Self‐Templated Formation of Uniform NiCo2O4 Hollow Spheres with Complex Interior Structures for Lithium‐Ion Batteries and Supercapacitors

Despite the significant advancement in preparing metal oxide hollow structures, most approaches rely on template‐based multistep procedures for tailoring the interior structure. In this work, we develop a new generally applicable strategy toward the synthesis of mixed‐metal‐oxide complex hollow spheres. Starting with metal glycerate solid spheres, we show that subsequent thermal annealing in air leads to the formation of complex hollow spheres of the resulting metal oxide. We demonstrate the concept by synthesizing highly uniform NiCo₂O₄ hollow spheres with a complex interior structure. With the small primary building nanoparticles, high structural integrity, complex interior architectures, and enlarged surface area, these unique NiCo₂O₄ hollow spheres exhibit superior electrochemical performances as advanced electrode materials for both lithium‐ion batteries and supercapacitors. This approach can be an efficient self‐templated strategy for the preparation of mixed‐metal‐oxide hollow spheres with complex interior structures and functionalities.     

Template‐Free Synthesis of Nanorod‐Assembled Hierarchical Zn1−xMnxS Hollow Nanostructures with Enhanced Pseudocapacitive Properties

Mixed‐metal sulfide Zn_1?xMn_xS nanorod‐assembled hierarchical hollow spheres were synthesized by a template‐free solvothermal process based on Ostwald ripening. In the reaction system, glycerol plays a key role in the formation of Zn_xMn_1?xS hierarchical hollow structures by a quasi‐microemulsion‐template mechanism. When applied as capacitor electrode material, the hierarchical Zn_1?xMn_xS hollow spheres show excellent electrochemical performance. Specifically, Zn_0.25Mn_0.75S hollow spheres can deliver a high specific capacitance of 664 F g^?1 at a current rate of 1 A g^?1, which is almost five times of that of MnS under the same conditions and higher than those of previously reported single Mn‐based compounds.     

Formation of CoS2 Nanobubble Hollow Prisms for Highly Reversible Lithium Storage

Metal–organic frameworks (MOFs) have been intensively used as the templates/precursors to synthesize complex hollow structures for various energy‐related applications. Herein we report a facile two‐step diffusion‐controlled strategy to generate novel MOFs derived hierarchical hollow prisms composed of Nanosized CoS₂ bubble‐like subunits. Uniform zeolitic imidazolate framework‐67 (ZIF‐67) hollow prisms assembled by interconnected nanopolyhedra are first synthesized via a transformation process. Afterwards, these ZIF‐67 building blocks are converted into CoS₂ bubble‐like hollow particles to form the complex hollow prisms through a sulfidation reaction with an additional annealing treatment. When evaluated as an electrode material for lithium‐ion batteries, the as‐obtained CoS₂ nanobubble hollow prisms show remarkable electrochemical performance with good rate capability and long cycle life.     

Hydrothermal Synthesis of Unique Hollow Hexagonal Prismatic Pencils of Co3V2O8⋅n H2O: A New Anode Material for Lithium‐Ion Batteries

Hollow structures of transition‐metal oxides, particularly mixed‐metal oxides, could be promising for various applications such as lithium‐ion batteries (LIBs). Compared to the synthesis of metal oxide hollow spheres by the template method, non‐spherical metal oxide hollow hexagonal polyhedra have not been developed to date. Herein, we report the controlled hydrothermal synthesis of a new phase of Co₃V₂O₈?n H₂O hollow hexagonal prismatic pencils (HHPPs), which is composed of uniform structural units. By varying the amount of NaOH in the presence of NH₄⁺ and without any template or organic surfactant, the hexagonal prismatic pencils gradually transform from solid into hollow structures, with sizes varying from 5 to 20 μm. The structure of pencils can be preserved only in a limited range of the molar ratio of OH^?/NH₄⁺. As a new anode material for LIBs, such hollow pencils exhibit impressive lithium storage properties with high capacity, good cycling stability, and superior rate capability.     

