DNA aptamer folding on gold nanoparticles: from colloid chemistry to biosensors

We have investigated the effect of the folding of DNA aptamers on the colloidal stability of gold nanoparticles (AuNPs) to which an aptamer is tethered. On the basis of the studies of two different aptamers (adenosine aptamer and K+ aptamer), we discovered a unique colloidal stabilization effect associated with aptamer folding: AuNPs to which folded aptamer structures are attached are more stable toward salt-induced aggregation than those tethered to unfolded aptamers. This colloidal stabilization effect is more significant when a DNA spacer was incorporated between AuNP and the aptamer or when lower aptamer surface graft densities were used. The conformation that aptamers adopt on the surface appears to be a key factor that determines the relative stability of different AuNPs. Dynamic light scattering experiments revealed that the sizes of AuNPs modified with folded aptamers were larger than those of AuNPs modified with unfolded (but largely collapsed) aptamers in salt solution. From both the electrostatic and steric stabilization points of view, the folded aptamers that are more extended from the surface have a higher stabilization effect on AuNP than the unfolded aptamers. On the basis of this unique phenomenon, colorimetric biosensors have been developed for the detection of adenosine, K+, adenosine deaminase, and its inhibitors. Moreover, distinct AuNP aggregation and redispersion stages can be readily operated by controlling aptamer folding and unfolding states with the addition of adenosine and adenosine deaminase.     

Designing nanomaterial-enhanced electrochemical immunosensors for cancer biomarker proteins

Detection of multiple cancer biomarker proteins in human serum and tissue at point-of-care is a viable approach for early cancer detection, but presents a major challenge to bioanalytical device development. This article reviews recent approaches developed in our laboratories combining nanoparticle decorated electrodes and multilabeled secondary antibody labeled particles to achieve high sensitivity for the detection of cancer biomarker proteins. Two nanomaterial-based sensor platforms were used: (a) upright single wall carbon nanotube forests and (b) layers of densely packed 5 nm gold nanoparticles. Both platforms feature pendant carboxylate groups for easy attachment of enzymes or antibodies by amidization. In quality performance tests, the biocatalytic responses for determination of hydrogen peroxide of AuNP layers with attached horseradish peroxidase (HRP) on electrodes gave somewhat better detection limit and sensitivity than single wall carbon nanotube (SWNT) forest platforms with HRP attached. Evaluation of these sensors as platforms for sandwich immunoassays for cancer biomarker prostate specific antigen (PSA) in serum showed that both approaches gave accurate results for human serum samples from cancer patients. The best detection limit (0.5 pg mL^− 1) and sensitivity were obtained by combining the AuNP immunosensors with binding of 1 μm diameter magnetic particles decorated with secondary antibodies and 7500 HRP labels.     

Near‐Infrared Afterglow Semiconducting Nano‐Polycomplexes for the Multiplex Differentiation of Cancer Exosomes

The detection of exosomes is promising for the early diagnosis of cancer. However, the development of suitable optical sensors remains challenging. We have developed the first luminescent nanosensor for the multiplex differentiation of cancer exosomes that bypasses real‐time light excitation. The sensor is composed of a near‐infrared semiconducting polyelectrolyte (ASPN) that forms a complex with a quencher‐tagged aptamer. The afterglow signal of the nanocomplex (ASPNC), being initially quenched, is turned on in the presence of aptamer‐targeted exosomes. Because detection of the afterglow takes place after the excitation, background signals are minimized, leading to an improved limit of detection that is nearly two orders of magnitude lower than that of fluorescence detection in cell culture media. Also, ASPNC can be easily tailored to detect different exosomal proteins by changing the aptamer sequence. This enables an orthogonal analysis of multiple exosome samples, potentially permitting an accurate identification of the cellular origin of exosomes for cancer diagnosis.     

Dual-polarization interferometry for quantification of small molecules using aptamers

An interferometry-based method was developed for detection of a small molecule, argininamide. The quantification of argininamide was demonstrated using aptamers immobilized on silicone oxynitride sensor surface via avidin–biotin binding. The aptamers formed a thin film over avidin layer corresponding to a thickness of 1.2 nm, consistent with a molecular positioning of multipoint attachment to the surface. The binding of argininamide did not cause any significant changes in the thickness of the aptamer film, suggesting that the specific binding did not affect the overall conformation of the aptamer molecules after adaptive rearrangement of aptamer molecules. However, the binding results in clearly detectable changes in mass calculated from multiple parameters determined by mass deposition and structural changes. The limit of detection of the developed sensor was determined to be 5 μM. The sensor can monitor real-time changes in argininamide concentrations with high reliability and sensitivity. The model system demonstrated that a combined measurement considering structural and mass changes through interferometry-based techniques can overcome one of the major problems associated with real-time monitoring of small mass analytes.     

