在光催化还原CO2中具有高催化效率的八面体Cu2O修饰的TiO2纳米管

光催化还原CO2生成烃类燃料是一种可同时解决全球变暖和能源危机问题的最有效途径之一。尽管这方面的研究已经取得了一定的进展,但是整体的光催化转换效率还非常低。因此,需要发展更加高效的催化剂。由于半导体材料禁带宽度与太阳光谱相匹配,人们已经对其进行了广泛研究。其中TiO2因具有无毒、强氧化性以及良好的光学和电学性质等而成为最主要的研究对象。但是对于光催化还原CO2反应来说, TiO2仍存在很多不足,如只能吸收太阳光谱中的紫外光,光生载流子会快速结合,以及光生空穴的强氧化能力等,这些都限制了其光催化还原CO2的效率。采用窄禁带宽度半导体修饰TiO2是解决上述不足的有效途径之一。本文采用简单的电化学方法成功制备了一种由窄禁带半导体Cu2O修饰的TiO2纳米管(TNTs)的复合物,并运用扫描电子显微镜(SEM)、X射线衍射(XRD)以及X射线光电子能谱(XPS)表征了所制备复合物的形貌、化学组成和结晶度。表征结果显示,所制备的TiO2为整齐排列的纳米管阵列结构;复合物中的纳米颗粒为Cu2O;当电化学沉积Cu2O的时间为5 min时,得到的Cu2O纳米颗粒初步呈类八面体结构。随着沉积时间的增加, Cu2O颗粒尺寸增加,具有八面体结构。 XRD和XPS结果表明, TiO2纳米管为锐钛矿,八面体Cu2O纳米颗粒的主要暴露晶面为(111)面。我们还进一步研究了不同量Cu2O纳米颗粒修饰的TiO2纳米管复合物在可见光以及模拟太阳光下光催化还原CO2的能力。在可见光下,由于自身的禁带宽度,纯净的TiO2纳米管没有任何光催化还原CO2的能力;经过Cu2O纳米颗粒的修饰,复合物显现出明显的光催化还原CO2的能力,其中经过30 min Cu2O沉积的TNTs具有最高的光催化效率。在模拟太阳光下,经过15 min Cu2O沉积的TNTs具有最高的光催化效率。在所有光催化还原CO2过程中,主要碳氢产物为甲烷。为了深入地理解该复合体系在还原CO2中的高催化效率,我们对催化剂进行了进一步的表征。紫外-可见漫反射光谱表明, Cu2O八面体纳米颗粒的沉积将TNTs的吸收光谱拓展到了可见光区域,提高了复合物对太阳光的吸收能力。此外,我们还通过测试所制样品的光电流反应、荧光发射光谱以及电化学阻抗谱,研究了催化剂中光生电子和空穴的分离和迁移能力。结果表明,适量的Cu2O沉积提高了复合物对光的吸收能力,增加了光生载流子的数量,从而使更多的光生载流子参与光催化反应。综上,本文首次报道了八面体Cu2O纳米颗粒修饰TNTs复合物的光催化还原CO2的能力。在一定量的Cu2O纳米颗粒修饰下,该复合物在光催化还原CO2生成烃类反应中表现出高效性。经过一系列详细的表征和讨论,我们认为其高效性主要源于三个方面：(1) TNTs的管状结构为反应物的吸附提供了大量的活性位点,同时一维的管状结构更有利于光生载流子的运载,从而提高了电子和空穴的分离;(2) Cu2O纳米颗粒的修饰提高了催化剂对光的吸收,促进催化剂最大程度地利用太阳光;(3) TiO2和Cu2O之间导带以及价带位置的匹配,在减少光生载流子复合的同时也降低了TiO2价带上空穴的氧化能力,从而抑制了CO2还原产物的再氧化过程。     

Fabrication of multi-sectional TiO 2 nanotube arrays by anodization

We report a facile method to grow multi-sectional TiO₂ nanotube arrays consisting of alternating bamboo-shaped and smooth-walled nanotube sections by anodization. Two key factors are necessary for obtaining these morphologies. First, in order to avoid possible disruptions between the conjoint sections of the nanotube, the distribution of hydrogen ions is suggested not to be fiercely disturbed when switching from the first to the second stage. Second, to avoid the disruption of the nanotube at the joint which results from the disparity in diameters between sections, the direct current voltage is set to be the maximum of the square wave voltage. These newly developed TiO₂ nanotube arrays are expected to have potential applications in solar cells, drug release and delivery systems.     

