Kinetic Determination of the Gas‐Phase Decarbonylation of Butyraldehyde in the Presence of HCl Catalyst

The gas‐phase kinetics and mechanism of the homogeneous elimination of CO from butyraldehyde in the presence of HCl has been experimentally studied. The reaction is homogeneous and follows the second‐order kinetics with the following rate expression: log k ₁ (s⁻¹ L mol⁻¹) = (13.27 ± 0.36) – (173.2 ± 4.4) kJ mol⁻¹(2.303RT )⁻¹. Experimental data suggested a concerted four‐membered cyclic transition state type of mechanism. The first and rate‐determining step occurs through a four‐membered cyclic transition state to produce propane and formyl chloride. The formyl chloride intermediate rapidly decomposes to CO and HCl gases.     

Kinetics of the gas‐phase elimination of α‐Bromophenylacetic acid under maximum inhibition

The gas phase elimination kinetics of the title compound was studied over the temperature range of 260.1–315.0°C and pressure range of 20–70 Torr. This elimination, in seasoned static reaction system and in the presence of at least fourfold of the free radical inhibitor toluene, is homogeneous, unimolecular and follows a first‐order rate law. The reaction yielded mainly benzaldehyde, CO, and HBr, and small amounts of benzylbromide and CO₂. The observed rate coefficients are expressed by the following Arrhenius equations: For benzaldehyde formation: log k₁ (s⁻¹) = (12.23 ± 0.26) − (164.9 ± 2.7) kJ mol⁻¹ (2.303 RT)⁻¹ For benzylbromide formation: log k₁ (s⁻¹) = (13.82 ± 0.50) − (192.8 ± 5.5) kJ mol⁻¹ (2.303 RT)⁻¹ The mechanisms are believed to proceed through a semi‐polar five‐membered cyclic transition state for the benzaldehyde formation, while a four‐centered cyclic transition state for benzylbromide formation. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 725–728, 1999     

A Kinetic Study on the Reduction of Cyanocobalamin with Titanium(III) Chloride

The reaction rate for the reduction of cyanocobalamin (B₁₂) with Ti(III) in HCl and KCl solutions at constant ionic strength was followed by spectrophotometric measurements at 15°, 20°, 25° and 30°C. The reaction rats was found to be of pseudo-first-order with respect to B₁₂ and of second-order with respect to B₁₂ and Ti(III) in HCl solutions. The second-order rate constant was given by for the processes, The values of K₀ obtained were 0.80∼1.29 liter mole⁻¹ sec⁻¹ in the range of ionic strength 0.2∼0.5 M at 30°. The average activation energy was 20.5 kcal mole⁻¹.     

Kinetics of the reaction of the sulfate radical with the oxalate anion

The kinetics of the reaction of the sulfate radical, SO₄⁻, with the oxalate anion C₂O₄²⁻ was studied in aqueous solution and second-order rate constants, corrected for the effects of ionic strength, derived. Measurements were carried out over the temperature range 24–60°C resulting in the expression k₀ = 2.10 ± 0.96 × 10⁸ exp(−1080 ± 140/T) L mol⁻¹ s⁻¹. © 1996 John Wiley & Sons, Inc.     

Living Anionic Polymerization of N-Methacryloyl-2-methylaziridine

Anionic polymerization of N-methacryloyl-2-methylaziridine ( 1 ) proceeded with 1,1-diphenyl-3-methylpentyllithium (DMPLi) in the presence of LiCl or Et₂Zn to give the polymers possessing predicted molecular weights and narrow molecular weight distributions (M_w/M_n < 1.1) at −78 ∼ −40 °C in THF. In each polymerization initiated with DMPLi/LiCl at the various temperatures ranging from −40 to −60 °C, the linear relationship between polymerization time and conversion of monomer was obtained from the GLC analysis. The rate constant and the activation energy of the anionic polymerization for 1 were determined as follows: ln k = −5.85 × 10³/T + 23.3 L mol⁻¹ s⁻¹ and 49 ± 4 kJ mol⁻¹, respectively. Poly( 1 ) showed the glass transition temperature at 98 °C, and gave the insoluble product at higher temperature around 150 °C through the thermal cross-linking of highly strained N-acyl-aziridine moiety.     