Self‐Assembled Aptamer‐Based Drug Carriers for Bispecific Cytotoxicity to Cancer Cells

Monovalent aptamers can deliver drugs to target cells by specific recognition. However, different cancer subtypes are distinguished by heterogeneous biomarkers and one single aptamer is unable to recognize all clinical samples from different patients with even the same type of cancers. To address heterogeneity among cancer subtypes for targeted drug delivery, as a model, we developed a drug carrier with a broader recognition range of cancer subtypes. This carrier, sgc8c‐sgd5a (SD), was self‐assembled from two modified monovalent aptamers. It showed bispecific recognition abilities to target cells in cell mixtures; thus broadening the recognition capabilities of its parent aptamers. The self‐assembly of SD simultaneously formed multiple drug loading sites for the anticancer drug doxorubicin (Dox). The Dox‐loaded SD (SD–Dox) also showed bispecific abilities for target cell binding and drug delivery. Most importantly, SD–Dox induced bispecific cytotoxicity in target cells in cell mixtures. Therefore, by broadening the otherwise limited recognition capabilities of monovalent aptamers, bispecific aptamer‐based drug carriers would facilitate aptamer applications for clinically heterogeneous cancer subtypes that respond to the same cancer therapy.     

Effect of the immobilisation of DNA aptamers on the detection of thrombin by means of surface plasmon resonance

We report a multichannel surface plasmon resonance (SPR) sensor for detection of thrombin via DNA aptamers immobilized on the SPR sensor surface. A detailed investigation of the effect of the immobilisation method on the interaction between thrombin and DNA aptamers is presented. Three basic approaches to the immobilisation of aptamers on the surface of the SPR sensor are examined: (i) immobilisation based on chemisorption of aptamers modified with SH groups, (ii) immobilisation of biotin-tagged aptamers via previously immobilized avidin, neutravidin or streptavidin molecular linkers, and (iii) immobilisation employing dendrimers as a support layer for subsequent immobilisation of aptamers. A level of nonspecific binding of thrombin to immobilized human serum albumin (HSA) for each of the immobilisation methods is determined. Immobilisation of aptamers by means of the streptavidin–biotin system yields the best results both in terms of sensor specificity and sensitivity.     

Multifunctional G‐Quadruplex Aptamers and Their Application to Protein Detection

Two significant G‐quadruplex aptamers named AGRO100 and T30695 are identified as multifunctional aptamers that can bind the protein ligands nucleolin or HIV‐1 integrase and hemin. Besides their strong binding to target proteins, both AGRO100 and T30695 exhibit high hemin‐binding affinities comparable to that of the known aptamer (termed PS2M) selected by the in vitro evolution process. Most importantly, their corresponding hemin–DNA complexes reveal excellent peroxidase‐like activities, higher than that of the reported hemin–PS2M DNAzyme. This enables these multifunctional aptamers to be applied to the sensitive detection of proteins, which is demonstrated by applying AGRO100 to the chemiluminescence detection of nucleolin expressed at the surface of HeLa cells. Based on the specific AGRO100–nucleolin interaction, the surface‐expressed nucleolin of HeLa cells is labeled in situ with the hemin–AGRO100 DNAzyme, and then determined in the luminol–H₂O₂ system. Through this approach, the sensitive detection of total nucleolin expressed at the surface of about 6000 HeLa cells is accomplished. Our results suggest that exploiting new functions of existing aptamers will help to extend their potential applications in the biochemical field.     

Acoustic quantification of ATP using a quartz crystal microbalance with dissipation

A quartz crystal microbalance with a dissipation monitoring (QCM-D) sensor was developed for highly sensitive and specific detection of adenosine-5'-triphosphate (ATP) by using an aptamer. The binding of ATP molecules on the aptamer films could be calculated as accurate mass changes using multiple frequency and dissipation measurements. The detection is achieved by calculating the mass changes from conformational rearrangements of the sensor surface upon interaction with the target. The sensor was demonstrated to respond to changes in ATP concentrations in real time suitable for continuous monitoring applications. This sensor showed excellent selectivity toward ATP compared with other chemically similar nucleotide GTP. The feasibility of the sensor was demonstrated by analyzing ATP concentrations in cell culture media with serum. The maximum frequency change was about -2 Hz after injection of 500 μM ATP. The affinity constant of the aptamer was determined to be 49 ± 7.59 μM. The proposed sensor can extend the application of the QCM-D system in medical diagnosis, and could be adopted for the detection of other small molecules with the use of specific aptamers.     

