A new study on effect of various chemical treatments on Agave Americana fiber for composite reinforcement: Physico-chemical,thermal, mechanical and morphological properties

This research is focused to fundamentally understand the benefits of using Agave Americana C. plant as potential reinforcement in polymeric composites. The fibers were extracted from the external part of the bark of the plant, which grows worldwide in pastures, grasslands, open woodlands, coastal and riparian zones. In order to use the natural fiber as reinforcement it is paramount important to probe their chemical composition, microstructural behavior and mechanical properties. Hence, firstly the extracted fibers were chemically treated with NaOH, stearic acid, benzoyl peroxide and potassium permanganate. The chemical composition in terms of cellulose, hemicellulose, lignin and other waxy substances were determined using a standard TAPPI method. FT-IR technique was used to understand the character of molecular bonds, crystallinity and their correlations with various bonds in fiber structure. The thermal stability was investigated through thermogravimetric and differential scanning calorimetric analysis, and the mechanical characterization was performed by applying standard tensile test. The surface morphology of fibers was examined through scanning electron microscopy (SEM) and finally reliability scrutiny of all the analysis was carried out. The results of chemical modification techniques applied on the surfaces of natural fibers allows to produce superior fibers used to form the novel composite materials for light-weight application.     

Structure and properties of novel fibers spun from cellulose in NaOH/thiourea aqueous solution

Cellulose was dissolved rapidly in a NaOH/thiourea aqueous solution (9.5:4.5 in wt.-%) to prepare a transparent cellulose solution, which was employed, for the first time, to spin a new class of regenerated cellulose fibers by wet spinning. The structure and mechanical properties of the resulting cellulose fibers were characterized, and compared with those of commercially available viscose rayon, cuprammonium rayon and Lyocell fibers. The results from wide angle X-ray diffraction and CP/MAS 13C NMR indicated that the novel cellulose fibers have a structure typical for a family II cellulose and possessed relatively high degrees of crystallinity. Scanning electron microscopy (SEM) and optical microscopy images revealed that the cross-section of the fibers is circular, similar to natural silk. The new fibers have higher molecular weights and better mechanical properties than those of viscose rayon. This low-cost technology is simple, different from the polluting viscose process. The dissolution and regeneration of the cellulose in the NaOH/thiourea aqueous solutions were a physical process and a sol-gel transition rather than a chemical reaction, leading to the smoothness and luster of the fibers. This work provides a potential application in the field of functional fiber manufacturing.     

Extraction and characterization of new natural lignocellulosic fiber Cyperus pangorei

This research is focused on the study of the physical, chemical, mechanical, and thermal properties of a newly identified natural stem fiber, Cyperus pangorei. The chemical composition of Cyperus pangorei fibers (CPF) such as cellulose, lignin, ash, moisture, and wax contents was evaluated. Besides these, the fiber density was determined and the apparent diameter was measured using an optical microscope. Further, tensile, thermal, XRD, and FT-IR studies were performed to evaluate the suitability of the fiber as a reinforcement. The surface topography of CPF was analyzed using scanning electron microscopy (SEM). Encouraging properties such as increased stiffness, fiber texture, and higher thermal stability suggest the suitability of CPF as reinforcement in polymer matrices.     

Extraction and Characterization of Novel Lignocellulosic Fibers From Thespesia Lampas Plant

In this work, the lignocellulosic fibers from the plant Thespesia lampas were extracted and investigated in detail. The prime objective of this work was to study the effect of alkali treatment on the chemical composition, tensile properties, morphological and structural changes, and thermal degradation of Thespesia lampas fibers. Chemical analysis, FT-IR, and ¹³C CP-MAS NMR spectroscopic studies indicated lowering of amorphous hemicellulose content on alkali treatment. Wide-angle X-ray diffraction studies indicated increase in crystallinity of the fibers on alkali treatment. The tensile strength and modulus of the fibers and thermal stability increased on alkali treatment. Scanning electron micrographs revealed roughening of the surface of the fibers due to the removal of the hemicellulose layer on alkali treatment. Tensile properties of Thespesia fibers were compared to those of other important natural fibers, and it was indicated as an alternative suitable source for composite construction.     

