Tuning the Stacking Modes of Ultrathin Two-Dimensional Metal–Organic Framework Nanosheet Membranes for Highly Efficient Hydrogen Separation

Two-dimensional (2D) metal–organic framework (MOF) membranes are considered potential gas separation membranes of the next generation due to their structural diversity and geometrical functionality. However, achieving a rational structure design for a 2D MOF membrane and understanding the impact of MOF nanosheet stacking modes on membrane separation performance remain challenging tasks. Here, we report a novel kind of 2D MOF membrane based on [Cu₂Br(IN)₂]_n (IN=isonicotinato) nanosheets and propose that synergetic stacking modes of nanosheets have a significant influence on gas separation performance. The stacking of the 2D MOF nanosheets is controlled by solvent droplet dynamic behaviors at different temperatures of drop coating. Our 2D MOF nanosheet membranes exhibit high gas separation performances for H₂/CH₄ (selectivity >290 with H₂ permeance >520 GPU) and H₂/CO₂ (selectivity >190 with H₂ permeance >590 GPU) surpassing the Robeson upper bounds, paving a potential way for eco-friendly H₂ separation.     

Fabrication of Ultrathin Membranes Using 2D-MOF Nanosheets for Tunable Gas Separation

Two-dimensional (2D) metal-organic frameworks (MOF) nanosheets have emerged as novel membrane materials for gas separation. However, the development of ultrathin MOF membranes with tunable separation performances is still a challenge. Herein, we developed a facile GO-assisted restacking method to fabricate defect-free membranes with monolayer Zr-BTB nanosheets. Obtained ultrathin membranes ranging from 130 nm to 320 nm show tunable separation performances and exceed the 2008 Robeson upper bound by changing the amount of nanolayers in vertical stacking direction. Furthermore, a heating filtration method was used to change the restacking process of nanosheets in the horizontal direction. As a result, H₂/CO₂ selectivity can be enhanced by two times with the same membrane thickness (130 nm) and H₂ permeance is almost maintained to be 7.0×10⁻⁷ mol m⁻² s⁻¹ pa⁻¹. This method may provide a possible way to efficiently tune the gas separation performances of MOF membranes.     

Two‐Dimensional Co@N‐Carbon Nanocomposites Facilely Derived from Metal–Organic Framework Nanosheets for Efficient Bifunctional Electrocatalysis

Metal–organic frameworks (MOFs) and MOF‐derived nanomaterials have recently attracted great interest as highly efficient, non‐noble‐metal catalysts. In particular, two‐dimensional MOF nanosheet materials possess the advantages of both 2D layered nanomaterials and MOFs and are considered to be promising nanomaterials. Herein, we report a facile and scalable in situ hydrothermal synthesis of Co–hypoxanthine (HPA) MOF nanosheets, which were then directly carbonized to prepare uniform Co@N‐Carbon nanosheets for efficient bifunctional electrocatalytic hydrogen‐evolution reactions (HERs) and oxygen‐evolution reactions (OERs). The Co embedded in N‐doped carbon shows excellent and stable catalytic performance for bifunctional electrocatalytic OERs and HERs. For OERs, the overpotential of Co@N‐Carbon at 10 mA cm^?2 was 400 mV (vs. reversible hydrogen electrode, RHE). The current density of Co@N‐Carbon reached 100 mA cm^?2 at an overpotential of 560 mV, which showed much better performance than RuO₂; the largest current density of RuO₂ that could be reached was only 44 mA cm^?2. The Tafel slope of Co@N‐Carbon was 61 mV dec^?1, which is comparable to that of commercial RuO₂ (58 mV dec^?1). The excellent electrocatalytic properties can be attributed to the nanosheet structure and well‐dispersed carbon‐encapsulated Co, CoN nanoparticles, and N‐dopant sites, which provided high conductivity and a large number of accessible active sites. The results highlight the great potential of utilizing MOF nanosheet materials as promising templates for the preparation of 2D Co@N‐Carbon materials for electrocatalysis and will pave the way to the development of more efficient 2D nanomaterials for various catalytic applications.     

