Lanthanide and uranium complexes with an SPS-based pincer ligand

Reactions of Ln(BH4)3(THF)n and [Li(Et2O)]SPS(Me)], the lithium salt of an anionic SPS pincer ligand composed of a central hypervalent lambda4-phosphinine ring bearing two ortho-positioned diphenylphosphine sulfide sidearms, led to the monosubstituted compounds [Ln(BH4)2(SPS(Me))(THF)2] [Ln = Ce (1), Nd (2)], while the homoleptic complexes [Ln(SPS(Me))3] [Ln = Ce (3), Nd (4)] were obtained by treatment of LnX3 (X = I, BH4) with [K(Et2O)][SPS(Me)]. The [UX2(SPS(Me))2] complexes [X = Cl (5), BH4 (6)] were isolated from reactions of UX4 and the lithium or potassium salt of the [SPS(Me)]- anion. The X-ray crystal structures of 1.1.5THF, 2.1.5THF, 3.2THF.2Et2O, and 5.4py reveal that the flexible tridentate [SPS(Me)]- anion is bound to the metal as a tertiary phosphine with electronic delocalization within the unsaturated parts of the ligand.     

Synthesis and structural characterisation of a novel phosphine-borane-stabilised dicarbanion and an unusual bis(phosphine-borane)

The reaction between the phosphine-borane-substituted alkene [Pr(n)(2)P(BH(3))](Me(3)Si)C[double bond]CH(2) and elemental lithium in THF yields the complex [(pmdeta)Li[Pr(n)(2)P(BH(3))](Me(3)Si)CCH(2)](2)(2b) after recrystallisation; an X-ray crystallographic study of 2b reveals that the lithium is bound to the BH(3) hydrogens of the ligand, with no Li-C(carbanion) contact.     

Reaction of InCl3 with various reducing agents: InCl3-NaBH4-mediated reduction of aromatic and aliphatic nitriles to primary amines

While alternative methods of preparing dichloroindium hydride (HInCl(2)) via the in situ reduction of InCl(3) using lithium amino borohydride (LAB) were explored, generation of HInCl(2) from the reduction of InCl(3) by sodium borohydride (NaBH(4)) was also re-evaluated for comparison. The reductive capability of the InCl(3)/NaBH(4) system was found to be highly dependent on the solvent used. Investigation by (11)B NMR spectroscopic analyses indicated that the reaction of InCl(3) with NaBH(4) in THF generates HInCl(2) along with borane-tetrahydrofuran (BH(3)·THF) in situ. Nitriles underwent reduction to primary amines under optimized conditions at 25 °C using 1 equiv of anhydrous InCl(3) with 3 equiv of NaBH(4) in THF. A variety of aromatic, heteroaromatic, and aliphatic nitriles were reduced to their corresponding primary amine in 70-99% isolated yields. Alkyl halide and nitrile functional groups were reduced in tandem by utilizing the reductive capabilities of both HInCl(2) and BH(3)·THF in a one-pot reaction. Finally, the selective reduction of the carbon bromine bond in the presence of nitriles was achieved by generating HInCl(2) via the reduction InCl(3) with NaBH(4) in CH(3)CN or with lithium dimethylaminoborohydride (MeLAB) in THF.     

Coupling of coordinated 2-iminophosphorano-1-phosphaallyl leading to bridged iminophosphoranato complexes of zirconium and hafnium

Reaction of MCl4 (M = Zr, Hf) with 2 equiv of 2-iminophosphorano-1-phosphaallyl lithium [Li[P(Ph)C(=CHPh)P(Me)2=NSiMe3](THF)1.5] (1) affords ligand coupling complexes 3 and 4, respectively, while similar treatment of ZrCl4 with [Li[P(Ph)C(=C(SiMe2Bu(t))Ph)P(Me)2=NSiMe3](THF)2] (2) yields ligand transfer complex 5.     

Li-Na ternary amidoborane for hydrogen storage: experimental and first-principles study

Li-Na ternary amidoborane, Na[Li(NH(2)BH(3))(2)], was recently synthesized by reacting LiH and NaH with NH(3)BH(3). This mixed-cation amidoborane shows improved dehydrogenation performance compared to that of single-cation amidoboranes, i.e., LiNH(2)BH(3) and NaNH(2)BH(3). In this paper, we synthesized the Li-Na ternary amidoborane by blending and re-crystallizing equivalent LiNH(2)BH(3) and NaNH(2)BH(3) in tetrahydrofuran (THF), and employed first-principles calculations and the special quasirandom structure (SQS) method to theoretically explore the likelihood for the existence of Li(1-x)Na(x)(NH(2)BH(3)) for various Li/Na ratios. The thermodynamic, electronic and phononic properties were investigated to understand the possible dehydrogenation mechanisms of Na[Li(NH(2)BH(3))(2)].     