Preparation and characterization of biodegradable sugarcane bagasse nano reinforcement for polymer composites using ball milling operation

The present work includes the processing and characterization of nano-based natural reinforcement for polymer composite materials. Sugarcane bagasse has been collected and the fibers were extracted using manual striping process. Undesirable materials present in the extracted fibers were removed by 1% NaOH-based chemical treatment. The macrofibers were reduced to nano scale by using high-energy ball milling process. Nanoparticles from bagasse fibers were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The degree of crystallinity of nano bagasse is 55.2% and it was reported by using XRD. A FTIR spectrum confirms the presence of cellulose functional groups in nano bagasse. The nano bagasse dimensions and morphology were investigated using SEM. The average length and diameter of the nano bagasse is 51.2 and 46.1 nm, respectively. Thermal stability of the nano bagasse was revealed by TGA analysis. The chemical composition of cellulose, lignin, and hemicellulose contents was also investigated.     

Physico-chemical,Tensile, and Thermal Characterization of Napier Grass (Native African) Fiber Strands

This article presents the extraction and effect of alkali treatment on the physical, chemical, tensile, and thermal characteristics of fiber strands obtained from Napier grass, a renewable biomass. In order to improve these properties, the Napier grass fiber strands were treated with sodium hydroxide. The alkali treatment was carried out using NaOH solution at three different concentrations (5, 10, and 15%) for 2 h. Characterization of untreated and alkali-treated Napier grass fiber strands was carried out by studying the chemical composition, surface morphology, functional group variation, crystallinity, and tensile and thermal behavior. It was found that untreated fiber strands have lower cellulose content, crystallinity, tensile properties, and thermal stability than alkali-treated fiber strands. Napier grass fiber strands treated with 10% NaOH showed optimum tensile strength, modulus, and percentage elongation with an improvement of 51.9, 47.3, and 12.1% respectively. Based on the properties determined for alkali-treated Napier grass fiber strands, we expect that these fibers will be suitable for use as a reinforcement in natural fiber composites.     

Cellulose nanofibers from curaua fibers

Curaua nanofibers extracted under different conditions were investigated. The raw fibers were mercerized with NaOH solutions; they were then submitted to acid hydrolysis using three different types of acids (H₂SO₄, a mixture of H₂SO₄/HCl and HCl). The fibers were analyzed by cellulose, lignin and hemicellulose contents; viscometry, X-ray diffraction (XRD) and thermal stability by thermogravimetric analysis (TG). The nanofibers were morphologically characterized by transmission electron microscopy (TEM) and their surface charges in suspensions were estimated by Zeta-potential. Their degree of polymerization (DP) was characterized by viscometry, crystallinity by XRD and thermal stability by TG. Increasing the NaOH solution concentration in the mercerization, there was a decrease of hemicellulose and lignin contents and consequently an increase of cellulose content. XRD patterns presented changes in the crystal structure from cellulose I to cellulose II when the fibers were mercerized with 17.5% NaOH solution. All curaua nanofibers presented a rod-like shape, an average diameter (D) of 6–10 nm and length (L) of 80–170 nm, with an aspect ratio (L/D) of around 13–17. The mercerization of fibers with NaOH solutions influenced the crystallinity index and thermal stability of the resulting nanofibers. The fibers mercerized with NaOH solution 17.5% resulted in more crystalline nanofibers, but thermally less stable and inferior DP. The aggregation state increases with the amount of HCl introduced into the extraction, due to the decrease of surface charges (as verified by Zeta Potential analysis). However, this release presented nanofibers with better thermal stability than those whose acid hydrolysis was carried out using only H₂SO₄.     

Impact of alkali treatment on physico-chemical,thermal, structural and tensile properties of Carica papaya bark fibers

This study aims to examine the effect of sodium hydroxide (NaOH) treatment on the physico-chemical properties, structure, thermal, tensile and surface topography of Carica papaya fibers (CPFs). The surface of raw CPFs was modified by soaking with 5% NaOH solution for 15, 30, 45, 60, 75 and 90?min. The results of thermo-gravimetric analysis revealed that the optimum treatment time for alkali treatment was 60?min. It was found that the alkali treatment improved the properties of the CPFs. The results of TGA, FT-IR, XRD and AFM suggest that the treated CPF is a suitable alternative as reinforcement in polymer composites.     