Formation and characterization of self-organized TiO2 nanotube arrays by pulse anodization

This paper describes TiO2 nanotube arrays prepared by anodic oxidation of Ti substrates using pulse voltage waveforms. Voltages were pulsed between 20 and -4 V or between 20 and 0 V with varying durations from 2 to 16 s at the lower limit of the pulse waveform. Ammonium fluoride or sodium fluoride (and mixtures of both) was used as the electrolyte with or without added medium modifier (glycerol, ethylene glycol, or poly (ethylene glycol) (PEG 400)) in these experiments. The pulse waveform was optimized to electrochemically grow TiO2 nanotubes and chemically etch their walls during its cathodic current flow regime. The resultant TiO2 nanotube arrays showed a higher quality of nanotube array morphology and photoresponse than samples grown via the conventional continuous anodization method. Films grown with a 20 V/-4 V pulse sequence and pulse duration of 2 s at its negative voltage limit afforded a superior photoresponse compared to other pulse durations. Specifically, the negative voltage limit of the pulse (-4 V) and its duration promote the adsorption of NH4+ species that in turn inhibits chemical attack of the growing oxide nanoarchitecture by the electrolyte F- species. The longer the period of the pulse at the negative voltage limit, the thicker the nanotube walls and the shorter the nanotube length. At variance, with 0 V as the low voltage limit, the longer the pulse duration, the thinner the oxide nanotube wall, suggesting that chemical attack by fluoride ions is not counterbalanced by NH3/NH4+ species adsorption, unlike the interfacial situation prevailing at -4 V. Finally, the results from this study provide useful evidence in support of existing mechanistic models for anodic growth and self-assembly of oxide nanotube arrays on the parent metal surface.     

Fabrication of S-scheme hollow TiO2@Bi2MoO6 composite for efficiently photocatalytic CO2 reduction

Herein, an S-scheme hollow TiO₂@Bi₂MoO₆ heterojunction was synthesized for photocatalytic reduction of CO₂ under simulated sunlight. Among all prepared composites, the TiO₂@Bi₂MoO₆ with 20% of TiO₂ exhibited the highest CO yield (183.97 μmol/g within 6 h), which was 4.0 and 2.4 times higher than pristine TiO₂ and Bi₂MoO₆, respectively. The improved photocatalytic activity may be due to the formation of S-scheme heterojunction to promote the separation and transfer of photogenerated charge carriers. Additionally, this hollow structure provided abundant sites in terms of CO₂ adsorption and activation. Meanwhile, the photogenerated charge transfer mechanism of the S-scheme was verified by work function calculations, Electron paramagnetic resonance (EPR) measurements as well as X-ray photoelectron spectroscopy (XPS). This research presents a novel approach to improve photocatalytic reduction of CO₂ via morphology modulation and the fabrication of S-scheme heterojunction.     

Polypyrrole self-organized nanopore arrays formed by controlled electropolymerization in TiO2 nanotube template

A new concept for formation of nanostructured intrinsically conducting polymers (ICP) is demonstrated. Polypyrrole can be electropolymerized from an ionic-surfactant-solution in TiO(2) nanotube framework to form a geometrical structure of self-organized nanopore arrays. Polymerization is initialized selectively in the space between nanotube walls forming a mechanically stable polymer network with controlled wall thickness from 40 to 10 nm. Such robust polymer nanostructures are very promising for application in electrochemical systems of limited charge carrier diffusion length.     

