电沉积法制备铁氰化铈/Nafion复合物纳米颗粒及其对多巴胺电催化氧化性能的研究

采用电沉积法沉积铁氰化铈(CeHCF)纳米颗粒,在Nafion修饰的玻碳电极表面电沉积致密的、分散性良好的铁氰化铈纳米粒子。用场发射扫描电子显微镜(FE-SEM)对铁氰化铈纳米颗粒的形貌进行了表征。利用循环伏安法(CV)研究了多巴胺在铁氰化铈/Nafion修饰玻碳电极(CeHCF/NF/GCE)表面上的电化学行为。研究表明,CeHCF/NF/GCE对多巴胺具有良好的电催化氧化作用,该传感器对多巴胺在一定浓度下呈良好的线性关系,其线性范围是1.0×10~(-7)~3.4×10~(-4)mol/L。检测限为0.2×10~(-7)mol/L(S/N=3)。     

溶胶-凝胶血红蛋白电化学传感器的研制

运用溶胶-凝胶技术将血红蛋白(Hb)固载于玻碳电极(GC)表面,制得Hb/Sol-Gel/GC修饰电极,找出了制备Hb/Sol-Gel/GC修饰电极的最佳实验条件,建立了一种测定过氧化氢的新的、灵敏的方法.同时对该电极与过氧化氢的作用机理进行了探讨.     

基于聚亚甲基蓝-碳纳米管复合膜固载血红蛋白的H2O2生物传感器

采用吸附和电化学聚合修饰方法,制得了聚亚甲基蓝-碳纳米管聚合膜玻碳电极(PMB-MWNTs/GCE),再将血红蛋白(Hb)固定在PMB-MwNTs/GCE表面,制备了稳定的Hb/PMB-MwNTs//GCE的H2O2生物传感器,并用循环伏安法对修饰电极的生物电催化行为进行了表征.研究结果表明,固定在PMB-MWNTs/...     

血红蛋白在溶胶-凝胶纳米银修饰电极上的直接电化学

运用溶胶-凝胶技术将血红蛋白(Hb)固定于纳米银(AgNPs)修饰的玻碳电极(GCE)表面,制得溶胶-凝胶血红蛋白纳米银修饰电极(Sol-Gel/Hb/AgNPs/GCE)。优化了修饰电极的制备条件,研究了该修饰电极在B-R缓冲溶液(pH=4.10)中的电化学行为,探讨了Hb在AgNPs修饰电极表面的直接电子转移机理。结果表明:AgNPs不仅保持了Hb的生物活性,而且通过它的催化效应,实现了Hb与电极之间的直接电子转移。进一步的实验结果显示,固定在纳米银修饰电极表面的Hb能保持其对H2O2的生物电催化活性。     

电还原氧化石墨烯-铁氰化钴修饰电极对肼的测定

本文提出了一种新的水合肼的测定方法。利用静电作用,在氧化石墨烯(GO)表面吸附一层均匀分散的Co2+形成GO-Co2+复合物,通过恒电位法电还原复合物中的GO,再利用循环伏安法将吸附的Co2+转化为铁氰化钴(CoHCF),制得电还原的氧化石墨烯-铁氰化钴修饰玻碳电极(ERGO-CoHCF/GCE)。采用扫描电子显微镜(SEM)对修饰电极表面进行了表征。研究了水合肼在该修饰电极上的电化学行为及在不同电极上的电流响应。结果表明:ERGO-CoHCF/GCE对肼具有很好的电催化氧化作用,其浓度与氧化峰电流呈良好的线性关系。     

电聚合构建HRP传感器检测有机过氧化物

利用电化学还原氧化石墨烯(GO)的方法将还原石墨烯(erGO)沉积在电极表面上,然后电沉积氧化锌纳米棒(ZnO)构成erGO/ZnO复合纳米材料修饰玻碳电极(GCE),最后通过电聚合中性红(NR)电子介体包埋法将辣根过氧化物酶(HRP)固定在GCE/erGO/ZnO表面制得GCE/erGO/ZnO/HRP-PNR(聚中性红)。用SEM和能谱对复合纳米材料进行了表征,通过电化学阻抗法和循环伏安法对修饰电极进行了探究,通过循环伏安法和计时电流法研究了GCE/erGO/ZnO/HRP-PNR对有机过氧化物的催化性能,结果该修饰电极对过氧化氢叔丁基(BHP)和过氧化氢异丙苯(CHP)都具有良好的检测性能。     

血红蛋白在纳米孔径氧化铝膜修饰电极上的直接电化学

运用电化学包埋法成功将血红蛋白(Hb)固定于纳米孔阳极氧化铝膜(AAO)修饰的玻碳电极(GC)表面, 制得Hb/PPy/AAO/GC修饰电极, 并对Hb/PPy/AAO/GC修饰电极的制备条件进行了优化. 研究了Hb/PPy/AAO/GC修饰电极在磷酸缓冲液(pH＝6.8)中的电化学行为, 探讨了血红蛋白在AAO修饰电极表面的直接电子转移机理. 结果表明阳极氧化铝膜不仅保持了血红蛋白的生物活性, 而且通过它的纳米尺寸效应, 实现了Hb与电极之间的直接电子转移. 其研究内容对生命科学和临床医学有着重要意义.     