Morphological and structural development of hardwood cellulose during mechanochemical pretreatment in solid state through pan-milling

Mechanochemical pretreatment of hardwood cellulose was conducted by our self-designed pan-mill equipment which has an unique and smart structure and can exert strong shear forces and pressure on materials in between and break them down. The structure transformations, including particle size, powder morphology, molecular structure, crystalline structure during milling were investigated by Laser Diffraction Particle Size Analyzer, SEM, FT-IR and WAXD, respectively. Compared with standard method of ball-milling, the pan-mill shows a much higher efficiency in mechanochemical pretreatment of hardwood cellulose. The average particle size reduced to 21 μm and the specific surface area increased to 0.8 m²/g after 40 milling cycles. Mechanical milling also led to collapse of hydrogen bonds and reduction of crystallinity. The crystallinity index of cellulose powder decreased from its original 65 to 22, after milling for 40 cycles. Thermal analysis and solubility testing illustrated that pan-milled cellulose has lower thermal stability and higher solubility in aqueous alkali.     

Isolation of cellulose fibers from kenaf using electron beam

Cellulose fibers were isolated from a kenaf bast fiber using a electron beam irradiation (EBI) treatment. The methods of isolation were based on a hot water treatment after EBI and two-step bleaching processes. FT-IR spectroscopy demonstrated that the content of lignin and hemicellulose in the bleached cellulose fibers treated with various EBI doses decreased with increasing doses of EBI. Specifically, the lignin in the bleached cellulose fibers treated at 300 kGy, was almost completely removed. Moreover, XRD analyses showed that the bleached cellulose fibers treated at 300 kGy presented the highest crystallinity of all the samples treated with EBI. Finally, the morphology of the bleached fiber was characterized by SEM imagery, and the studies showed that the separated degree of bleached cellulose fibers treated with various EBI doses increased with an increase of EBI dose, and the bleached cellulose fibers obtained by EBI treatment at 300 kGy was separated more uniformly than the bleached cellulose fiber obtained by alkali cooking with non-irradiated kenaf fiber.     

13C CPMAS NMR investigations of cellulose polymorphs in different pulps

In order to obtain information about the crystallinity and polymorphs of cellulose, and the occurrence of hemicelluloses in pulp fibers, wood cellulose, bacterial cellulose, cotton linters, viscose, and celluloses in different pulps were investigated by solid state ¹³C CPMAS NMR spectroscopy. A mixed softwood kraft pulp and a dissolving-grade pulp were treated under strongly alkaline and acidic conditions and the effect on cellulose crystallinity was studied. The presence of different crystalline polymorphs of cellulose and the amounts of hemicelluloses are considered.     

Structure and microporous formation of cellulose/silk fibroin blend membranes: Part II. Effect of post-treatment by alkali

Blend membranes (RCF1) were prepared from mixture solution of cellulose and silk fibroin (SF) in cuoxam by coagulating with acetone–acetic acid (4:1 by volume). The blend membranes were subjected to post-treatment with 10% NaOH aqueous solution, and their structure and properties were characterized by FT-IR, X-ray diffraction, DSC, SEM and DMTA. In previous work, cellulose/SF blend membranes (RCF2) prepared by coagulating with 10% NaOH aqueous solution formed a microporous structure, in which the SF as a pore former was almost completely removed from the membrane. However, when the blend membranes RCF1 were immersed in 10% NaOH aqueous solution for post-treatment, a strong hydrogen bonding between cellulose and SF inhibited the removal of SF. Although alkali is a good solvent for SF, the blend membranes RCF1 such obtained from cellulose and SF were alkali resistant. The crystallinity and the mean pore size of the blend membranes slightly decreased with increasing post-treatment time. This work provided a cellulose/silk blend membrane, which can be used under alkaline medium.     

