Stapled Peptides by Late‐Stage C(sp3)−H Activation

Despite the importance of stapled peptides for drug discovery, only few practical processes to prepare cross‐linked peptides have been described; thus the structural diversity of available staple motifs is currently limited. At the same time, C−H activation has emerged as an efficient approach to functionalize complex molecules. Although there are many reports on the C−H functionalization of amino acids, examples of post‐synthetic peptide C−H modification are rare and comprise almost only C(sp²)−H activation. Herein, we report the development of a palladium‐catalyzed late‐stage C(sp³)−H activation method for peptide stapling, affording an unprecedented hydrocarbon cross‐link. This method was first employed to prepare a library of stapled peptides in solution. The compatibility with various amino acids as well as the influence of the size (i ,i +3 and i ,i +4) and length of the staple were investigated. Finally, a simple solid‐phase procedure was also established.     

Practical Alkoxythiocarbonyl Auxiliaries for Iridium(I)‐Catalyzed C−H Alkylation of Azacycles

The development of new and practical 3‐pentoxythiocarbonyl auxiliaries for Ir^I‐catalyzed C−H alkylation of azacycles is described. This method allows for the α‐C−H alkylation of a variety of substituted pyrrolidines, piperidines, and tetrahydroisoquinolines through alkylation with alkenes. While the practicality of these simple carbamate‐type auxiliaries is underscored by the ease of installation and removal, the method's utility is demonstrated in its ability to functionalize biologically relevant l ‐proline and l ‐trans ‐hydroxyproline, delivering unique 2,5‐dialkylated amino acid analogues that are not accessible by other C−H functionalization methods.     

Single and Twofold Metal‐ and Reagent‐Free Anodic C−C Cross‐Coupling of Phenols with Thiophenes

The first electrochemical dehydrogenative C−C cross‐coupling of thiophenes with phenols has been realized. This sustainable and very simple to perform anodic coupling reaction enables access to two classes of compounds of significant interest. The scope for electrochemical C−H‐activating cross‐coupling reactions was expanded to sulfur heterocycles. Previously, only various benzoid aromatic systems could be converted, while the application of heterocycles was not successful in the electrochemical C−H‐activating cross‐coupling reaction. Here, reagent‐ and metal‐free reaction conditions offer a sustainable electrochemical pathway that provides an attractive synthetic method to a broad variety of bi‐ and terarylic products based on thiophenes and phenols. This method is easy to conduct in an undivided cell, is scalable, and is inherently safe. The resulting products offer applications in electronic materials or as [OSO]²⁻ pincer‐type ligands.     

Multicomponent Aromatic and Benzylic Mannich Reactions through C−H Bond Activation

Multicomponent Mannich reactions through C−H bond activation are described. These transformations allowed for the straightforward generation of densely substituted benzylic and homo-benzylic amines in good yields. The reaction involves a reaction between two transient species: an organometallic species, generated by transition-metal-catalyzed sp² or sp³ C−H bond activation and an in situ generated imine. The use of an acetal as an aldehyde surrogate was found essential for the reaction to proceed. The process could be successfully applied to Rh^III-catalyzed sp² C−H bond functionalization and extended to Cu^II-catalyzed sp³ C−H bond functionalization.     

Directed C−H Activation and Tandem Cross‐Coupling Reactions Using Palladium Nanocatalysts with Controlled Oxidation

Controlled oxidation of palladium nanoparticles provided high‐valent Pd^IV oxo‐clusters which efficiently promote directed C−H halogenation reactions. In addition, palladium nanoparticles can undergo changes in oxidation states to provide both high‐valent Pd^IV and low‐valent Pd⁰ species within one system, and thus a tandem reaction of C−H halogenation and cross‐coupling (C−N, C−C, and C−S bond formation) was successfully established.     

Silver‐Catalyzed Oxidative C(sp3)−P Bond Formation through C−C and P−H Bond Cleavage

The silver‐catalyzed oxidative C(sp³)−H/P−H cross‐coupling of 1,3‐dicarbonyl compounds with H‐phosphonates, followed by a chemo‐ and regioselective C(sp³)−C(CO) bond‐cleavage step, provided heavily functionalized β‐ketophosphonates. This novel method based on a readily available reaction system exhibits wide scope, high functional‐group tolerance, and exclusive selectivity.     