Temperature dependence of the rate constants of the reactions of oxygen atoms with 1-pentene, 1-hexene,cis-2-pentene,and trans-2-pentene

The kinetics of the reactions of ground state oxygen atoms with 1-pentene, 1-hexene, cis-2-pentene, and trans-2-pentene was investigated in the temperature range 200 to 370 K. In this range the temperature dependences of the rate constants can be represented by k = A′ Tⁿ exp(− E′_a/RT) with A′ = (1.0 ± 0.6) · 10⁻¹⁴ cm³ s⁻¹, n = 1.13 ± 0.02, E′_a = 0.54 ± 0.05 kJ mol⁻¹ for 1-pentene: A′ = (1.3 ± 1.2) · 10⁻¹⁴ cm³ s⁻¹, n = 1.04 ± 0.08, E′_a = 0.2 ± 0.4 kJ mol⁻¹ for 1-hexene; A′ = (0.6 ± 0.6) · 10⁻¹⁴ cm³ s⁻¹, n = 1.12 ± 0.05, E′_a = − 3.8 ± 0.8 kJ mol⁻¹ for cis-2-pentene; and A′ = (0.6 ± 0.8) · 10⁻¹⁴ cm³ s⁻¹, n = 1.14 ± 0.06, E′_a = − 4.3 ± 0.5 kJ mol⁻¹ for trans-2-pentene. The atoms were generated by the H₂-laser photolysis of NO and detected by time resolved chemiluminescence in the presence of NO. The concentrations of the O(³P) atoms were kept so low that secondary reactions with products are unimportant. © 1997 John Wiley & Sons, Inc.     

Osmium (VIII) catalyzed kinetics and mechanism of indoles oxidation with Aryl-N-haloamines in alkaline medium

The kinetics of oxidation of the title substrates by sodium N-haloarylsulfonamides (or ary-N-haloamines), chloramine-T (CAT), bromamine-T (BAT), chloramine-B (CAB), and bromamine-B (BAB), catalyzed by osmium(VIII) in alkaline medium has been studied at 30°C. The corresponding oxindoles and arylsulfonamides have been characterized as reaction products. The reaction rate shows a first-order dependence each on |indole|₀ and |oxidant|₀, a fractional-order on |Os(VIII)|, and an inverse first-order on |OH⁻|. Addition of arylsulfon-amide, chloride and bromide, and variation of ionic strength of the medium have no effect on the reaction rate. There is a negative effect of dielectric constant of the solvent. Activation parameters have been calculated from the Arrhenius and Eyring plots. Hammett correlation of substituent effects indicates an LFE relationship with ρ = −1.0, showing the formation of an electron deficient transition state. From enthalpy-entropy relationships and Exner correlations, the isokinetic temperatures (333 K and 326 K) have been determined for the reactions of CAT and BAT, respectively. Proton inventory studies in H₂O-D₂O mixtures have shown the involvement of a single exchangeable proton of OH⁻ ion in the transition state. A mechanism consistent with the observed kinetics has been proposed. © 1996 John Wiley & Sons, Inc.     

Kinetics and mechanism of the formation of poly[(1,1,3,3-tetramethyldisiloxanyl)ethylene] and poly(methyldecylsiloxane) by hydrosilylation

