Potential‐Dependent Adlayer Structure and Dynamics at the Ionic Liquid/Au(111) Interface: A Molecular‐Scale In Situ Video‐STM Study

Room‐temperature ionic liquids are of great current interest for electrochemical applications in material and energy science. Essential for understanding the electrochemical reactivity of these systems are detailed data on the structure and dynamics of the interfaces between these compounds and metal electrodes, which distinctly differ from those in traditional electrolytes. In situ studies are presented of Au(111) electrodes in 1‐butyl‐1‐methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([BMP][TFSA]) by high‐speed scanning tunneling microscopy (video‐STM). [BMP][TFSA] is one of the best‐understood air and water stable ionic liquids. The measurements provide direct insights into the potential‐dependent molecular arrangement and surface dynamics of adsorbed [BMP]⁺ cations in the innermost layer on the negatively charged Au electrode surface. In particular, two distinct subsequent transitions in the adlayer structure and lateral mobility are observed with decreasing potential.     

胞嘧啶吸附在粗糙金电极上的表面增强拉曼光谱

应用电化学伏安法和表面增强拉曼光谱(SERS)研究在-1.0 V~0 V电位区间内胞嘧啶于粗糙金电极表面的吸附行为.结果表明,在本实验的电位区间,胞嘧啶是以其N3位垂直吸附在粗糙金电极表面的.在负电位区间环呼吸振动模的强度出现极大值,与其它振动模强度相比,作者认为电磁场的增强和电荷转移均使该谱峰的拉曼信号增强.胞嘧啶的环呼吸振动频率随着电位负移而红移,这意味着它与金电极的成键作用减弱.同时也表明SERS谱可用于研究生物分子在金属电极表面的吸附行为.     

An Electrochemical Sensor Based on Gold Nanoparticles Incorporated in Mesoporous MFI Zeolite for Determination of Purine Bases in DNA

An electrochemical sensor was developed based on gold nanoparticles incorporated in mesoporous MFI zeolite for the determination of purine bases. Au nanoparticles (AuNPs) were incorporated into the mesoporous MFI zeolite (AuNPs/m‐MFI) by post‐grafting reaction. The composite materials were characterized by transmission electron microscopy (TEM), X‐ray photoelectron spectroscopy (XPS) and electrochemical methods. Au nanoparticles with a size of 5‐20 nm are uniformly dispersed in the pores of mesoporous MFI zeolite. And the morphology of MFI zeolite can be perfectly kept after pore expansion and Au nanoparticles incorporation. The electrocatalytic oxidation of purine bases (guanine and adenine in DNA) is investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The surface‐confined Au nanoparticles provide the good catalytic activity for oxidation of purine bases. The simultaneous detection of guanine and adenine can be achieved at AuNPs/m‐MFI composites modified glassy carbon electrode (GCE). The electrochemical sensor based on AuNPs/m‐MFI exhibits wide linear range of 0.5–500 μM and 0.8–500 μM with detection limit of 0.25 and 0.29 μM for guanine and adenine, respectively. Moreover, the electrochemical sensor is applied to evaluation of guanine and adenine in herring sperm DNA samples with satisfactory results.     

The van der Waals Interactions of n‐Alkanethiol‐Covered Surfaces: From Planar to Curved Surfaces

The van der Waals (vdW) interactions of n ‐alkanethiols (ATs) adsorbed on planar Au(111) and Au(100) surfaces and curved Au nanoparticles of different diameters are reported. By means of electrochemical measurements and molecular dynamic calculations, the increase in the average geometrical curvature of the surface influences the global interactions, that is, decreasing vdW interactions between neighboring molecules. Small NPs do not present the same electrochemical behavior as planar surfaces. The transition between nanoparticle to flat surface electrochemical response is estimated to occur at a circa 13–20 nm diameter range.     

Single Fusion Events at Polarized Liquid–Liquid Interfaces

A new electrochemical framework for tracking individual soft particles in solution and monitoring their fusion with polarized liquid–liquid interfaces is reported. The physicochemical principle lies in the interfacial transfer of an ionic probe confined in the particles dispersed in solution and that is released upon their collision and fusion with the fluid interface. As a proof‐of‐concept, spike‐like transients of a stochastic nature are reported in the current–time response of 1,2‐dichloroethane(DCE)|water(W) submilli‐interfaces after injection of DCE‐in‐W emulsions. The sign and potential dependence of the spikes reflect the charge and lipophilicity of the ionic load of the droplets. A comparison with dynamic light scattering measurements indicates that each spike is associated with the collision of a single sub‐picoliter droplet. This opens a new framework for the study of single fusion events at the micro‐ and nanoscale and of ion transport across biomimetic soft interfaces.     