Fabrication of highly ordered TiO2 nanotube arrays using an organic electrolyte

Anodization of titanium in a fluorinated dimethyl sulfoxide (DMSO) and ethanol mixture electrolyte is investigated. The prepared anodic film has a highly ordered nanotube-array surface architecture. Using a 20 V anodization potential (vs Pt) nanotube arrays having an inner diameter of 60 nm and 40 nm wall thickness are formed. The overall length of the nanotube arrays is controlled by the duration of the anodization, with nanotubes appearing only after approximately 48 h; a 72 h anodization results in a nanotube array approximately 2.3 mum in length. The photoelectrochemical response of the nanotube-array photoelectrodes is studied using a 1 M KOH solution under both UV and visible (AM 1.5) illumination. Enhanced photocurrent density is observed for samples obtained in the organic electrolyte, with an UV photoconversion efficiency of 10.7%.     

氮自掺杂暴露（001）晶面TiO2微米片的可见光光催化CO2还原性能增强

化石能源的使用可产生大量CO2,带来严重的温室效应。光催化CO2还原生产太阳燃料技术既有望缓解温室效应,又可以将低能量密度的太阳能转化为高能量密度的化学能储存起来方便使用。高效光催化材料的开发是发展光催化技术的关键。迄今,在已开发的所有半导体光催化材料中, TiO2仍是广泛研究的明星材料。在实际使用中, TiO2的光催化效率仍受限于其极弱的可见光利用率和较高的电子-空穴复合几率。近年来,越来越多的研究表明TiO2的结构与形貌特征极大地影响其光催化效率。尤其, TiO2的外露晶面设计与晶面效应研究引起了广泛关注。由于具有较高表面能和较多表面不饱和键,起初大多数理论和实验研究认为锐钛矿TiO2(001)晶面是光催化活性晶面。后来,越来越多研究表明并非锐钛矿TiO2(001)晶面的暴露比例越高其光催化活性就越高。最近,我们发现锐钛矿TiO2(001)晶面与(101)晶面在调控光催化CO2还原性能上具有良好的协同效应。密度泛函理论计算表明,锐钛矿TiO2的(001)晶面与(101)晶面的能带结构有差异,(001)晶面的导带位置相对于(101)晶面而言较高,而(101)晶面的价带位置相对于(001)晶面而言较低。基于此我们提出,具有合适比例的锐钛矿TiO2的(001)晶面与(101)晶面的交界处可以形成最佳的表面异质结或晶面异质结。表面异质结的形成导致光生电子倾向于向(101)扩散,光生空穴倾向于向(001)扩散,从而促进光生电子-空穴分离,降低光生电子-空穴复合几率。在此工作基础上,我们直接以氮化钛为原料,氢氟酸为添加剂,通过简单的水热反应一步合成了氮自掺杂的TiO2微米片。利用X射线粉末衍射、扫描电镜、X射线光电子能谱、紫外-可见漫反射光谱、氮气吸附-脱附以及电化学阻抗谱等方法手段对所制备的光催化剂进行了基本结构与理化性质表征分析,并研究了其可见光光催化CO2还原性能。电镜照片结果表明,我们所制备的氮自掺杂锐钛矿TiO2微米片的(001)晶面与(101)晶面比例分别为65%和35%。基于我们前期研究结果, TiO2微米片的(001)晶面与(101)晶面可以形成表面异质结,具有良好的电荷分离效率,这也得到了电化学阻抗谱研究结果的证明。同时,由于N的原位掺杂,所制备的TiO2微米片具有优异的可见光捕获能力。由于可见光利用效率增强与光生电子-空穴分离效率提高这两方面的综合作用,所制备的氮自掺杂TiO2微米片具有非常好的可见光光催化CO2还原制甲醇性能,比商用P25及氮掺杂TiO2纳米粒子等参考样品的可见光光催化性能更优异。研究表明,通过原位自掺杂方法与晶面设计方法相结合,可以同时改善TiO2的可见光利用效率和光生电子-空穴分离效率,优化TiO2的可见光光催化性能,这也为后续开发新型高效光催化材料提供了新思路。     

Solar-responsive sole TiO2 nanotube arrays with high photocatalytic activity prepared by one-step anodic oxidation

Journal of Solid State Electrochemistry - We prepared sole TiO2 nanotube arrays (NAs) using one-step and two-step anodic oxidation followed by annealing. These TiO2 NAs were characterized by X-ray...     