Structure and properties of blend membranes prepared from cellulose and alginate in NaOH/urea aqueous solution

Regenerated cellulose (RC)/alginic acid (AL) blend membranes were satisfactorily prepared from 6 wt % NaOH/4 wt % urea aqueous solution by coagulating with 5 wt % CaCl₂ aqueous solution, and then treated with 3 wt % HCl. Morphology, crystallinity, mechanical properties, and thermal stability of the membranes were investigated by scanning electron microscopy (SEM), IR and UV spectroscopes, X‐ray diffraction, tensile tests, and thermogravimetric analysis (TGA). The RC/AL blends were miscible in all weight ratios of cellulose to alginate. The membranes have homogeneous mesh structures, and the mesh sizes of the blend membranes (200–2000 nm) significantly increased with increasing alginate content. The crystalline state of the AL membrane prepared from 6 wt % NaOH/4 wt % urea aqueous solution was broken completely, and the crystallinity of the blend membranes decreased with an increase of AL. Comparing with AL membranes, the tensile strength and breaking elongation of the blend membranes were obviously improved in dry and wet states. Therefore, the RC/AL blends offer a promising way of alginate as separate and functional materials used in the wet state. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 451–458, 2001     

Mercerization of primary wall cellulose and its implication for the conversion of cellulose I→cellulose II

The mercerization of homogenized primary wall cellulose extracted fromsugar beet pulp was investigated by transmission electron microscopy (TEM),X-ray diffraction together with ¹³C CP-MAS NMR, and FT-IR spectroscopy.For samples resulting from acid extraction, mercerization began at 9% NaOH, whereasfor samples purified by alkaline treatment, the mercerization started at 10%NaOH. The change in morphology when going from cellulose I to cellulose II wasspectacular, as all the microfibrillar cellulose morphology disappeared duringthe treatment. This change in morphology was very drastic as soon as the NaOHconcentrations were increased beyond 8 and 9% for the acid and alkalinepreparedsamples, respectively. On the other hand, the conversion was found to be moreprogressive in terms of increasing NaOH concentration when the transformationwas analyzed by X-ray diffraction or spectroscopy. Our observations of themercerization of isolated cellulose microfibrils are consistent with theconceptof cellulose microfibrils made of parallel chains in cellulose I and crystalsofcellulose II consisting of antiparallel chains.     

Cold NaOH/urea aqueous dissolved cellulose for benzylation: Synthesis and characterization

Cold NaOH/urea aqueous dissolved cellulose was studied for the synthesis of benzyl cellulose by etherification with benzyl chloride. By varying the molar ratios of benzyl chloride to OH groups in cellulose (1.5–4.0) and reaction temperatures (65–70 °C), benzyl cellulose with a degree of substitutions (DS) in the range of 0.29–0.54 was successfully prepared under such mild conditions. The incorporation of benzyl groups into cellulose was evidenced by multiple spectroscopies, including FT IR, ¹H NMR, ¹³C NMR, CP/MAS ¹³C NMR and XRD. In addition, the thermal stability and surface morphology of the benzyl cellulose was also investigated with regard to the degree of substitution. The results indicated that the benzyl cellulose product with a low DS (0.51) in the present study reached the same solubility in many organic solvents as compared to those prepared in heterogeneous media. After benzylation, the sample decomposed at a lower temperature with a wider temperature range, which indicated that the thermal stability of benzyl cellulose was lower than that of the native cellulose. In addition, benzylation resulted in a pronounced reduction in crystallinity as well as a fundamental alteration of morphology of the native cellulose.     

Preparation and characterization of hybrid cationic hydroxyethyl cellulose/sodium alginate polyelectrolyte antimicrobial films

This study aimed to develop polyelectrolyte‐structured antimicrobial food packaging materials that do not contain any antimicrobial agents. Cationic hydroxyethyl cellulose was synthesized and characterized by Fourier‐transform infrared, ¹H NMR, and ¹³C NMR spectroscopy. Its nitrogen content was determined by Kjeldahl method. Polyelectrolyte‐structured antimicrobial food packaging materials were prepared using hydroxyethyl cellulose, cationic hydroxyethyl cellulose, and sodium alginate. Antimicrobial activity of materials was defined by inhibition zone method (disc diffusion method). Thermal stability of samples was evaluated by thermal gravimetric analysis and differential scanning calorimetry. Surface morphology of samples was investigated by SEM. The obtained results prove that produced food packaging materials have good thermal and antimicrobial properties, and they can be used as food packaging material in many industries.     

