability over 300 cycles. Even at the pH‐neutral condition, the AQDS(NH₄)₂ /NH₄I AORFB delivered an impressive energy efficiency of 70.6 % at 60 mA cm^?2 and a high power density of 91.5 mW cm^?2 at 100 % SOC. The present AQDS(NH₄)₂ flow battery chemistry opens a new avenue to apply anthraquinone molecules in developing low‐cost and benign pH‐neutral flow batteries for scalable energy storage.     

Biological Chitin–MOF Composites with Hierarchical Pore Systems for Air‐Filtration Applications

Metal–organic frameworks (MOFs) are promising materials for gas‐separation and air‐filtration applications. However, for these applications, MOF crystallites need to be incorporated in robust and manageable support materials. We used chitin‐based networks from a marine sponge as a non‐toxic, biodegradable, and low‐weight support material for MOF deposition. The structural properties of the material favor predominant nucleation of the MOF crystallites at the inside of the hollow fibers. This composite has a hierarchical pore system with surface areas up to 800 m² g⁻¹ and pore volumes of 3.6 cm³ g⁻¹, allowing good transport kinetics and a very high loading of the active material. Ammonia break‐through experiments highlight the accessibility of the MOF crystallites and the adsorption potential of the composite indicating their high potential for filtration applications for toxic industrial gases.     

A Nitrogen‐Rich 2D sp2‐Carbon‐Linked Conjugated Polymer Framework as a High‐Performance Cathode for Lithium‐Ion Batteries

A two‐dimensional (2D) sp²‐carbon‐linked conjugated polymer framework (2D CCP‐HATN) has a nitrogen‐doped skeleton, a periodical dual‐pore structure and high chemical stability. The polymer backbone consists of hexaazatrinaphthalene (HATN) and cyanovinylene units linked entirely by carbon–carbon double bonds. Profiting from the shape‐persistent framework of 2D CCP‐HATN integrated with the electrochemical redox‐active HATN and the robust sp² carbon‐carbon linkage, 2D CCP‐HATN hybridized with carbon nanotubes shows a high capacity of 116 mA h g^?1, with high utilization of its redox‐active sites and superb cycling stability (91 % after 1000 cycles) and rate capability (82 %, 1.0 A g^?1 vs. 0.1 A g^?1) as an organic cathode material for lithium‐ion batteries.     

A pH‐Neutral,Metal‐Free Aqueous Organic Redox Flow Battery Employing an Ammonium Anthraquinone Anolyte

Redox‐active anthraquinone molecules represent promising anolyte materials in aqueous organic redox flow batteries (AORFBs). However, the chemical stability issue and corrosion nature of anthraquinone‐based anolytes in reported acidic and alkaline AORFBs constitute a roadblock for their practical applications in energy storage. A feasible strategy to overcome these issues is migrating to pH‐neutral conditions and employing soluble AQDS salts. Herein, we report the 9,10‐anthraquinone‐2,7‐disulfonic diammonium salt AQDS(NH₄)₂ , as an anolyte material for pH‐neutral AORFBs with solubility of 1.9 m in water, which is more than 3 times that of the corresponding sodium salt. Paired with an NH₄I catholyte, the resulting pH‐neutral AORFB with an energy density of 12.5 Wh L^?1 displayed outstanding cycling stability over 300 cycles. Even at the pH‐neutral condition, the AQDS(NH₄)₂ /NH₄I AORFB delivered an impressive energy efficiency of 70.6 % at 60 mA cm^?2 and a high power density of 91.5 mW cm^?2 at 100 % SOC. The present AQDS(NH₄)₂ flow battery chemistry opens a new avenue to apply anthraquinone molecules in developing low‐cost and benign pH‐neutral flow batteries for scalable energy storage.     

