壳聚糖/聚乙二醇/聚丙烯酸复合水凝胶的制备及药物控制释放行为研究

本文以壳聚糖(CS)、聚乙二醇(PEG)和丙烯酸(AA)为原料,制备了复合水凝胶CS/PEG/PAA。研究了负载四种具有不同结构和性质的药物(烟酸、烟酰胺、异烟肼和5-氟尿嘧啶)的复合水凝胶CS/PEG/PAA的药物控制释放行为。结果表明,烟酰胺和异烟肼在pH=1.80的缓冲溶液中的药物累积释放率(R)大于其在pH=6.86的缓冲溶液中的释放率;烟酸却在pH=6.86的缓冲溶液中的药物累积释放率(R)大于其在pH=1.80的缓冲溶液中的释放率。而5-氟尿嘧啶在两种缓冲溶液中的药物累积释放量相当。因此,复合水凝胶CS/PEG/PAA也许可以作为一种新型释放药物的载体。     

壳聚糖-聚丙烯酸复合水凝胶的药物控制释放行为

以壳聚糖(Cs)和丙烯酸(AA)为原料,利用自由基聚合法制备了具有孔洞结构的复合水凝胶Cs-PAA,并研究了AA的量、交联剂的量、聚合温度和AA的中和度对水凝胶溶胀度的影响以及复合水凝胶对烟酸的控制释放。 结果表明,Cs-PAA复合水凝胶具有良好的pH值、离子强度敏感性,且溶胀度最高达1228 g/g,其在pH=686的缓冲溶液中的烟酸累积释放率明显大于其在pH=1.80的缓冲溶液,因此Cs-PAA水凝胶可作为肠口服药物的载体。     

先辐射后冻融法制备聚乙烯醇/水溶性壳聚糖/甘油水凝胶的云南白药药物释放性能研究

采用先辐射后冻融的方法制备了一系列聚乙烯醇(PVA)/水溶性壳聚糖/甘油水凝胶,通过浸泡法在水凝胶中载入云南白药,并且研究了溶液pH值、离子强度、冻融次数和PVA浓度对水凝胶溶胀性能和云南白药释放性能的影响.研究发现水凝胶的溶胀度随溶液离子强度的增大而下降,且酸性溶液大于中性溶液.水溶性壳聚糖的加入有利于云南白药载入凝胶,同时使云南白药的释放具有pH和离子强度敏感性.云南白药的释放量在模拟体液中最大,在中性溶液中次之,在水和酸性溶液中最小,与溶胀度变化关系相反.而水凝胶的溶胀度和云南白药释放量均随冻融次数和PVA浓度的增大而下降.分析表明,云南白药在不同介质中的释放量主要取决于药物和溶液中离子的交换能力;在相同介质中,不同凝胶的药物释放量受溶胀度影响明显.凝胶溶胀速率远大于药物释放速率说明后者主要由扩散过程控制.药物释放的pH敏感性表明该水凝胶具备用作云南白药的口服载体的潜力.     

pH敏感性P(AM-AA-co-C8PhEO10Ac)水凝胶溶胀动力学及其对茶碱的控释

以丙烯酰胺(AM)、丙烯酸(AA)和丙烯酸辛基酚聚氧乙烯醚酯(C8PhEO10Ac)为单体,采用自由基交联共聚法合成了具有pH敏感性的P(AM-AA-co-C8PhEO10Ac)水凝胶.研究了pH、单体配比对凝胶溶胀性能、溶胀动力学和退溶胀动力学的影响.初步探讨了模拟胃液(pH=1.4)、肠液(pH=7.4)中水凝胶对茶碱的控释情况.结果表明:凝胶具有高溶胀、退溶胀速率和良好的pH敏感性等特征;水凝胶的扩散行为在pH=7.4的缓冲溶液中为非Fickian扩散模式;载药凝胶在模拟肠液中对药物的累积释放率明显大于胃液中的累积释放率,其中n(C8PhEO10Ac)∶n(AM)∶n(AA)为1∶20∶30的载药水凝胶对茶碱的累积释放率最大.     

基于埃洛石的载药凝胶小球的制备及性能研究

采用离子凝胶法制备了一种新的壳聚糖-g-聚丙烯酸/埃洛石/海藻酸钠(CTS-g-PAA/HT/SA)凝胶小球。研究了HT含量对载药凝胶小球的溶胀性、包封效率和释放性能等的影响;同时也讨论了凝胶小球的pH敏感性和双氯芬酸钠(DS)的释放行为。结果表明:HT含量对载药凝胶小球的溶胀率、包封效率和累积释放率有明显的影响,在HT含量为30%时,溶胀率、包封效率和12h累积释放率分别达到32.84%、91.07%和100%;另外,载药凝胶小球具有较好的pH敏感性;在pH=2.1的释放介质中DS几乎不释放,而在pH=6.8的释放介质中缓慢释放;DS释药机理为溶胀控释。     

