Explicit finite difference simulations for accelerating cross diffusion flow over a perpendicular shield with parabolic motion

The heat transfer phenomenon subject to thermos-diffusion effects convey important applications in the heating processes, extrusion systems, chemical processes and various engineering systems. The objective of current work is to observe the contribution of Soret and Dufour effects in oscillating shield for cross diffusion flow. The perpendicular shield with oscillating motion induced the flow. The magnitude of oscillations is assumed to be small so that laminar flow due to oscillating shield has been resulted. The motivations for addressing the thermos-diffusion phenomenon due to oscillating of shield are due to applications in oscillatory pumps, moving surface, metal detectors, power systems etc. The dimensionless problem is obtained via introducing the appropriate set of variables. The numerical outcomes are suggested by using the most interesting explicit finite difference scheme. The physical illustration for flow parameters is presented. Moreover, the aspect of physical quantities involving the flow are graphically reported.     

小波包分析用于重叠分析化学信号的处理

对小波包分析的算法进行了改进,并将此算法成功地应用于多组分重叠色谱信号的解析.结果表明,本文提出的算法解决了MRSD算法的不足,更适合处理分析化学信号,用于重叠信号的解析时不需重构(逆变换),简化了数据处理步骤,加快了数据解析速度,具有较强的解析能力.对于重叠色谱信号的解析,小波包分析比小波分析具有更强的解析能力.     

铜基催化剂的制备方法对草酸二乙酯加氢反应的影响

草酸二乙酯加氢性成乙二醇的反应过程中，所用的铜基催化剂是由Ｃｕ（ＮＯ３）２与硅溶胶凝法制得的。本文考察了该催化剂的ＴＰＲ特性，结果表明，随着催化剂中Ｃｕ／ＳｉＯ２值的增大，其ＴＰＲ主峰ＴＭ峰温有所升高，这意味着催化剂的还原温度随Ｃｕ／ＳｉＯ２值的增大而提高。用ＸＲＤ和ＸＰＳ等手段对该催化剂还原后铜的含量及价态进行了考察，表明用胶凝法制备的铜基催化剂，还原后存在Ｃｕ＾ｏ和Ｃｕ＾＋两种价态。结合活性评     

Inclined surface slip flow of nanoparticles with subject to mixed convection phenomenon: Fractional calculus applications

The interest of researchers towards the nanofluids is noticed in recent years due to leading applications in thermal systems and industrial framework. Referring to such motivations, current study explores the role of velocity slip effects for the mixed convection flow of nanofluid endorsed due to inclined surface. The Casson base fluid model for which the thermal impact needs to be improved. The analysis is observed when the role of velocity slip is important. The modeling of unsteady free convective flow problem yields partial differential system. The Atangana-Baleanu (AB) and Caputo-Fabrizio (CF) fractional operators are implemented in order to simulates the computation of problem. The graphical presentations are prepared in order to check the physical dynamic of parameters.     

Monte Carlo simulations of a coarse grained model for an athermal all-polystyrene nanocomposite system

The structure of a polystyrene matrix filled with tightly cross-linked polystyrene nanoparticles, forming an athermal nanocomposite system, is investigated by means of a Monte Carlo sampling formalism. The polymer chains are represented as random walks and the system is described through a coarse grained Hamiltonian. This approach is related to self-consistent-field theory but does not invoke a saddle point approximation and is suitable for treating large three-dimensional systems. The local structure of the polymer matrix in the vicinity of the nanoparticles is found to be different in many ways from that of the corresponding bulk, both at the segment and the chain level. The local polymer density profile near to the particle displays a maximum and the bonds develop considerable orientation parallel to the nanoparticle surface. The depletion layer thickness is also analyzed. The chains orient with their longest dimension parallel to the surface of the particles. Their intrinsic shape, as characterized by spans and principal moments of inertia, is found to be a strong function of position relative to the interface. The dispersion of many nanoparticles in the polymeric matrix leads to extension of the chains when their size is similar to the radius of the dispersed particles.     