The kinetics of the formation of poly(carbosiloxane), as well as of alkyl-substituted poly(siloxane), by Karstedt's catalyst catalyzed hydrosilylation were investigated. Linear poly(carbosiloxane), poly[(1,1,3,3-tetramethyldisiloxanyl)ethylene], (PTMDSE), was obtained by hydrosilylation of 1,3-divinyltetramethyldisiloxane (DVTMDS) and 1,1,3,3-tetramethyldisiloxane (TMDS), while alkyl-substituted poly(siloxane), poly(methyldecylsiloxane), (PMDS), was synthesized by hydrosilylation of poly(methylhydrosiloxane) (PMHS) and 1-decene. To investigate the kinetics of PTMDSE formation, two series of experiments were performed at reaction temperatures ranging from 25 to 56 °C and with catalyst concentrations ranging from 7.0 × 10⁻⁶ to 3.1 × 10⁻⁵ mol Pt/mol CHCH₂. A series of experiments was performed at reaction temperatures ranging from 28 to 48 °C, with catalyst concentrations of 7.0 ×10⁻⁶ mol of Pt per mol of CHCH₂, when kinetics of PMDS formation was investigated. All reactions were carried out in bulk, with equimolar amounts of the reacting Si H and CHCH₂ groups. The course of the reactions was monitored by following the disappearance of the Si H bands using quantitative infrared spectroscopy. The results obtained showed typical first order kinetics for the PTMDSE formation, consistent with the proposed reaction mechanism. In the case of PMDS an induction period occurred at lower reaction temperatures, but disappeared at 44 °C and the rate of Si H conversion also started to follow the first-order kinetics. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2246–2258, 2007     

Mechanism and Kinetics of the Reaction of Nitrosamines with OH Radical: A Theoretical Study

The reaction of nitrosodimethylamine, nitrosoazetidine, nitrosopyrrolidine, and nitrosopiperidine with the hydroxyl radical has been studied using electronic structure calculations in gas and aqueous phases. The rate constant was calculated using variational transition state theory. The reactions are initiated by H‐atom abstraction from the αC─H group of nitrosamines and leads to the formation of alkyl radical intermediate. In the subsequent reactions, the initially formed alkyl radical intermediate reacts with O₂ forming a peroxy radical. The reaction of peroxy radical with other atmospheric oxidants, such as HO₂ and NO radicals, is studied. The structures of the reactive species were optimized by using the density functional theory methods, such as M06‐2X, MPW1K, and BHandHLYP, and hybrid methods G3B3. The single‐point energy calculations were also performed at CCSD(T)/6‐311+G(d,p)// M062X/6‐311+G(d,p) level. The calculated thermodynamical parameters show that the reactions corresponding to the formation of intermediates and products are highly exothermic. We have calculated the rate constant for the initial H‐atom abstraction and subsequent favorable secondary reactions using canonical variational transition state theory over the temperature range of 150–400 K. The calculated rate constant for initial H‐atom abstraction reaction is ∼3 × 10⁻¹² cm³ molecule⁻¹ s⁻¹ and is in agreement with the previous experimental results. The calculated thermochemical data and rate constants show that the reaction profile and kinetics of the reactions are less dependent on the number of methyl groups present in the nitrosoamines. Furthermore, it has been found that the atmospheric lifetime of nitrosamines is around 5 days in the normal atmospheric OH concentration.     

Kinetic and thermochemical characteristics of the dissociation of Mo(CO)6 and W(CO)6

The thermal dissociation of gaseous Mo(CO)₆ and W(CO)₆ in an argon carrier gas, Mo(CO)₆ → Mo(CO)₅ + CO (1) and W(CO)₆ → W(CO)₅ + CO (2), is studied over temperature ranges of ∼585–685 K for (1) and ∼690−810 K for (2) at a total gas concentrations of 4 × 10⁻⁶ and 4 × 10⁻⁵ mol/cm³ by using the shock tube technique in conjunction with absorption spectrophotometry. The measured rate constants are extrapolated to the high-pressure limit by means of a newly developed procedure, with the resultant expressions for the indicated temperature ranges reading as k_d1,∞(T),[s⁻¹] = 10^{16.12 ± 0.68}exp[(−148.8 ± 8.1 kJ/mol)/RT] and k_d2,∞(T),[s⁻¹] = 10^{15.93 ± 0.63}exp[(−171.7 ± 8.9 kJ/mol)/RT]. Comparison of the high-pressure dissociation rate constants with the published data revealed a considerable discrepancy, a tentative explanation of which is given. Based on the obtained high-pressure dissociation rate constants and the available data on the high-pressure room-temperature rate constants for the reverse reaction of recombination, the first bond dissociation energies for these molecules are evaluated and compared with previous determinations, both theoretical and experimental. The enthalpies of formation of Mo(CO)₅ and W(CO)₅ are determined: Δ_fH°(Mo(CO)₅, g, 298.15 K) = −644.1 ± 5.6 kJ/mol and Δ_fH°(W(CO)₅, g, 298.15 K) = −581.9 ± 6.6 kJ/mol. Based on the enthalpies of formation of Mo(CO)₅, W(CO)₅, Mo(CO)₆, and W(CO)₆, and the published molecular parameters of these four species, their thermochemical functions are calculated and presented in the form of NASA seven-term polynomials.     