Adsorption phenomena in the NAD+/NADH system at glassy carbon electrodes

A variety of electrochemical approaches has been used to investigate the adsorption of NAD⁺, NADH and the NAD-NAD dimer from aqueous solution at glassy carbon electrodes (GCE) with supplementary studies of adsorption at pyrolytic graphite and platinum electrodes from aqueous media and at GCE from DMSO solution. The following hypotheses are advanced concerning the adsorption orientation: at carbon electrodes, on which NADH is not adsorbed, NAD⁺ produced by anodic oxidation of the NADH is first rapidly adsorbed in a planar configuration relative to the electrode surface, which is probably bound to the surface through the adenine moiety; there is then a relatively slow reorientation of the adsorbed NADH molecules to a perpendicular orientation relative to the electrode surface, which adsorbate is more tightly bound to the surface than the planar oriented adsorbate and which likely involves interaction between parallel adenine and pyridinium rings. Reduction (one-electron process) of NAD⁺ at the GCE produces the NAD-NAD dimer, which, at a clean electrode surface, involves a diffusion-controlled process and an adsorption-controlled process; the latter is due to formation of adsorbed dimer, which is more strongly adsorbed than NAD⁺. The dimer is oxidized at the GCE only if it is adsorbed. The factors controlling and involved in the adsorption processes have been examined with particular reference to the use of anodic voltammetry for the analytical determination of NADH.     

Identifying Multinuclear Organometallic Intermediates in On‐Surface [2+2] Cycloaddition Reactions

We investigate the on‐surface [2+2] cycloaddition reaction of 2,3,6,7,10,11‐hexabromotriphenylene (HBTP) on Ag(111), Cu(111), Au(111), and Cu‐dosed Au(111) surfaces using STM and DFT simulation focusing on the organometallic intermediates. The fully debrominated HBTP molecules form an organo‐silver framework on Ag(111) and an organo‐copper framework on Cu(111), both incorporating multinuclear metal adatom clusters. The organo‐silver framework is converted into porous covalent networks via [2+2] cycloaddition above 240 °C. In contrast, the organo‐copper framework is very stable and does not undergo [2+2] cycloaddition even at 300 °C. On Au(111), no organo‐gold intermediate of [2+2] cycloaddition is observed. After loading Cu onto Au(111), the partially debrominated HBTP molecules bind to Cu adatom dimers to form multinuclear organo‐copper complexes at 100 °C which undergo [2+2] cycloaddition at 140 °C. This study shows that the choice of surface can direct the reaction pathway.     

Anisotropically Electrochemical–Mechanical Evolution in Solid‐State Batteries and Interfacial Tailored Strategy

All‐solid‐state batteries have attracted attention owing to the potential high energy density and safety; however, little success has been made on practical applications of solid‐state batteries, which is largely attributed to the solid–solid interface issues. A fundamental elucidation of electrode–electrolyte interface behaviors is of crucial significance but has proven difficult. The interfacial resistance and capacity fading issues in a solid‐state battery were probed, revealing a heterogeneous phase transition evolution at solid–solid interfaces. The strain‐induced interfacial change and the contact loss, as well as a dense metallic surface phase, deteriorate the electrochemical reaction in solid‐state batteries. Furthermore, the in situ growth of electrolytes on secondary particles is proposed to fabricate robust solid–solid interface. Our study enlightens new insights into the mechanism behind solid–solid interfacial reaction for optimizing advanced solid‐state batteries.     

Co‐adsorption of Cations as the Cause of the Apparent pH Dependence of Hydrogen Adsorption on a Stepped Platinum Single‐Crystal Electrode

The successful deployment of advanced energy‐conversion systems depends critically on our understanding of the fundamental interactions of the key adsorbed intermediates (hydrogen *H and hydroxyl *OH) at electrified metal–aqueous electrolyte interfaces. The effect of alkali metal cations (Li⁺, Na⁺, K⁺, Cs⁺) on the non‐Nernstian pH shift of the step‐related voltammetric peak of the Pt(553) electrode is investigated over a wide pH window (1 to 13) by means of experimental and computational methods. The co‐adsorbed alkali cations along the step weaken the OH adsorption at the step sites, causing a positive shift of the potential of the step‐related peak on Pt(553). Density functional calculations explain the observations on the identity and concentration of alkali cations on the non‐Nernstian pH shift, and demonstrate that cation–hydroxyl co‐adsorption causes the apparent pH dependence of “hydrogen” adsorption in the step sites of platinum electrodes.     