Synthesis, structures and stabilities of thioanisole-functionalised phosphido-borane complexes of the alkali metals

Treatment of the secondary phosphine {(Me(3)Si)(2)CH}PH(C(6)H(4)-2-SMe) with BH(3)·SMe(2) gives the corresponding phosphine-borane {(Me(3)Si)(2)CH}PH(BH(3))(C(6)H(4)-2-SMe) (9) as a colourless solid. Deprotonation of 9 with n-BuLi, PhCH(2)Na or PhCH(2)K proceeds cleanly to give the corresponding alkali metal complexes [[{(Me(3)Si)(2)CH}P(BH(3))(C(6)H(4)-2-SMe)]ML](n) [ML = Li(THF), n = 2 (10); ML = Na(tmeda), n = ∞ (11); ML = K(pmdeta), n = 2 (12)] as yellow/orange crystalline solids. X-ray crystallography reveals that the phosphido-borane ligands bind the metal centres through their sulfur and phosphorus atoms and through the hydrogen atoms of the BH(3) group in each case, leading to dimeric or polymeric structures. Compounds 10-12 are stable towards both heat and ambient light; however, on heating in toluene solution in the presence of 10, traces of free phosphine-borane 9 are slowly converted to the free phosphine {(Me(3)Si)(2)CH}PH(C(6)H(4)-2-SMe) (5) with concomitant formation of the corresponding phosphido-bis(borane) complex [{(Me(3)Si)(2)CH}P(BH(3))(2)(C(6)H(4)-2-SMe)]Li (14).     

A hybrid lithium oxalate-phosphinate salt

The novel organophosphorus-containing lithium salt Li(THF)[(C(2)O(4))B(O(2)PPh(2))(2)] (1; THF = tetrahydrofuran) was synthesized and characterized using a variety of spectroscopic techniques. An X-ray structural analysis on crystals of 1 grown from THF reveals a dimeric structure [Li(THF)(C(2)O(4))B(O(2)PPh(2))(2)](2)·THF, whereby the two units of 1 are bridged via P-O···Li interactions. Compound 1 displays high air and water stability and is also thermally robust, properties needed of electrolytes for their possible use as electrolytes and/or additives in lithium-ion battery applications.     

Ditopic hydridoborates and hydridoboranes: bridging ligands in coordination polymers and versatile hydroboration reagents

Single crystals of the meta- and para-phenylene-bridged ditopic trihydridoborates (Li(THF)(2))(2)[m-C(6)H(4)(BH(3))(2)] and (Li(THF)(2))(2)[p-C(6)H(4)(BH(3))(2)] have been prepared and investigated by X-ray crystallography. The compounds turned out to be coordination polymers in which each trihydridoborate substituent is connected with one trihydridoborate substituent of a neighbouring monomer via two bridging Li(THF)(2)(+) ions. (Li(THF)(2))(2)[m-C(6)H(4)(BH(3))(2)] and (Li(THF)(2))(2)[p-C(6)H(4)(BH(3))(2)] suffer from poor solubility in all common non-protic solvents. Thus, a more soluble derivative of (Li(THF)(2))(2)[p-C(6)H(4)(BH(3))(2)], equipped with n-hexyl groups at the positions 2 and 5 of the phenylene ring, has been used for all further investigations (i.e., compound Li(2)[6]). Treatment of Li(2)[6] with Me(3)SiCl in the presence of excess N(Me)(2)Et leads to the abstraction of one hydride ion per boron atom under formation of the ditopic amine-borane adduct p-C(6)H(2)(n-hexyl)(2)(BH(2)-N(Me)(2)Et)(2) (7). The compound turned out to be an efficient hydroboration reagent both for internal olefins (i.e., 1,5-cyclooctadiene) and terminal alkynes (i.e., tert-butyl acetylene) to give p-C(6)H(2)(n-hexyl)(2)(9-BBN)(2) (8; 9-BBN = 9-borabicyclo[3.3.1]nonyl) and p-C(6)H(2)(n-hexyl)(2)(B(C(H)=C(H)tBu)(2))(2) (9), respectively.     

