对称正交铺设矩形叠层板的非线性弯曲

本文应用[1]中提出的奇异摄动方法,在[3]的基础上,研究了在各种支承条件下承受均布载荷的对称正交铺设矩形叠层板的非线性弯曲问题,导出了挠度和应力函数的一致有效的N阶形式渐近解.对承受均布压力,边界位移为零的简支矩形板进行了分析、计算.     

轴对称圆板(含叠层板)的三维非线性分析

本文提出了轴对称固支圆板(含叠层板)受均布横向载荷作用下的三维非线性摄动解答.文中所考虑的是一种中等大挠度的几何非线性,并采用一种发展的摄动方法对复杂的三维非线性平衡微分方程进行求解.该方法的基本思想是以二维解答为基础,对板的厚度参数进行摄动而求得相应的三维解答.文中给出了一般板及叠层板的三维非线性理论结果及数值结果,并图示出了各个应力的分布情况.而且,该三维非线性结果能退化为完全一致的相应的二维板理论非线性结果.结果表明,该方法对板的三维非线性分析是一种行之有效的方法.     

不对称的各向异性叠层矩形板的非线性弯曲(Ⅰ)

本文研究了不对称的各向异性叠层矩形板在多种支承条件下的非线性弯曲,利用文[1]中提出的奇异摄动方法,导出了板在横向载荷和边缘拉力的联合作用下,其挠度和应力函数的一致有效的N阶渐近解。因此,本文的研究对于这样一个复杂的问题提供了一个简单而又有效的方法。     

简支夹层矩形板的非线性弯曲

本文应用变分法导出了具有软夹心的夹层矩形板的非线性弯曲理论的基本方程和边界条件.然后,使用摄动法研究了均布横向载荷作作用下简支夹层矩形板的非线性弯曲问题,得到了相当精确的解析解.     

矩形板屈曲和后屈曲弹塑性分析

本文以摄动法给出了矩形板屈曲和后屈曲全过程的弹塑性分析. 本文同时讨论了初始几何缺陷对矩形板后屈曲性态的影响.计算结果表明,矩形板非弹性屈曲对初始缺陷是敏感的.计算结果与实验结果的比较表明二者相当一致.     

单向压缩简支矩形板后屈曲摄动分析

本文从Kármán板大挠度方程出发,以挠度为摄动参数,采用直接摄动法,研究了简支矩形板在单向压缩作用下的后屈曲性态.本文讨论了两种面内边界条件,同时考虑了初始挠度的影响.计算结果与实验结果的比较表明二者是一致的.本文所用的方法,没有见到有人发表过.作者认为,对于矩形板后屈曲分析,本文是比较简明的.     

横向剪切对双模量复合材料叠层矩形板非线性弯曲的影响

本文探讨了动力松弛(DR)法在双模量复合材料叠层矩形板非线性弯曲问题中的应用。在分析中分别采用叠层板大挠度经典理论和计及大转动(在Von Karman意义上)的复合材料叠层板剪切变形理论。我们发现,对于考虑横向剪切变形的非线性弯曲问题,如何计算虚拟密度以控制数值计算的稳定性,仍然需要进一步研究。本文提出了一种虚拟密度的计算方法,从而保证了本课题数值计算的稳定性。文中介绍了用DR法求解双模量复合材料叠层板非线性弯曲的主要步骤,给出了由轻度双模量材料(Born-Epxy(B-E))和高度双模量材料(Aramid-Rubber(A-R)和Polyester-Rubber(P-R))的两层正交叠层简支矩形板在正弦分布载荷及均布载荷作用下的非线性弯曲特性的数值结果。将所得结果和小挠度分析结果及普通复合材料的结果作了比较,并分析了横向剪切变形对无量纲中心挠度的影响。     

中厚板的弹性屈曲和后屈曲

本文采用Reissner假定考虑横向剪切变形的影响,导出弹性矩形板大挠度方程.本文讨论考虑横向剪切变形的矩形板的弹性屈曲和后屈曲.采用文[8]提供的摄动方法,给出了完善和非完善中厚板的后屈曲平衡路径,并与经典薄板理论结果进行了比较.     

确定薄板在二重特征值处屈曲状态的一种方法*

本文结合有限元法和摄动法给出了一个确定薄板在二重特征值处分支方向的方法.用此方法,我们对双向受压矩形板在二重特征值处的屈曲状态进行了数值计算,结果表明此方法是可行的.     

用摄动法和有限条法分析矩形板的大挠度

本文将摄动法和有限条法结合起来进行矩形板的大挠度弯曲分析.用摄动的概念,将非线性微分方程组化为一系列线性微分方程组,然后用有限条法解这些线性微分方程组.     

弹性矩形薄板受迫振动的功的互等定理法(Ⅰ)——四边固定的矩形板和三边固定的矩形板

本文将功的互等定理法(MRT)推广于求解在简谐干扰力作用下矩形板的稳态响应.给出了各种边界条件矩形板的一系列封闭解并提供了一些有实用价值的图表.功的互等定理法(MRT)是求解在各种简谐干扰力作用下的矩形板稳态响应的一个简便、通用的方法.本文包括三部分:(Ⅰ)四边固定的矩形板和三边固定的矩形板;(Ⅱ)二邻边固定的矩形板;(Ⅲ)悬臂矩形板.我们准备分三次陆续发表它们.     