One‐Step Synthesis of SnO2 and TiO2 Hollow Nanostructures with Various Shapes and Their Enhanced Lithium Storage Properties

A versatile one‐step method for the general synthesis of metal oxide hollow nanostructures is demonstrated. This method involves the controlled deposition of metal oxides on shaped α‐Fe₂O₃ crystals which are simultaneously dissolved. A variety of uniform SnO₂ hollow nanostructures, such as nanococoons, nanoboxes, hollow nanorings, and nanospheres, can be readily generated. The method is also applicable to the synthesis of shaped TiO₂ hollow nanostructures. As a demonstration of the potential applications of these hollow nanostructures, the lithium storage capability of SnO₂ hollow structures is investigated. The results show that such derived SnO₂ hollow structures exhibit stable capacity retention of 600–700 mAh g^?1 for 50 cycles at a 0.2 C rate and good rate capability at 0.5–1 C, perhaps benefiting from the unique structural characteristics.     

A Multi‐Wall Sn/SnO2@Carbon Hollow Nanofiber Anode Material for High‐Rate and Long‐Life Lithium‐Ion Batteries

Multi‐wall Sn/SnO₂@carbon hollow nanofibers evolved from SnO₂ nanofibers are designed and programable synthesized by electrospinning, polypyrrole coating, and annealing reduction. The synthesized hollow nanofibers have a special wire‐in‐double‐wall‐tube structure with larger specific surface area and abundant inner spaces, which can provide effective contacting area of electrolyte with electrode materials and more active sites for redox reaction. It shows excellent cycling stability by virtue of effectively alleviating pulverization of tin‐based electrode materials caused by volume expansion. Even after 2000 cycles, the wire‐in‐double‐wall‐tube Sn/SnO₂@carbon nanofibers exhibit a high specific capacity of 986.3 mAh g^?1 (1 A g^?1) and still maintains 508.2 mAh g^?1 at high current density of 5 A g^?1. This outstanding electrochemical performance suggests the multi‐wall Sn/SnO₂@ carbon hollow nanofibers are great promising for high performance energy storage systems.     

Synergistic Ternary Composite (Carbon/Fe3O4@Graphene) with Hollow Microspherical and Robust Structure for Li‐Ion Storage

The electrode materials with hollow structure and/or graphene coating are expected to exhibit outstanding electrochemical performances in energy‐storage systems. 2D graphene‐wrapped hollow C/Fe₃O₄ microspheres are rationally designed and fabricated by a novel facile and scalable strategy. The core@double‐shell structure SPS@FeOOH@GO (SPS: sulfonated polystyrene, GO: graphene oxide) microspheres are first prepared through a simple one‐pot approach and then transformed into C/Fe₃O₄@G (G: graphene) after calcination at 500 °C in Ar. During calcination, the Kirkendall effect resulting from the diffusion/reaction of SPS‐derived carbon and FeOOH leads to the formation of hollow structure carbon with Fe₃O₄ nanoparticles embedded in it. In the rationally constructed architecture of C/Fe₃O₄@G, the strongly coupled C/Fe₃O₄ hollow microspheres are further anchored onto 2D graphene networks, achieving a strong synergetic effect between carbon, Fe₃O₄, and graphene. As an anode material of Li‐ion batteries (LIBs), C/Fe₃O₄@G manifests a high reversible capacity, excellent rate behavior, and outstanding long‐term cycling performance (1208 mAh g^?1 after 200 cycles at 100 mA g^?1).     

General Synthesis of Multi‐Shelled Mixed Metal Oxide Hollow Spheres with Superior Lithium Storage Properties

Complex hollow structures of transition metal oxides, especially mixed metal oxides, could be promising for different applications such as lithium ion batteries. However, it remains a great challenge to fabricate well‐defined hollow spheres with multiple shells for mixed transition metal oxides. Herein, we have developed a new “penetration–solidification–annealing” strategy which can realize the synthesis of various mixed metal oxide multi‐shelled hollow spheres. Importantly, it is found that multi‐shelled hollow spheres possess impressive lithium storage properties with both high specific capacity and excellent cycling stability. Specifically, the carbon‐coated CoMn₂O₄ triple‐shelled hollow spheres exhibit a specific capacity of 726.7 mA h g^?1 and a nearly 100 % capacity retention after 200 cycles. The present general strategy could represent a milestone in design and synthesis of mixed metal oxide complex hollow spheres and their promising uses in different areas.     

