Thermosensitive molecularly imprinted hydrogel cross‐linked with N‐malely chitosan for the recognition and separation of BSA

A novel temperature‐sensitive molecularly imprinted hydrogel composed of N‐isopropylacrylamide and acrylamide has been prepared by using free‐radical polymerization and was cross‐linked by modified water‐soluble N‐maley chitosan in aqueous solution. BSA (pI 4.9, MW 66.0 kDa) was used as the template protein. The produced hydrogels were characterized by environmental SEM to reveal the microcosmic morphology. A microporous structure was only found in the imprinted hydrogel, while no obvious microporous structure was found in nonimprinted hydrogels. The lower critical solution temperature of the hydrogels was 34°C, and the optimal binding conditions were tested, namely, the adsorption equilibrium time of 6 h and initial BSA concentration of 1.0 mg/mL. The adsorption capacity Q_max was determined by Langmuir isotherm plots and was 5.72 mg/g for imprinted hydrogel and 1.18 mg/g for nonimprinted hydrogels. A separation factor (β) of 4 was obtained when bovine hemoglobin (pI 6.9, MW 64.0 kDa) was selected as the particular reference protein. Molecular weights and pIs were chosen to investigate the selectivity of the hydrogels. It was shown that the shape memory and the size effect were the major factors for the recognition. This imprinted hydrogel was used to specifically adsorb the BSA from the protein mixture.     

Stereoselective and Chiroselective Surface Plasmon Resonance (SPR) Analysis of Amino Acids by Molecularly Imprinted Au‐Nanoparticle Composites

Au nanoparticles (NPs) functionalized with thioaniline and cysteine are used to assemble bis‐aniline‐bridged Au‐NP composites on Au surfaces using an electropolymerization process. During the polymerization of the functionalized Au NPs in the presence of different amino acids, for example, L ‐glutamic acid, L ‐aspartic acid, L ‐histidine, and L ‐phenylalanine, zwitterionic interactions between the amino acids and the cysteine units linked to the particles lead to the formation of molecularly imprinted sites in the electropolymerized Au‐NP composites. Following the elimination of the template amino acid molecules, the electropolymerized matrices reveal selective recognition and binding capabilities toward the imprinted amino acid. Furthermore, by imprinting of L ‐glutamic or D ‐glutamic acids, chiroselective imprinted sites are generated in the Au‐NP composites. The binding of amino acids to the imprinted recognition sites was followed by surface plasmon resonance spectroscopy. The refractive index changes occurring upon the binding of the amino acids to the imprinted sites are amplified by the coupling between the localized plasmon associated with the Au NPs and the surface plasmon wave.     

Property and Application of BACy‐Based Functional Hydrogels

Conventional polyacrylamide hydrogels prepared from the free radical polymerization between acrylamide and N,N′‐methylenebisacrylamide (NMBA) have been frequently used in the biochemical technique like the sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS‐PAGE) to resolve protein mixtures. In this study, we have prepared an alternative polyacrylamide hydrogel from the cross‐linking of acrylamide and N,N′‐bisacrylylcystamine (BACy). In addition, we have compared the BACy‐based hydrogel with the NMBA‐based polyacrylamide hydrogel for their physical properties such as swelling ratio, shear modulus, crosslink density and morphology. Moreover, we further determined whether BACy‐based polyacrylamide hydrogel could be applied to SDS‐PAGE and proteomics research. The results showed that this type of hydrogel is capable of separating proteins and facilitates further in‐gel protein digestion and the following protein identifications by mass spectrometry. In summary, our study provides a basis for the putative application of BACy‐based hydrogels.     

