Flexible X‐ray detector based on sliced lead iodide crystal

A promising flexible X‐ray detector based on inorganic semiconductor PbI₂ crystal is reported. The sliced crystals mechanically cleaved from an as‐grown PbI₂ crystal act as the absorber directly converting the impinging X‐ray photons to electron hole pairs. Due to the ductile feature of the PbI₂ crystal, the detector can be operated under a highly curved state with the strain on the top surface up to 1.03% and still maintaining effective detection performance. The stable photocurrent and fast response were obtained with the detector repeated bending to a strain of 1.03% for 100 cycles. This work presents an approach for developing efficient and cost‐effective PbI₂‐based flexible X‐ray detector.

     

X‐ray and neutron scattering on disordered nanosize clusters: a case study of lead‐zirconate‐titanate solid solutions

Defects and frequently used defect models of solids are reviewed. Signatures for identifying the disorder from x‐ray and neutron scattering data are given. To give illustrative examples how technologically important defects contribute to x‐ray and neutron scattering numerical method able to treat non‐periodical solids possessing several simultaneous defect types is given for simulating scattering in nanosize disordered clusters. The approach takes particle size, shape, and defects into account and isolates element specific signals. As a case study a statistical approximation model for lead‐zirconate titanate [Pb(Zr_xTi)O₃, PZT] is introduced. PZT is a material possessing several defect types, including substitutional, displacement and surface defects. Spatial composition variation is taken into account by introducing a model in which the edge lengths of each cell depend on the distribution of Zr and Ti ions in the cluster. Spatially varying edge lengths and angles is referred to as microstrain. The model is applied to compute the scattering from ellipsoid shaped PZT clusters and to simulate the structural changes as a function of average composition. Two‐phase co‐existence range, the so called morphotropic phase boundary composition is given correctly. The composition at which the rhombohedral and tetragonal cells are equally abundant was . Selected x‐ray and neutron Bragg reflection intensities and line shapes were simulated. Examples of the effect of size and shape of the scattering clusters on diffraction patterns are given and the particle dimensions, computed through Scherrer equation, are compared with the exact cluster dimensions. Scattering from two types of 180° domains in spherical particles, one type assigned to Ti‐rich PZT and the second to the MPB and Zr‐rich PZT, is computed. We show how the method can be used for modelling polarization reversal.

     

Pattern formation of colloidal suspensions by dip‐coating: An in situ grazing incidence X‐ray scattering study

Dip‐coating of a colloidal suspension is investigated in situ with microbeam grazing incidence small‐angle X‐ray scattering. We focus on the real‐time monitoring of a vertical dip‐coating process yielding insights into structural changes during pattern formation of the thin film. With the selected configuration a fixed spot on the sample surface is probed and the structural information at the time the contact line passes this spot is obtained, hence revealing the structure at the vicinity of the flowing meniscus owing to the microfocused beam. After dip‐coating the morphology is analyzed with atomic force microscopy, yielding real space information about the arrangement of individual nanoparticles at the film surface.

     

Mechanical detection of ultraslow,Debye‐like Li‐ion motions in LiAlO single crystals

Single crystalline LiAlO is known as a very poor ion conductor. Thus, in its crystalline form it unequivocally disqualifies itself from being a powerful solid electrolyte in modern energy storage systems. On the other hand, its interesting crystal structure proves beneficial to sharpen our understanding of Li ion dynamics in solids which in return might influence application‐oriented research. LiAlO allows us to apply and test techniques that are sensitive to extremely slow Li ion dynamics. This helps us clarifying their diffusion behaviour from a fundamental point of view. Here, we combined two techniques to follow Li ion translational hopping in LiAlO that can be described by the same physical formalism: dynamic mechanical relaxation and electrical relaxation, i.e., ionic conductivity measurements. Via both methods we were able to track the same transport mechanism in LiAlO. Moreover, this enabled us to directly probe extremely slow Li exchange rates at temperatures slightly above 430 K. The results were compared with recent insights from nuclear magnetic resonance spectroscopy. Altogether, an Arrhenius‐type Li diffusion process with an activation energy of ca. 1.12 eV was revealed over a large dynamic range covering 10 orders of magnitude, i.e., spanning a dynamic range from the nano‐second time scale down to the second time scale.