Fabrication and supercapacitive performance of long anodic TiO2 nanotube arrays using constant current anodization

A galvanostatic anodization is used to prepare long TiO₂ nanotube arrays (TNTAs). TNTAs of over 100 μm in length, with similar nanotube size and structural regularity to the classic TNTAs made from potentiostatic mode, are achieved at 10 mA cm^− 2. After a post-anodization in a H₃PO₄-based electrolyte, the TNTAs with long nanotubes exhibit good adhesion to Ti substrate. The as-prepared long TNTAs yield a larger areal capacitance of 128.4 mF cm^− 2. Further, the long TNTAs possess a higher surface area, making them suitable as support templates for other active materials.     

Carbon nitride polymer sensitized TiO2 nanotube arrays with enhanced visible light photoelectrochemical and photocatalytic performance

Novel carbon nitride polymer sensitized TiO(2) nanotube arrays with high photocatalytic activity and photoelectrochemical response under visible light irradiation are prepared by electrodeposition.     

Fabrication of multi-sectional TiO_2 nanotube arrays by anodization

We report a facile method to grow multi-sectional TiO2 nanotube arrays consisting of alternating bamboo-shaped and smooth-walled nanotube sections by anodization.Two key factors are necessary for obtaining these morphologies.First,in order to avoid possible disruptions between the conjoint sections of the nanotube,the distribution of hydrogen ions is suggested not to be fiercely disturbed when switching from the first to the second stage.Second,to avoid the disruption of the nanotube at the joint which resu...     

Fabrication and photocatalytic activity of high-efficiency visible-light-responsive photocatalyst ZnTe/TiO2 nanotube arrays

A new ZnTe modified TiO₂ nanotube (NT) array catalyst was prepared by pulse potential electrodeposition of ZnTe nanoparticles (NPs) onto TiO₂ NT arrays, and its application for photocatalytic degradation of anthracene-9-carboxylic acid (9-AnCOOH) was investigated. The even distribution of ZnTe NPs was well-proportionately grown on the top surface of the TiO₂ NT while without clogging the tube entrances. Compared with the unmodified TiO₂ NT, the ZnTe modified TiO₂ NT (ZnTe/TiO₂ NT) showed significantly enhanced photocatalytic activity towards 9-AnCOOH under simulated solar light. After 70 min of irradiation, 9-AnCOOH was degraded with the removal ratio of 45% on the bare TiO₂ NT, much lower than 80%, 90%, and 100% on the ZnTe/TiO₂ NT with the ZnTe NPs prepared under the pulsed “on” potentials of −0.8, −1.0, and −2.0 V, respectively. The increased photodegradation efficiency mainly results from the improved photocurrent density as results of enhanced visible-light absorption and decreased hole-electron recombination due to the presence of narrow-band-gap p-type semiconductor ZnTe.     

A facile strategy to synthesize Pd/TiO2 nanotube arrays with high visible light photocatalytic performance

Research on Chemical Intermediates - Novel Pd/TiO2 nanotube arrays (Pd/TNTAs) were fabricated by introducing Pd nanoparticles onto TNTAs via a facile deposition–reduction method. Pd...     

Highly-ordered dye-sensitized TiO2 nanotube arrays film used for improving photoelectrochemical electrodes

Thin titanium oxide nanotube arrays (TNAs) films were synthesized by anodization of titanium foil in an aqueous dimethyl sulfoxide solution using a platinum foil counter electrode.TNAs up to 6.8 μm in length,120 nm in inner pore diameter,and 20 nm in wall thickness were obtained by 40 V potentials anodization for 24 h.Their microstructures and surface morphologies were characterized by XRD,TEM,SAED and UV-vis spectroscopy.The photoelectrochemical properties of as-prepared unsensitized and dye-sensitized TNAs electrodes were examined under simulated solar light (AM 1.5,100 mW/cm2) illumination.The results showed that the photocurrent of the dye-sensitized TNAs electrodes reached 6.9 mA/cm2,which was 6 times more than that of the dye-sensitized TiO2 nanoparticles (TNPs) electrodes.It implied that the electron transport process and the charge recombination suppression within TNAs electrodes were much more favorable in comparison with that in the TNPs electrodes.Electrodes applying such kind of titania nanotubes will have a potential to further enhance the efficiencies of TNAs-based dye-sensitized solar cells.     