Experimental and theoretical investigations of lithium and magnesium derivatives of bis(tert-butylamido)cyclodiphosph(III/V)- and (V/V)azane mono- and ditellurides

Deprotonation of bis(tert-butylamido)cyclophosph(III/III)azane with organolithium or organomagnesium reagents followed by oxidation with elemental tellurium is a viable approach to the preparation of metal cyclodiphosphazane mono- and ditellurides. The reaction of the cyclodiphosph(III)azane [tBu(H)NP(mu-NtBu)2PN(H)tBu] (1) with elemental tellurium in boiling toluene affords the monotelluride [tBu(H)N(Te)P(mu-NtBu)2PN(H)tBu] (9). A similar reaction involving the magnesium salt Mg[tBuNP(mu-NtBu)2PNtBu](THF)2 (2) also yields a monotelluride Mg[tBuN(Te)P(mu-NtBu)2PNtBu]-(THF)2 (10). By contrast, reaction of the lithium salt Li2[tBuNP(mu-NtBu)2PNtBu](THF)2 (3) with tellurium results in double oxidation and the formation of the ditellurides Li2[tBuN(Te)P(mu-NtBu)2P(Te)NtBu](THF)4 (11) and Li2-[tBuN(Te)P(mu-NtBu)2P(Te)NtBu](tmeda)2 (12). Compounds 9-12 have been characterized by multinuclear (1H, 7Li, 13C, 31P, and 125Te) NMR, while 9, 10, and 12 have also been characterized by X-ray crystallography. The structure of 9 reveals a typical cis/endo, exo arrangement, with no intermolecular contacts to tellurium. The seco-heterocubic structure, observed in 2, is retained in 10, with the ligand chelating magnesium in an N,N',N"-manner. Unique coordination behavior is exhibited by the ditelluride 12, in which the dianionic ligand is attached to the two lithium centers in both Te,Te' and Te,N bonding modes. Multinuclear NMR data are consistent with retention of the solid-state structures of 9-12 in solution at low temperatures. The reactivity of cyclodiphosph(III/III)azanes toward chalcogens is rationalized by using theoretical calculations (semiempirical PM3 level of theory), which show an inverse correlation between the charge at the phosphorus center and the ease of oxidation.     

Cubane and step-form structures of dilithium bis(aryloxy)phosphines

The lithium complexes RP(3,5-tBu2C6H2OLi)2(THF)4, where R = Ph or i Pr, (R[OPO]Li2)2(THF)4, synthesized by reaction of the 2-bromo-4,6-di-tert-butylphenol with BuLi and the appropriate dichlorophosphine, possess solid state structures composed of lithium oxide tetragons arranged in a step-form or face sharing half-cubane arrangements. Incorporation of excess lithium aryloxide results in the formation of complexes that display an extended step-form structure, [Ph[OPO]Li2(ArOLi)]2, or a distorted cubane arrangement of tetragons, [iPr[OPO]Li3Cl(ArOLi)](THF)3.     

Phase evolution in lithium disilicate glass-ceramics based on non-stoichiometric compositions of a multi-component system: structural studies by 29Si single and double resonance solid state NMR

The crystallization mechanism of a high-strength lithium disilicate glass-ceramic in the SiO(2)-Li(2)O-P(2)O(5)-Al(2)O(3)-K(2)O-(ZrO(2)) system, used as restorative dentistry material, has been examined on the basis of quantitative (29)Si magic angle spinning (MAS) and (29)Si{(7)Li} rotational echo double resonance (REDOR) NMR spectroscopy. Crystallization occurs in two stages: near 650 °C a significant fraction of the Q(3) units disproportionates into crystalline Li(2)SiO(3) and Q(4) units. Upon further annealing of this glass-ceramic to 850 °C the crystalline Li(2)SiO(3) phase reacts with the Q(4) units of the softened residual glass matrix, resulting in the crystallization of Li(2)Si(2)O(5). The NMR experiments provide detailed insight into the spatial distribution of the lithium ions suggesting the absence of lithium ion clustering in the residual glassy component of the final glass-ceramic. (31)P MAS-NMR spectra indicate that phosphate acts as a lithium ion scavenger, resulting in the predominant formation of orthophosphate (P(0)) and some pyrophosphate (P(1)) groups. Crystallization of Li(2)SiO(3) occurs concomitantly with the formation of a highly disordered Li(3)PO(4) phase as evidenced from strong linebroadening effects in the (31)P MAS-NMR spectra. Well-crystallized Li(3)PO(4) is only formed at annealing conditions resulting in the formation of crystalline lithium disilicate. These results argue against an epitaxial nucleation process previously proposed in the literature and rather suggest that the nucleation of both lithium metasilicate and lithium disilicate starts at the phase boundary between the disordered lithium phosphate phase and the glass matrix.     

