Solid energy calibration standards for P K‐edge XANES: electronic structure analysis of PPh4Br

P K‐edge X‐ray absorption near‐edge structure (XANES) spectroscopy is a powerful method for analyzing the electronic structure of organic and inorganic phosphorus compounds. Like all XANES experiments, P K‐edge XANES requires well defined and readily accessible calibration standards for energy referencing so that spectra collected at different beamlines or under different conditions can be compared. This is especially true for ligand K‐edge X‐ray absorption spectroscopy, which has well established energy calibration standards for Cl (Cs₂CuCl₄) and S (Na₂S₂O₃·5H₂O), but not neighboring P. This paper presents a review of common P K‐edge XANES energy calibration standards and analysis of PPh₄Br as a potential alternative. The P K‐edge XANES region of commercially available PPh₄Br revealed a single, highly resolved pre‐edge feature with a maximum at 2146.96 eV. PPh₄Br also showed no evidence of photodecomposition when repeatedly scanned over the course of several days. In contrast, we found that PPh₃ rapidly decomposes under identical conditions. Density functional theory calculations performed on PPh₃ and PPh₄⁺ revealed large differences in the molecular orbital energies that were ascribed to differences in the phosphorus oxidation state (III versus V) and molecular charge (neutral versus +1). Time‐dependent density functional theory calculations corroborated the experimental data and allowed the spectral features to be assigned. The first pre‐edge feature in the P K‐edge XANES spectrum of PPh₄Br was assigned to P 1s → P‐C π* transitions, whereas those at higher energy were P 1s → P‐C σ*. Overall, the analysis suggests that PPh₄Br is an excellent alternative to other solid energy calibration standards commonly used in P K‐edge XANES experiments.     

Relationship between the structural distortion and the Mn electronic state in La1−xCaxMnO3: a Mn K‐edge XANES study

A theoretical study of the X‐ray absorption near‐edge structure (XANES) spectra at the Mn K‐edge in the La_1?xCa_xMnO₃ series is reported. The relationship between the edge shift, the Ca–La substitution and the distortion of the MnO₆ octahedra in these systems has been studied. It is shown that, by correctly considering these effects simultaneously, the experimental XANES data are consistent with the presence of two different Mn local environments in the intermediate La_1?xCa_xMnO₃ compounds. By taking into account the energy shift associated with the modification of the MnO₆ distortion as Ca substitutes for La, it is possible to reproduce the XANES spectra of the intermediate‐doped compounds starting from the experimental spectra of the end‐members LaMnO₃ and CaMnO₃. These results point out the need to re‐examine the conclusions derived in the past from the simple analysis of the Mn K‐edge XANES edge‐shift in these materials. In particular, it is shown that the modification of the Mn K‐edge absorption through the La_1?xCa_xMnO₃ series is well reproduced by considering the simultaneous presence of both distorted and undistorted octahedra and, consequently, that the existence of charge‐ordering phenomena cannot be ruled out from the XANES data.     

Phosphorus L2,3‐edge XANES: overview of reference compounds

Synchrotron‐based X‐ray absorption near‐edge structure (XANES) spectroscopy is becoming an increasingly used tool for the element speciation in complex samples. For phosphorus (P) almost all XANES measurements have been carried out at the K‐edge. The small number of distinctive features at the P K‐edge makes in some cases the identification of different P forms difficult or impossible. As indicated by a few previous studies, the P L_2,3‐edge spectra were richer in spectral features than those of the P K‐edge. However, experimentally consistent spectra of a wide range of reference compounds have not been published so far. In this study a library of spectral features is presented for a number of mineral P, organic P and P‐bearing minerals for fingerprinting identification. Furthermore, the effect of radiation damage is shown for three compounds and measures are proposed to reduce it. The spectra library provided lays a basis for the identification of individual P forms in samples of unknown composition for a variety of scientific areas.     

Scanning transmission X‐ray microscopy probe for in situ mechanism study of graphene‐oxide‐based resistive random access memory

Here, an in situ probe for scanning transmission X‐ray microscopy (STXM) has been developed and applied to the study of the bipolar resistive switching (BRS) mechanism in an Al/graphene oxide (GO)/Al resistive random access memory (RRAM) device. To perform in situ STXM studies at the C K‐ and O K‐edges, both the RRAM junctions and the I₀ junction were fabricated on a single Si₃N₄ membrane to obtain local XANES spectra at these absorption edges with more delicate I₀ normalization. Using this probe combined with the synchrotron‐based STXM technique, it was possible to observe unique chemical changes involved in the BRS process of the Al/GO/Al RRAM device. Reversible oxidation and reduction of GO induced by the externally applied bias voltages were observed at the O K‐edge XANES feature located at 538.2 eV, which strongly supported the oxygen ion drift model that was recently proposed from ex situ transmission electron microscope studies.     