Ag(I)‐Catalyzed Chlorination of Linezolid during Water Treatment: Kinetics and Mechanism

The kinetic and mechanistic study of Ag(I)‐catalyzed chlorination of linezolid (LNZ) by free available chlorine (FAC) was investigated at environmentally relevant pH 4.0–9.0. Apparent second‐order rate constants decreased with an increase in pH of the reaction mixture. The apparent second‐order rate constant for uncatalyzed reaction, e.g., k″_app = 8.15 dm³ mol⁻¹ s⁻¹ at pH 4.0 and k″_app. = 0.076 dm³ mol⁻¹ s⁻¹ at pH 9.0 and 25 ± 0.2°C and for Ag(I) catalyzed reaction total apparent second‐order rate constant, e.g., k″_app = 51.50 dm³ mol⁻¹ s⁻¹ at pH 4.0 and k″_app. = 1.03 dm³ mol⁻¹ s⁻¹ at pH 9.0 and 25 ± 0.2°C. The Ag(I) catalyst accelerates the reaction of LNZ with FAC by 10‐fold. A mechanism involving electrophilic halogenation has been proposed based on the kinetic data and LC/ESI/MS spectra. The influence of temperature on the rate of reaction was studied; the rate constants were found to increase with an increase in temperature. The thermodynamic activation parameters E_a, ΔH^#, ΔS^#, and ΔG^# were evaluated for the reaction and discussed. The influence of catalyst, initially added product, dielectric constant, and ionic strength on the rate of reaction was also investigated. The monochlorinated substituted product along with degraded one was formed by the reaction of LNZ with FAC.     

Kinetic study of the reactions Br + IBr→I + Br2 and I + Br2→Br + IBr

The kinetics of the title reactions have been studied using the discharge-flow mass spectrometic method at 296 K and 1 torr of helium. The rate constant obtained for the forward reaction Br+IBr→I+Br₂ (1), using three different experimental approaches (kinetics of Br consumption in excess of IBr, IBr consumption in excess of Br, and I formation), is: k₁=(2.7±0.4)×10⁻¹¹ cm³ molecule⁻¹s⁻¹. The rate constant of the reverse reaction: I+Br₂→Br+IBr (−1) has been obtained from the Br₂ consumption rate (with an excess of I atoms) and the IBr formation rate: k₋₁=(1.65±0.2)×10⁻¹³ cm³molecule⁻¹s⁻¹. The equilibrium constant for the reactions (1,−1), resulting from these direct determinations of k₁ and k₋₁ and, also, from the measurements of the equilibrium concentrations of Br, IBr, I, and Br₂, is: K₁=k₁/k₋₁=161.2±19.7. These data have been used to determine the enthalpy of reaction (1), ΔH₂₉₈°=−(3.6±0.1) kcal mol⁻¹ and the heat of formation of the IBr molecule, ΔH_f,298°(IBr)=(9.8±0.1) kcal mol⁻¹. © 1998 John Wiley & sons, Inc. Int J Chem Kinet 30: 933–940, 1998     