基于血红蛋白/金纳米粒子/聚二烯丙基二甲基氯化铵-多壁碳纳米管生物传感器测定过氧化氢

将分散于聚二烯丙基二甲基氯化铵(PDDA)中的多壁碳纳米管(MWCNT′s)滴涂在玻碳电极(GCE)表面制成PDDA-MWCNT′s/GCE修饰电极(简称电极Ⅰ);在氯金酸溶液中用恒电位沉积法使金纳米颗粒(AuNP′s)积镀于电极Ⅰ表面,制得AuNP′s/PDDA-MWNCT′s/GCE修饰电极(简称电极Ⅱ);将血红蛋白(Hb)滴于电极Ⅱ表面,用磷酸盐缓冲溶液冲洗后制成可供测定过氧化氢用的生物传感器Hb/AuNP′s/PDDA-MWCNT′s/GCE(简称电极Ⅲ)。与裸GCE、电极Ⅰ和Ⅱ相比较,在pH 6.8的磷酸盐缓冲溶液中,过氧化氢在电极Ⅲ上的还原峰电流明显提高,其值与过氧化氢浓度在1.0～1 800μmol.L-1范围内呈线性关系,其检出限(3S/N)为0.8μmol.L-1。应用此生物传感器测定消毒液中过氧化氢的含量,测定值与高锰酸钾滴定法的测定值相符。     

DNA电化学生物传感器在转基因植物特定序列基因检测中的应用

在玻碳电极(GCE)上采用循环伏安法电聚合硫堇(PTh)得到PTh/GCE修饰电极,并利用聚硫堇层共价结合和静电作用吸附金纳米粒子(AuNP′s)制得AuNP′s/PTh/GCE修饰电极。然后通过将ss-DNA/AuNP′s/PTh修饰电极置于cDNA杂交液中,于42℃杂交制得ds-DNA/AuNP′s/PTh修饰玻碳电极,实现了脱氧核糖核酸(DNA)探针在AuNP′s/PTh修饰的玻碳电极上的固定,制得DNA电化学生物传感器。在[Fe(CN)6]3-/4-溶液中采用微分脉冲伏安法(DPV)及交流阻抗谱技术(EIS)对DNA的固定和杂交进行了表征。试验结果表明:在1.0×10-10～1.0×10-6mol.L-1的浓度范围内,该传感器可对转基因植物外源基因草丁膦乙酰转移酶基因(PAT基因)片段进行检测,检出限(3s)为3.2×10-11mol.L-1。     

电化学法制备电还原的氧化石墨烯-铁氰化镍修饰电极检测亚硝酸根

通过静电作用,在氧化石墨烯(GO)表面吸附一层均匀分散的Ni2+形成GO-Ni2+复合物,利用循环伏安法,把GO-Ni2+修饰电极上的Ni2+转化为铁氰化镍(Ni HCF),再通过电还原制备电还原的氧化石墨烯-铁氰化镍修饰的玻碳电极(ERGO-Ni HCF/GCE)。采用扫描电子显微镜(SEM)对其表面结构进行了表征。研究了NO-2在不同修饰电极上的电化学行为,ERGO-Ni HCF/GCE对NO-2的氧化反应有很好的电催化活性,NO-2的浓度与其氧化峰电流呈良好的线性关系。     

Electrocatalysis of Hemoglobin in ZnO Nanoparticle/Ionic Liquid Composite Film Modified Glassy Carbon Electrode

A nanobiocompatible composite containing hemoglobin (Hb), ZnO nanoparticles (nano‐ZnO) and ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆) was fabricated and further modified on the glassy carbon electrode (GCE). The electrochemical behaviours of Hb in the composite film were carefully studied and a pair of quasi‐reversible redox peaks appeared in pH 7.0 phosphate buffer solution, which was attributed to the electrode reaction of Hb heme Fe(III)/Fe(II) redox couple. The presences of nano‐ZnO and BMIMPF₆ in the film can retain the bioactivity of Hb and greatly enhance the direct electron transfer of Hb. The immobilized Hb showed high stability and good electrocatalytic ability to the reduction of hydrogen peroxide and O₂.     