The effect of coordinating and non-coordinating additives on the transport properties in ionic liquid electrolytes for lithium batteries

In the present study we expand our analysis of using two contrasting organic solvent additives (toluene and THF) in an ionic liquid (IL)/Li NTf(2) electrolyte. Multinuclear Pulsed-Field Gradient (PFG) NMR, spin-lattice (T(1)) relaxation times and conductivity measurements over a wide temperature range are discussed in terms of transport properties and structuring of the liquid. The conductivity of both additive samples is enhanced the most at low temperatures, with THF slightly more effective than toluene. Both the anion and lithium self-diffusivity are enhanced in the same order by the additives (THF > toluene) while that of the pyrrolidinium cation is marginally enhanced. (1)H spin-lattice relaxation times indicate a reasonable degree of structuring and anisotropic motion within all of the samples and both (19)F and (7)Li highlight the effectiveness of THF at influencing the lithium coordination within these systems.     

Structural diversity in solvated lithium aryloxides. Syntheses, characterization, and structures of [Li(OAr)(THF)x]n and [Li(OAr)(py)x]2 complexes where OAr = OC6H5, OC6H4(2-Me), OC6H3(2,6-(Me))2, OC6H4(2-Pr(i)), OC6H3(2,6-Pr(i)))2, OC6h4(2-Bu(t)), OC6H3(2,6-Bu(t)))2

A series of sterically varied aryl alcohols H-OAr [OAr = OC6H5 (OPh), OC6H4(2-Me) (oMP), OC6H3(2,6-(Me))2 (DMP), OC6H4(2-Pr(i)) (oPP), OC6H3(2,6-(Pr(i)))2 (DIP), OC6H4(2-Bu(t)) (oBP), OC6H3(2,6-(Bu(t)))2 (DBP); Me = CH3, Pr(i) = CHMe2, and Bu(t) = CMe3] were reacted with LiN(SiMe3)2 in a Lewis basic solvent [tetrahydrofuran (THF) or pyridine (py)] to generate the appropriate "Li(OAr)(solv)x". In the presence of THF, the OPh derivative was previously identified as the hexagonal prismatic complex [Li(OPh)(THF)]6; however, the structure isolated from the above route proved to be the tetranuclear species [Li(OPh)(THF)]4 (1). The other "Li(OAr)(THF)x" products isolated were characterized by single-crystal X-ray diffraction as [Li(OAr)(THF)]4 [OAr = oMP (2), DMP (3), oPP (4)], [Li(DIP)(THF)]3 (5), [Li(oBP)(THF)2]2, (6), and [Li(DBP)(THF)]2, (7). The tetranuclear species (1-4) consist of symmetric cubes of alternating tetrahedral Li and pyramidal O atoms, with terminal THF solvent molecules bound to each metal center. The trinuclear species 5 consists of a six-membered ring of alternating trigonal planar Li and bridging O atoms, with one THF solvent molecule bound to each metal center. Compound 6 possesses two Li atoms that adopt tetrahedral geometries involving two bridging oBP and two terminal THF ligands. The structure of 7 was identical to the previously reported [Li(DBP)(THF)]2 species, but different unit cell parameters were observed. Compound 7 varies from 6 in that only one solvent molecule is bound to each Li metal center of 7 because of the steric bulk of the DBP ligand. In contrast to the structurally diverse THF adducts, when py was used as the solvent, the appropriate "Li(OAr)(py)x" complexes were isolated as [Li(OAr)(py)2]2 (OAr = OPh (8), oMP (9), DMP (10), oPP (11), DIP (12), oBP (13)) and [Li(DBP)(py)]2 (14). Compounds 8-13 adopt a dinuclear, edge-shared tetrahedral complex. For 14, because of the steric crowding of the DBP ligand, only one py is coordinated, yielding a dinuclear fused trigonal planar arrangement. Two additional structure types were also characterized for the DIP ligand: [Li(DIP)(H-DIP)(py)]2 (12b) and [Li2(DIP)2(py)3] (12c). Multinuclear (6,7Li and 13C) solid-state MAS NMR spectroscopic studies indicate that the bulk powder possesses several Li environments for "transitional ligands" of the THF complexes; however, the py adducts possess only one Li environment, which is consistent with the solid-state structures. Solution NMR studies indicate that "transitional" compounds of the THF precursors display multiple species in solution whereas the py adducts display only one lithium environment.     