Photo‐crosslinkable hydrogel‐based 3D microfluidic culture device

We developed the photo‐crosslinkable hydrogel‐based 3D microfluidic device to culture neural stem cells (NSCs) and tumors. The photo‐crosslinkable gelatin methacrylate (GelMA) polymer was used as a physical barrier in the microfluidic device and collagen type I gel was employed to culture NSCs in a 3D manner. We demonstrated that the pore size was inversely proportional to concentrations of GelMA hydrogels, showing the pore sizes of 5 and 25 w/v% GelMA hydrogels were 34 and 4 μm, respectively. It also revealed that the morphology of pores in 5 w/v% GelMA hydrogels was elliptical shape, whereas we observed circular‐shaped pores in 25 w/v% GelMA hydrogels. To culture NSCs and tumors in the 3D microfluidic device, we investigated the molecular diffusion properties across GelMA hydrogels, indicating that 25 w/v% GelMA hydrogels inhibited the molecular diffusion for 6 days in the 3D microfluidic device. In contrast, the chemicals were diffused in 5 w/v% GelMA hydrogels. Finally, we cultured NSCs and tumors in the hydrogel‐based 3D microfluidic device, showing that 53–75% NSCs differentiated into neurons, while tumors were cultured in the collagen gels. Therefore, this photo‐crosslinkable hydrogel‐based 3D microfluidic culture device could be a potentially powerful tool for regenerative tissue engineering applications.     

Molecular Imprinting of Cyclodextrin Supramolecular Hydrogels Improves Drug Loading and Delivery

Cyclodextrin‐based controlled delivery materials have previously been developed for controlled release of different therapeutic drugs. In this study, a supramolecular hydrogel made from cyclodextrin‐based macromonomers is subjected to molecular imprinting to investigate the impact on release kinetics and drug loading, when compared with non‐imprinted, or alternately imprinted hydrogels. Mild synthesis conditions are used to molecularly imprint three antibiotics—novobiocin, rifampicin, and vancomycin—and to test two different hydrogel chemistries. The release profile and drug loading of the molecularly imprinted hydrogels are characterized using ultraviolet spectroscopy over a period of 35 days and compared to non‐imprinted, and alternately imprinted hydrogels. While only modest differences are observed in the release rate of the antibiotics tested, a substantial difference is observed in the total drug‐loading amount possible for hydrogels releasing drugs which has been templated by those drugs. Hydrogels releasing drugs which are templated by other drugs do not show improved release or loading. Analysis by FTIR does not show substantial incorporation of drug into the polymer. Lastly, bioactivity assays confirmed long‐term stability and release of incorporated antibiotics.     

Three‐dimensional microfabrication of protein hydrogels via two‐photon‐excited thiol‐vinyl ester photopolymerization

Engineering three‐dimensional (3D) hydrogels with well‐defined architectures has become increasingly important for tissue engineering and basic research in biomaterials science. To fabricate 3D hydrogels with (sub)cellular‐scale features, two‐photon polymerization (2PP) shows great promise although the technique is limited by the selection of appropriate hydrogel precursors. In this study, we report the synthesis of gelatin hydrolysate vinyl esters (GH‐VE) and its copolymerization with reduced derivatives of bovine serum albumin (acting as macrothiols). Photorheology of the thiol‐ene copolymerization shows a much more rapid onset of polymerization and a higher end modulus in reference to neat GH‐VE. This allowed 2PP to provide well‐defined and stable hydrogel microstructures. Efficiency of the radical‐mediated thiol‐vinyl ester photopolymerization allows high 2PP writing speed (as high as 50 mm s^?1) with low laser power (as low as 20 mW). MTT assays indicate negligible cytotoxicities of the GH‐VE macromers and of the thiol‐ene hydrogel pellets. Osteosarcoma cells seeded onto GH‐VE/BSA hydrogels with different macromer relative ratios showed a preference for hydrogels with higher percentage of GH‐VE. This can be attributed both to a favorable modulus and preferable protein environment since gelatin favors cell adhesion and albumin incurs nonspecific binding. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4799–4810     