Development of a CD63 Aptamer for Efficient Cancer Immunochemistry and Immunoaffinity-Based Exosome Isolation

CD63, a member of transmembrane-4-superfamily of tetraspanin proteins and a highly N-glycosylated type III lysosomal membrane protein, is known to regulate malignancy of various types of cancers such as melanoma and breast cancer and serves as a potential marker for cancer detection. Recently, its important role as a classic exosome marker was also emphasized. In this work, via using a magnetic bead-based competitive SELEX (systematic evolution of ligands by exponential enrichment) procedure and introducing a 0.5 M NaCl as elution buffer, we identified two DNA aptamers (CD63-1 and CD63-2) with high affinity and specificity to CD63 protein (K_d = 38.71 nM and 78.43, respectively). Furthermore, CD63-1 was found to be efficient in binding CD63 positive cells, including breast cancer MDA-MB-231 cells and CD63-overexpressed HEK293T cells, with a medium binding affinity (K_d ~ 100 nM) as assessed by flow cytometry. When immunostaining assay was performed using clinical breast cancer biopsy, the CD63-1 aptamer demonstrated a comparable diagnostic efficacy for CD63 positive breast cancer with commercial antibodies. After developing a magnetic bead-based exosome immunoaffinity separation system using CD63-1 aptamer, it was found that this bead-based system could effectively isolate exosomes from both MDA-MB-231 and HT29 cell culture medium. Importantly, the introduction of the NaCl elution in this work enabled the isolation of native exosomes via a simple 0.5M NaCl incubation step. Based on these results, we firmly believe that the developed aptamers could be useful towards efficient isolation of native state exosomes from clinical samples and various theranostic applications for CD63-positive cancers.     

不同金属/适配体双功能复合磁性纳米材料的制备及其对外泌体的富集性能

外泌体作为一种细胞外囊泡,其内容物可以反映亲代细胞的重要信息,而自身也具有独特的结构,能够执行特征的生物学功能。基于外泌体的表面化学和生物学特征,制备了不同类型的金属/适配体(Apt)双功能复合磁性纳米材料,并将其应用于外泌体的富集纯化。将适配体和外泌体表面目标膜蛋白的特异性结合性能与以钛、锆为代表的金属氧化物和外泌体磷脂双层膜的特异性亲和作用结合,可极大地提高分离材料对外泌体的分离选择性和富集容量。分别以Fe₃O₄@Zr-MOFs、Fe₃O₄@Zr-Ti-MOFs和Fe₃O₄@TiO₂等金属有机框架(MOFs)/金属氧化物磁性纳米材料为基底,制备对应的双功能MOFs/金属氧化物-适配体复合磁性纳米材料Fe₃O₄@Zr-MOFs-Apt、Fe₃O₄@Zr-Ti-MOFs-Apt和Fe₃O₄@TiO₂-Apt,并进一步对不同材料的外泌体富集性能加以评价。以超速离心法提取的模型外泌体以及尿液为样品,对修饰相同质量适配体和不同含量金属氧化物的双功能材料的富集性能加以对比。将3种双功能磁性纳米材料应用于尿液外泌体的富集,得到的外泌体裂解后经质谱鉴定,分别得到233、343和832个外泌体蛋白。这一结果也表明双功能磁性纳米材料可以充分结合核酸适配体亲和的高选择性和金属氧化物的高富集容量优势,对于复杂生物样品中外泌体的快速、高效分离纯化具有潜在的应用价值,而针对材料制备和分离纯化方法的设计也为新型外泌体富集材料的设计提供了一条可行的新思路。     

On-chip graphene oxide aptasensor for multiple protein detection

The versatility of an on-chip graphene oxide (GO) aptasensor was successfully confirmed by the detection of three different proteins, namely, thrombin (TB), prostate specific antigen (PSA), and hemagglutinin (HA), simply by changing the aptamers but with the sensor composition remaining the same. The results indicate that both DNA and RNA aptamers immobilized on the GO surface are sufficiently active to realize an on-chip aptasensor. Molecular selectivity and concentration dependence were investigated in relation to TB and PSA detection by using a dual, triple, and quintuple microchannel configuration. The multiple target detection of TB and PSA on a single chip was also demonstrated by using a 2 × 3 linear-array GO aptasensor. This work enables us to apply this sensor to the development of a multicomponent analysis system for a wide variety of targets by choosing appropriate aptamers.     