     

Theory of the Robin quantum wall in a linear potential. I. Energy spectrum,polarization and quantum‐information measures

Information‐theoretical concepts are employed for the analysis of the interplay between a transverse electric field applied to a one‐dimensional surface and Robin boundary condition (BC), which with the help of the extrapolation length Λ zeroes at the interface a linear combination of the quantum mechanical wave function and its spatial derivative, and its influence on the properties of the structure. For doing this, exact analytical solutions of the corresponding Schrödinger equation are derived and used for calculating energies, dipole moments, position and momentum quantum information entropies and their Fisher information and and Onicescu information energies and counterparts. It is shown that the weak (strong) electric field changes the Robin wall into the Dirichlet, (Neumann, ), surface. This transformation of the energy spectrum and associated waveforms in the growing field defines an evolution of the quantum‐information measures; for example, it is proved that for the Dirichlet and Neumann BCs the position (momentum) quantum information entropy varies as a positive (negative) natural logarithm of the electric intensity what results in their field‐independent sum . Analogously, at and the position and momentum Fisher informations (Onicescu energies) depend on the applied voltage as () and its inverse, respectively, leading to the field‐independent product (). Peculiarities of their transformations at the finite nonzero Λ are discussed and similarities and differences between the three quantum‐information measures in the electric field are highlighted with the special attention being paid to the configuration with the negative extrapolation length.

     

The final state of gravitational collapse in Eddington‐inspired Born‐Infeld theory

In this paper, we address the implications when a homogeneous dust model is considered for a scenario of gravitational collapse in the context of Eddington‐inspired Born‐Infeld (EiBI) theory. In order to describe the dynamical evolution of the collapse, we present an effective equation, which constitutes the first order corrections, in EiBI coupling parameter κ, to Einstein's field equations. The geometry outside the collapsing object is derived by imposing the standard Darmois‐Israel junction conditions at the boundary surface of the dust. This induces an effective matter source in the outer region which gives rise to a non‐singular, non‐Schwarzschild geometry at the final state of the collapse. For this exterior geometry, we find the threshold of mass for the formation of the black hole. This provides a cut‐off over κ as .

     

Pseudogap in the Eliashberg approach based on electron‐phonon and electron‐electron‐phonon interaction

The properties of the superconducting and the anomalous normal state were described by using the Eliashberg method. The pairing mechanism was reproduced with the help of the Hamiltonian, which models the electron‐phonon and the electron‐electron‐phonon interaction (EEPh). The set of the Eliashberg equations, which determines the order parameter function (φ), the wave function renormalization factor (Z), and the energy shift function (χ), was derived. It was proven that for the sufficiently large values of the EEPh potential, the doping dependence of the order parameter () has the analogous course to that observed experimentally in cuprates. The energy gap in the electron density of states is induced by Z and χ ‐ the contribution from φ is negligible. The electron density of states possesses the characteristic asymmetric form and the pseudogap is observed above the critical temperature.

     

TeV‐ and MeV‐Physics Out of an Model

The standard electroweak interaction is here re‐assessed to accommodate two different situations in Particle Physics. The first one is a ‐model at the TeV‐scale physics. The second one tackles the recent discussion of a possible fifth force mediated by a 17‐MeV X‐boson associated with an electron‐positron emission in the transition of an excited 8‐Beryllium to its ground state. The anomaly‐free model that provides these two scenarios is based on an ‐symmetry. It yields a new massive neutral boson, an exotic massive neutral fermion, right‐neutrinos and an additional neutral Higgs particle, which stems from a supplementary Higgs field, introduced along with the usual Higgs doublet responsible for the electroweak breaking and the masses of and Z⁰. Yukawa interactions of the two scalars generate the masses of the Standard Model leptons, neutrinos and a new exotic fermion of the model. The vacuum expectation values of the Higgses fix up two independent energy scales. One of them is the well‐confirmed electroweak scale, 246 GeV, whereas the other one is set up by adopting an experimental estimate for the ‐mass.     