1H‐NMR Analysis of Intra‐ and Intermolecular H‐Bonds of Alcohols in DMSO: Chemical Shift of Hydroxy Groups and Aspects of Conformational Analysis of Selected Monosaccharides,Inositols, and Ginkgolides

The interpretation of ¹H‐NMR chemical shifts, coupling constants, and coefficients of temperature dependence (δ(OH), J(H,OH), and Δδ(OH)/ΔT values) evidences that, in (D₆)DMSO solution, the signal of an OH group involved as donor in an intramolecular H‐bond to a hydroxy or alkoxy group is shifted upfield, whereas the signal of an OH group acting as acceptor of an intramolecular H‐bond and as donor in an intermolecular H‐bond to (D₆)DMSO is shifted downfield. The relative strength of the intramolecular H‐bond depends on co‐operativity and on the acidity of OH groups. The acidity of OH groups is enhanced when they are in an antiparallel orientation to a C−O bond. A comparison of the ¹H‐NMR spectra of alcohols in CDCl₃ and (D₆)DMSO allows discrimination between weak and strong intramolecular H‐bonds. Consideration of IR spectra (CHCl₃ or CH₂Cl₂) shows that the rule according to which the downfield shift of δ(OH) for H‐bonded alcohols in CDCl₃ parallels the strength of the H‐bond is valid only for alcohols forming strong intramolecular H‐bonds. The combined analysis of J(H,OH) and δ(OH) values is illustrated by the interpretation of the spectra of the epoxyalcohols 14 and 15 (Fig. 3). H‐Bonding of hexopyranoses, hexulopyranoses, alkyl hexopyranosides, alkyl 4,6‐O‐benzylidenehexopyranosides, levoglucosans, and inositols in (D₆)DMSO was investigated. Fully solvated non‐anomeric equatorial OH groups lacking a vicinal axial OR group (R=H or alkyl, or (alkoxy)alkyl) show characteristic J(H,OH) values of 4.5 – 5.5 Hz and fully solvated non‐anomeric axial OH groups lacking an axial OR group in β‐position are characterized by J(H,OH) values of 4.2 – 4.4 Hz (Figs. 4 – 6). Non‐anomeric equatorial OH groups vicinal to an axial OR group are involved in a partial intramolecular H‐bond (J(H,OH)=5.4 – 7.4 Hz), whereas non‐anomeric equatorial OH groups vicinal to two axial OR form partial bifurcated H‐bonds (J(H,OH)=5.8 – 9.5 Hz). Non‐anomeric axial OH groups form partial intramolecular H‐bonds to a cis‐1.3‐diaxial alkoxy group (as in 29 and 41 : J(H,OH)=4.8 – 5.0 Hz). The persistence of such a H‐bond is enhanced when there is an additional H‐bond acceptor, such as the ring O‐atom ( 43 – 47 : J(H,OH)=5.6 – 7.6 Hz; 32 and 33 : 10.5 – 11.3 Hz). The (partial) intramolecular H‐bonds lead to an upfield shift (relative to the signal of a fully solvated OH in a similar surrounding) for the signal of the H‐donor. The shift may also be related to the signal of the fully solvated, equatorial HO−C(2), HO−C(3), and HO−C(4) of β‐D ‐glucopyranose ( 16 : 4.81 ppm) by using the following increments: −0.3 ppm for an axial OH group, 0.2 – 0.25 ppm for replacing a vicinal OH by an OR group, ca. 0.1 ppm for replacing another OH by an OR group, 0.2 ppm for an antiperiplanar C−O bond, −0.3 ppm if a vicinal OH group is (partially) H‐bonded to another OR group, and −0.4 to −0.6 for both OH groups of a vicinal diol moiety involved in (partial) divergent H‐bonds. Flip‐flop H‐bonds are observed between the diaxial HO−C(2) and HO−C(4) of the inositol 40 (J(H,OH)=6.4 Hz, δ(OH)=5.45 ppm) and levoglucosan ( 42 ; J(H,OH)=6.7 – 7.1 Hz, δ(OH)=4.76 – 4.83 ppm; bifurcated H‐bond); the former is completely persistent and the latter to ca. 40%. A persistent, unidirectional H‐bond C(1)−OH⋅⋅⋅O−C(10) is present in ginkgolide B and C, as evidenced by strongly different δ(OH) and Δδ(OH)/ΔT values for HO−C(1) and HO−C(10) (Fig. 9). In the absence of this H‐bond, HO−C(1) of 52 resonates 1.1 – 1.2 ppm downfield, while HO−C(10) of ginkgolide A and of 48 – 50 resonates 0.5 – 0.9 ppm upfield.     