Synthesis and structural diversity of barium (N,N-dimethylamino)diboranates

The reaction of a slurry of BaBr(2) in a minimal amount of tetrahydrofuran (THF) with 2 equiv of Na(H(3)BNMe(2)BH(3)) in diethyl ether followed by crystallization from diethyl ether at -20 °C yields crystals of Ba(H(3)BNMe(2)BH(3))(2)(Et(2)O)(2) (1). Drying 1 at room temperature under vacuum gives the partially desolvated analogue Ba(H(3)BNMe(2)BH(3))(2)(Et(2)O)(x) (1') as a free-flowing white solid, where the value of x varies from <0.1 to about 0.4 depending on whether desolvation is carried out with or without heating. The reaction of 1 or 1' with Lewis bases that bind more strongly to barium than diethyl ether results in the formation of new complexes Ba(H(3)BNMe(2)BH(3))(2)(L), where L = 1,2-dimethoxyethane (2), N,N,N',N'-tetramethylethylenediamine (3), 12-crown-4 (4), 18-crown-6 (5), N,N,N',N'-tetraethylethylenediamine (6), and N,N,N',N",N"-pentamethylethylenetriamine (7). Recrystallization of 4 and 5 from THF affords the related compounds Ba(H(3)BNMe(2)BH(3))(2)(12-crown-4)(THF)·THF (4') and Ba(H(3)BNMe(2)BH(3))(2)(18-crown-6)·2THF (5'). In addition, the reaction of BaBr(2) with 2 equiv of Na(H(3)BNMe(2)BH(3)) in the presence of diglyme yields Ba(H(3)BNMe(2)BH(3))(2)(diglyme)(2) (8), and the reaction of 1 with 15-crown-5 affords the diadduct [Ba(15-crown-5)(2)][H(3)BNMe(2)BH(3)](2) (9). Finally, the reaction of BaBr(2) with Na(H(3)BNMe(2)BH(3)) in THF, followed by the addition of 12-crown-4, affords the unusual salt [Na(12-crown-4)(2)][Ba(H(3)BNMe(2)BH(3))(3)(THF)(2)] (10). All of these complexes have been characterized by IR and (1)H and (11)B NMR spectroscopy, and the structures of compounds 1-3, 4', 5', and 6-10 have been determined by single-crystal X-ray diffraction. As the steric demand of the Lewis bases increases, the structure changes from polymers to dimers to monomers and then to charge-separated species. Despite the fact that several of the barium complexes are monomeric in the solid state, none is appreciably volatile up to 200 °C at 10(-2) Torr.     

Carbene-stabilized diphosphorus: bidentate complexation of BH2(+)

Reaction of carbene-stabilized diphosphorus, L:P-P:L (L: = :C{N(2,6-Pr(i)(2)C(6)H(3))CH}(2), 1), with excess BH(3)·THF affords the boronium salt [L:P(μ-BH(2))P:L](+)[B(2)H(7)](-), 2, which contains a three-membered P(2)B ring. When 2 is dissolved in THF, compounds 1 and 2 exist in a dynamic solution equilibrium.     

The P(bth)2- anion as a Janus head staple between lithium and manganese (bth = benzothiazol-2-yl, C7H4NS)

Deprotonation of HP(bth)2 (1) affords the lithium phosphanide [(Et2O)2Li(bth)2P], (2) with both nitrogen atoms coordinated to the lithium atom while in the heterobimetallic complex [Li(bth)2P{Mn(CO)2Cp}2](n) (3) additionally the phosphorus atom micro-bridges two Mn(CO)2Cp residues.     