Electronic structure effects on B K‐edge XANES of minerals

In order to assess the usability of X‐ray absorption near‐edge structure (XANES) for studying the structure of BO_n‐containing materials, the dependence of theoretical XANES at the B K‐edge on the way the scattering potential is constructed is investigated. Real‐space multiple‐scattering calculations are performed for self‐consistent and non‐self‐consistent potentials and for different ways of dealing with the core hole. It is found that in order to reproduce the principal XANES features it is sufficient to use a non‐self‐consistent potential with a relaxed and screened core hole. Employing theoretical modelling of XANES for studying the structure of boron‐containing glasses is thus possible. The core hole affects the spectrum significantly, especially in the pre‐edge region. In contrast to minerals, B K‐edge XANES of BPO₄ can be reproduced only if a self‐consistent potential is employed.     

X‐ray absorption study of the local structure at the NiO/oxide interfaces

This work reports an X‐ray absorption near‐edge structure (XANES) spectroscopy study at the Ni K‐edge in the early stages of growth of NiO on non‐ordered SiO₂, Al₂O₃ and MgO thin films substrates. Two different coverages of NiO on the substrates have been studied. The analysis of the XANES region shows that for high coverages (80 Eq‐ML) the spectra are similar to that of bulk NiO, being identical for all substrates. In contrast, for low coverages (1 Eq‐ML) the spectra differ from that of large coverages indicating that the local order around Ni is limited to the first two coordination shells. In addition, the results also suggest the formation of cross‐linking bonds Ni—O—M (M = Si, Al, Mg) at the interface.     

Temperature dependence of pre‐edge features in Ti K‐edge XANES spectra for ATiO3 (A = Ca and Sr), A2TiO4 (A = Mg and Fe), TiO2 rutile and TiO2 anatase

XANES (X‐ray absorption near‐edge structure) spectra of the Ti K‐edges of ATiO₃ (A = Ca and Sr), A₂TiO₄ (A = Mg and Fe), TiO₂ rutile and TiO₂ anatase were measured in the temperature range 20–900 K. Ti atoms for all samples were located in TiO₆ octahedral sites. The absorption intensity invariant point (AIIP) was found to be between the pre‐edge and post‐edge. After the AIIP, amplitudes damped due to Debye–Waller factor effects with temperature. Amplitudes in the pre‐edge region increased with temperature normally by thermal vibration. Use of the AIIP peak intensity as a standard point enables a quantitative comparison of the intensity of the pre‐edge peaks in various titanium compounds over a wide temperature range.     

K‐edge XANES analysis of sulfur compounds: an investigation of the relative intensities using internal calibration

Sulfur K‐edge XANES (X‐ray absorption near‐edge structure) spectroscopy is an excellent tool for determining the speciation of sulfur compounds in complex matrices. This paper presents a method to quantitatively determine the kinds of sulfur species in natural samples using internally calibrated reference spectra of model compounds. Owing to significant self‐absorption of formed fluorescence radiation in the sample itself the fluorescence signal displays a non‐linear correlation with the sulfur content over a wide concentration range. Self‐absorption is also a problem at low total absorption of the sample when the sulfur compounds are present as particles. The post‐edge intensity patterns of the sulfur K‐edge XANES spectra vary with the type of sulfur compound, with reducing sulfur compounds often having a higher post‐edge intensity than the oxidized forms. In dilute solutions (less than 0.3–0.5%) it is possible to use sulfur K‐edge XANES reference data for quantitative analysis of the contribution from different species. The results show that it is essential to use an internal calibration system when performing quantitative XANES analysis. Preparation of unknown samples must take both the total absorption and possible presence of self‐absorbing particles into consideration.     