Highly reusable chitosan-stabilized Fe-ZnO immobilized onto fiberglass cloth and the photocatalytic degradation properties in batch and loop reactors

The new design of the photocatalytic reactor is crucial to study for improving compatibility and scaling up the operation. A compatible loop photocatalytic reactor has been designed and used for rhodamine B decomposition. The photocatalysts were either ZnO or Fe-ZnO immobilized onto fiberglass cloth. The ZnO catalyst exhibited high crystallinity with or without Fe as the dopant. The crystallite size increased with the presence of Fe in the lattices. Most of the crystal parameters matched the standard ZnO data, and the cluster size was comparable to most reported studies. Diffuse Reflectance Spectroscopy (DRS) analysis confirmed the photon absorption shifted to the visible light range. The Fe dopant decreased the ZnO bandgap, and SEM-EDS confirmed the catalysts adhered to the fiberglass surface. The volume, thickness of the substrate solution, and reaction temperature influenced the photocatalytic-degradation rate. The photocatalytic degradation rate was higher under sunlight than ultraviolet irradiation. The reaction rate was lower in the batch reactor than in the loop reactor. The photocatalytic reaction almost completely mineralized RhB and changed the red solution to colorless. The immobilized photocatalyst has been reused more than 50 times without significantly decreasing the catalytic activity.     

成都经济生态区大气降尘中镉赋存形态的研究

采用Tessier连续提取法对成都经济生态区不同区域的24个大气降尘样中镉的赋存形态进行了研究。研究结果表明,大气降尘中的镉主要以残留态形态存在;各形态镉在总镉中所占百分比含量由大到小排列顺序依次是:残留态,碳酸盐结合态,交换态,铁锰结合态,有机结合态;交换态镉、碳酸盐结合态镉这两种具有较高生物有效性的形态镉在总镉中所占的平均百分比含量分别是6.420%和8.917%;铁锰氧化物结合态、有机结合态、残留态镉这三种形态镉生物有效性很低,分别在总镉中所占的平均百分比含量分别是3.419%、2.365%和78.907%。通过分析可得出,汽油和煤的燃烧以及工厂排放镉能加大城市大气降尘的镉污染。     

钴卟啉过氧中间体向环己烷夺氢的密度泛函计算

采用密度泛函理论计算方法模拟了简单钴卟啉过氧中间体PCo-O2与环己烷C6H12的作用,分析了反应路径中各驻点能量和反应过渡态分子构型。研究结果表明,PCo-O2向底物环己烷夺氢的反应可以延正方向进行,二线态PCo-O2更具反应活性,反应过程中Co-O键得到加强,O-O键被削弱。依据理论计算结果,探讨了四苯基钴卟啉催化环己烷氧化生成环己醇和环己酮的反应机理,指出反应延Lyons高价金属氧代物机理生成环己醇,而反应循环中产生的烷基自由基可以延烷基过氧化过渡金属配合物反应机理进行生成环己酮。     

Deux methodes photothermiques a l'etude d'une preparation de contact d'un melange binaire de cristaux liquides

The photopyroelectric (PPE) method is proposed as a sensitive technique to study a binary mixture of liquid crystals in a contact preparation. The photothermal signal is generated while scanning the contact preparation. The crystal-smectic A, smectic A-nematic, and nematic-isotropic interphase boundaries are detected. The displacement of these boundaries due to the variation of the temperature is monitored. The study of these displacements allows us to draw the complete temperature-concentration phase diagram of a binary mixtures. This revised version was published online in August 2006 with corrections to the Cover Date.     

水-乙醇二元体系共沸混合物的热力学研究

用全自动低温绝热量热计测定了水、乙醇以及水和乙醇组成的共沸混合物在不同温区的摩尔热容Cp,m. 建立了共沸混合物Cp,m与温度T的函数关系.结果表明,水和乙醇组成的共沸混合物在98.496 K发生玻璃态转化,在158.939 K 和270.95 K发生固-液相变.获得了其相应的相变焓和相变熵.计算了以298.15 K为基准的该共沸混合物的热力学函数和超额热力学函数.     