Transition‐metal‐free Chemoselective Oxidative C−C Coupling of the sp3 C−H Bond of Oxindoles with Arenes and Addition to Alkene: Synthesis of 3‐Aryl Oxindoles,and Benzofuro‐ and Indoloindoles

A transition‐metal (TM)‐free and halogen‐free NaOt Bu‐mediated oxidative cross‐coupling between the sp³ C−H bond of oxindoles and sp² C−H bond of nitroarenes has been developed to access 3‐aryl substituted and 3,3‐aryldisubstituted oxindoles in DMSO at room temperature in a short time. Interestingly, the sp³ C−H bond of oxindoles could also react with styrene under TM‐free conditions for the practical synthesis of quaternary 3,3‐disubstituted oxindoles. The synthesized 3‐oxindoles have also been further transformed into advanced heterocycles, that is, benzofuroindoles, indoloindoles, and substituted indoles. Mechanistic experiments of the reaction suggests the formation of an anion intermediate from the sp³ C−H bond of oxindole by tert ‐butoxide base in DMSO. The addition of nitrobenzene to the in‐situ generated carbanion leads to the 3‐(nitrophenyl)oxindolyl carbanion in DMSO which is subsequently oxidized to 3‐(nitro‐aryl) oxindole by DMSO.     

One-Pot Synthesis of Primary and Secondary Aliphatic Amines via Mild and Selective sp3 C−H Imination

The direct replacement of sp³ C−H bonds with simple amine units (−NH₂) remains synthetically challenging, although primary aliphatic amines are ubiquitous in medicinal chemistry and natural product synthesis. We report a mild and selective protocol for preparing primary and secondary aliphatic amines in a single pot, based on intermolecular sp³ C−H imination. The first C−H imination of diverse alkanes, this method shows useful site-selectivity within substrates bearing multiple sp³ C−H bonds. Furthermore, this reaction tolerates polar functional groups relevant for complex molecule synthesis, highlighted in the synthesis of amine pharmaceuticals and amination of natural products. We characterize a unique C−H imination mechanism based on radical rebound to an iminyl radical, supported by kinetic isotope effects, stereoablation, resubmission, and computational modeling. This work constitutes a selective method for complex amine synthesis and a new mechanistic platform for C−H amination.     

Outer‐Sphere 2 e−/2 H+ Transfer Reactions of Ruthenium(II)‐Amine and Ruthenium(IV)‐Amido Complexes

A diverse set of 2 e⁻/2 H⁺ reactions are described that interconvert [Ru^II(bpy)(en*)₂]²⁺ and [Ru^IV(bpy)(en‐H*)₂]²⁺ (bpy=2,2′‐bipyridine, en*=H₂NCMe₂CMe₂NH₂, en*‐H=H₂NCMe₂CMe₂NH⁻), forming or cleaving different O−H, N−H, S−H, and C−H bonds. The reactions involve quinones, hydrazines, thiols, and 1,3‐cyclohexadiene. These proton‐coupled electron transfer reactions occur without substrate binding to the ruthenium center, but instead with precursor complex formation by hydrogen bonding. The free energies of the reactions vary over more than 90 kcal mol⁻¹, but the rates are more dependent on the type of X−H bond involved than the associated ΔG °. There is a kinetic preference for substrates that have the transferring hydrogen atoms in close proximity, such as ortho ‐tetrachlorobenzoquinone over its para ‐isomer and 1,3‐cyclohexadiene over its 1,4‐isomer, perhaps hinting at the potential for concerted 2 e⁻/2 H⁺ transfers.     