Improving Na+ transport kinetics and Na+ storage of hierarchical rhenium-nickel sulfide (ReS2@NiS2) hollow architecture by assembling layered 2D-3D heterostructures

Mixed metal sulfides have been widely used as anode material of sodium-ion batteries (SIBs) because of their excellent conductivity and sodium ion storage performance. Herein, ReS₂@NiS₂ heterostructures have been triumphantly designed and prepared through anchoring ReS₂ nanosheet arrays on the surface of NiS₂ hollow nanosphere. Specifically, the carbon nanospheres was used as hard template to synthesize NiS₂ hollow spheres as the substrate and then the ultrathin two-dimensional ReS₂ nanosheet arrays were uniformly grown on the surface of NiS₂. The internal hollow property provides sufficient space to relieve the volume expansion, and the outer two-dimensional nanosheet realizes the rapid electron transport and insertion/extraction of Na⁺. Owing to the great improvement of the transport kinetics of Na⁺, NiS₂@ReS₂ heterostructure electrode can achieve a high specific capacity of 400 mAh/g at the high current density of 1 A/g and still maintain a stable cycle stability even after 220 cycles. This hard template method not only paves a new way for the design and construct binary metal sulfide heterostructure electrode materials with outstanding electrochemical performance for Na⁺ batteries but also open up the potential applications of anode materials of SIBs.     

Hollow polyhedron structure of amorphous Ni-Co-S/Co(OH)_2 for high performance supercapacitors

In power storage technology,ion exchange is widely used to modify the electronic structures of electrode materials to stimulate their electrochemical properties.Here,we proposed a multistep ion exchange(cation exchange and anion exchange) strategy to synthesize amorphous Ni-Co-S and β-Co(OH)_2 hybrid nanomaterials with a hollow polyhedron structures.The synergistic effects of different components and the remarkable superiorities of hollow structure endow Ni-Co-S/Co(OH)_2 electrode with outstanding electrochemical performance,including ultra-high specific capacity(1440.0 C/g at 1 A/g),superior capacitance retention rate(79.1% retention at 20 A/g) and long operating lifespan(81.4% retention after5000 cycles).Moreover,the corresponding hybrid supercapacitor enjoys a high energy density of 58.4 Wh/kg at the power density of 0.8 kW/kg,and a decent cyclability that the capacitances are maintained at80.8% compared with the initial capacitance.This research presents a high-performance electrode material and provides a promising route for the construction of electrode materials for supercapacitors with both structural and component advantages.     

Porous ZnO/Co3O4/N‐doped carbon nanocages synthesized via pyrolysis of complex metal–organic framework (MOF) hybrids as an advanced lithium‐ion battery anode

Metal oxides have a large storage capacity when employed as anode materials for lithium‐ion batteries (LIBs). However, they often suffer from poor capacity retention due to their low electrical conductivity and huge volume variation during the charge–discharge process. To overcome these limitations, fabrication of metal oxides/carbon hybrids with hollow structures can be expected to further improve their electrochemical properties. Herein, ZnO‐Co₃O₄ nanocomposites embedded in N‐doped carbon (ZnO‐Co₃O₄@N‐C) nanocages with hollow dodecahedral shapes have been prepared successfully by the simple carbonizing and oxidizing of metal–organic frameworks (MOFs). Benefiting from the advantages of the structural features, i.e. the conductive N‐doped carbon coating, the porous structure of the nanocages and the synergistic effects of different components, the as‐prepared ZnO‐Co₃O₄@N‐C not only avoids particle aggregation and nanostructure cracking but also facilitates the transport of ions and electrons. As a result, the resultant ZnO‐Co₃O₄@N‐C shows a discharge capacity of 2373 mAh g^?1 at the first cycle and exhibits a retention capacity of 1305 mAh g^?1 even after 300 cycles at 0.1 A g^?1. In addition, a reversible capacity of 948 mAh g^?1 is obtained at a current density of 2 A g^?1, which delivers an excellent high‐rate cycle ability.     

Cross‐Linked Polyphosphazene Hollow Nanosphere‐Derived N/P‐Doped Porous Carbon with Single Nonprecious Metal Atoms for the Oxygen Reduction Reaction

Heteroatom‐doped polymers or carbon nanospheres have attracted broad research interest. However, rational synthesis of these nanospheres with controllable properties is still a great challenge. Herein, we develop a template‐free approach to construct cross‐linked polyphosphazene nanospheres with tunable hollow structures. As comonomers, hexachlorocyclotriphosphazene provides N and P atoms, tannic acid can coordinate with metal ions, and the replaceable third comonomer can endow the materials with various properties. After carbonization, N/P‐doped mesoporous carbon nanospheres were obtained with small particle size (≈50 nm) and high surface area (411.60 m² g^?1). Structural characterization confirmed uniform dispersion of the single atom transition metal sites (i.e., Co‐N₂P₂) with N and P dual coordination. Electrochemical measurements and theoretical simulations revealed the oxygen reduction reaction performance. This work provides a solution for fabricating diverse heteroatom‐containing polymer nanospheres and their derived single metal atom doped carbon catalysts.     