On kinetics of microemulsion copolymerization of butyl acrylate and acrylonitrile

The oil-in-water microemulsion copolymerizations of butyl acrylate and acrylonitrile initiated by water (ammonium peroxodisulfate, AP)—and oil (dibenzoyl peroxide, DBP)—soluble radical initiators were investigated. Copolymerizations show two distinct nonstationary rate regions. The maximum rate of polymerization is found to be proportional to the 0.48th and 0.65th power of the AP and DBP concentration, respectively. The rate per particle is found to be proportional to the 0.05th and 0.2nd power of the AP and DBP concentration, respectively. The rate of polymerization decreases with increasing the acrylonitrile concentration. The number of particle increases with increasing conversion up to 50–70%. The number-average molecular weight increases with conversion up to ca. 20% and then decreases. The number-average molecular weights were found to decrease with increasing the concentration of both initiator and acrylonitrile. The experimental results were discussed in terms of the water-phase polymerization, the chain-transfer and radical desorption events, the particle nucleation during the whole polymerization, and recruiting monomer and emulsifier from the free monomer-swollen emulsifier micelles. © 1996 John Wiley & Sons, Inc.     

Determination of Herbicide Difenzoquat Methyl Sulfate in Citruses and Baby Juices by Kinetic‐Spectrophotometric Method and HPLC Method

The purpose of this paper is to present a new kinetic‐spectrophotometric method which involve inexpensive equipment and which can be applied by all analyst who have to determine difenzoquate methyl sulfate (DFQ) residues in citruses and baby juices. The method is based on the inhibited effect of DFQ on the oxidation of sulfanile acid (SA) by hydrogen peroxide in phosphate buffer in presence Cu(II) ion. The reaction was monitored spectrophotometrically by measuring the increase in absorbance of the reaction product at 370 nm. The proposed inhibited method permits determination of DFQ over the range 0.36 to 1.80 μg/mL and 1.80 to 7.20 μg/mL, with quantification limit of 0.184 μg/mL. The relative standard deviations are 0.73‐2.90% for the concentration interval of DFQ 1.80‐0.36 μg/mL. The method was successfully applied to determination of DFQ residues in citruses and baby juices. The HPLC method is used to verify the results. The results obtained for the same samples by the two methods are quite comparable.     

Design of a portable gas chromatography with a conducting polymer nanocomposite detector device and a method to analyze a gas mixture

A portable chromatography device and a method were developed to analyze a gas mixture. The device comprises a chromatographic column for separating components of a sample of the gas mixture. It has an air pump coupled to the inlet of a chromatographic column for pumping air and an injector coupled to the inlet of chromatographic column for feeding the sample using the air as a carrier gas. A detector is arranged downstream from and coupled to the outlet of the chromatographic column. The detector is a nanostructure semiconductive microfiber. The device further comprises an evaluation unit arranged and configured to evaluate each detected component to determine the concentration. The designed portable system was used for simultaneous detection of amines. The possibility of applying dispersive liquid–liquid microextraction for the determination of analytes in trace levels is demonstrated. The reproducibility of this method is acceptable, and good standard deviations were obtained. The relative standard deviation value is less than 6% for all analytes. Finally, the method was successfully applied to the extraction and determination of analytes in water samples.     

工业丙烯腈中噁唑及其它有机杂质的气相色谱分析

提出了一种用毛细管气相色谱分析工业丙烯腈中微量噁唑及其它杂质的方法。用气相色谱．质谱法对丙烯腈中的噁唑及其它杂质进行了定性,并用化学法验证了噁唑的定性结果。采用有效碳数法计算出噁唑的质量相对校正因子为2．396,内标法测定了国内不同公司生产的丙烯腈中微量杂质的含量。其中噁唑的质量含量为0．001％-0．06％。方法已在某石化公司丙烯腈装置技术改造中应用于噁唑含量的控制分析。     

Frontal polymerization synthesis of starch-grafted hydrogels: Effect of temperature and tube size on propagating front and properties of hydrogels