DNA Dangling‐End‐Induced Colloidal Stabilization of Gold Nanoparticles for Colorimetric Single‐Nucleotide Polymorphism Genotyping

A single‐nucleotide polymorphism (SNP) detection method was developed by combining single‐base primer extension and salt‐induced aggregation of gold nanoparticles densely functionalized with double‐stranded DNA (dsDNA‐AuNP). The dsDNA‐AuNPs undergo rapid aggregation in a medium of high ionic strength, whereas particles having a single‐base protrusion at the outermost surface disperse stably, allowing detection of a single‐base difference in length by color changes. When SNP typing primers are used as analytes to hybridize to the single‐stranded DNA on the AuNP surface, the resulting dsDNA‐AuNP works as a visual indicator of single‐base extension. A set of four extension reaction mixtures is prepared using each of ddNTPs and subsequently subjected to the aggregation assay. Three mixtures involving ddNTP that is not complementary to the SNP site in the target produce the aggregates that exhibit a purple color. In contrast, one mixture with the complementary ddNTP generates the single‐base protrusion and appears red. This method could potentially be used in clinical diagnostics for personalized medicine.     

In vivo Fluorescence Imaging of Tumors using Molecular Aptamers Generated by Cell‐SELEX

Poor sensitivity and low specificity of current molecular imaging probes limit their application in clinical settings. To address these challenges, we used a process known as cell‐SELEX to develop unique molecular probes termed aptamers with the high binding affinity, sensitivity, and specificity needed for in vivo molecular imaging inside living animals. Importantly, aptamers can be selected by cell‐SELEX to recognize target cells, or even surface membrane proteins, without requiring prior molecular signature information. As a result, we are able to present the first report of aptamers molecularly engineered with signaling molecules and optimized for the fluorescence imaging of specific tumor cells inside a mouse. Using a Cy5‐labeled aptamer TD05 (Cy5‐TD05) as the probe, the in vivo efficacy of aptamer‐based molecular imaging in Ramos (B‐cell lymphoma) xenograft nude mice was tested. After intravenous injection of Cy5‐TD05 into mice bearing grafted tumors, noninvasive, whole‐body fluorescence imaging then allowed the spatial and temporal distribution to be directly monitored. Our results demonstrate that the aptamers could effectively recognize tumors with high sensitivity and specificity, thus establishing the efficacy of these fluorescent aptamers for diagnostic applications and in vivo studies requiring real‐time molecular imaging.     

Selection of DNA Aptamers with Affinity for Pro-gastrin-Releasing Peptide (proGRP), a Tumor Marker for Small Cell Lung Cancer

Aptamers are single-strand oligonucleotides that are generated by the systemic evolution of ligands by exponential enrichment (SELEX) technique and that can bind to target molecules specifically. However, only a few aptamers have been developed to date against tumor markers. To utilize aptamers for tumor diagnosis, a variety of aptamers are required. Here, a single-stranded DNA aptamer specific for pro-gastrin-releasing peptide (proGRP), a marker for small cell lung cancer, was selected using SELEX. After selection, identical sequences were found in the DNA library. This sequence was selected and its binding affinity to proGRP was evaluated using surface plasmon resonance.     

Binding‐Induced DNA Nanomachines Triggered by Proteins and Nucleic Acids

We introduce the concept and operation of a binding‐induced DNA nanomachine that can be activated by proteins and nucleic acids. This new type of nanomachine harnesses specific target binding to trigger assembly of separate DNA components that are otherwise unable to spontaneously assemble. Three‐dimensional DNA tracks of high density are constructed on gold nanoparticles functionalized with hundreds of single‐stranded oligonucleotides and tens of an affinity ligand. A DNA swing arm, free in solution, is linked to a second affinity ligand. Binding of a target molecule to the two ligands brings the swing arm to AuNP and initiates autonomous, stepwise movement of the swing arm around the AuNP surface. The movement of the swing arm, powered by enzymatic cleavage of conjugated oligonucleotides, cleaves hundreds of oligonucleotides in response to a single binding event. We demonstrate three nanomachines that are specifically activated by streptavidin, platelet‐derived growth factor, and the Smallpox gene. Substituting the ligands enables the nanomachine to respond to other molecules. The new nanomachines have several unique and advantageous features over DNA nanomachines that rely on DNA self‐assembly.     