Peculiarities of resonance fluorescence statistics for a two‐level atom in frequency selective feedback loop

A theoretical analysis of the resonance fluorescence of a two‐level atom in a classical monochromatic field with feedback phase switching depending on the fluorescence triplet component which the last spontaneously emitted photon belongs to is presented. The considered feedback loop is a hybrid quantum‐classical system. Statistics of photoemissions into the triplet components is investigated as well as correlations between the components. In contrast to the well‐known resonance fluorescence of a two‐level atom without feedback phase switching, a bunching of photocounts is predicted in each side‐band, and successive photoemissions into different side‐bands manifest antibunching. The type of the statistics can efficiently be controlled by the frequency detuning of the external field. In many points the considered feedback scheme provides drastically different statistical features of fluorescence when compared with the scheme of frequency‐unselective feedback phase switching.

     

Al‐density variation as one driving force for void formation in PERC solar cells

The reduction of void formation in local Al contact structures is of high interest in studies dealing with passivated emitter and rear contact (PERC) solar cells. So far, several processing parameters and their impact on local contact formation were investigated in detail. However, up to now density variation of Al in dependence on temperature and Si content in the melt were not taken into account as a principal reason for void formation. In this context the current assumption of a constant volume of the Al paste particles is discussed in more detail. Based on the results of energy dispersive X‐ray spectroscopy, void formation implies either an expansion of paste particles or their burst during contact formation.

     

Impact of strain induced by polymer curing in benzocyclobutene embedded semiconductor nanostructures

Polymers such as benzocyclobutene are commonly used as embedding materials for semiconductor nanostructures. During the curing process of the polymer up to 250 °C, a significant impact of strain can be induced on the embedded semiconductor material due to different thermal expansion coefficients. This strain has been revealed by X‐ray diffraction in free‐standing GaAs nanowires grown on a silicon substrate, embedded in a polymer matrix. It will be shown that this strain is released during the X‐ray irradiation if additionally an external static electric field is applied.

     

Orientations of ZnO grown on GaN

On semipolar epitaxial ZnO grown by chemical vapor deposition consists of two distinct orientations as evidenced by transmission electron microscopy and X‐ray diffraction. The initially grown ZnO on GaN follows the GaN lattice with the epitaxial relationship of // and The other oriented ZnO domains then grow on faceted with and with good coherency with the ‐oriented grains. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Accelerating,guiding, and sub‐wavelength trapping of neutral atoms with tailored optical vortices

Single neutral atom mechanics is controllable by focused, high‐intensity optical vortices. The intensity‐dependent, laser‐driven motion of the atom's active electrons subsumes to a net transfer of the orbital angular momentum of the light to the neutral atom. The ponderomotive force on these electrons translates so into an unbounded or a bounded radial drift of the atom depending on its initial kinetic energy, as set by the temperature. Appropriate combination of laser beams results in sub‐wavelength, dynamical radial traps for tweezing atoms controllably, an effect that can be exploited for atom guiding, structuring, and lithographic applications.

     

Finsler geometry of topological singularities for multi‐valued fields: Applications to continuum theory of defects

Topological singularity in a continuum theory of defects and a quantum field theory is studied from a viewpoint of differential geometry. The integrability conditions of singularity (Clairaut‐Schwarz‐Young theorem) are expressed by a torsion tensor and a curvature tensor when a Finslerian intrinsic parallelism holds for the multi‐valued function. In the context of the quantum field theory, the singularity called an extended object is expressed by the torsion when the intrinsic parallelism is related to the spontaneous breakdown of symmetry. In the continuum theory of defects, the path‐dependency of point and line defects within a crystal is interpreted by the non‐vanishing condition of torsion tensor in a non‐Riemannian space osculated from the Finsler space, and the domain is not simply connected. On the other hand, for the rotational singularity, an energy integral (J‐integral) around a disclination field is path‐independent when a nonlinear connection is single‐valued. This means that the topological expression for the sole defect (Gauss‐Bonnet theorem with genus ) is understood by the integrability of nonlinear connection.