Alkali metal complexes of sterically demanding amino-functionalized secondary phosphanide ligands

The reaction between {(Me(3)Si)(2)CH}PCl(2) (4) and one equivalent of either [C(6)H(4)-2-NMe(2)]Li or [2-C(5)H(4)N]ZnCl, followed by in situ reduction with LiAlH(4) gives the secondary phosphanes {(Me(3)Si)(2)CH}(C(6)H(4)-2-NMe(2))PH (5) and {(Me(3)Si)(2)CH}(2-C(5)H(4)N)PH (6) in good yields as colourless oils. Metalation of 5 with Bu(n)Li in THF gives the lithium phosphanide [[{(Me(3)Si)(2)CH}(C(6)H(4)-2-NMe(2))P]Li(THF)(2)] (7), which undergoes metathesis with either NaOBu(t) or KOBu(t) to give the heavier alkali metal derivatives [[{(Me(3)Si)(2)CH}(C(6)H(4)-2-NMe(2))P]Na(tmeda)] (8) and [[{(Me(3)Si)(2)CH}(C(6)H(4)-2-NMe(2))P]K(pmdeta)] (9) after recrystallization in the presence of the corresponding amine co-ligand [tmeda = N,N,N',N'-tetramethylethylenediamine, pmdeta = N,N,N',N',N'-pentamethyldiethylenetriamine]. The pyridyl-functionalized phosphane 6 undergoes deprotonation on treatment with Bu(n)Li to give a red oil corresponding to the lithium compound [{(Me(3)Si)(2)CH}(2-C(5)H(4)N)P]Li (10) which could not be crystallized. Treatment of this oil with NaOBu(t) gives the sodium derivative [{[{(Me(3)Si)(2)CH}(2-C(5)H(4)N)P]Na}(2) x (Et(2)O)](2) (11), whilst treatment of with KOBu(t), followed by recrystallization in the presence of pmdeta gives the complex [[{(Me(3)Si)(2)CH}(2-C(5)H(4)N)P]K(pmdeta)](2) (12). Compounds 5-12 have been characterised by (1)H, (13)C{(1)H} and (31)P{(1)H} NMR spectroscopy and elemental analyses; compounds 7-9, and 12 have additionally been characterised by X-ray crystallography. Compounds 7-9 crystallize as discrete monomers, whereas 11 crystallizes as an unusual dimer of dimers and 12 crystallizes as a dimer with bridging pyridyl-phosphanide ligands.     

Syntheses,crystallographic/computational characterizations,and reactions of the first 10-vertex arachno- and nido-phosphamonocarbaboranes

A synthetic sequence involving the initial reaction of a substituted phosphorus dihalide (RPCl(2), R = CH(3), C(6)H(5)) with the arachno-CB(8)H(13)(-) (1-) monoanion followed by an in situ dehydrohalogenation reaction initiated by Proton Sponge, resulted in phosphorus cage insertion to yield the first 10-vertex arachno- and nido-phosphamonocarbaboranes, exo-6-R-arachno-6,7-PCB(8)H(12) (2a, 2b) and PSH(+)6-R-nido-6,9-PCB(8)H(9)(-) (PSH+3a-, PSH+3b-) (R = C(6)H(5) (a), CH(3) (b)). Alternatively, 2a and 2b were synthesized in high yield as the sole product of the reaction of the arachno-4-CB(8)H(12)(2-) (1(2-)) dianion with RPCl(2). Crystallographic determinations of PSH+3a- and PSH+3b- in conjunction with DFT/GIAO computational studies of the anions have confirmed the expected nido cage framework based on an octadecahedron missing the six-coordinate vertex. DFT/GIAO computational studies have also shown that while the gross cage geometries of the exo-6-R-arachno-6,7-PCB(8)H(12) compounds 2a and 2b resemble the known isoelectronic arachno-6,9-SCB(8)H(12), the phosphorus and carbon atoms are in thermodynamically unfavorable adjacent positions on the six-membered puckered face. They also each have an endo-hydrogen at the P6-position arising from proton transfer to the basic phosphorus during the cage-insertion reaction. Possible stepwise reaction pathways that can account for the formation of both the arachno and nido products are discussed. Deprotonation of 2a and 2b resulted in the formation of their corresponding conjugate monoanions, 6-R-arachno-6,7-PCB(8)H(11)(-) (2a-, 2b-), in which the proton that had been attached to the P6 atom was removed. Reactions of 2a- with O(2), S(8), BH(3).THF, or Br(2) further demonstrated the basicity of the P6-phosphorus yielding the new arachno-substituted compounds, endo-6-O-exo-6-(C(6)H(5))-arachno-6,7-PCB(8)H(11)(-) (4a-), endo-6-S-exo-6-(C(6)H(5))-arachno-6,7-PCB(8)H(11)(-) (5a-), endo-6-BH(3)-exo-6-(C(6)H(5))-arachno-6,7-PCB(8)H(11)(-) (6a-), and endo-6-Br-exo-6-(C(6)H(5))-arachno-6,7-PCB(8)H(11) (7a), respectively, in which the O, S, BH(3), and Br substituents are bound to the phosphorus at the endo position.     