An unconventional method for measuring the Tc L3‐edge of technetium compounds

Tc L₃‐edge XANES spectra have been collected on powder samples of SrTcO₃ (octahedral Tc⁴⁺) and NH₄TcO₄ (tetrahedral Tc⁷⁺) immobilized in an epoxy resin. Features in the Tc L₃‐edge XANES spectra are compared with the pre‐edge feature of the Tc K‐edge as well as other 4d transition metal L₃‐edges. Evidence of crystal field splitting is obvious in the Tc L₃‐edge, which is sensitive to the coordination number and oxidation state of the Tc cation. The Tc L₃ absorption edge energy difference between SrTcO₃ (Tc⁴⁺) and NH₄TcO₄ (Tc⁷⁺) shows that the energy shift at the Tc L₃‐edge is an effective tool for studying changes in the oxidation states of technetium compounds. The Tc L₃‐edge spectra are compared with those obtained from Mo and Ru oxide standards with various oxidation states and coordination environments. Most importantly, fitting the Tc L₃‐edge to component peaks can provide direct evidence of crystal field splitting that cannot be obtained from the Tc K‐edge.     

Investigation of annealing‐induced oxygen vacancies in the Co‐doped ZnO system by Co K‐edge XANES spectroscopy

To clarify the mechanism of the observed room‐temperature ferromagnetism (RTF), many studies have been focused on dilute magnetic semiconductor systems. Several investigations have demonstrated that oxygen vacancies play a significant role in mediating the RTF behavior so that much effort has been devoted to confirm their presence. In this investigation, X‐ray absorption spectroscopy was combined with ab initio calculations of the electronic structure of Co and Zn in the Zn_0.9Co_0.1O system before and after annealing, which has been recognized as an effective method of originating oxygen vacancies. A feature at about 20 eV after the rising edge of the Co K‐edge XANES that disappears after annealing has been associated with the presence of an oxygen vacancy located in the second shell surrounding the Co atom. Moreover, Zn K‐edge XANES spectra point out that this oxygen vacancy affects the electronic structure near the Fermi level, in agreement with density functional theory calculations.     

Extended X‐ray absorption fine structure and multiple‐scattering simulation of nickel dithiolene complexes Ni[S2C2(CF3)2]2n (n = −2, −1, 0) and an olefin adduct Ni[S2C2(CF3)2]2(1‐hexene)

A series of Ni dithiolene complexes Ni[S₂C₂(CF₃)]₂ⁿ (n = ?2, ?1, 0) ( 1 , 2 , 3 ) and a 1‐hexene adduct Ni[S₂C₂(CF₃)₂]₂(C₆H₁₂) ( 4 ) have been examined by Ni K‐edge X‐ray absorption near‐edge structure (XANES) and extended X‐ray absorption fine‐structure (EXAFS) spectroscopies. Ni XANES for 1 – 3 reveals clear pre‐edge features and approximately +0.7 eV shift in the Ni K‐edge position for `one‐electron' oxidation. EXAFS simulation shows that the Ni—S bond distances for 1 , 2 and 3 (2.11–2.16 Å) are within the typical values for square planar complexes and decrease by ～0.022 Å for each `one‐electron' oxidation. The changes in Ni K‐edge energy positions and Ni—S distances are consistent with the `non‐innocent' character of the dithiolene ligand. The Ni—C interactions at ～3.0 Å are analyzed and the multiple‐scattering parameters are also determined, leading to a better simulation for the overall EXAFS spectra. The 1‐hexene adduct 4 presents no pre‐edge feature, and its Ni K‐edge position shifts by ?0.8 eV in comparison with its starting dithiolene complex 3 . Consistently, EXAFS also showed that the Ni—S distances in 4 elongate by ～0.046 Å in comparison with 3 . The evidence confirms that the neutral complex is `reduced' upon addition of olefin, presumably by olefin donating the π‐electron density to the LUMO of 3 as suggested by UV/visible spectroscopy in the literature.     

Classification of Fe‐bearing species from K‐edge XANES data using two‐parameter correlation plots

Solid iron compounds are extremely common in the environment as well as in meteorites and comets. Fe K‐edge XANES (X‐ray absorption near‐edge structure) measurements can be carried out quickly, theoretically allowing one to categorize many areas within a sample or set of samples in a short time. However, interpretation of such data is not straightforward unless one has the appropriate reference spectra, hence a way of classifying an unknown spectrum to a family group (trivalent, divalent, oxide, silicate etc.) is required. Methods of abstracting Fe XANES spectra to produce pairs of variables which, when plotted, cluster in distinct regions depending on the family are presented. For instance, divalent minerals fall in a different region than trivalent minerals, and sulfides in a different region than oxides.     