One‐Pot Fabrication of Hierarchical Nanosheet‐Based TiO2–Carbon Hollow Microspheres for Anode Materials of High‐Rate Lithium‐Ion Batteries

Hierarchical and hollow nanostructures have recently attracted considerable attention because of their fantastic architectures and tunable property for facile lithium ion insertion and good cycling stability. In this study, a one‐pot and unusual carving protocol is demonstrated for engineering hollow structures with a porous shell. Hierarchical TiO₂ hollow spheres with nanosheet‐assembled shells (TiO₂ NHS) were synthesized by the sequestration between the titanium source and 2,2′‐bipyridine‐5,5′‐dicarboxylic acid, and kinetically controlled etching in trifluoroacetic acid medium. In addition, annealing such porous nanostructures presents the advantage of imparting carbon‐doped functional performance to its counterpart under different atmospheres. Such highly porous structures endow very large specifics surface area of 404 m² g^?1 and 336 m² g^?1 for the as‐prepared and calcination under nitrogen gas. C/TiO₂ NHS has high capacity of 204 mA h g^?1 at 1 C and a reversible capacity of 105 mA h g^?1 at a high rate of 20 C, and exhibits good cycling stability and superior rate capability as an anode material for lithium‐ion batteries.     

3D Hollow Flower‐like CoWO4 Derived from ZIF‐67 Grown on Ni‐foam for High‐Performance Asymmetrical Supercapacitors

A three‐dimensional (3D) hollow CoWO₄ composite grown on Ni‐foam (3D?H CoWO₄/NF) based on a flower‐like metal‐organic framework (MOF) is designed by utilizing a facile dipping and hydrothermal approach. The 3D?H CoWO₄/NF not only possesses large specific areas and rich active sites, but also accommodates volume expansion/contraction during charge/discharge processes. In addition, the unique structure facilitates fast electron/ion transport of 3D?H CoWO₄/NF. Meanwhile, a series of characterization measurements demonstrate the appropriate morphology and excellent electrochemical performance of the material. The 3D?H CoWO₄/NF possesses a high specific capacitance of 1395 F g^?1, an excellent cycle stability with 89% retention after 3000 cycles and superior rate property. Furthermore, the 3D?H CoWO₄/NF can be used as a cathode to configurate an asymmetric supercapacitor (ASC), and 3D?H CoWO₄/NF//AC shows a good energy density (29.0 W h kg^?1). This work provides a facile method for the preparation of 3D‐hollow electrode materials with high electrochemical capability for advanced energy storage devices.     

Zirconium–Porphyrin‐Based Metal–Organic Framework Hollow Nanotubes for Immobilization of Noble‐Metal Single Atoms

Single atoms immobilized on metal–organic frameworks (MOFs) with unique nanostructures have drawn tremendous attention in the application of catalysis but remain a great challenge. Various single noble‐metal atoms have now been successfully anchored on the well‐defined anchoring sites of the zirconium porphyrin MOF hollow nanotubes, which are probed by aberration‐corrected scanning transmission electron microscopy and synchrotron‐radiation‐based X‐ray absorption fine‐structure spectroscopy. Owing to the hollow structure and excellent photoelectrochemical performance, the HNTM‐Ir/Pt exhibits outstanding catalytic activity in the visible‐light photocatalytic H₂ evolution via water splitting. The single atom immobilized on MOFs with hollow structures are expected to pave the way to expand the potential applications of MOFs.     

Metal–Organic Framework/PVDF Composite Membranes with High H2 Permselectivity Synthesized by Ammoniation

Herein we report a new ammoniation‐based chemical modification strategy for synthesis of continuous and uniform metal–organic framework (MOF)/polyvinylidene fluoride (PVDF) membranes with attractive performance. Ammoniation can promote the support PVDF membrane to produce amino groups, form a nanoparticle structure, and be well cross‐linked; therefore, the high‐density heterogeneous nucleation sites for MOFs growth were provided and the thermal stability and chemical resistance of composite membranes can be greatly improved. The high‐quality layers of representative Cu‐BTC and ZIF‐8 were synthesized on the chemically modified PVDF membranes. By ammoniation, ZIF‐7 can even be grown under harsh synthetic conditions such as in DMF precursor solutions at 403 K. The fabricated MOF/PVDF composite membranes with excellent hollow fiber structures and enhanced structural stability exhibited high H₂ permselectivities for H₂/CO₂ and H₂/N₂.     