High‐Temperature Rate Constants for H + Tetramethylsilane and H + Silane and Implications about Structure–Activity Relationships for Silanes

The shock‐tube technique has been used to investigate the reactions H + SiH₄ → H₂ + SiH₃ (R1) and H + Si(CH₃)₄ → Si(CH₃)₃CH₂ + H₂ (R2) behind reflected shock waves. C₂H₅I was used as a thermal in situ source for H atoms. For reaction (R1), the experiments covered a temperature range of 1170–1251 K and for (R2) 1227–1320 K. In both cases, the pressures were near 1.5 bar. In these experiments, H atoms were monitored with atomic resonance absorption spectrometry. Fits to the H‐atom temporal concentration profiles applying postulated chemical kinetic reaction mechanisms were used for determining the rate constants k₁ and k₂. Experimental rate constants were well represented by the Arrhenius equations k₁(T) = 2.75 × 10⁻⁹ exp(−37.78 kJ mol⁻¹/RT) cm³ s⁻¹ and k₂(T) = 1.17 × 10⁻⁷ exp(−86.82 kJ mol⁻¹/RT) cm³ s⁻¹. Transition state theory (TST) calculations based on CBS‐QB3 and G4 levels of theory show good agreement with experimentally obtained rate constants; the experimental values for k₁ and k₂ are ∼40% lower and ∼50% larger than theoretical predictions, respectively. For the development of a mechanism describing the thermal decomposition of tetramethylsilane (Si(CH₃)₄; TMS), also TST‐based rate constants for reaction CH₃ + Si(CH₃)₄ → Si(CH₃)₃CH₂ + CH₄ (R3) were calculated. A comparison between experimental and theoretical rate constants k₂ and k₃ with available rate constants from the literature indicates that Si(CH₃)₄ has very similar reactivity toward H abstractions like neopentane (C(CH₃)₄), which is the analog hydrocarbon to TMS. Based on these results, the possibility of drawing reactivity analogies between hydrocarbons and structurally similar silicon‐organic compounds for H‐atom abstractions is discussed.     

Kinetic study of some reactions related to the Mn(II)-catalyzed bromate-saccharide oscillating reactions

In the stirred batch experiment, the Mn(II)-catalyzed bromate-saccharide reaction in aqueous H₂SO₄ or HClO₄ solution exhibits damped oscillations in the concentrations of bromide and Mn(II) ions. Peculiar multiple oscillations are observed in the system with arabinose or ribose. The apparent second-order rate constants of the Mn(III)-saccharide reactions at 25°C are (0.659, 1.03, 1.76, 2.32, and 6.95) M⁻¹ s⁻¹ in 1.00 M H₂SO₄ and (4.69, 7.51, 10.2, 13.5, and 36.2) M⁻¹ s⁻¹ in (2.00–4.00) M HClO₄ for (glucose, galactose, xylose, arabinose, and ribose), respectively. At 25°C, the observed pseudo-first-order rate constant of the Mn(III)-Br⁻ reaction is k_obs = (0.2 ± 0.1) [Br⁻] + (130 ± 5)[Br⁻]² + (2.6 ± 0.1) × 10³[Br⁻]³ + (1.2 ± 0.2) × 10⁴[Br⁻]⁴ s⁻¹ and the rate constant of the Br₂ Mn(II) reaction is less than 1 × 10⁻⁴ M⁻¹ s⁻¹. The second-order rate constants of the Br₂-saccharide reactions are (3.65 ± 0.15, 11.0 ± 0.5, 4.05, 12.5 ± 0.7, and 2.62) × 10⁻⁴ M⁻¹ s⁻¹ at 25°C for glucose, galactose, xylose, arabinose, and ribose, respectively.     