Assembly dynamics and detailed structure of 1-propanethiol monolayers on Au(111) surfaces observed real time by in situ STM

1-Propanethiol is chosen as a model alkanethiol to probe detailed mechanisms of the self-assembled monolayer (SAM) formation at aqueous/Au(111) interfaces. The assembly processes, including initial physi- and chemisorption, pit formation, and domain growth, were recorded into movies in real-time with high resolution by in situ scanning tunneling microscopy (STM) under potential control. Two major adsorption steps were disclosed in the propanethiol SAM formation. The first step involves weak interactions accompanied by the lift of the Au(111) surface reconstruction, which depends reversibly on the electrochemical potentials. The second step is chemisorption to form a dense monolayer, accompanied by formation of pits as well as structural changes in the terrace edges. Pits emerged at the stage of the reconstruction lift and increased to a maximum surface coverage of 4.0 +/- 0.4% at the completion of the SAM formation. Well-defined triangular pits in the SAM were found on the large terraces (more than 300 nm wide), whereas few and small pinholes appeared at the terrace edge areas. Smooth edges were converted into saw-like structural features during the SAM formation, primarily along the Au(111) atomic rows. These observations suggest that shrinking and rearrangement of gold atoms are responsible for both formation of the pits and the shape changes of the terrace edges. STM images disclose a (2 square root 3 x 3)R30 degrees periodic lattice within the ordered domains. Along with electrochemical measurements, each lattice unit is assigned to contain four propanethiol molecules exhibiting different electronic contrasts, which might originate in different surface orientations of the adsorbed molecules.     

Direct Electrochemical Oxidation of DNA on Polycrystalline Gold Electrodes

Electrochemical CV and SWV studies were performed with double stranded DNA from salmon testes (dsDNA) and single stranded DNAs, containing 25 nucleotides (ssDNA) directly adsorbed at polycrystalline Au electrodes. A distinct oxidation peak at +730 mV (SWV, scan rate 0.248 V s^?1) or at +730 – +780 mV (CV, scan rate from 0.3 to 1 V s^?1) was obtained with DNA‐modified Au electrodes after a time‐dependent prepolarization step at a positive potential value, i.e., at +500 mV (vs. Ag|AgCl), performed with the DNA‐modified Au electrodes dipped in a blank buffer solution. No electrochemical activity was detected when ssDNA, containing no guanines, was used for adsorptive modification of the Au electrodes. Electrochemical impedance measurements registered a possible reorganization of the adsorbed DNA layer in the course of the prepolarization, accompanied by decreasing in‐phase impedance. The results enable us to relate the oxidation process observed at the DNA‐modified Au electrodes with the oxidation of guanine residues in DNA.     

Adsorption and electrochemical activity: an in situ electrochemical scanning tunneling microscopy study of electrode reactions and potential-induced adsorption of porphyrins

The effect of adsorption on molecular properties and reactivity is a central topic in interfacial physical chemistry. At electrochemical interfaces, adsorbed molecules may lose their electrochemical activity. The absence of in situ probes has hindered our understanding of this phenomenon and electrode reactions in general. In this work, classical electrochemistry and electrochemical scanning tunneling microscopy (EC-STM) were combined to provide molecular level insight into electrochemical reactions and the molecular adsorption state at the electrolyte-electrode interface. The metal-free porphyrin 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (TPyP) adsorbed on Au(111) in 0.1 M H(2)SO(4) solution was chosen as a model system. TPyP is found to irreversibly adsorb on Au(111) over a wide range of potentials, from -0.25 to 0.6 V(SCE). The adsorption state of TPyP has a dramatic effect on its electrochemistry. Preadsorbed, oxidized TPyP displays no well-defined cathodic peaks in cyclic voltammograms in sharp contrast to solution-phase TPyP. Our present work provides direct, molecular level evidence of the electrochemically "invisible" species. Electrochemical activity of absorbed species is recovered by allowing the oxidized molecule sufficient time (tens of minutes) to reduce. The redox state of adsorbed TPyP also affects the nature of the adsorption. Oxidized species can apparently only form monolayers. However, multilayers, stable enough to be imaged by STM, can form when the adsorbed TPyP is in the reduced state. This suggests that by controlling the electrochemistry one can either promote or suppress the formation of multilayers.     