Six-Electron-Redox Iodine Electrodes for High-Energy Aqueous Batteries

Iodine (I₂) shows great promising as the active material in aqueous batteries due to its distinctive merits of high abundance in ocean and low cost. However, in conventional aqueous I₂-based batteries, the energy storage mechanism of I⁻/I₂ conversion is only two-electron redox reaction, limiting their energy density. Herein, six-electron redox chemistry of I₂ electrodes is achieved via the synergistic effect of redox-ion charge-carriers and halide ions in electrolytes. The redox-active Cu²⁺ ions in electrolytes induce the conversion between Cu²⁺ ions and I₂ to CuI at low potential. Simultaneously, the Cl⁻ ions in electrolytes activate the I₂/ICl redox couple at high potential. As a result, in our case, I₂-based battery system with six-electron redox is developed. Such energy storage mechanism with six-electron redox leads to high discharge potential and capacity, excellent rate capability, as well as stable cycling behavior of I₂ electrodes. Impressively, six-electron-redox I₂ cathodes can match various aqueous metal (e.g. Zn, Mn and Fe) anodes to construct metal||I₂ hybrid batteries. These hybrid batteries not only deliver enhanced capacities, but also exhibit higher operate voltages, which contributes to superior energy densities. Therefore, this work broadens the horizon for the design of high-energy aqueous I₂-based batteries.     

Rocking‐Chair Ammonium‐Ion Battery: A Highly Reversible Aqueous Energy Storage System

Aqueous rechargeable batteries are promising solutions for large‐scale energy storage. Such batteries have the merit of low cost, innate safety, and environmental friendliness. To date, most known aqueous ion batteries employ metal cation charge carriers. Here, we report the first “rocking‐chair” NH₄‐ion battery of the full‐cell configuration by employing an ammonium Prussian white analogue, (NH₄)_1.47Ni[Fe(CN)₆]_0.88, as the cathode, an organic solid, 3,4,9,10‐perylenetetracarboxylic diimide (PTCDI), as the anode, and 1.0 m aqueous (NH₄)₂SO₄ as the electrolyte. This novel aqueous ammonium‐ion battery demonstrates encouraging electrochemical performance: an average operation voltage of ca. 1.0 V, an attractive energy density of ca. 43 Wh kg⁻¹ based on both electrodes’ active mass, and excellent cycle life over 1000 cycles with 67 % capacity retention. Importantly, the topochemistry results of NH₄⁺ in these electrodes point to a new paradigm of NH₄⁺‐based energy storage.     

An Aqueous Conducting Redox‐Polymer‐Based Proton Battery that Can Withstand Rapid Constant‐Voltage Charging and Sub‐Zero Temperatures

Electrodes based on organic matter operating in aqueous electrolytes enable new approaches and technologies for assembling and utilizing batteries that are difficult to achieve with traditional electrode materials. Here, we report how thiophene‐based trimeric structures with naphthoquinone or hydroquinone redox‐active pendent groups can be processed in solution, deposited, dried and subsequently polymerized in solid state to form conductive (redox) polymer layers without any additives. Such post‐deposition polymerization offers efficient use of material, high mass loading (up to 10 mg cm^?2) and good flexibility in the choice of substrate and coating method. By employing these materials as anode and cathode in an acidic aqueous electrolyte a rocking‐chair proton battery is built. The battery shows good cycling stability (85 % after 500 cycles), withstands rapid charging, with full capacity (60 mAh g^?1) reached within 100 seconds, allows for direct integration with photovoltaics, and retains its favorable characteristics even at ?24 °C.     