聚丙烯酸盐-丙烯酰胺水凝胶的制备及对重金属离子吸附性能的研究

以丙烯酸(AA)、丙烯酰胺(AM)为单体,K2S2O8为引发剂,N,N'-亚甲基双丙烯酰胺为交联剂,采用水溶液聚合法合成P(AA-AM)水凝胶,通过正交实验优化了P(AA-AM)水凝胶的制备工艺.对制备的P (AA-AM)水凝胶进行了SEM和XPS分析,探讨了P(AA-AM)水凝胶对Cu2+、pb2+、Zn2+和Cd2+的吸附等温线和吸附动力学行为,研究了P(AA-AM)水凝胶的粒径、吸附温度、pH值和重金属离子的初始浓度对P(AA-AM)水凝胶吸附性能的影响.实验结果表明,所制备的P(AA-AM)水凝胶是一种具有三维网络结构的高分子材料,其表面的氨基和羧基残基能够与重金属离子发生螯合反应.减小P(AA-AM)水凝胶粒径、增大溶液pH值、升高吸附环境温度均有利于吸附反应的进行.粒径为0.097 ～0.15 mm的P(AA-AM)水凝胶粉末,在35℃、pH=5的条件下进行吸附等温线实验,得到水凝胶对重金属Cu2+,pb2+,Zn2+和Cd2+的理论最大吸附量分别为186,588,208和403 mg/g.P(AA-AM)水凝胶对重金属离子的吸附符合准二级动力学模型(R2＞0.98),吸附等温线符合Langmuir吸附等温线(R2＞0.95).干扰离子实验和理论模拟均证明P(AA-AM)水凝胶对pb2+具有良好的吸附性.     

含甲基丙烯酸-N,N-二甲氨基乙酯水凝胶的紫外辐射合成及其性质研究

紫外光辐照 ,H2 O2 为光引发剂 ,N ,N′ 亚甲基双丙烯酰胺为交联剂合成了含甲基丙烯酸 N ,N 二甲氨基乙酯的水凝胶 .研究了水溶液中单体、光敏引发剂、交联剂浓度及光照时间对生成的水凝胶的凝胶含量和溶胀性能的影响 ,给出了最佳合成条件 .用该聚合法合成的聚甲基丙烯酸 N ,N 二甲氨基乙酯水凝胶不仅具有较好的透明性和适当的弹性 ,而且在 40℃和 pH =3时有明显的温度及 pH敏感性 .但离子强度对凝胶溶胀性能没有明显影响     

PVA-PAMPS-PAA三元互穿网络型水凝胶的合成及其性能研究

以2-丙烯酰胺基-2-甲基丙磺酸(AMPS)、丙烯酸(AA)以及聚乙烯醇(PVA)为原料,制备了PVA-PAMPS-PAA三元互穿网络型(T-IPN)水凝胶.红外分析表明,PVA与PAA以及PAMPS之间形成了较强的氢键,使得PVA分子上的C—O伸缩震动吸收峰移向了低波数处.X射线衍射以及电镜分析表明,当PVA用量较低时,PVA能均匀的穿插于凝胶网络中,形成完善的互穿网络结构,当PVA用量过高时,部分的PVA结晶而使得凝胶出现相分离.研究了该三元互穿网络型水凝胶的溶胀性能,结果表明,该水凝胶的平衡溶胀比在200至340之间,并且随着AA以及AMPS用量的增加,凝胶的溶胀速率以及平衡溶胀比均升高.该三元互穿网络型水凝胶在酸性溶液中和在碱性溶液中表现出截然不同的消溶胀性能;并且随着溶液pH的升高,凝胶在pH=9.0附近出现体积突变,表现出pH敏感性.通过研究T-IPN水凝胶的抗压缩性能发现,利用线型高分子、柔性高分子网络以及刚性高分子网络制备的三元互穿网络型水凝胶能在高溶胀比下保持较高的强度.溶胀比为180的T-IPN水凝胶,其最大抗压缩强度可达12.1 MPa.进一步研究发现,凝胶的组成以及溶胀比均对凝胶的抗压缩强度和压缩应变均存在较大的影响.     

双重交联VSNPs-PAA纳米复合水凝胶的制备及其溶胀性能的研究

采用自由基聚合法合成了乙烯基硅纳米粒子-聚丙烯酸(VSNPs-PAA)双重交联复合水凝胶,考察了交联剂、引发剂、单体以及p H值、温度、盐溶液等对水凝胶溶胀行为的影响。结果表明,引发剂浓度为0.08%,交联剂浓度为0.1%,单体浓度为80%时,合成的水凝胶溶胀性能最大,吸水率达到5000%以上;该水凝胶不仅具有p H值敏感性和p H值变化下良好的反复性,而且在p H4的酸性溶液中表现出温度敏感性,其溶胀率随温度的升高而增大;水凝胶的溶胀率随着盐溶液浓度的增大而减小。     

麦饭石含量对载药复合凝胶小球释药性能的影响

以瓜尔胶-g-聚丙烯酸/麦饭石复合水凝胶(GG-g-PAA/MS)和海藻酸钠(SA)为原料,双氯芬酸钠(DS)为模拟药物,采用离子凝胶法制备了载药复合凝胶小球,考察了pH敏感性以及MS含量对复合凝胶小球的包封率、载药率、溶胀性和药物释放行为的影响.结果表明:凝胶小球具有明显的pH敏感性,在不同pH介质中溶胀率和释放速率...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.