MXene–AuNP-Based Electrochemical Aptasensor for Ultra-Sensitive Detection of Chloramphenicol in Honey

A simple and label-free electrochemical aptasensor was developed for ultra-sensitive determination of chloramphenicol (CAP) based on a 2D transition of metal carbides (MXene) loaded with gold nanoparticles (AuNPs). The embedded AuNPs not only inhibit the aggregation of MXene sheets, but also improve the quantity of active sites and electronic conductivity. The aptamers (Apts) were able to immobilize on the MXene–AuNP modified electrode surface through Au–S interaction. Upon specifically binding with CAP with high affinity, the CAP–Apt complexes produced low conductivity on the aptasensor surface, leading to a decreased electrochemical signal. The resulting current change was quantitatively correlated with CAP concentration. Under optimized experimental conditions, the constructed aptasensor exhibited a good linear relationship within a wide range of 0.0001–10 nM and with a low detection limit of 0.03 pM for CAP. Moreover, the developed aptasensor has been applied to the determination of CAP concentration in honey samples with satisfactory results.     

RNA Aptamers That Reversibly Bind Photoresponsive Azobenzene‐Containing Peptides

Modulation of biological networks assembled by diverse interactions among biologically active molecules has provided a platform for innovative biotechnologies. Here, we report RNA aptamers that bind to a photoresponsive peptide (KRAzR; Lys‐Arg‐azobenzene‐Arg) containing azobenzene chromophore, which can change its structure by photoirradiation. Aptamers were identified after 10 cycles of an in vitro selection procedure starting with a DNA library containing a 70 nt random region. Surface plasmon resonance (SPR) analysis demonstrated that interactions between aptamers and KRAzR were fully controlled by appropriate photoirradiation to the SPR sensor chip. Upon irradiation of 360 nm on the KRAzR‐immobilized surface, the binding of each aptamer to the surface was significantly decreased. Subsequent photoirradiation of the same surface with 430 nm restored the aptamer binding to the surface. We also observed that direct photoirradiation of the aptamer–peptide complex on a gold surface actively promoted dissociation of the complex. Furthermore, a doped reselection method was applied to acquire structural and sequence information of aptamer 66. From a data analysis of the conserved region and the mutation frequency, we were able to select a plausible secondary structure among three candidates predicted by computational folding simulation.     

Photothermal readout of surface-arrayed proteins: attomole detection levels with gold nanoparticle visualization

Transverse photothermal beam deflection (tPBD) is used to detect and quantify proteins arrayed on slides. The slides are "read" using an argon-ion excitation source. Optical absorption cross-sections of most proteins are too small for submonolayer coverages to produce thermal gradients of sufficient magnitude for detection using tPBD. Thus, surface-arrayed proteins are stained using mercaptoalkanoic acid coated gold nanoparticles (maa-AuNP). The large optical cross-sections of AuNP combined with electrolyte-induced AuNP aggregation afford a highly sensitive method for protein detection. Following maa-AuNP staining, the tPBD signal varies linearly with the amount of protein (Neutravidin) spotted on the slide surface: from 0.001 to 1.0 monolayer of protein. In a single 0.7 mm diameter array spot, the tPBD detection limit is 33 amol of Neutravidin or fewer than 55 protein molecules per microm2. Despite the nonspecific nature of interactions between maa-AuNP and proteins, significant variations in protein staining efficacy are observed. The factors controlling staining are not elucidated in detail, but there is a correlation between protein pI and protein staining. Proteins with pI approximately 6 are more effectively visualized by maa-AuNp than are more acidic or more basic proteins. The influence of AuNP diameter and mercaptoalkanoic acid chain length on protein staining and selectivity is investigated. The results demonstrate that AuNP staining coupled with tPBD detection constitutes a sensitive and practical method for probing protein arrays.     

Sensing Protein Surfaces with Targeted Fluorescent Receptors

A methodology for creating fluorescent molecular sensors that respond to changes that occur on the surfaces of specific proteins is presented. This approach, which relies on binding cooperatively between a specific His‐tag binder and a nonspecific protein‐surface receptor, enabled the development of a sensor that can track changes on the surface of a His‐tag‐labeled calmodulin (His‐CaM) upon interacting with metal ions, small molecules, and protein binding partners. The way this approach was used to detect dephosphorylation of an unlabeled calmodulin‐dependent protein kinase II (CaMKII), and the binding of Bax BH3 to His‐tagged B‐cell lymphoma 2 (Bcl‐2) protein is also presented.     

核酸适配体在癌症诊断中的研究进展

核酸适配体是通过指数富集配体系统进化技术(SELEX)从体外合成的寡核苷酸文库中筛选得到的短的寡核苷酸分子(ssDNA或RNA).核酸适配体能够通过折叠成特定的空间结构与靶标分子进行特异性结合,与抗体相比,适配体具有高亲和力、易修饰、低成本、易于合成和低免疫原性等优势,可以针对细胞、蛋白质、组织、生长因子进行癌症生物标...