Assessment of sulfur and iron speciation in a soil aggregate by combined S and Fe micro‐XANES: microspatial patterns and relationships

To test whether synchrotron‐based spectromicroscopy can be used to identify spatial patterns of sulfur (S) and iron (Fe) speciation as well as relationships between the speciation of S and Fe in soil colloids or aggregates at the micrometre and sub‐micrometre level, an anoxically prepared dissected soil aggregate (size ～1 mm³) was analyzed by µ‐XANES at the K‐edges of S (2472 eV) and Fe (7112 eV). The experiment included (i) elemental mapping at the S K‐edge (S, Si, Al) and the Fe K‐edge (Fe, Si), (ii) acquisition of 300 µm × 300 µm images of the region of interest with X‐ray energies of 2474 eV (addressing reduced organic and inorganic S), 2483 eV (total S), 7121 eV (divalent Fe) and 7200 eV (total Fe), as well as (iii) acquisition of S and Fe µ‐XANES spectra at two different positions, where image analysis suggested the dominance of reduced and oxidized S and Fe, respectively. Image analysis revealed a heterogeneous distribution of total Si, S and Fe as well as of different S and Fe species in the aggregate. Microregions which were either enriched in reduced or in oxidized S and Fe could be identified. A microregion with a large contribution of oxidized S (sulfate, sulfonate) to total S contained exclusively Fe(III) oxyhydroxides (probably ferrihydrite) as S‐bearing phase, whereas another microregion with a large contribution of reduced organic S (thiol, organic disulfide) to total S contained a small amount of Fe(II)‐bearing silicate in addition to the dominating Fe(III) oxyhydroxides. Our results show that combined S and Fe µ‐XANES is a powerful tool for studying microscale spatial patterns of S and Fe speciation as well as microscale relationships between the speciation of S and Fe in soil aggregates.     

SUT‐NANOTEC‐SLRI beamline for X‐ray absorption spectroscopy

The SUT‐NANOTEC‐SLRI beamline was constructed in 2012 as the flagship of the SUT‐NANOTEC‐SLRI Joint Research Facility for Synchrotron Utilization, co‐established by Suranaree University of Technology (SUT), National Nanotechnology Center (NANOTEC) and Synchrotron Light Research Institute (SLRI). It is an intermediate‐energy X‐ray absorption spectroscopy (XAS) beamline at SLRI. The beamline delivers an unfocused monochromatic X‐ray beam of tunable photon energy (1.25–10 keV). The maximum normal incident beam size is 13 mm (width) × 1 mm (height) with a photon flux of 3 × 10⁸ to 2 × 10¹⁰ photons s^?1 (100 mA)^?1 varying across photon energies. Details of the beamline and XAS instrumentation are described. To demonstrate the beamline performance, K‐edge XANES spectra of MgO, Al₂O₃, S₈, FeS, FeSO₄, Cu, Cu₂O and CuO, and EXAFS spectra of Cu and CuO are presented.     

Solid‐phase cadmium speciation in soil using L3‐edge XANES spectroscopy with partial least‐squares regression

Cadmium (Cd) has a high toxicity and resolving its speciation in soil is challenging but essential for estimating the environmental risk. In this study partial least‐square (PLS) regression was tested for its capability to deconvolute Cd L₃‐edge X‐ray absorption near‐edge structure (XANES) spectra of multi‐compound mixtures. For this, a library of Cd reference compound spectra and a spectrum of a soil sample were acquired. A good coefficient of determination (R²) of Cd compounds in mixtures was obtained for the PLS model using binary and ternary mixtures of various Cd reference compounds proving the validity of this approach. In order to describe complex systems like soil, multi‐compound mixtures of a variety of Cd compounds must be included in the PLS model. The obtained PLS regression model was then applied to a highly Cd‐contaminated soil revealing Cd₃(PO₄)₂ (36.1%), Cd(NO₃)₂·4H₂O (24.5%), Cd(OH)₂ (21.7%), CdCO₃ (17.1%) and CdCl₂ (0.4%). These preliminary results proved that PLS regression is a promising approach for a direct determination of Cd speciation in the solid phase of a soil sample.     

Magnesium K‐edge XANES spectroscopy of geological standards

Magnesium K‐edge X‐ray absorption near‐edge structure (XANES) spectra have been investigated to develop a systematic understanding of a suite of Mg‐bearing geological materials such as silicate and carbonate minerals, sediments, rocks and chemical reagents. For the model compounds the Mg XANES was found to vary widely between compounds and to provide a fingerprint for the form of Mg involved in geologic materials. The energy positions and resonance features obtained from these spectra can be used to specify the dominant molecular host site of Mg, thus shedding light on Mg partitioning and isotope fractionation in geologic materials and providing a valuable complement to existing knowledge of Mg geochemistry.     