Oligomeric Hydrogels Self‐Assembled from Reduction‐Controlled Condensation

Polymer hydrogels and small‐molecule‐based (SMB) supramolecular hydrogels have been widely explored. But oligomeric hydrogels have remained a challenge because synthetic difficulties of the oligomers and control of their amphiphilicities. Reported herein is the rational design of two precursors Cys(SEt)‐Lys‐CBT ( 1 ) and (Cys‐Lys‐CBT)₂ ( 2 ) (CBT=2‐cyano‐6‐aminobenzothiazole) and the use of a biocompatible condensation to prepare oligomeric hydrogels. Glutathione reduction of 1 or 2 yields the same gelator Cys‐Lys‐CBT ( 3 ) which condenses with each other to yield amphiphilic cyclic oligomers. The oligomers instantly self‐assemble into nanofibers and form oligomeric hydrogels with similar mechanic properties. Chemical analyses indicated that the major condensation product in both two hydrogels is a cyclic dimer. Considering its biocompatibility, optimal mechanical strength, and biodegradability, we believe that our oligomeric hydrogel might be useful for long‐term drug delivery in the future.     

Dependence of Protein Recognition of Temperature‐Sensitive Imprinted Hydrogels on Preparation Temperature

Temperature‐sensitive imprinted and non‐imprinted hydrogels composed of N‐isopropylacrylamide (NIPA) and 2‐acrylamido‐2‐methyl‐propanosulfonic acid (AMPS) have been prepared by free‐radical crosslinking copolymerization in aqueous solution at three different temperatures: 10 °C (below the lower critical solution temperature, LCST), 33 °C (at the LCST), and 40 °C (above the LCST). Myoglobin (Mb, MW 17 kDa) is used as the template biomolecule. The effects of the initial concentration and adsorption time over the Mb adsorption capacity of the hydrogels have been analyzed and found to be strongly dependent on the preparation temperature (T_prep). The maximum Mb adsorption for the imprinted hydrogel prepared at 10 °C is 97.40 ± 2.35 mg Mb · g⁻¹ dry gel in 0.32 mg · mL⁻¹ Mb solution at 22 °C. Moreover, batch adsorption equilibrium and selectivity studies have been performed using a reference molecule, hemoglobin (Hb, MW 65 kDa). The imprinted hydrogels have a 2.8–3.3 times higher adsorption capacity for Mb than the non‐imprinted hydrogels prepared at the same T_preps, and also have a 1.8–2.7 times higher selectivity for the imprinted molecule.

     

pH/temperature - sensitive imprinted ionic poly(N-tert-butylacrylamide-co-acrylamide/maleic acid) hydrogels for bovine serum albumin

In this study, we have prepared pH/temperature-sensitive imprinted ionic poly(N-tert-butylacrylamide-co-acrylamide/maleic acid) [P(TBA-co-AAm/MA)] hydrogels for bovine serum albumin (BSA) by using molecular imprinting method. BSA adsorption from aqueous BSA solutions was investigated with two types of hydrogel systems prepared by non-imprinted and imprinted methods. Hydrogels imprinted with BSA showed higher adsorption capacity and specificity for BSA than hydrogels prepared by the usual procedure. At all studied conditions, the highest BSA adsorption was observed in the hydrogel imprinted with 8.63 wt.-% BSA. In addition, the imprinted hydrogels exhibited both for good selectivity BSA and high adsorption rate depending on the number of BSA-sized cavities. Adsorption studies showed that other stimuli, such as pH, temperature and initial BSA concentration also influenced the BSA adsorption capacity of both non-imprinted and imprinted hydrogels.     

Synthesis of poly(2‐hydroxyethyl methacrylate)‐based molecularly imprinted polymer nanoparticles containing timolol maleate: morphological,thermal, and drug release along with cell biocompatibility studies