Modified mixed Ritz-DQ formulation for free vibration of thick rectangular and skew plates with general boundary conditions

Recently, the present authors proposed a simple mixed Ritz-differential quadrature (DQ) methodology for free and forced vibration, and buckling analysis of rectangular plates. In this technique, the Ritz method is first used to discretize the spatial partial derivatives with respect to a coordinate direction of the plate. The DQ method is then employed to analogize the resulting system of ordinary or partial differential equations. The mixed method was shown to work well for vibration and buckling problems of rectangular plates with simple boundary conditions. But, due to the use of conventional Ritz method in one coordinate direction of the plate, the geometric boundary conditions of the problem can only be satisfied in that direction. Therefore, the conventional mixed Ritz-DQ methodology may encounter difficulties when dealing with rectangular plates involving adjacent free edges and skew plates. To overcome this difficulty, this paper presents a modified mixed Ritz-DQ formulation in which all the natural boundary conditions are exactly implemented. The versatility, accuracy and efficiency of the proposed method for free vibration analysis of thick rectangular and skew plates are tested against other solution procedures. It is revealed that the proposed method can produce highly accurate solutions for the natural frequencies of thick rectangular plates involving adjacent free edges and skew plates using a small number Ritz terms and DQ sampling points.     

弹性厚矩形板受迫振动的功的互等定理法

本文将功的互等定理法（ＲＴＭ）推广应用于求解基于Ｒｅｉｓｓｎｅｒ理论的厚矩形板受迫振动问题·本文导出了厚矩形板动力基本解；给出了三边固定一边自由厚矩形板在均布简谐干挠力作用下稳态响应的精确解析解·这是计算厚矩形板受振动稳态响应的一个简便通用的方法·     

On the natural frequency of transversely isotropic magneto-electro-elastic plates in contact with fluid

In this paper, the vibration characteristics of transversely isotropic magneto-electro-elastic (MEE) rectangular plates in contact with fluid are investigated. The mathematical formulation on the determination of added virtual mass for water-contacting MEE rectangular plates with uniform thickness is performed. Based on the recently proposed differential equation governing the dynamical responses of the MEE rectangular plates, a fluid-structure interaction model is established and analyzed. First of all, the added virtual mass incremental (AVMI) factor of the system is calculated by using the proposed approach and the added virtual mass can then be obtained, furthermore, the natural frequencies of the MEE rectangular plates in contact with fluid with different boundary conditions are also investigated. It is noted that the natural frequencies based on the proposed method are very useful for those engineers or researchers who are engaged in the vibration analysis and design of the MEE plate in contact with fluid.     

用双向三角级数法解悬臂矩形薄板在均布荷载下的弯曲

悬臂矩形板的弯曲问题是平板理论中的一个难题.多年来,对于这种板只有能量法与数值解法的近似解.1979年以来清华大学张福范教授等用迭加法陆续得出悬臂矩形板在均布荷载和一些集中荷载作用下的解析解.对于在均布荷载作用下的悬臂矩形薄板,本文用双向三角级数法获得了其挠度函数的解析解,并将所得结果与迭加法所得的结果进行了比较.通过比较表明,两种方法计算的结果符合得十分好,因而相互印证了它们的正确性.     

任意载荷作用下矩形弹性薄板横向弯曲的一个高精度近似解*

李兹法是近似求解弹性薄板横向弯曲的一种广泛使用的有效方法,其精度完全取决于基函数的选择.本文根据矩形薄板横向弯曲的特点,将基函数选择为正弦三角级数与多项式函数的叠加,不但公式简单易程序化,而且有着很高的精度.本文最后给出了两个算例,并与经典结果进行了比较.     

Secondary Buckling Analysis of Thin Rectangular Plates Based on the Wavelet Galerkin Method北大核心CSCD

Application of the wavelet Galerkin method (WGM) to numerical solution of nonlinear buckling problems was studied with classical elastic thin rectangular plates. First, the discretized scheme of the von Kármán equation were introduced, then a simple calculation approach to the Jacobian and Hessian matrices based on the WGM was proposed, and the wavelet discretized scheme-based eigenvalue equation method, the extended equation method and the pseudo arc-length method for nonlinear buckling analysis were discussed. Second, the secondary post-buckling equilibrium paths of elastic thin rectangular plates and the effects of aspect ratios, boundary conditions and bi-directional compression on the mode jumping behaviors, were discussed in detail. Numerical results show that, the WGM possesses good convergence for solving buckling loads on rectangular plates, and the obtained equilibrium paths are in good agreement with those from the stability experiments, the 2-step perturbation method and the nonlinear finite element method. Given the feasibility of combination with different bifurcation computation methods, the WGM makes an efficient spatial discretization method for complex nonlinear stability problems of typical plates and shells. © 2023 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

应用功的互等定理计算矩形弹性薄板的自然频率

在文[1]的基础上,本文进一步推广功的互等定理的应用于计算矩形弹性薄板的自然频率.应用本法无需求解控制微分方程,只需在基本系统与实际系统之间应用功的互等定理后求解一简单的积分方程即可.使用了广义简支边的概念并且引入了频率矩阵,从而一并得到了两对边简支、另两对边为各种支持的矩形板的所有频率方程.这是计算矩形板自然频率的一个简便通用的方法.