Effect of atomic vibrations in XANES: polarization‐dependent damping of the fine structure at the Cu K‐edge of (creat)2CuCl4

Polarization‐dependent damping of the fine structure in the Cu K‐edge spectrum of creatinium tetrachlorocuprate [(creat)₂CuCl₄] in the X‐ray absorption near‐edge structure (XANES) region is shown to be due to atomic vibrations. These vibrations can be separated into two groups, depending on whether the respective atoms belong to the same molecular block; individual molecular blocks can be treated as semi‐rigid entities while the mutual positions of these blocks are subject to large mean relative displacements. The effect of vibrations can be efficiently included in XANES calculations by using the same formula as for static systems but with a modified free‐electron propagator which accounts for fluctuations in interatomic distances.     

X‐ray absorption spectroscopic study on gold particles formed on titania and alumina

X‐ray absorption near‐edge structure (XANES) measurements near the Au L₃ edge were made on Au(III) complex ions adsorbed on titania and alumina without a specific reducing agent. Compared with the XANES spectrum of a pure gold foil, the gold adsorbed on titania and alumina was found to be reduced to Au(0). The XANES method could obtain spectra of gold particles less than 1 nm in diameter, although a UV–visible absorption spectrum was difficult to observe with such samples. Copyright © 2003 John Wiley & Sons, Ltd.     

Iron speciation in ancient Attic pottery pigments: a non‐destructive SR‐XAS investigation

The present work reports a detailed investigation on the speciation of iron in the pigments of decorated pottery fragments of cultural heritage relevance. The fragments come from the Gioiosa Guardia archaeological site in the area of the `Strait of Messina' (Sicily, Southern Italy), and date back to VI–V century BC. The purpose of this study is to characterize the main pigmenting agents responsible for the dark‐red coloration of the specimens using non‐destructive analytical techniques such as synchrotron radiation X‐ray absorption spectroscopy (SR‐XAS), a well established technique for cultural heritage and environmental subjects. Absorption spectra were collected at the Fe K‐edge on the Italian beamline for absorption and diffraction (BM8‐GILDA) at the European Synchrotron Radiation Facility in Grenoble (France). In order to determine the speciation of Fe in the samples, principal component analysis and least‐squares fitting procedures were applied to the near‐edge part of the absorption spectra (XANES). Details on the local structure around the Fe sites were obtained by analyzing the extended part of the spectra (EXAFS). Furthermore, an accurate determination of the average Fe oxidation state was carried out through analysis of the pre‐edge peaks of the absorption spectra. Samples resulted composed of an admixture of Fe₂O₃ (hematite or maghemite) and magnetite (Fe₃O₄), occurring in different relative abundance in the dark‐ and light‐colored areas of the specimens. The results obtained are complementary to information previously obtained by means of instrumental neutron activation analysis, Fourier transform infrared absorbance and time‐of‐flight neutron diffraction.     

Extraction of local coordination structure in a low‐concentration uranyl system by XANES

Obtaining structural information of uranyl species at an atomic/molecular scale is a critical step to control and predict their physical and chemical properties. To obtain such information, experimental and theoretical L₃‐edge X‐ray absorption near‐edge structure (XANES) spectra of uranium were studied systematically for uranyl complexes. It was demonstrated that the bond lengths (R) in the uranyl species and relative energy positions (ΔE) of the XANES were determined as follows: ΔE₁ = 168.3/R(U—O_ax)² ? 38.5 (for the axial plane) and ΔE₂ = 428.4/R(U—O_eq)² ? 37.1 (for the equatorial plane). These formulae could be used to directly extract the distances between the uranium absorber and oxygen ligand atoms in the axial and equatorial planes of uranyl ions based on the U L₃‐edge XANES experimental data. In addition, the relative weights were estimated for each configuration derived from the water molecule and nitrate ligand based on the obtained average equatorial coordination bond lengths in a series of uranyl nitrate complexes with progressively varied nitrate concentrations. Results obtained from XANES analysis were identical to that from extended X‐ray absorption fine‐structure (EXAFS) analysis. XANES analysis is applicable to ubiquitous uranyl–ligand complexes, such as the uranyl–carbonate complex. Most importantly, the XANES research method could be extended to low‐concentration uranyl systems, as indicated by the results of the uranyl–amidoximate complex (～40 p.p.m. uranium). Quantitative XANES analysis, a reliable and straightforward method, provides a simplified approach applied to the structural chemistry of actinides.