Water Transport with Ultralow Friction through Partially Exfoliated g‐C3N4 Nanosheet Membranes with Self‐Supporting Spacers

Two‐dimensional (2D) graphitic carbon nitride (g‐C₃N₄) nanosheets show brilliant application potential in numerous fields. Herein, a membrane with artificial nanopores and self‐supporting spacers was fabricated by assembly of 2D g‐C₃N₄ nanosheets in a stack with elaborate structures. In water purification the g‐C₃N₄ membrane shows a better separation performance than commercial membranes. The g‐C₃N₄ membrane has a water permeance of 29 L m⁻² h⁻¹ bar⁻¹ and a rejection rate of 87 % for 3 nm molecules with a membrane thickness of 160 nm. The artificial nanopores in the g‐C₃N₄ nanosheets and the spacers between the partially exfoliated g‐C₃N₄ nanosheets provide nanochannels for water transport while bigger molecules are retained. The self‐supported nanochannels in the g‐C₃N₄ membrane are very stable and rigid enough to resist environmental challenges, such as changes to pH and pressure conditions. Permeation experiments and molecular dynamics simulations indicate that a novel nanofluidics phenomenon takes place, whereby water transport through the g‐C₃N₄ nanosheet membrane occurs with ultralow friction. The findings provide new understanding of fluidics in nanochannels and illuminate a fabrication method by which rigid nanochannels may be obtained for applications in complex or harsh environments.     

Formation of Ultrathin,Continuous Metal–Organic Framework Membranes on Flexible Polymer Substrates

Metal–organic framework (MOF) materials have an enormous potential in separation applications, but to realize their potential as semipermeable membranes they need to be assembled into thin continuous macroscopic films for fabrication into devices. By using a facile immersion technique, we prepared ultrathin, continuous zeolitic imidazolate framework (ZIF‐8) membranes on titania‐functionalized porous polymeric supports. The coherent ZIF‐8 layer was surprisingly flexible and adhered well to the support, and the composite membrane could sustain bending and elongation. The membranes exhibited molecular sieving behavior, close to the theoretical permeability of ZIF‐8, with hydrogen permeance up to 201×10⁻⁷ mol m⁻² s⁻¹ Pa⁻¹ and an ideal H₂/CO₂ selectivity of 7:1. This approach offers significant opportunities to exploit the unique properties of MOFs in the fabrication of separation and sensing devices.     

β‐Co(OH)2 Nanosheets: A Superior Pseudocapacitive Electrode for High‐Energy Supercapacitors

In this work, β‐Co(OH)₂ nanosheets are explored as efficient pseudocapacitive materials for the fabrication of 1.6 V class high‐energy supercapacitors in asymmetric fashion. The as‐synthesized β‐Co(OH)₂ nanosheets displayed an excellent electrochemical performance owing to their unique structure, morphology, and reversible reaction kinetics (fast faradic reaction) in both the three‐electrode and asymmetric configuration (with activated carbon, AC). For example, in the three‐electrode set‐up, β‐Co(OH)₂ exhibits a high specific capacitance of ∼675 F g⁻¹ at a scan rate of 1 mV s⁻¹. In the asymmetric supercapacitor, the β‐Co(OH)₂∥AC cell delivers a maximum energy density of 37.3 Wh kg⁻¹ at a power density of 800 W kg⁻¹. Even at harsh conditions (8 kW kg⁻¹), an energy density of 15.64 Wh kg⁻¹ is registered for the β‐Co(OH)₂∥AC assembly. Such an impressive performance of β‐Co(OH)₂ nanosheets in the asymmetric configuration reveals the emergence of pseudocapacitive electrodes towards the fabrication of high‐energy electrochemical charge storage systems.     

Rational Tuning of Zirconium Metal–Organic Framework Membranes for Hydrogen Purification

The effect of organic ligands on the separation performance of Zr based metal–organic framework (Zr‐MOF) membranes was investigated. A series of Zr‐MOF membranes with different ligand chemistry and functionality were synthesized by an in situ solvothermal method and a coordination modulation technique. The thin supported MOF layers (ca. 1 μm) showed the crystallographic orientation and pore structure of original MOF structures. The MOF membranes show excellent selectivity towards hydrogen owing to the molecular sieving effect when the bulkier linkers were used. The molecular simulation confirmed that the constricted pore apertures of the Zr‐MOFs which were formed by the additional benzene rings lead to the decrease in the diffusivity of larger penetrants while hydrogen was not remarkably affected. The gas mixture separation factors of the MOF membranes reached to H₂/CO₂=26, H₂/N₂=13, H₂/CH₄=11.     