Nucleophilic Addition to CC Bonds,Part X

A mechanistic model is presented for the base‐catalyzed intramolecular cyclization of polycyclic unsaturated alcohols of type A to ethers D (Scheme 1). The alkoxide anion B is formed first in a fast acid‐base equilibrium. For the subsequent reaction to D , a carbanion‐like transition state C is proposed. This mechanism is in full agreement with our results regarding the influence of substituents on the regioselectivity and the rate of cyclization. We studied the effect of alkyl substituents in allylic position (alkylated endocylic olefinic alcohols 1 – 3 ) and, especially, at the exocyclic double bond ( 12 – 15 ). The fastest cyclization (k_rel=1) is 12 → 16 , which proceeds via a primary carbanion‐like transition state ( E : R¹=R²=H). The corresponding processes 13 → 17 and 14 → 17 are characterized by a less‐stable secondary carbanion‐like transtition state ( E : R¹=Me, R²=H, or vice versa) and are slower by a factor of 10⁴. The slowest reaction (k_rel ca. 10⁻⁶) is the cyclization 15 → 18 via a tertiary carbanion‐like transition state ( E : R¹=R²=Me).     

Polymerized ionic liquids: Effects of counter‐anions on ion conduction and polymerization kinetics

A novel imidazolium‐containing monomer, 1‐[ω‐methacryloyloxydecyl]‐3‐(n‐butyl)‐imidazolium (1BDIMA), was synthesized and polymerized using free radical and controlled free radical polymerization followed by post‐polymerization ion exchange with bromide (Br), tetrafluoroborate (BF₄), hexafluorophosphate (PF₆), or bis(trifluoromethylsulfonyl)imide (Tf₂N). The thermal properties and ionic conductivity of the polymers showed a strong dependence on the counter‐ions and had glass transition temperatures (T_g) and ion conductivities at room temperature ranging from 10 °C to −42 °C and 2.09 × 10⁻⁷ S cm⁻¹ to 2.45 × 10⁻⁵ S cm⁻¹. In particular, PILs with Tf₂N counter‐ions showed excellent ion conductivity of 2.45 × 10⁻⁵ S cm⁻¹ at room temperature without additional ionic liquids (ILs) being added to the system, making them suitable for further study as electro‐responsive materials. In addition to the counter‐ions, solvent was found to have a significant effect on the reversible addition‐fragmentation chain‐transfer polymerization (RAFT) for 1BDIMA with different counter‐ions. For example, 1BDIMATf₂N would not polymerize in acetonitrile (MeCN) at 65 °C and only achieved low monomer conversion (< 5%) at 75 °C. However, 1BDIMA‐Tf₂N proceeded to high conversion in dimethylformamide (DMF) at 65 °C and 1BDIMABr polymerized significantly faster in DMF compared to MeCN. NMR diffusometry was used to investigate the kinetic differences by probing the diffusion coefficients for each monomer and counter‐ion in MeCN and DMF. These results indicate that the reaction rates are not diffusion limited, and point to a need for deeper understanding of the role electrostatics plays in the kinetics of free radical polymerizations. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1346–1357     

The kinetics of the gas phase intramolecular elimination of isobutene from 2-d1-triisobutylaluminum and the deuterium isotope effect in reactions involving cyclic transition states

The intramolecular elimination of isobutene from 2-d₁-triisobutylaluminum has been studied in the gas phase for temperatures ranging between 102.4 and 184.6°C. The reaction is apparently homogeneous and obeys the first order rate law, yielding the following Arrhenius relationship: Excess ethylene was added to the starting material in order to avoid complications from the backreaction. The cyclic 4-center nature of the transition state proposed earlier has been unequivocally demonstrated by deuterium labelling. Mass-spectral analyses show that the isobutene formed contains no deuterium. The hydrolyses products of the mixed trialkylaluminum formed during the reaction consist of monodeuteroethane and 2-d₁-isobutane. The observed negative entropy of activation of ～12 cal/°-mole agrees with prediction and implies a reasonably tight transition state structure. Combined with the corresponding data for the non deuterized Al(i-bu)₃ reported earlier, these data result in a primary kinetic deuterium isotope effect of k_H/k_D = 1.3 × 10^0.6/θ corresponding to a ratio of the isotopic rate constants of 3.7 at 25°C. This result is in excellent agreement with a predicted value of 1.4 × 10^0.7/θ and it is in line with literature data on similar reactions involving cyclic transition state complexes.     