Comparisons of phosphorus ligation properties in P(CH2NR)3P

Bicyclic P(CH2NMe)3P was synthesized, and its reactions with MnO2, elemental sulfur, p-toluenesulfonyl azide, BH3.THF, and W(CO)5(THF) were shown to furnish a variety of products in which the PC3 and/or the PN3 phosphorus are oxidized/coordinated. In contrast, reactions of the previously known P(CH2NPh)3P with Mo(0) and Ru(II) precursors were shown to afford products in which only the PC3 phosphorus is coordinated. The contrast in reactivity of P(CH2NR)3P (R = Me, Ph) with the aforementioned reagents is discussed in terms of steric and electronic factors. The new compounds are characterized by analytical and spectroscopic (IR, 1H, 31P, and 13C NMR) methods. The results of crystal and molecular structure X-ray analyses of the previously known compounds P(CH2O)3P and P(CH2NPh)3P and 6 of the 14 new compounds obtained in this investigation are presented. Salient features of these structures and the analysis of the Tolman cone angles calculated from their structural parameters are discussed in terms of the effects of constraint in the bicyclic moieties. Evidence is presented for greater M-P sigma bonding effects on coordination of the PC3 phosphorus of P(CH2NR)3P (R = Me, Ph) than are present in PMe3 analogues of group 6B metal carbonyls. From 1JBP data on the BH3 adducts of P(CH2NMe)3P, it is suggested that the free bases MeC(CH2NMe)3P < P(CH2NMe)3P < (Me2N)3P < P(MeNCH2CH2)3N increase in Lewis basicity at the PN3 phosphorus in the order shown. Substantial differences in 31P chemical shifts in the bicyclic compounds discussed herein relative to their acyclic analogues do not seem to be associated with the relatively small bond angle changes that occur around either the PN3 or the PC3 trivalent phosphorus atoms.     

Structural Aspects of Lithium Arenethiolate Complexes with Intramolecular Coordinating Amine Donors

Reaction of aryllithium reagents LiR (R = C(6)H(4)((R)-CH(Me)NMe(2))-2 (1a), C(6)H(3)(CH(2)NMe(2))(2)-2,6 (1b), C(6)H(4)(CH(2)N(Me)CH(2)CH(2)OMe)-2 (1c)) with 1 equiv of sulfur (1/8 S(8)) results in the quantitative formation of the corresponding lithium arenethiolates [Li{SC(6)H(4)((R)-CH(Me)NMe(2))-2}](6) (3), [Li{SC(6)H(3)(CH(2)NMe(2))(2)-2,6}](6) (4), and [Li{SC(6)H(4)(CH(2)N(Me)CH(2)CH(2)OMe)-2}](2) (5). Alternatively, 3 can be prepared by reacting the corresponding arenethiol HSC(6)H(4)((R)-CH(Me)NMe(2))-2 (2) with (n)BuLi. X-ray crystal structures of lithium arenethiolates 3 and 4, reported in abbreviated form, show them to have hexanuclear prismatic and hexanuclear planar structures, respectively, that are unprecedented in lithium thiolate chemistry. The lithium arenethiolate [Li{SC(6)H(4)(CH(2)N(Me)CH(2)CH(2)OMe)-2}](2) (5) is dimeric in the solid state and in solution, and crystals of 5 are monoclinic, space group P2(1)/c, with a = 17.7963(9) ?, b = 8.1281(7) ?, c = 17.1340(10) ?, beta = 108.288(5) degrees, Z = 4, and final R = 0.047 for 4051 reflections with F > 4sigma(F). Hexameric 4 reacts with 1 equiv of lithium iodide and 2 equiv of tetrahydrofuran to form the dinuclear adduct [Li(2)(SAr)(I)(THF)(2)] (6). Crystals of 6 are monoclinic, space group P2(1)/c, with a = 13.0346(10) ?, b = 11.523(3) ?, c = 16.127(3) ?, beta = 94.682(10) degrees, Z = 4, and final R = 0.059 for 3190 reflections with F > 4sigma(F).