Multishelled Metal Oxide Hollow Spheres: Easy Synthesis and Formation Mechanism

Uniform multishelled NiO, Co₃O₄, ZnO, and Au@NiO hollow spheres were synthesized (NiO and Co₃O₄ hollow spheres for the first time) by a simple shell‐by‐shell self‐assembly allowing for tuning of the the size, thickness and shell numbers by controlling the heat treatment, glucose/metal salt molar ratio, and hydrothermal reaction time. These findings further the development of synthetic methodologies for multishelled hollow structures and could open up new opportunities for deeper understanding of the mechanisms of shell‐by‐shell self‐assembly. Moreover, the double‐shelled NiO hollow sphere exhibits a higher photocatalytic activity for degradation of methyl orange than its morphological counterparts.     

A Versatile Iron–Tannin‐Framework Ink Coating Strategy to Fabricate Biomass‐Derived Iron Carbide/Fe‐N‐Carbon Catalysts for Efficient Oxygen Reduction

The conversion of biomass into valuable carbon composites as efficient non‐precious metal oxygen‐reduction electrocatalysts is attractive for the development of commercially viable polymer electrolyte membrane fuel‐cell technology. Herein, a versatile iron–tannin‐framework ink coating strategy is developed to fabricate cellulose‐derived Fe₃C/Fe‐N‐C catalysts using commercial filter paper, tissue, or cotton as a carbon source, an iron–tannin framework as an iron source, and dicyandiamide as a nitrogen source. The oxygen reduction performance of the resultant Fe₃C/Fe‐N‐C catalysts shows a high onset potential (i.e. 0.98 V vs the reversible hydrogen electrode (RHE)), and large kinetic current density normalized to both geometric electrode area and mass of catalysts (6.4 mA cm^?2 and 32 mA mg^?1 at 0.80 V vs RHE) in alkaline condition. This method can even be used to prepare efficient catalysts using waste carbon sources, such as used polyurethane foam.     

Hollow and Yolk‐Shell Iron Oxide Nanostructures on Few‐Layer Graphene in Li‐Ion Batteries

We report a simple and template‐free strategy for the synthesis of hollow and yolk‐shell iron oxide (FeO_x) nanostructures sandwiched between few‐layer graphene (FLG) sheets. The morphology and microstructure of this material are characterized in detail by X‐ray diffraction, X‐ray absorption near‐edge structure, X‐ray photoelectron spectroscopy, Raman spectroscopy, scanning and transmission electron microscopy. Its properties are evaluated as negative electrode material for Li‐ion batteries and compared with those of solid FeO_x/FLG and two commercial iron oxides. In all cases, the content of carbon in the electrode has a great influence on the performance. The use of pristine FLG improves the capacity retention and further enhancement is achieved with the hollow structure. For a low carbon loading of 18 wt. %, the presence of metallic iron in the hollow and yolk‐shell FeO_x/FLG composite significantly enhances the capacity retention, albeit with a relatively lower initial reversible capacity, retaining above 97 % after 120 cycles at 1000 mA g^?1 in the voltage range of 0.1–3.0 V.     

Engineering Fast Ion Conduction and Selective Cation Channels for a High‐Rate and High‐Voltage Hybrid Aqueous Battery

The rechargeable aqueous metal‐ion battery (RAMB) has attracted considerable attention due to its safety, low costs, and environmental friendliness. Yet the poor‐performance electrode materials lead to a low feasibility of practical application. A hybrid aqueous battery (HAB) built from electrode materials with selective cation channels could increase the electrode applicability and thus enlarge the application of RAMB. Herein, we construct a high‐voltage K–Na HAB based on K₂FeFe(CN)₆ cathode and carbon‐coated NaTi₂(PO₄)₃ (NTP/C) anode. Due to the unique cation selectivity of both materials and ultrafast ion conduction of NTP/C, the hybrid battery delivers a high capacity of 160 mAh g^?1 at a 0.5 C rate. Considerable capacity retention of 94.3 % is also obtained after 1000 cycles at even 60 C rate. Meanwhile, high energy density of 69.6 Wh kg^?1 based on the total mass of active electrode materials is obtained, which is comparable and even superior to that of the lead acid, Ni/Cd, and Ni/MH batteries.