Formation of Binuclear Zigzag Hexapentaene Titanium Complexes via a Titanacumulene [Ti=C=C=CH2] Intermediate

The reaction of bis(η⁵:η¹‐pentafulvene)titanium complexes with an allylidenephosphorylide Ph₃P=C(H)‐ C(H)=CH₂ leads to binuclear zigzag hexapentaene titanium complexes ( Ti2a , Ti2b ). The formation of the central C₆H₄ unit can be described as a spontaneous double C−H bond activation process, leading to an R₃P=C=C=CH₂ intermediate, as a synthon for a titanabutatriene fragment [(Cp^R)₂Ti=C=C=CH₂] (R: 2‐adamantyl, CH(p‐tol)₂). In a subsequent dimerization Ti2a and Ti2b are formed, proofed by single‐crystal X‐ray diffraction and NMR measurements. The reaction sequence is confirmed by DFT calculations.     

Intramolecular C(sp3)–H Bond Oxygenation by Transition-Metal Acylnitrenoids

This study demonstrates for the first time that easily accessible transition-metal acylnitrenoids can be used for controlled direct C(sp³)-H oxygenations. Specifically, a ruthenium catalyst activates N-benzoyloxycarbamates as nitrene precursors towards regioselective intramolecular C−H oxygenations to provide cyclic carbonates, hydroxylated carbamates, or 1,2-diols. The method can be applied to the chemoselective C−H oxygenation of benzylic, allylic, and propargylic C(sp³)−H bonds. The reaction can be performed in an enantioselective fashion and switched in a catalyst-controlled fashion between C−H oxygenation and C−H amination. This work provides a new reaction mode for the regiocontrolled and stereocontrolled conversion of C(sp³)-H into C(sp³)−O bonds.     

Thioamide‐Directed Cobalt(III)‐Catalyzed Selective Amidation of C(sp3)−H Bonds

A mild, oxidant‐free, and selective Cp*Co^III‐catalyzed amidation of thioamides with robust dioxazolone amidating agents via C(sp³)−H bond activation to generate the desired amidated products is reported. The method is efficient and allows for the C−H amidation of a wide range of functionalized thioamides with aryl‐, heteroaryl‐, and alkyl‐substituted dioxazolones under the Cp*Co^III‐catalyzed conditions. The observed regioselectivity towards primary C(sp³)−H activation is supported by computational studies and the cyclometalation is proposed to proceed by means of an external carboxylate‐assisted concerted metalation/deprotonation mechanism. The reported method is a rare example of the use of a directing group other than the commonly used pyridine and quinolone classes for Cp*Co^III‐catalyzed C(sp³)−H functionalization and the first to exploit thioamides.     

Nitroarenes as the Nitrogen Source in Intermolecular Palladium‐Catalyzed Aryl C–H Bond Aminocarbonylation Reactions

A three‐component palladium‐catalyzed aminocarbonylation of aryl and heteroaryl sp² C−H bonds using nitroarenes as the nitrogen source was achieved using Mo(CO)₆ as the reductant and origin of the CO. This intermolecular C−H bond functionalization does not requires any exogenous ligand to be added, and our mechanism experiments indicate that the palladacycle catalyst serves two roles in the aminocarbonylation reaction: reduce the nitroarene to a nitrosoarene and activate the sp² C−H bond.     

Synthesis of β‐Lactams by Palladium(0)‐Catalyzed C(sp3)−H Carbamoylation

A general and user‐friendly synthesis of β‐lactams is reported that makes use of Pd⁰‐catalyzed carbamoylation of C(sp³)−H bonds, and operates under stoichiometric carbon monoxide in a two‐chamber reactor. This reaction is compatible with a range of primary, secondary and activated tertiary C−H bonds, in contrast to previous methods based on C(sp³)−H activation. In addition, the feasibility of an enantioselective version using a chiral phosphonite ligand is demonstrated. Finally, this method can be employed to synthesize valuable enantiopure free β‐lactams and β‐amino acids.     