Exploration on the characteristics of cellulose microfibers from Palmyra palm fruits

To obtain cellulose microfibers from Palmyra palm fruit fibers, a new succession of specific chemical treatments including acidified chlorination, alkalization, and acid hydrolysis have been developed. Cellulose microfibers obtained were characterized by different techniques. The chemical analysis indicated an increase in α-cellulose content and decrease in lignin and hemicellulose for the cellulose microfibers over raw fibers. Fourier transform infrared and ¹³C NMR spectra confirmed the removal of non-cellulosic (lignin and hemicellulose) components after chemical treatments. The X-ray diffraction results revealed that the cellulose I was partly transformed into cellulose II by chemical treatments and the crystallinity index of cellulose microfibers was significantly increased as compared to raw fibers owing to removal of non-cellulosic components. Thermogravimetric analysis results demonstrated that the thermal stability was enhanced noticeably for cellulose microfibers than for the raw fibers. The scanning electron micrographs illustrated cleaner and rough surfaces for the cellulose microfibers when compared to those of raw fibers.     

Investigation of Physico-Chemical Properties of Alkali-Treated Prosopis juliflora Fibers

There is ever-increasing interest in using natural fibers in polymer composite systems and textile industry. Prosopis juliflora fibers (PJFs) possess ideal characteristics that make them suitable for various applications. Alkali treatment of PJFs was primarily aimed to change their physico-chemical properties; 5% (w/v) NaOH concentration and 60 min of soaking time were found to be optimal. It is intriguing to note that optimally treated PJFs had higher cellulose (72.27 wt.%), lower hemicellulose (4.02 wt.%) and lignin (12.09 wt.%) contents, higher crystallinity index (73%), tensile strength, and thermal stability.     

Single stage purification of flax,hemp, and milkweed stem and their physical and morphological properties

Agriculture biomass is an alternative possible solution for the extraction of cellulose, compared to the classical soft and hard wood. However, the valorization of cellulose is challenging for the researchers as it involves multiple steps. In the present study, the raw fibers of flax, hemp, and milkweed stem fibers were purified in single step using hydrogen peroxide in water. By this method authors successfully extracted the purified cellulose fibers without damaging the fiber length. The purified fibers were characterized to understand the thermal, functional, crystalline, and morphological properties by thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The FTIR results showed the effective removal of lignin and significant improvement in thermal stability was observed by TGA. Evidently, the SEM results showed significant improvement in the morphology compared to that of the raw fibers. XRD results showed that the treatment does not affect the crystallinity of the fibers.     

Biobased films prepared from NaOH/thiourea aqueous solution of chitosan and linter cellulose

In the present study, films based on linter cellulose and chitosan were prepared using an aqueous solution of sodium hydroxide (NaOH)/thiourea as the solvent system. The dissolution process of cellulose and chitosan in NaOH/thiourea aqueous solution was followed by the partial chain depolymerization of both biopolymers, which facilitates their solubilization. Biobased films with different chitosan/cellulose ratios were then elaborated by a casting method and subsequent solvent evaporation. They were characterized by X-ray analysis, scanning electron microscopy (SEM), atomic force microscopy (AFM), thermal analysis, and tests related to tensile strength and biodegradation properties. The SEM images of the biofilms with 50/50 and 60/40 ratio of chitosan/cellulose showed surfaces more wrinkled than the others. The AFM images indicated that higher the content of chitosan in the biobased composite film, higher is the average roughness value. It was inferred through thermal analysis that the thermal stability was affected by the presence of chitosan in the films; the initial temperature of decomposition was shifted to lower levels in the presence of chitosan. Results from the tests for tensile strength indicated that the blending of cellulose and chitosan improved the mechanical properties of the films and that an increase in chitosan content led to production of films with higher tensile strength and percentage of elongation. The degradation study in a simulated soil showed that the higher the crystallinity, the lower is the biodegradation rate.