This work was aimed to synthesize and characterize poly(2‐hydroxyethyl methacrylate) [poly (HEMA)]‐based molecularly imprinted polymer nanoparticles (MIP NPs) containing timolol maleate (TM) via precipitation polymerization. The molecular structures of the MIP and non‐imprinted polymer (NIP) NPs were compared by means of Fourier transform infrared spectroscopy. The morphological observations by using scanning electron microscopy and transmission electron microscopy confirmed the formation of MIP NPs as small as 128 nm in average diameter with appropriate synthesis conditions. Thermal behaviors of the samples were also studied by the use of thermogravimetric analysis and differential scanning calorimetry. By considering a series of key factors such as monomer : template ratio, cross‐linker type, pH, and temperature, the sample with promising characteristics was found to be that of HEMA : TM ratio of 10:1, 40 mmol of ethylene glycol dimethacrylate as cross‐linker, and polymerization temperature of 60°C in acetonitrile as porogenic solvent. Furthermore, the ultraviolet‐visible (UV‐vis) spectrophotometry results proved a controlled release of TM from the MIP NP samples compared with NIP ones at extended periods. Moreover, the cytotoxicity of the MIP and NIP NPs samples was evaluated on mesenchymal stem cells, and the obtained observations showed that they had no adverse side effect on the living cells; especially the surface of the MIP NPs sample depicted highly cell's biocompatibility. Finally, the outcomes from designed different experiments conducted us that the HEMA‐based MIP NPs have great potential as an ocular nanocarrier for TM delivery. Copyright © 2016 John Wiley & Sons, Ltd.     

Double‐crosslinked reversible redox‐responsive hydrogels based on disulfide–thiol interchange

We present novel redox‐responsive hydrogels based on poly(N‐isopropylacrylamide) or poly(acrylamide), consisting of a reversible disulfide crosslinking agent N,N′‐bis(acryloyl)cystamine and a permanent crosslinking agent N,N′‐methylenebisacrylamide for microfluidic applications. The mechanism of swelling/deswelling behavior starts with the cleavage and reformation of disulfide bonds, leading to a change of crosslinking density and crosslinking points. Raman and ultraviolet‐visible spectroscopy confirm that conversion efficiency of thiol–disulfide interchange up to 99%. Rheological analysis reveals that the E modulus of hydrogel is dependent on the crosslinking density and can be repeatedly manipulated between high‐ and low‐stiffness states over at least 5 cycles without significant decrease. Kinetic studies showed that the mechanical strength of the gels changes as the redox reaction proceeds. This process is much faster than the autonomous diffusion in the hydrogel. Moreover, cooperative diffusion coefficient (D_coop) indicates that the swelling process of the hydrogel is affected by the reduction reaction. Finally, this reversibly switchable redox behavior of bulky hydrogel could be proven in microstructured hydrogel dots through short‐term photopatterning process. These hydrogel dots on glass substrates also showed the desired short response time on cyclic swelling and shrinking processes known from downsized hydrogel shapes. Such stimuli‐responsive hydrogels with redox‐sensitive crosslinkers open a new pathway in exchanging analytes for sensing and separating in microfluidics applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2590–2601     

On‐line determination of 4‐nitrophenol by combining molecularly imprinted solid‐phase extraction and fiber‐optic spectrophotometry

In the present paper, we describe a new on‐line SPE system where molecular imprinting, fiber‐optic detection and flow injection analysis were combined for the first time. This new system has been applied for the on line detection of 4‐nitrophenol (4‐NP). Initially, molecularly imprinted polymers (MIP) have been prepared for the selective extraction of 4‐NP using 4‐vinylpyridine and ethylene glycol dimethacrylate as functional and cross‐linking monomers, respectively. Selective extraction was achieved using the designed MIP with 97% of recovery on imprinted polymer and 10% on control polymer. The system provided a high degree of accuracy, with RSDs varying between 0.7 and 1.39%. In respect of accuracy, reproducibility, and rapidity, this system is comparable with HPLC. In short, the system allows simple, fast, and accurate analyte determination with the possibility of future automation.     

On the Hopping Efficiency of Nanoparticles in the Electron Transfer across Self‐Assembled Monolayers