TiO2 nanotube arrays fabricated by anodization in different electrolytes for biosensing

Titania nanotube arrays were fabricated by anodic oxidation of titanium foil in different electrolytes. The morphology, crystallinity and composition of the as-prepared nanotube arrays were studied by XRD, SEM and EDX. Electrochemical impedance spectroscopy (EIS) was employed to investigate their electrical conductivity and capacitance. Titania nanotube arrays co-adsorbed with horseradish peroxidase (HRP) and thionine chloride (Th) were studied for their sensitivity to hydrogen peroxide by means of cyclic voltammetric and galvanostatic measurements. The experiments showed that TiO₂ nanotube arrays possessed appreciably different sensitivities to H₂O₂ due to their different conductivity. Further experiments revealed that TiO₂ nanotubes have noticeably different ability of adsorbing HRP and Th, and the best sensitivity was achieved when the density of HRP is the highest. The TiO₂ nanotube arrays fabricated in potassium fluoride solution demonstrated the best sensitivity on hydrogen peroxide in the range of 10⁻⁵–3 × 10⁻³ M at pH 6.7 and at a potential of −600 mV (vs. Ag/AgCl).     

The photocatalytic and thermal catalytic reduction of CO2 with H2 over Pt/TiO2 catalysts

浸渍法制备了Pt负载量为0.5 to 2%的Pt/TiO2催化剂,考察它们在光照和加热条件下二氧化碳催化加氢性能.结果表明,二氧化碳加氢反应均可在Pt/TiO2的催化下进行,但在不同反应条件下加氢反应通过不同方式进行.在加热条件下,二氧化碳可转化为一氧化碳和甲烷,且在低温加热条件下一氧化碳是主产物(CO选择性为100%,250℃,0.5%Pt/TiO2).在1.5%Pt/TiO2催化剂上,当反应温度从250℃升高到450℃时,CH4的选择性由0增加到60.94%.同时,增加Pt的负载量也会导致CH4的选择性的增加.然而,在光照条件下,产物只有甲烷.CO2-TPD结果表明,二氧化碳通过羰基基团与作为吸附中心的Pt相连接.结合催化活性与表征结果,提出在光照条件下,反应可能以二氧化碳和氢气分别被光生电子活化反应生成甲酸中间体,随后经由甲酸加氢和脱水生成甲烷的机理进行.而在加热条件下,反应可能以二氧化碳首先吸附在催化剂表面形成羰基Pt物种,随后加氢生成一氧化碳,一氧化碳继续加氢生成甲烷的机理进行.     

Defective TiO2 for photocatalytic CO2 conversion to fuels and chemicals

Photocatalytic conversion of CO₂ into fuels and valuable chemicals using solar energy is a promising technology to combat climate change and meet the growing energy demand. Extensive effort is going on for the development of a photocatalyst with desirable optical, surface and electronic properties. This review article discusses recent development in the field of photocatalytic CO₂ conversion using defective TiO₂. It specifically focuses on the different synthesis methodologies adapted to generate the defects and their impact on the chemical, optical and surface properties of TiO₂ and, thus, photocatalytic CO₂ conversion. It also encompasses theoretical investigations performed to understand the role of defects in adsorption and activation of CO₂ and identify the mechanistic pathway which governs the formation and selectivity of different products. It is divided into three parts: (i) general mechanism and thermodynamic criteria for defective TiO₂ catalyzed CO₂ conversion, (ii) theoretical investigation on the role of defects in the CO₂ adsorption–activation and mechanism responsible for the formation and selectivity of different products, and (iii) the effect of variation of physicochemical properties of defective TiO₂ synthesized using different methods on the photocatalytic conversion of CO₂. The review also discusses the limitations and the challenges of defective TiO₂ photocatalysts that need to be overcome for the production of sustainable fuel utilizing solar energy.