     

Moiré superlattice effects in graphene/boron‐nitride van der Waals heterostructures

Van der Waals heterostructures of graphene and hexagonal boron nitride feature a moiré superlattice for graphene's Dirac electrons. Here, we review the effects generated by this superlattice, including a specific miniband structure featuring gaps and secondary Dirac points, and a fractal spectrum of magnetic minibands known as Hofstadter's butterfly.

     

Look fast: Crystallization of conjugated molecules during solution shearing probed in‐situ and in real time by X‐ray scattering

High‐speed solution shearing, in which a drop of dissolved material is spread by a coating knife onto the substrate, has emerged as a versatile, yet simple coating technique to prepare high‐mobility organic thin film transistors. Solution shearing and subsequent drying and crystallization of a thin film of conjugated molecules is probed in situ using microbeam grazing incidence wide‐angle X‐ray scattering (μGIWAXS). We demonstrate the advantages of this approach to study solution based crystal nucleation and growth, and identify casting parameter combinations to cast highly ordered and laterally aligned molecular thin films.

     

On decoherence in quantum gravity

It was previously argued that the phenomenon of quantum gravitational decoherence described by the Wheeler‐DeWitt equation is responsible for the emergence of the arrow of time. Here we show that the characteristic spatio‐temporal scales of quantum gravitational decoherence are typically logarithmically larger than a characteristic curvature radius of the background space‐time. This largeness is a direct consequence of the fact that gravity is a non‐renormalizable theory, and the corresponding effective field theory is nearly decoupled from matter degrees of freedom in the physical limit . Therefore, as such, quantum gravitational decoherence is too ineffective to guarantee the emergence of the arrow of time and the “quantum‐to‐classical” transition to happen at scales of physical interest. We argue that the emergence of the arrow of time is directly related to the nature and properties of physical observer.

     

P‐type tin‐oxide thin film transistors for blue‐light detection application

We reported the characteristics of p‐type tin‐oxide (SnO) thin film transistors (TFTs) upon illumination with visible light. Our p‐type TFT device using the SnO film as the active channel layer exhibits high sensitivity toward the blue‐light with a high light/dark read current ratio (I_light/I_dark) of 8.2 × 10³ at a very low driven voltage of <3 V. Since sensing of blue‐light radiation is very critical to our eyes, the proposed p‐type SnO TFTs with high sensitivity toward the blue‐light show great potential for future blue‐light detection applications.

     

Microstructural analysis of the cementation process during soiling on glass surfaces in arid and semi‐arid climates

To investigate the soiling behavior of solar energy systems like photovoltaics or concentrated solar power, glass samples were exposed to outdoor conditions in Doha, Qatar for one month. Soil formation on the glass was characterized at microstructural level using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Further, elemental analysis of the crust was done with energy‐dispersive X‐ray spectroscopy (EDX). Small fibrous structures were found on the glass surface and dust particles, providing evidence of a cementation process leading to a strong adhesion of airborne dust particles. In contrast to the common perception, that cementation occurs via the precipitation of salt (sodium chloride) these needle structures were found to be mainly composed of oxides of Si, Mg and Al. This indicates that cementation processes in desert regions are enhanced by the growth of fibrous clay minerals.

Cross section of cemented dust particle, connected via small needles to the glass surface.     

Sulfur impregnation of multi‐walled carbon nanotubes via SF6/NH3 plasma exposure

Plasma treatments are established methods to functionalise carbon nanotubes (CNTs) and modify their surface structure. This paper presents a mild glow‐discharge plasma treatment of aligned arrays of multi‐walled carbon nanotubes employing sulfur hexafluoride (SF₆), ammonia (NH₃), and their mixtures as process gases. For the latter, sulfur was detected at the tip and sidewalls of the nanotubes via energy‐dispersive X‐ray spectroscopy, while electron microscopy served as method to verify the structural integrity of the CNTs after the plasma treatment. This approach provides the basis for an easy and quick alternative to existing sulfur functionalisation methods of MWCNTs. Furthermore, the proposed method can conveniently be applied to carbon nanotube arrays on substrate while preserving their structure and alignment.

SEM‐EDX map of SF₆/NH₃ plasma‐treated multi‐walled carbon nanotubes on substrate. Green, yellow and red correspond to silicon, carbon and sulfur signals, respectively.