The frontal polymerization process was used to produce superabsorbent hydrogels based on acrylic acid monomers grafted onto starch. Using a simple test tube which was nonadiabatic and permitted contact with air, the effects of initial temperature and tube size on the propagating front of grafting copolymerization and the properties of hydrogels were explored. The unrestricted access of the reaction mixture to oxygen delayed the formation of self-propagating polymerization front. The ignition time was markedly lengthened with the increasing of tube size attributed to the formation of large amounts of peroxy radicals. The front velocity dependence on initial temperature could be fit to an Arrhenius function with the average apparent activation energy of 24 kJ mol(-1), and on tube size to a function of higher order. The increase of the initial temperature increased the front temperature, which lead to more soluble oligomers and higher degree of crosslinking. The interplay of two opposite effects of oligomer and crosslinking determined the sol and gel content. An increase in tube size had two effects on the propagating front. One was to reduce heat loss. The other effect was to increase the number of escaping gas bubbles. The combined action of the two effects resulted in a maximum value of front temperature, an increase in sol content and a reduction in gel content with tube size. The highest swelling capacity of hydrogels was obtained when the initial temperature or tube size favored a formation of porous microstructure of hydrogels.     

Study on the Formation Mechanism of Oxygen-containing Groups on the Surfaces of Hypercrosslinked Polystyrenes

Davankov and Tsyurupa described a new series of hypercrosslinked polymeric networks in 19691. Owing to their high internal surface area, unique porosity, and excellent swelling feature, hypercrosslinked polymers have exhibited a good adsorption affinity t…     

Hybridized particle swarm algorithm for adaptive structure training of multilayer feed-forward neural network: QSAR studies of bioactivity of organic compounds

The multilayer feed-forward ANN is an important modeling technique used in QSAR studying. The training of ANN is usually carried out only to optimize the weights of the neural network and without paying attention to the network topology. Some other strategies used to train ANN are, first, to discover an optimum structure of the network, and then to find weights for an already defined structure. These methods tend to converge to local optima, and may also lead to overfitting. In this article, a hybridized particle swarm optimization (PSO) approach was applied to the neural network structure training (HPSONN). The continuous version of PSO was used for the weight training of ANN, and the modified discrete PSO was applied to find appropriate the network architecture. The network structure and connectivity are trained simultaneously. The two versions of PSO can jointly search the global optimal ANN architecture and weights. A new objective function is formulated to determine the appropriate network architecture and optimum value of the weights. The proposed HPSONN algorithm was used to predict carcinogenic potency of aromatic amines and biological activity of a series of distamycin and distamycin-like derivatives. The results were compared to those obtained by PSO and GA training in which the network architecture was kept fixed. The comparison demonstrated that the HPSONN is a useful tool for training ANN, which converges quickly towards the optimal position, and can avoid overfitting in some extent.     

Variable chemical species and thermo-diffusion Darcy–Forchheimer squeezed flow of Jeffrey nanofluid in horizontal channel with viscous dissipation effects

This research communicates the applications of thermos-diffusion effect associated to the squeezing flow of Jeffrey nanofluid due to horizontal channel. The problem presents the applications of inertial effects by following the Darcy–Forchheimer flow. Moreover, the effects of viscous dissipation and activation energy phenomenon has been discussed. The dimensionless attention of problem is retained. The shooting technique is implemented to present the numerical computations. The numerical validation of results is reported. The essential assessment of physical flow parameters is studied. The numerical outcomes are presented for heat and mass transfer phenomenon. It is observed that presence of inertial forces control to velocity flow in the regime. The enhancing contribution of thermal and concentration rate is noted for inertial constant.     

The viscosity of aqueous electrolyte solutions and the TTG model

An equation covering the dynamic viscosity from zero to high concentrations has been derived on the basis of the TTG model. The equation is compatible with the Eyring andNMR theories and has a similar form to the Othmer-rule equation. A component of the limiting viscosity slope is shown to be proportional to the Falkenhagen slope. The TTG equation was tested for 20 electrolytes of diverse charge type and found to fit the data within the experimental errors. The equation is simply extended to cover pressure, temperature, and component changes. The viscosities of three multicomponent systems are predicted to within the experimental errors. The derived parameters of the equation were found to be simply related to the TTG volume of the solute.     

Optimization of non-linear calibration graphs as applied to an enzymatic assay of pyridostigmine

The enzymatic method for the determination of pyridostigmine in body fluids was investigated in order to optimize the various parameters that affect the calibration graphs. Six variables were optimized, each with respect to three criteria of optimization. The optimum values were found to be different for aqueous and plasma calibration graphs, but the differences are only slight. The former, roughly calculated, values of the variables were found to be fairly satisfactory. The suggested graphical method for optimization was found to be very helpful.