Supramolecular Recognition Allows Remote,Site‐Selective C−H Oxidation of Methylenic Sites in Linear Amines

Site‐selective C−H functionalization of aliphatic alkyl chains is a longstanding challenge in oxidation catalysis, given the comparable relative reactivity of the different methylenes. A supramolecular, bioinspired approach is described to address this challenge. A Mn complex able to catalyze C(sp³)‐H hydroxylation with H₂O₂ is equipped with 18‐benzocrown‐6 ether receptors that bind ammonium substrates via hydrogen bonding. Reversible pre‐association of protonated primary aliphatic amines with the crown ether selectively exposes remote positions (C8 and C9) to the oxidizing unit, resulting in a site‐selective oxidation. Remarkably, such control of selectivity retains its efficiency for a whole series of linear amines, overriding the intrinsic reactivity of C−H bonds, no matter the chain length.     

Supramolecular Recognition Allows Remote,Site‐Selective C−H Oxidation of Methylenic Sites in Linear Amines

Site‐selective C−H functionalization of aliphatic alkyl chains is a longstanding challenge in oxidation catalysis, given the comparable relative reactivity of the different methylenes. A supramolecular, bioinspired approach is described to address this challenge. A Mn complex able to catalyze C(sp³)‐H hydroxylation with H₂O₂ is equipped with 18‐benzocrown‐6 ether receptors that bind ammonium substrates via hydrogen bonding. Reversible pre‐association of protonated primary aliphatic amines with the crown ether selectively exposes remote positions (C8 and C9) to the oxidizing unit, resulting in a site‐selective oxidation. Remarkably, such control of selectivity retains its efficiency for a whole series of linear amines, overriding the intrinsic reactivity of C−H bonds, no matter the chain length.     

Electrochemical Synthesis of Thienoacene Derivatives: Transition-Metal-Free Dehydrogenative C−S Coupling Promoted by a Halogen Mediator

The first electrochemical dehydrogenative C−S bond formation leading to thienoacene derivatives is described. Several thienoacene derivatives were synthesized by dehydrogenative C−H/S−H coupling. The addition of ⁿBu₄NBr, which catalytically promoted the reaction as a halogen mediator, was essential.     

Enantioselective Intermolecular Radical Amidation and Amination of Benzylic C−H Bonds via Dual Copper and Photocatalysis

A method for direct access to enantioenriched benzylic amides and carbamate-protected primary benzylamines by C−H functionalization is reported. The C−H substrate is used as limiting reagent with only a small excess of the unactivated amide or carbamate nucleophile. The enantioselective intermolecular dehydrogenative C−N bond formation is enabled by a combination of a chiral copper catalyst, a photocatalyst, and an oxidant, and it takes place under mild conditions, which allow for a broad substrate scope. The method is compatible with late-stage C−H functionalization, and it provides easy access to ¹⁵N-labeled amides and amines starting from cheap ¹⁵NH₄Cl.     

Electro‐oxidized Monolayer CVD Graphene Film Transducer for Ultrasensitive Impedimetric DNA Biosensor

We report the effect of electrochemical anodization on the properties of monolayer graphene as the main aim of this research and consequently using the resulting label‐free impedimetric biosensor for DNA sequences detection. Monolayer graphene was grown by chemical vapor deposition (CVD) with methane as precursor on copper foil, transferred onto a glassy carbon electrode and electrochemically anodized. Raman spectroscopy and X‐Ray photo electron spectroscopy revealed enhancement of defect density, roughness and formation of C−O−C, C−O−H and C=O functional groups after anodization. Amine‐terminated poly T probe was linked covalently to the carboxylic groups of anodized graphene by the zero‐length linker to fabricate the impedance‐based DNA biosensor. The anodized graphene electrode demonstrated a superior performance for electrochemical impedance detection of DNA. The DNA biosensor showed a large linear dynamic range from 2.0×10⁻¹⁸ to 1.0×10⁻¹² M with a limit of detection of 1.0×10⁻¹⁸ M using electrochemical impedance spectroscopy (EIS) method. Equivalent circuit modeling shows that DNA hybridization is detected through a change in charge transfer resistance.