In Situ Ellipsometry Measurements on the Halide Phase Segregation of Mixed Halide Lead Perovskites**

Methylammonium lead iodide bromides MAPb(Br_xI_1-x)₃ are a class of mixed halide lead perovskites, materials that offer high-power conversion efficiencies and bandgap tunability. For these reasons, they are a promising absorber material for future solar cells, although their use is still limited due to several factors. The reversible phase segregation under even low light intensities is one of them, lowering the effective bandgap due to local segregation into iodide-rich and bromide-rich phases. While several studies have been done to illuminate the mechanism and suppression of phase segregation, challenges remain to understand its kinetics. We obtained dynamic ellipsometric measurements from x=0.5 mixed halide lead perovskite thin films protected by a polystyrene layer under green laser light with a power density of ∼11 W/cm². Time constants between 1.7(±0.7)×10⁻³ s⁻¹ for the segregation and 1.5(±0.6)×10⁻⁴ s⁻¹ for recovery were calculated. The phase segregation rate constants are surprisingly two orders of magnitude slower than and the recovery rate is consistent with those measured using photoluminescence methods under similar conditions. These results confirm a concern in the literature about the complexity in the phase separation kinetics measured from photoluminescence. We expect ellipsometry to serve as a complementary technique to other spectroscopies in studying mixed-halide lead perovskites phase segregation in the future.     

Kinetics and mechanism of the Cl + CO reaction in air

Long-path FTIR spectroscopy was used to study the kinetics and mechanism of the reaction of Cl atoms with CO in air. The relative rate constants at 298 K and 760 torr for the forward direction of the reaction of Cl with ¹³CO and the reaction of Cl¹³CO with O₂ were k₁ = (3.4 ± 0.8) × 10⁻¹⁴ cm³ molecule⁻¹ s⁻¹ and k₂ = (4.3 ± 3.2) × 10⁻¹³ cm³ molecule⁻¹ s⁻¹, respectively (all uncertainty limits are 2σ). The rate constant for the net loss of ¹³CO due to reaction with Cl in 1 atm of air at 298 K was k_Cl+COobs = (3.0 ± 0.6) × 10⁻¹⁴ cm³ molecule⁻¹ s⁻¹. The only observed carbon-containing product of the Cl + ¹²CO reaction was ¹²CO₂, with a yield of 109 ± 18%. Our results are in good agreement with extrapolations from previous studies. The reaction mechanism and the implications for laboratory studies and tropospheric chemistry are discussed. © 1996 John Wiley & Sons, Inc.     

Theoretical and experimental studies of the diketene system: Product branching decomposition rate constants and energetics of isomers

The kinetics and mechanism for the thermal decomposition of diketene have been studied in the temperature range 510–603 K using highly diluted mixtures with Ar as a diluent. The concentrations of diketene, ketene, and CO₂ were measured by FTIR spectrometry using calibrated standard mixtures. Two reaction channels were identified. The rate constants for the formation of ketene (k₁) and CO₂ (k₂) have been determined and compared with the values predicted by the Rice–Ramsperger–Kassel–Marcus (RRKM) theory for the branching reaction. The first-order rate constants, k₁ (s⁻¹) = 10^{15.74 ± 0.72} exp(−49.29 (kcal mol⁻¹) (±1.84)/RT) and k₂ (s⁻¹) = 10^{14.65 ± 0.87} exp(−49.01 (kcal mol⁻¹) (±2.22)/RT); the bulk of experimental data agree well with predicted results. The heats of formation of ketene, diketene, cyclobuta-1,3-dione, and cyclobuta-1,2-dione at 298 K computed from the G2M scheme are −11.1, −45.3, −43.6, and −40.3 kcal mol⁻¹, respectively. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 580–590, 2007