Direct Electrochemistry and Electrocatalysis of Hemoglobin at PAMAM Dendrimer-MWNTs-Au Nanoparticles Composite Film Modified Glassy Carbon Electrode

The direct electron transfer of hemoglobin at the PAMAM-MWNTs-AuNPs composite film modified glassy carbon electrode was studied. In a phosphate buffer solution(PBS, pH=7.0), the formal potential(E 0' ) of Hb was –0.105 V versus SCE, the electron transfer rate constant was 4.66 s –1 . E 0′ of Hb at the modified electrode was linearly varied in a pH range of 5.0—8.0 with a slope of –49.2 mV/pH. The Hb/PAMAM-MWNTs-AuNPs/GCE gave an ex-cellent electrocatalytic response to the reduction of hydrogen peroxide. The catalytic current increased linearly with H 2 O 2 concentration in a range of 1.0×10 ?6 to 2.2×10 ?3 mol/L. The detection limit was 2.0×10 ?7 mol/L at a signal to noise ratio of 3. The Michaelis-Menten constant(K ma pp ) was 2.95 mmol/L.     

Trans-membrane electron transfer in red blood cells immobilized in a chitosan film on a glassy carbon electrode

We have studied the trans-membrane electron transfer in human red blood cells (RBCs) immobilized in a chitosan film on a glassy carbon electrode (GCE). Electron transfer results from the presence of hemoglobin (Hb) in the RBCs. The electron transfer rate (k _s) of Hb in RBCs is 0.42 s^?1, and <1.13 s^?1 for Hb directly immobilized in the chitosan film. Only Hb molecules in RBCs that are closest to the plasma membrane and the surface of the electrode can undergo electron transfer to the electrode. The immobilized RBCs displayed sensitive electrocatalytic response to oxygen and hydrogen peroxide. It is believed that this cellular biosensor is of potential significance in studies on the physiological status of RBCs based on observing their electron transfer on the modified electrode.

Immobilization and Bioelectrochemistry of Hemoglobin Based on Carrageenan and Room Temperature Ionic Liquid Composite Film

A novel biopolymer/room‐temperature ionic liquid composite film based on carrageenan, room temperature ionic liquid (IL) [1‐butyl‐3‐methylimidazolium tetra?uoroborate ([BMIM]BF₄)] was explored for immobilization of hemoglobin (Hb) and construction of biosensor. Direct electrochemistry and electrocatalytic behaviors of Hb entrapped in the IL‐carrageenan composite ?lm on the surface of glassy carbon electrode (GCE) were investigated. UV‐vis spectroscopy demonstrated that Hb in the IL‐carrageenan composite ?lm could retain its native secondary structure. A pair of well‐de?ned redox peaks of Hb was obtained at the Hb‐IL‐carrageenan composite ?lm modi?ed electrode through direct electron transfer between the protein and the underlying electrode. The heterogeneous electron transfer rate constant (k_s) was 2.02 s^?1, indicating great facilitation of the electron transfer between Hb and IL‐carrageenan composite film modi?ed electrode. The modi?ed electrode showed excellent electrocatalytic activity toward reduction of hydrogen peroxide with a linear range of 5.0×10^?6 to 1.5×10^?4 mol/L and the detection limit was 2.12×10^?7 mol/L (S/N=3). The apparent Michaelis‐Menten constant K_M^app for hydrogen peroxide was estimated to be 0.02 mmol/L, indicating that the biosensor possessed high af?nity to hydrogen peroxide. In addition, the proposed biosensor showed good reproducibility and stability.     

Amperometric biosensor for hydrogen peroxide based on direct electrocatalysis by hemoglobin immobilized on gold nanoparticles/1,6-diaminohexane modified glassy carbon electrode.

A facile strategy of an amperometric biosensor for hydrogen peroxide based on the direct electrocatalysis of hemoglobin (Hb) immobilized on gold nanoparticles (GNPs)/1,6-diaminohexane (DAH) modified glassy carbon electrode (GCE) has been described. A uniform monolayer film of DAH was initially covalently bound on a GCE surface by virtue of the electrooxidation of one amino group of DAH, and another amino group was modified with GNPs and Hb, successively. The fabrication process was characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM). The proposed biosensor exhibited an effective and fast catalytic response to the reduction of H2O2 with good reproducibility and stability. A linear relationship existed between the catalytic current and the H2O2 concentration in the range of 1.5x10(-6) to 2.1x10(-3) M with a correlation coefficient of 0.998 (n=24). The detection limit (S/N=3) was 8.8x10(-7) M.     