Direct imaging of hexaamine-ruthenium(III) in domain boundaries in monolayers of single-stranded DNA

We describe adsorption and identification of the binding sites of [Ru(NH3)6]3+ (RuHex) molecules in a closely packed monolayer of a 13-base ss-DNA on Au(111) electrodes by electrochemical in situ scanning tunneling microscopy (STM), cyclic voltammetry and interfacial capacitance data. In situ STM at single-molecule resolution shows that RuHex adsorbs only at the domain borders and near defects. Together with the electrochemical data that show a negative redox potential shift for RuHex adsorbed to DNA strands, this strongly suggests that RuHex binds only to the exposed phosphate groups in the DNA backbone.     

In situ SERS and SHINERS study of electrochemical hydrogenation of p-ethynylaniline in nonaqueous solvents

Surface-enhanced Raman spectroscopy (SERS) studies of electrode/solution interfaces are important for understanding electrochemical processes. However, revealing the nature of reactions at well-defined single crystal electrode surfaces, which are SERS-inactive, remains challenging. In this work, shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) was used for the first time to study electrochemical adsorption and hydrogenation reactions at single crystal surfaces in nonaqueous solvents. A roughened Au surface was also studied for comparison. The experimental results show that the hydrogenation of adsorbed p-ethynylaniline (PEAN) on roughened Au electrode surfaces occurred at very negative potentials in methanol because of the catalytic effect of surface plasmon resonance (SPR). However, because “hot electrons” were blocked by the silica shell of Au@SiO₂ nanoparticles and aprotic acetonitrile was an ineffective hydrogen source, surface reactions at Au(111) were inhibited in the systems studied. Density functional theory (DFT) calculations revealed that the PEAN triple bond opened, allowing adsorption in a flat configuration on the Au(111) surface via two carbon atoms. This work provides an advanced understanding of electrochemical interfacial processes at single crystal surfaces in nonaqueous systems.     

Surface enhanced Raman spectra of nucleic acid components adsorbed at a silver electrode

High-resolution vibrational spectra of nucleic acid components adsorbed on a silver electrode were obtained using a spectroelectrochemical method based on the large-intensity enhancement for Raman scattering at electrode surfaces.The laser surface Raman spectra of purine, adenine, adenosine, deoxyadenosine, adenine mononucleotides, adenylyl-3′, 5′-adenosine and polyriboadenylic acid were recorded in the range of 150–3500 cm^?1. The intensities of the vibrational bands were highly dependent upon the electrochemical preparation of the electrode, the applied potential and the nature of the adsorbate species. High-intensity spectra in rather dilute bulk solutions were obtained.The phosphate derivatives of adenosine exhibited strongly enhanced Raman scattering. Spectral band frequencies corresponded closely with normal Raman spectra of these molecules in solution. The adenine ring breathing mode at 740 cm^?1 and the adenine ring skeletal vibration at 1335 cm^?1 produced prominent Raman scattering. A strong band at about 240 cm^?1 for the adenine mononucleotides was attributed to silver/adsorbed phosphate group vibrations.     

Molecular‐level structures at poly(4‐vinyl pyridine)/acid interfaces probed by nonlinear vibrational spectroscopy

The molecular structures of the interfaces between a solid poly(4‐vinyl pyridine) (P4VP) surface and poly(acrylic acid) (PAA) as well as hydrochloric acid (HCl) solutions were probed using sum frequency generation (SFG) vibrational spectroscopy in situ in real time. Spectroscopic results clearly reveal that the PAA molecules are adsorbed onto the P4VP surface via hydrogen bonding at the P4VP/PAA solution interface while the P4VP surface is protonated at the P4VP/HCl solution interface. Consequently, the water molecules near the interfaces are strongly perturbed by these two interactions, exhibiting different orderings at the two interfaces. This work clearly demonstrates the power of studying the interfacial molecular‐level structures via nonlinear vibrational spectroscopy when molecular adsorption happens at the solid–liquid interface and paves a way for our future study on tracing the adsorption dynamics of polymer chains onto solid surfaces. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 848–852     

Infrared studies of the potential controlled adsorption of sodium dodecyl sulfate at the Au(111) electrode surface