A symmetric aqueous redox flow battery based on viologen derivative

Due to the diversity and feasibility of structural modification for organic molecules,organic-based redox flow batteries(ORFBs) have been widely investigated,especially in aqueous solution under neutral circumstance.In this work,a symmetric aqueous redox flow battery(SARFB) was rationally designed by employing a bipolar redox active molecule(N,N'-dimethyl-4,4-bipyridinium diiodide,MVI_2) as both cathode and anode materials and combining with an anion exchange membrane.For one MVI_2 flow battery,MV~(2+)/MV~(·+) and I~-/I_3~-serve as the redox couples of anode and cathode,respectively.The MVI_2 battery with a working voltage of 1.02 V exhibited a high voltage efficiency of 90.30% and energy efficiency of 89.44% after 450 cycles,and crossover problem was prohibited.The comparable conductivity of MVI_2 water solution enabled to construct a battery even without using supporting electrolyte.Besides,the bipolar character of MVI_2 battery with/without supporting electrolyte was investigated in the voltage range between-1.2 V and 1.2 V,showing excellent stable cycling stability during the polarity-reversal test.     

A Low‐Cost Neutral Zinc–Iron Flow Battery with High Energy Density for Stationary Energy Storage

Flow batteries (FBs) are one of the most promising stationary energy‐storage devices for storing renewable energy. However, commercial progress of FBs is limited by their high cost and low energy density. A neutral zinc–iron FB with very low cost and high energy density is presented. By using highly soluble FeCl₂/ZnBr₂ species, a charge energy density of 56.30 Wh L⁻¹ can be achieved. DFT calculations demonstrated that glycine can combine with iron to suppress hydrolysis and crossover of Fe³⁺/Fe²⁺. The results indicated that an energy efficiency of 86.66 % can be obtained at 40 mA cm⁻² and the battery can run stably for more than 100 cycles. Furthermore, a low‐cost porous membrane was employed to lower the capital cost to less than $ 50 per kWh, which was the lowest value that has ever been reported. Combining the features of low cost, high energy density and high energy efficiency, the neutral zinc–iron FB is a promising candidate for stationary energy‐storage applications.     

Radical Compatibility with Nonaqueous Electrolytes and Its Impact on an All‐Organic Redox Flow Battery

Nonaqueous redox flow batteries hold the promise of achieving higher energy density because of the broader voltage window than aqueous systems, but their current performance is limited by low redox material concentration, cell efficiency, cycling stability, and current density. We report a new nonaqueous all‐organic flow battery based on high concentrations of redox materials, which shows significant, comprehensive improvement in flow battery performance. A mechanistic electron spin resonance study reveals that the choice of supporting electrolytes greatly affects the chemical stability of the charged radical species especially the negative side radical anion, which dominates the cycling stability of these flow cells. This finding not only increases our fundamental understanding of performance degradation in flow batteries using radical‐based redox species, but also offers insights toward rational electrolyte optimization for improving the cycling stability of these flow batteries.     

Characterization and evaluation of commercial poly (vinylidene fluoride)‐g‐sulfonatedPolystyrene as proton exchange membrane

The possibility of developing low‐cost commercial grafted and sulfonated Poly(vinylidene fluoride) (PVDF‐g‐PSSA) membranes as proton exchange membranes for fuel cell applications have been investigated. PVDF‐g‐PSSA membranes were systematically prepared and examined with the focus of understanding how the polymer microstructure (degree of grafting and sulfonation, ion‐exchange capacity, etc) affects their methanol permeability, water uptake, and proton conductivity. Fourier transform infrared spectroscopy was used to characterize the changes of the membrane's microstructure after grafting and sulfonation. The results showed that the PVDF‐g‐PSSA membranes exhibited good thermal stability and lower methanol permeability. The proton conductivity of PVDF‐g‐PSSA membranes was also measured by the electrochemical impedance spectroscopy method. It was found that the proton conductivity of PVDF‐g‐PSSA membranes depends on the degree of sulfonation. All the sulfonated membranes show high proton conductivity at 92°C, in the range of 27 to 235 mScm⁻¹, which is much higher than that of Nafion212 (102 mScm⁻¹ at 80°C). The results indicated that the PVDF‐g‐PSSA membranes are particularly promising membranes to be used as polymer electrolyte membranes due to their excellent stability, low methanol permeability, and high proton conductivity.