Electropolymerized Diphenylamine on Functionalized Multiwalled Carbon Nanotube Composite Film and Its Application to Develop a Multifunctional Biosensor

Diphenylamine (DPA) monomers have been electropolymerized on the amino‐functionalized multiwalled carbon nanotube (AFCNT) composite film modified glassy carbon electrode (GCE) by cyclic voltammetry (CV). The surface morphology of PDPA‐AFCNT was studied using field‐emission scanning electron microscopy (FE‐SEM). The interfacial electron transfer phenomenon at the modified electrode was studied using electrochemical impedance spectroscopy (EIS). The PDPA‐AFCNT/GCE represented a multifunctional sensor and showed good electrocatalytic behavior towards the oxidation of catechol and the reduction of hydrogen peroxide. Rotating‐disk electrode technique was applied to detect catechol with a sensitivity of 1360 µA mM^?1 cm^?2 and a detection limit of 0.01 mM. Amperometric determination of hydrogen peroxide at the PDPA‐AFCNT film modified electrode results in a linear range from 10 to 800 µM, a sensitivity of 487.1 µA mM^?1 cm^?2 and detection limit of 1 µM. These results show that the nano‐composite film modified electrode can be utilized to develop a multifunctional sensor.     

Direct Electrochemistry of Hemoglobin Immobilized on Colloidal Gold‐Hydroxyapatite Nanocomposite for Electrocatalytic Detection of Hydrogen Peroxide

A novel nanocomposite of colloidal gold (GNPs) and hydroxyapatite nanotubes (Hap) was prepared for immobilization of a redox protein, hemoglobin (Hb), on glassy carbon electrode. The immobilized Hb showed fast direct electron transfer and excellent electrocatalytic behavior toward reduction of hydrogen peroxide. A synergic effect between GNPs and Hap for accelerating the surface electron transfer of Hb was observed, which led to a pair of redox peaks with a formal potential of (?340±2) mV at pH 7.0, and a new biosensor for hydrogen peroxide with a linear range from 0.5 to 25 μM and a limit of detection of 0.2 μM at 3σ. Owing to the good biocompatibility of the nanocomposite, the biosensor exhibited good stability and acceptable reproducibility. The as‐prepared nanocomposite film provided a good matrix for protein immobilization and biosensor preparation.     

Direct electrochemistry and electrochemical catalysis of immobilized hemoglobin in an ethanol–water mixture

Hemoglobin (Hb) was immobilized on a glassy carbon electrode (GCE) surface by konjac glucomannan (KGM). KGM hydrogel films on GCE have relatively high stabilities in aqueous–ethanol mixtures. The entrapped hemoglobin undergoes fast direct electron transfer reactions in aqueous–organic solvent mixtures. The peak current is bigger, the peak-to-peak separation smaller and the formal potential observed in the cyclic voltammogram is more negative for Hb–KGM/GCE in ethanol–PBS compared to Hb–KGM/GCE in PBS. The electrochemical properties of the Hb in aqueous–organic solution are almost unchanged from with those observed for the purely aqueous solution, suggesting that water pools in the KGM hydrogel play an important role in preventing changes in conformation and making proteins unreactive with polar organic solvents. The immobilized Hb was able to catalyze the reduction of nitric oxide, peroxides (hydrogen peroxide, cumene hydroperoxide, t-butyl hydroperoxide, 2-butanone peroxide), and the dehalogenation of haloethanes (hexachloroethane, pentachloroethane, tetrachloroethane, etc.). The stability and reproducibility of the modified electrode meant that it could be used to determine these substances.      

Reagentless Biosensor for Hydrogen Peroxide Based on the Immobilization of Hemoglobin in Platinum Nanoparticles Enhanced Poly(chloromethyl thiirane) Cross‐linked Chitosan Hybrid Film

An unmediated hydrogen peroxide (H₂O₂) biosensor was prepared by co‐immobilizing hemoglobin (Hb) with platinum nanoparticles enhanced poly(chloromethyl thiirane) cross‐linked chitosan (CCCS‐PNs) hybrid film. CCCS could provide a biocompatible microenvironment for Hb and PNs could accelerate the electron transfer between Hb and the electrode. Spectroscopic analysis indicated that the immobilized Hb could maintain its native structure in the CCCS‐PNs hybrid film. Entrapped Hb exhibited direct electrochemistry for its heme Fe(III)/Fe(II) redox couples at ?0.396 V in the CCCS‐PNs hybrid film, as well as peroxidase‐like activity to the reduction of hydrogen peroxide without the aid of an electron mediator.