Quantitative subtractively normalized interfacial Fourier transform infrared reflection spectroscopy (SNIFTIRS) was used to determine the conformation and orientation of sodium dodecyl sulfate (SDS) molecules adsorbed at the single crystal Au(111) surface. The SDS molecules form a hemimicellar/hemicylindrical (phase I) structure for the range of potentials between -200 ≤ E < 450 mV and condensed (phase II) film for electrode potentials ≥500 mV vs Ag/AgCl. The SNIFTIRS measurements indicate that the alkyl chains within the two adsorbed states of SDS film are in the liquid-crystalline state rather than the gel state. However, the sulfate headgroup is in an oriented state in phase I and is disordered in phase II. The newly acquired SNIFTIR spectroscopy measurements were coupled with previous electrochemical, atomic force microscopy, and neutron reflectivity data to improve the current existing models of the SDS film adsorbed on the Au(111) surface. The IR data support the existence of a hemicylindrical film for SDS molecules adsorbed at the Au(111) surface in phase I and suggest that the structure of the condensed film in phase II can be more accurately modeled by a disordered bilayer.     

Dirac Nodal Arc Semimetal PtSn4: An Ideal Platform for Understanding Surface Properties and Catalysis for Hydrogen Evolution

Conductivity, carrier mobility, and a suitable Gibbs free energy are important criteria that determine the performance of catalysts for a hydrogen evolution reaction (HER). However, it is a challenge to combine these factors into a single compound. Herein, we discover a superior electrocatalyst for a HER in the recently identified Dirac nodal arc semimetal PtSn₄. The determined turnover frequency (TOF) for each active site of PtSn₄ is 1.54 H₂ s^?1 at 100 mV. This sets a benchmark for HER catalysis on Pt‐based noble metals and earth‐abundant metal catalysts. We make use of the robust surface states of PtSn₄ as their electrons can be transferred to the adsorbed hydrogen atoms in the catalytic process more efficiently. In addition, PtSn₄ displays excellent chemical and electrochemical stabilities after long‐term exposure in air and long‐time HER stability tests.     

Ultra‐Stable Plasmonic Colloidal Aggregates for Accurate and Reproducible Quantitative SE(R)RS in Protein‐Rich Biomedia

Au/Ag colloids aggregated with simple salts are amongst the most commonly used substrates in surface‐enhanced (resonance) Raman spectroscopy (SE(R)RS). However, salt‐induced aggregation is a dynamic process, which means that SE(R)RS enhancements vary with time and that measurements therefore need to be taken at a fixed time point, normally within a short time‐window of a few minutes. Here, we present an emulsion templated method which allows formation of densely‐packed quasi‐spherical Au/Ag colloidal aggregates. Since the particles in the product aggregates retain their weakly adsorbed charged ligands and the ionic strength remains low these charged aggregates resist further aggregation while still providing intense SE(R)RS enhancement which remains stable for days. This eliminates a major source of irreproducibility in conventional colloidal SE(R)RS measurements and paves the way for SE(R)RS analysis in complex systems, such as protein‐rich bio‐solutions where conventional aggregated colloids fail.     

Electrochemical Condensation of Methylviologen on Specifically‐adsorbed Anion Layers

The adsorption of methylviologen dications (MV²⁺) on single‐crystalline Au electrodes in both H₂SO₄ and HClO₄ was examined. MV²⁺ strongly interacted with sulfate and bisulfate anions adsorbed on the Au(111) electrode surface in 0.05 M H₂SO₄ under a controlled potential of 1.25 V vs. the reversible hydrogen electrode (RHE). A characteristic non‐Faradaic current was observed at 1.10 V vs. RHE. When adsorption of MV²⁺ was carried out in 0.1 M HClO₄, the electrochemical response of MV²⁺ was less than that obtained in H₂SO₄. The results show that the formation of a highly ordered sulfate/bisulfate adlayer plays an important role in the formation of condensed MV²⁺ layers. Examination of polycrystalline Au and Au(100) electrodes revealed a poor electrochemical response due to the surface roughness of the Au substrate, but the electrochemical detection was applicable to polycrystalline Au electrodes. A systematic investigation of the structural dependency of viologen derivatives showed that molecular size is important for electrostatic interactions with a highly ordered sulfate/bisulfate adlayer. The findings of the present study demonstrate successful detection of MV²⁺ at a concentration of ≤1 pM with a non‐Faradaic current.