Microwave‐Assisted Hydrothermal Synthesis of [Al(OH)(1,4‐NDC)] Membranes with Superior Separation Performances

In this study, we report a facile ligand‐assisted in situ hydrothermal approach for preparation of compact [Al(OH)(1,4‐NDC)] (1,4‐NDC=1,4‐naphthalenedicarboxylate) MOF membranes on porous γ‐Al₂O₃ substrates, which also served as the Al³⁺ source of MOF membranes. Simultaneously, it was observed that the heating mode exerted significant influence on the final microstructure and separation performance of [Al(OH)(1,4‐NDC)] membranes. Compared with the conventional hydrothermal method, the employment of microwave heating led to the formation of [Al(OH)(1,4‐NDC)] membranes composed of closely packed nanorods with superior H₂/CH₄ selectivity.     

Anisotropic Gas Separation in Oriented ZIF-95 Membranes Prepared by Vapor-Assisted In-Plane Epitaxial Growth

Control of the microstructure grain orientation, grain boundaries and thickness are crucial for MOF membranes. We report a novel synthesis strategy to prepare highly c-oriented ZIF-95 membranes through vapor-assisted in-plane epitaxial growth. In a mixed DMF/water vapor atmosphere, in-plane epitaxial growth of a ZIF-95 seeds layer was achieved to obtain an oriented and well-intergrown ZIF-95 membrane with a thickness of only 600 nm. Demonstrated by both experimental and simulation studies, the c-oriented ZIF-95 membrane displayed superior separation performance because a perfectly oriented structure resulted in a notable reduction of intercrystalline defects and transport pathways. For the separation of equimolar binary mixtures at 100 °C and 1 bar, the mixture separation factors of H₂/CO₂ and H₂/CH₄ were 32.2 and 53.7, respectively, with an H₂ permeance of over 7.9×10⁻⁷ mol m⁻² s⁻¹ Pa⁻¹, which was 4.6 times higher than that of a randomly oriented ZIF-95 membrane.     

Copper‐based Metal‐organic Framework Applied in the Development of an Electrochemical Biomimetic Sensor for Catechol Determination

In this study, the synthesis and characterization of a Cu‐based metal‐organic framework (MOF) [Cu₃(BTC)₂(H₂O)₃]_n (where BTC=benzene‐1,3,5‐tricarboxylate), known as HKUST‐1, were performed. The Cu‐MOF was applied in the modification of a carbon paste to obtain a biomimetic sensor for the electrochemical determination of catechol. Kinetic assays confirmed that the Cu‐MOF acts as a catalyst for the oxidation of catechol and it can be considered as a catechol oxidase mimetic. Under optimized conditions, the calibration curve for catechol presented a linear range of 8.0×10⁻⁷ to 3.2×10⁻⁵ mol L⁻¹, with detection limit of=1.0×10⁻⁷ mol L⁻¹. The sensor demonstrated good intra‐day repeatability and inter‐electrode reproducibility (relative standard deviations of 3.8 % (n=10) and 4.3 % (n=6), respectively). In the selectivity study, an adequate peak‐to‐peak separation was observed for hydroquinone and uric acid in relation to catechol, demonstrating that this sensor has the potential for use in the simultaneous determination of these compounds. This sensor was successfully applied in the determination of catechol in water samples.     

Bimetallic Metal‐Organic Framework‐Derived Nanosheet‐Assembled Nanoflower Electrocatalysts for Efficient Oxygen Evolution Reaction

Non‐noble metal‐based metal–organic framework (MOF)‐derived electrocatalysts have recently attracted great interest in the oxygen evolution reaction (OER). Here we report a facile synthesis of nickel‐based bimetallic electrocatalysts derived from 2D nanosheet‐assembled nanoflower‐like MOFs. The optimized morphologies and large Brunauer–Emmett–Teller (BET) surface area endow FeNi@CNF with efficient OER performance, where the aligned nanosheets can expose abundant active sites and benefit electron transfer. The complex nanoflower morphologies together with the synergistic effects between two metals attributed to the OER activity of the Ni‐based bimetallic catalysts. The optimized FeNi@CNF afforded an overpotential of 356 mV at a current density of 10 mA cm^?2 with a Tafel slope of 62.6 mV dec^?1, and also exhibited superior durability with only slightly degradation after 24 hours of continuous operation. The results may inspire the use of complex nanosheet‐assembled nanostructures to explore highly active catalysts for various applications.     