This review discusses photocatalytic CO₂ conversion using defective TiO₂, with emphasis on the mechanism, the role of defects on CO₂ adsorption–activation and product selectivity, as well as challenges of defective TiO₂ to produce solar fuels.     

Adsorption and photoelectrocatalytic characteristics of organics on TiO2 nanotube arrays

The adsorption and photoelectrocatalytic characteristics of four different kinds of organic compounds (d-fructose, glutamic acid, fumaric acid, and nicotinic acid) on TiO₂ nanotube arrays (TNAs) were investigated using a thin-layer cell, wherein the compounds were rapidly and exhaustively oxidized. The photogenerated current–time (I _ph–t) profiles were found to be related to the adsorption, the degradation rate, and the reaction mechanism. The relationship between the initial organic compounds concentrations and photocurrent peaks (I _0ph) fit the Langmuir type adsorption model well, thereby confirming that the adsorption of organic compounds on TNAs was via monolayer adsorption. The adsorption equilibrium constant was obtained from the Langmuir equation. The results indicate that the adsorption performance of the organic compounds on TNAs were in the following order: nicotinic acid < d-fructose < glutamic acid < fumaric acid. The degradation of organic compounds on TNAs was classified as either easy or difficult based on the time of complete mineralization (t _end) of the organic samples under an equal holes consumption; the degree of degradation were as follows: fumaric acid < d-fructose < glutamic acid < nicotinic acid. The photoelectrocatalytic characteristics of the organic compounds on TNAs were also discussed by analyzing the changes in the I _ph –t profiles.     

Bubble-like CdSe nanoclusters sensitized TiO2 nanotube arrays for improvement in solar cell

Solar cells were fabricated using novel bubble-like CdSe nanoclusters sensitized highly ordered titanium oxide nanotube (TiO₂ NT) array, prepared by anodization technique. The CdSe sensitization of TiO₂ NT arrays was carried out by a chemical bath deposition method with freshly prepared sodium selenosufite, ammonium hydroxide and cadmium acetate dehydrate at different deposition times: 20, 40 and 60 min. The adsorption of CdSe nanoclusters on the upper and inner surface of the TiO₂ NT arrays has been confirmed by field emission scanning electron and transmission electron microscopes. The results show the variation in cell a performance with different deposition times (20, 40, and 60 min) of CdSe on TiO₂ NT arrays. The solar cell with CdSe, deposited for 60 min, shows reasonably high photovoltaic property compared to the reported results of similar studies. This solar cell shows the maximum photoelectric conversion efficiency of 1.56% (photocurrent of 7.19 mA/cm²; photovoltage of 0.438 V; and fill factor of 49.5%) and average incident photon to current efficiency of 50.2%. The photocurrent, incident photon-current efficiency and electron lifetime have been improved due to the increase of covered area and size of bubble-like CdSe nanoclusters on TiO₂ NT arrays with the increase of deposition time.     

Ultrahigh sensitivity assays for human cardiac troponin I using TiO2 nanotube arrays

Rapid, highly sensitive troponin assays for the analysis of serum at the point-of-care are particularly desirable for the effective treatment of myocardial infarction (MYI). TiO(2) nanotube arrays constitute a low cost, high surface area, semiconducting architecture with great promise for biosensing applications due to their compatibility with multiple detection techniques. Using TiO(2) nanotube arrays functionalized with highly robust and ordered carboxyalkylphosphonic acid self-assembled monolayers, we have developed a simple and highly sensitive fluorescence immunoassay which can detect concentrations of human cardiac troponin I as low as 0.1 pg ml(-1) without the use of enzymatic amplification. Varying the morphological parameters of the nanotube arrays allows tuning the detection range over 6 orders of magnitude of the troponin concentration from 0.1 pg ml(-1)-100 ng ml(-1).