Redox reactions of solvated molecular species at gold‐electrode surfaces modified by electrochemically inactive self‐assembled molecular monolayers (SAMs) are found to be activated by introducing Au nanoparticles (NPs) covalently bound to the SAM to form a reactive Au–alkanedithiol–NP–molecule hybrid entity. The NP appears to relay long‐range electron transfer (ET) so that the rate of the redox reaction may be as efficient as directly on a bare Au electrode, even though the ET distance is increased by several nanometers. In this study, we have employed a fast redox reaction of surface‐confined 6‐(ferrocenyl) hexanethiol molecules and NPs of Au, Pt and Pd to address the dependence of the rate of ET through the hybrid on the particular NP metal. Cyclic voltammograms show an increasing difference in the peak‐to‐peak separation for NPs in the order Au<Pt<Pd, especially when the length of the alkanedithiol increases from octanedithiol to decanedithiol. The corresponding apparent rate constants, k_app, for decanedithiol are 1170, 360 and 14 s^?1 for NPs of Au, Pt and Pd, respectively, indicating that the efficiency of NP mediation of the ET clearly depends on the nature of the NP. Based on a preliminary analysis rooted in interfacial electrochemical ET theory, combined with a simplified two‐step view of the NP coupling to the electrode and the molecule, this observation is referred to the density of electronic states of the NPs, reflected in a broadening of the molecular electron/NP bridge group levels and energy‐gap differences between the Fermi levels of the different metals.     

A Two‐Step Method for Transferring Single‐Walled Carbon Nanotubes onto a Hydrogel Substrate

Carbon nanotube (CNT)‐hydrogel nanocomposites are beneficial for various biomedical applications, such as nerve regeneration, tissue engineering, sensing, or implant coatings. Still, there are impediments to developing nanocomposites, including attaining a homogeneous CNT‐polymer dispersion or patterning CNTs on hydrogels. While few approaches have been reported for patterning CNTs on polymeric substrates, these methods include high temperature, high vacuum or utilize a sacrificial layer and, hence, are incompatible with hydrogels as they lead to irreversible collapse in hydrogel structure. In this study, a novel two‐step method is designed to transfer CNTs onto hydrogels. First, dense CNTs are grown on quartz substrates. Subsequently, hydrogel solutions are deposited on the quartz‐grown CNTs. Upon gelation, the hydrogel with transferred CNTs is peeled from the quartz. Successful transfer is confirmed by scanning electron microscopy and indirectly by cell attachment. The efficient transfer is attributed to π‐interactions pregelation between the polymers in solution and the CNTs.

     

Design,Synthesis, and Phenotypic Profiling of Pyrano‐Furo‐Pyridone Pseudo Natural Products

Natural products (NPs) inspire the design and synthesis of novel biologically relevant chemical matter, for instance through biology‐oriented synthesis (BIOS). However, BIOS is limited by the partial coverage of NP‐like chemical space by the guiding NPs. The design and synthesis of “pseudo NPs” overcomes these limitations by combining NP‐inspired strategies with fragment‐based compound design through de novo combination of NP‐derived fragments to unprecedented compound classes not accessible through biosynthesis. We describe the development and biological evaluation of pyrano‐furo‐pyridone (PFP) pseudo NPs, which combine pyridone‐ and dihydropyran NP fragments in three isomeric arrangements. Cheminformatic analysis indicates that the PFPs reside in an area of NP‐like chemical space not covered by existing NPs but rather by drugs and related compounds. Phenotypic profiling in a target‐agnostic “cell painting” assay revealed that PFPs induce formation of reactive oxygen species and are structurally novel inhibitors of mitochondrial complex I.     

3‐D Interdigitated electrodes for uniform stimulation of electro‐responsive hydrogels for biomedical applications

Stimuli‐responsive hydrogels are continuing to increase in demand in biomedical applications. Occluding a blood vessel is one possible application which is ideal for a hydrogel because of their ability to expand in a fluid environment. However, typically stimuli‐responsive hydrogels focus on bending instead of radial uniform expansion, which is required for an occlusion application. This article focuses on using an interdigitated electrode device to stimulate an electro‐responsive hydrogel in order to demonstrate a uniform swelling/deswelling of the hydrogel. A Pluronic‐bismethacrylate (PF127‐BMA) hydrogel modified with hydrolyzed methacrylic acid, in order to make it electrically responsive, is used in this article. An interdigitated electrode device was manufactured containing Platinum electrodes. The results in this paper show that the electrically biased hydrogels deswelled 230% more than the non‐biased samples on average. The hydrogels deswelled uniformly and showed no visual deformations due to the electrical bias. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1523–1528     