A Conductive Hybridization Matrix of RuO2 Two‐Dimensional Nanosheets: A Hybrid‐Type Photocatalyst

A universal methodology to efficiently improve the photocatalyst performance of semiconductors was developed by employing exfoliated RuO₂ two‐dimensional nanosheets as a conducting hybridization matrix. The hybridization with a RuO₂ nanosheet is easily achieved by crystal growth or electrostatically derived anchoring of semiconductor nanocrystals on the RuO₂ nanosheet. An enhanced chemical interaction of inorganic semiconductor with hydrophilic RuO₂ nanosheet is fairly effective in optimizing their photocatalytic activity and photostability by the enhancement of charge separation and charge mobility. The RuO₂‐containing nanohybrids show much better photocatalyst functionalities than do the graphene‐containing ones. The present study clearly demonstrates that hydrophilic RuO₂ nanosheets are superior hybridization matrices, over the widely used hydrophobic graphene nanosheets, for exploring new efficient hybrid‐type photocatalysts.     

A Novel Electrochemical Sensor Based on Copper‐based Metal‐Organic Framework for the Determination of Dopamine

A glassy carbon electrode (GCE) modified with a copper‐based metal‐organic framework (MOF) [HKUST‐1, HKUST‐1 = Cu₃(BTC)₂ (BTC = 1,3,5‐benzenetricarboxylicacid)] was developed as a highly sensitive and simple electrochemical sensor for the determination of dopamine (DA). The MOF was prepared by a hydrothermal process, and the morphology and crystal phase of the MOF were characterized by scanning electron microscopy (SEM) and X‐ray diffraction (XRD), respectively. Meanwhile, the electrochemical performance was investigated using cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). Under optimized conditions, the modified electrode showed excellent electrocatalytic activity and high selectivity toward DA. The linear response range was from 5.0 × 10⁻⁷ to 1.0 × 10⁻⁴ M and the detection limit was as low as 1.5 × 10⁻⁷ M. Moreover, the electrochemical sensor was used to detect DA in real samples with excellent results. MOF‐based sensors hold great promise for routine sensing applications in the field of electrochemical sensing.     

A Two‐Dimensional Lamellar Membrane: MXene Nanosheet Stacks

Two‐dimensional (2D) materials are promising candidates for advanced water purification membranes. A new kind of lamellar membrane is based on a stack of 2D MXene nanosheets. Starting from compact Ti₃AlC₂, delaminated nanosheets of the composition Ti₃C₂T_x with the functional groups T (O, OH, and/or F) can be produced by etching and ultrasonication and stapled on a porous support by vacuum filtration. The MXene membrane supported on anodic aluminum oxide (AAO) substrate shows excellent water permeance (more than 1000 L m⁻² h⁻¹ bar⁻¹) and favorable rejection rate (over 90 %) for molecules with sizes larger than 2.5 nm. The water permeance through the MXene membrane is much higher than that of the most membranes with similar rejections. Long‐time operation also reveals the outstanding stability of the MXene membrane for water purification.     

Ultrathin Metal–Organic Framework Nanosheets with Ultrahigh Loading of Single Pt Atoms for Efficient Visible‐Light‐Driven Photocatalytic H2 Evolution

A surfactant‐stabilized coordination strategy is used to make two‐dimensional (2D) single‐atom catalysts (SACs) with an ultrahigh Pt loading of 12.0 wt %, by assembly of pre‐formed single Pt atom coordinated porphyrin precursors into free‐standing metal–organic framework (MOF) nanosheets with an ultrathin thickness of 2.4±0.9 nm. This is the first example of 2D MOF‐based SACs. Remarkably, the 2D SACs exhibit a record‐high photocatalytic H₂ evolution rate of 11 320 μmol g^?1 h^?1 via water splitting under visible light irradiation (λ>420 nm) compared with those of reported MOF‐based photocatalysts. Moreover, the MOF nanosheets can be readily drop‐casted onto solid substrates, forming thin films while still retaining their photocatalytic activity, which is highly desirable for practical solar H₂ production.     

Formation of Ultrathin,Continuous Metal–Organic Framework Membranes on Flexible Polymer Substrates

Metal–organic framework (MOF) materials have an enormous potential in separation applications, but to realize their potential as semipermeable membranes they need to be assembled into thin continuous macroscopic films for fabrication into devices. By using a facile immersion technique, we prepared ultrathin, continuous zeolitic imidazolate framework (ZIF‐8) membranes on titania‐functionalized porous polymeric supports. The coherent ZIF‐8 layer was surprisingly flexible and adhered well to the support, and the composite membrane could sustain bending and elongation. The membranes exhibited molecular sieving behavior, close to the theoretical permeability of ZIF‐8, with hydrogen permeance up to 201×10^?7 mol m^?2 s^?1 Pa^?1 and an ideal H₂/CO₂ selectivity of 7:1. This approach offers significant opportunities to exploit the unique properties of MOFs in the fabrication of separation and sensing devices.     