Dual‐fluorophore Raspberry‐like Nanohybrids for Ratiometric pH Sensing

We report on the development of raspberry‐like silica structures formed by the adsorption of 8‐hydroxypyrene‐1,3,6‐trisulfonate (HPTS)@silica nanoparticles (NPs) on rhodamine B isothiocyanate (RBTIC)@silica NPs for ratiometric fluorescence‐based pH sensing. To overcome the well‐known problem of dye leaching which occurs during encapsulation of anionic HPTS dye in silica NPs, we utilized a polyelectrolyte‐assisted incorporation of the anionic HPTS. The morphological and optical characterization of the as‐synthesized dye‐doped NPs and the resulting nanohybrids were carried out. The pH‐sensitive dye, HPTS, incorporated in the HPTS‐doped silica NPs provided a pH‐dependent fluorescence response while the RBITC‐doped silica provided the reference signal for ratiometric sensing. We evaluated the effectiveness of the nanohybrids for pH sensing; the ratio of the fluorescence emission intensity at 510 nm and 583 nm at excitation wavelengths of 454 nm and 555 nm, respectively. The results showed a dynamic response in the acidic pH range. With this approach, nanohybrids containing different dyes or receptors could be developed for multifunctioning and multiplexing applications.     

Introduction of a planar defect in a molecularly imprinted photonic crystal sensor for the detection of bisphenol A

This paper reports the preparation of a molecularly imprinted inverse opal hydrogel containing a 2D defect layer, by combining the Langmuir-Blodgett technique and the photonic crystal template method. By coupling the exceptional characteristics of molecularly imprinted polymers, sensitive to the presence of a target molecule, and those of photonic crystals in a single device, we could obtain a defect-embedded imprinted photonic polymer consisting in a three-dimensional, highly-ordered and interconnected macroporous array, where nanocavities complementary to analytes in shape and binding sites are distributed. As a proof of concept, we prepared a three-dimensional macroporous array of poly(methacrylic acid) (PMAA) containing molecular imprints of bisphenol A (BPA) and a planar defect layer consisting in macropores of different size. The optical properties of the resulting inverse opal were investigated using reflection spectroscopy. The defect layer was shown to enhance the sensitivity of the photonic crystal material, opening new possibilities towards the development smart optical sensing devices.     

Recent Advances in the Chemistry of N‐Heterocyclic‐Carbene‐Functionalized Metal‐Nanoparticles and Their Applications

Metal‐nanoparticles (M‐NPs) have been widely applied in catalysis, imaging, sensing and medicine. One particularly active area of this research is the modification of the surface of the nanoparticles to prevent aggregation through the coordination of ligands. N‐Heterocyclic carbenes (NHCs) have emerged as suitable ligands for this purpose due to their affinity to the metals and their strongly electron donating nature. A number of rationally designed NHC‐modified M‐NPs have been developed using strategies based on metal complex decomposition and ligand exchange. Herein, NHC‐stabilized M‐NPs based on a range of transition metals, especially the recent advances, were summarized.     

Design,Synthesis, and Phenotypic Profiling of Pyrano‐Furo‐Pyridone Pseudo Natural Products

Natural products (NPs) inspire the design and synthesis of novel biologically relevant chemical matter, for instance through biology‐oriented synthesis (BIOS). However, BIOS is limited by the partial coverage of NP‐like chemical space by the guiding NPs. The design and synthesis of “pseudo NPs” overcomes these limitations by combining NP‐inspired strategies with fragment‐based compound design through de novo combination of NP‐derived fragments to unprecedented compound classes not accessible through biosynthesis. We describe the development and biological evaluation of pyrano‐furo‐pyridone (PFP) pseudo NPs, which combine pyridone‐ and dihydropyran NP fragments in three isomeric arrangements. Cheminformatic analysis indicates that the PFPs reside in an area of NP‐like chemical space not covered by existing NPs but rather by drugs and related compounds. Phenotypic profiling in a target‐agnostic “cell painting” assay revealed that PFPs induce formation of reactive oxygen species and are structurally novel inhibitors of mitochondrial complex I.