Mixed Metal–Organic Framework with Multiple Binding Sites for Efficient C2H2/CO2 Separation

The separation of C₂H₂/CO₂ is particularly challenging owing to their similarities in physical properties and molecular sizes. Reported here is a mixed metal–organic framework (M′MOF), [Fe(pyz)Ni(CN)₄] ( FeNi‐M′MOF , pyz=pyrazine), with multiple functional sites and compact one‐dimensional channels of about 4.0 Å for C₂H₂/CO₂ separation. This MOF shows not only a remarkable volumetric C₂H₂ uptake of 133 cm³ cm^?3, but also an excellent C₂H₂/CO₂ selectivity of 24 under ambient conditions, resulting in the second highest C₂H₂‐capture amount of 4.54 mol L^?1, thus outperforming most previous benchmark materials. The separation performance of this material is driven by π–π stacking and multiple intermolecular interactions between C₂H₂ molecules and the binding sites of FeNi‐M′MOF . This material can be facilely synthesized at room temperature and is water stable, highlighting FeNi‐M′MOF as a promising material for C₂H₂/CO₂ separation.     

para‐Xylene Ultra‐selective Zeolite MFI Membranes Fabricated from Nanosheet Monolayers at the Air–Water Interface

The control of membrane morphology and microstructure is crucial to improve the separation performance of molecular‐sieve membranes. This can be enabled by making thin, dense, and uniform seed‐crystal coatings, which are then intergrown into continuous membranes. Herein, we show a novel and simple floating particle coating method can give closely packed monolayers of zeolite nanosheets on nonporous or porous supports. The zeolite nanosheet monolayer is formed at the air–water interface in a conical Teflon trough. As the water in the trough is drained, the monolayer is deposited on a support placed below. Membranes prepared by gel‐free secondary growth of the nanosheets deposited by this method show unprecedented ultra‐selective performance for separation of para‐ from ortho‐xylene (separation factor >10 000).     

Growing ZIF-8 Seeds on Charged COF Substrates toward Efficient Propylene-Propane Separation Membranes

We report a covalent organic framework (COF) induced seeding strategy to fabricate metal–organic framework (MOF) membranes. Contrary to graphene oxide nuclei-depositing substrate, COF substrate has uniform pore size, high microporosity and abundant functional groups. We designed a series of charged COF nanosheets to induce the formation of ZIF-8@COF nanosheet seeds with high aspect ratio over 150, which were readily processed into a compact and uniform seed layer. The resulting ZIF-8 membranes with thickness down to 100 nm exhibit an ultrahigh C₃H₆/C₃H₈ separation performance and superior long-term stability. Our strategy is also validated by fabricating ultrathin ZIF-67 and UiO-66 membranes.     

Water Transport with Ultralow Friction through Partially Exfoliated g-C3N4 Nanosheet Membranes with Self-Supporting Spacers

Two-dimensional (2D) graphitic carbon nitride (g-C₃N₄) nanosheets show brilliant application potential in numerous fields. Herein, a membrane with artificial nanopores and self-supporting spacers was fabricated by assembly of 2D g-C₃N₄ nanosheets in a stack with elaborate structures. In water purification the g-C₃N₄ membrane shows a better separation performance than commercial membranes. The g-C₃N₄ membrane has a water permeance of 29 L m⁻² h⁻¹ bar⁻¹ and a rejection rate of 87 % for 3 nm molecules with a membrane thickness of 160 nm. The artificial nanopores in the g-C₃N₄ nanosheets and the spacers between the partially exfoliated g-C₃N₄ nanosheets provide nanochannels for water transport while bigger molecules are retained. The self-supported nanochannels in the g-C₃N₄ membrane are very stable and rigid enough to resist environmental challenges, such as changes to pH and pressure conditions. Permeation experiments and molecular dynamics simulations indicate that a novel nanofluidics phenomenon takes place, whereby water transport through the g-C₃N₄ nanosheet membrane occurs with ultralow friction. The findings provide new understanding of fluidics in nanochannels and illuminate a fabrication method by which rigid nanochannels may be obtained for applications in complex or harsh environments.